[<prev] [next>] [day] [month] [year] [list]
Message-ID: <484dafed.0c58560a.4023.669f@mx.google.com>
Date: Mon, 09 Jun 2008 15:34:21 -0700 (PDT)
From: eranian@...glemail.com
To: linux-kernel@...r.kernel.org
Subject: [patch 11/21] perfmon2 minimal: PMU mapping
This patch adds PMU resource description management functions.
Perfmon2 exports a logical view of the PMU with uniform register
names across all architectures. Each logical register is then
map onto an actual PMU register via a mapping table. Such table
exists for each PMU model.
PMU description tables are hardcoded into the kernel and one
is selected during boot.
Signed-off-by: Stephane Eranian <eranian@...il.com>
--
Index: o/perfmon/perfmon_pmu.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ o/perfmon/perfmon_pmu.c 2008-06-04 16:18:33.000000000 +0200
@@ -0,0 +1,255 @@
+/*
+ * perfmon_pmu.c: perfmon2 PMU configuration management
+ *
+ * This file implements the perfmon2 interface which
+ * provides access to the hardware performance counters
+ * of the host processor.
+ *
+ * The initial version of perfmon.c was written by
+ * Ganesh Venkitachalam, IBM Corp.
+ *
+ * Then it was modified for perfmon-1.x by Stephane Eranian and
+ * David Mosberger, Hewlett Packard Co.
+ *
+ * Version Perfmon-2.x is a complete rewrite of perfmon-1.x
+ * by Stephane Eranian, Hewlett Packard Co.
+ *
+ * Copyright (c) 1999-2006 Hewlett-Packard Development Company, L.P.
+ * Contributed by Stephane Eranian <eranian@....hp.com>
+ * David Mosberger-Tang <davidm@....hp.com>
+ *
+ * More information about perfmon available at:
+ * http://perfmon2.sf.net
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <linux/perfmon_kern.h>
+#include "perfmon_priv.h"
+
+#ifndef CONFIG_MODULE_UNLOAD
+#define module_refcount(n) 1
+#endif
+
+static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pfm_pmu_conf_lock);
+
+static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pfm_pmu_acq_lock);
+static u32 pfm_pmu_acquired;
+
+/*
+ * perfmon core must acces PMU information ONLY through pfm_pmu_conf
+ * if pfm_pmu_conf is NULL, then no description is registered
+ */
+struct pfm_pmu_config *pfm_pmu_conf;
+EXPORT_SYMBOL(pfm_pmu_conf);
+
+static int pfm_pmu_regdesc_init(u64 *unavail_pmcs, u64 *unavail_pmds)
+{
+ struct pfm_regmap_desc *d;
+ u16 n, n2, n_counters, i;
+ int max1, max2, max3;
+
+ /*
+ * compute the number of implemented PMC from the
+ * description table
+ */
+ n = 0;
+ max1 = max2 = -1;
+ d = pfm_pmu_conf->pmc_desc;
+ for (i = 0; i < pfm_pmu_conf->num_pmc_entries; i++, d++) {
+ if (!(d->type & PFM_REG_I))
+ continue;
+
+ if (test_bit(i, cast_ulp(unavail_pmcs)))
+ continue;
+
+ __set_bit(i, cast_ulp(pfm_pmu_conf->regs.pmcs));
+
+ max1 = i;
+ n++;
+ }
+
+ if (!n) {
+ PFM_INFO("%s PMU description has no PMC registers",
+ pfm_pmu_conf->pmu_name);
+ return -EINVAL;
+ }
+
+ pfm_pmu_conf->regs.max_pmc = max1 + 1;
+ pfm_pmu_conf->regs.num_pmcs = n;
+
+ n = n_counters = n2 = 0;
+ max1 = max2 = max3 = -1;
+ d = pfm_pmu_conf->pmd_desc;
+ for (i = 0; i < pfm_pmu_conf->num_pmd_entries; i++, d++) {
+ if (!(d->type & PFM_REG_I))
+ continue;
+
+ if (test_bit(i, cast_ulp(unavail_pmds)))
+ continue;
+
+ __set_bit(i, cast_ulp(pfm_pmu_conf->regs.pmds));
+ max1 = i;
+ n++;
+
+ /*
+ * read-write registers
+ */
+ if (!(d->type & PFM_REG_RO)) {
+ __set_bit(i, cast_ulp(pfm_pmu_conf->regs.rw_pmds));
+ max3 = i;
+ n2++;
+ }
+
+ /*
+ * counter registers
+ */
+ if (d->type & PFM_REG_C64) {
+ __set_bit(i, cast_ulp(pfm_pmu_conf->regs.cnt_pmds));
+ n_counters++;
+ }
+
+ /*
+ * PMD with intr capabilities
+ */
+ if (d->type & PFM_REG_INTR) {
+ __set_bit(i, cast_ulp(pfm_pmu_conf->regs.intr_pmds));
+ max2 = i;
+ }
+ }
+
+ if (!n) {
+ PFM_INFO("%s PMU description has no PMD registers",
+ pfm_pmu_conf->pmu_name);
+ return -EINVAL;
+ }
+
+ pfm_pmu_conf->regs.max_pmd = max1 + 1;
+ pfm_pmu_conf->regs.max_intr_pmd = max2 + 1;
+
+ pfm_pmu_conf->regs.num_counters = n_counters;
+ pfm_pmu_conf->regs.num_pmds = n;
+ pfm_pmu_conf->regs.max_rw_pmd = max3 + 1;
+ pfm_pmu_conf->regs.num_rw_pmd = n2;
+
+ return 0;
+}
+
+int pfm_pmu_register(struct pfm_pmu_config *cfg)
+{
+ int ret = -EBUSY;
+
+ if (perfmon_disabled) {
+ PFM_INFO("perfmon disabled, cannot add PMU description");
+ return -ENOSYS;
+ }
+
+ spin_lock(&pfm_pmu_conf_lock);
+
+ if (pfm_pmu_conf)
+ goto unlock;
+
+ pfm_pmu_conf = cfg;
+ pfm_pmu_conf->ovfl_mask = (1ULL << cfg->counter_width) - 1;
+
+unlock:
+ spin_unlock(&pfm_pmu_conf_lock);
+
+ if (ret)
+ PFM_INFO("register %s PMU error %d", cfg->pmu_name, ret);
+ else
+ PFM_INFO("%s PMU installed", cfg->pmu_name);
+ return ret;
+}
+
+/*
+ * acquire PMU resource from lower-level PMU register allocator
+ * (currently perfctr-watchdog.c)
+ *
+ * acquisition is done when the first context is created (and not
+ * when it is loaded). We grab all that is defined in the description
+ * module and then we make adjustments at the arch-specific level.
+ *
+ * The PMU resource is released when the last perfmon context is
+ * destroyed.
+ *
+ * interrupts are not masked
+ */
+int pfm_pmu_acquire(void)
+{
+ u64 unavail_pmcs[PFM_PMC_BV];
+ u64 unavail_pmds[PFM_PMD_BV];
+ int ret = 0;
+
+ spin_lock(&pfm_pmu_acq_lock);
+
+ PFM_DBG("pmu_acquired=%d", pfm_pmu_acquired);
+
+ pfm_pmu_acquired++;
+
+ if (pfm_pmu_acquired == 1) {
+
+ memset(unavail_pmcs, 0, sizeof(unavail_pmcs));
+ memset(unavail_pmds, 0, sizeof(unavail_pmds));
+
+ ret = pfm_arch_pmu_acquire(unavail_pmcs, unavail_pmds);
+ if (ret) {
+ pfm_pmu_acquired--;
+ } else {
+ pfm_pmu_regdesc_init(unavail_pmcs, unavail_pmds);
+
+ /* available PMU ressources */
+ PFM_DBG("PMU acquired: %u PMCs, %u PMDs, %u counters",
+ pfm_pmu_conf->regs.num_pmcs,
+ pfm_pmu_conf->regs.num_pmds,
+ pfm_pmu_conf->regs.num_counters);
+ }
+ }
+ spin_unlock(&pfm_pmu_acq_lock);
+
+ return ret;
+}
+
+/*
+ * release the PMU resource
+ *
+ * actual release happens when last context is destroyed
+ *
+ * interrupts are not masked
+ */
+void pfm_pmu_release(void)
+{
+ BUG_ON(irqs_disabled());
+
+ /*
+ * we need to use a spinlock because release takes some time
+ * and we may have a race with pfm_pmu_acquire()
+ */
+ spin_lock(&pfm_pmu_acq_lock);
+
+ PFM_DBG("pmu_acquired=%d", pfm_pmu_acquired);
+
+ /*
+ * we decouple test and decrement because if we had errors
+ * in pfm_pmu_acquire(), we still come here on pfm_context_free()
+ * but with pfm_pmu_acquire=0
+ */
+ if (pfm_pmu_acquired > 0 && --pfm_pmu_acquired == 0) {
+ pfm_arch_pmu_release();
+ memset(&pfm_pmu_conf->regs, 0, sizeof(pfm_pmu_conf->regs));
+ PFM_DBG("PMU released");
+ }
+ spin_unlock(&pfm_pmu_acq_lock);
+}
Index: o/perfmon/Makefile
===================================================================
--- o.orig/perfmon/Makefile 2008-06-04 16:18:22.000000000 +0200
+++ o/perfmon/Makefile 2008-06-04 16:18:33.000000000 +0200
@@ -5,4 +5,4 @@
obj-$(CONFIG_PERFMON) = perfmon_ctx.o perfmon_ctxsw.o \
perfmon_file.o perfmon_attach.o \
perfmon_res.o perfmon_init.o \
- perfmon_intr.o
+ perfmon_intr.o perfmon_pmu.o
Index: o/perfmon/perfmon_priv.h
===================================================================
--- o.orig/perfmon/perfmon_priv.h 2008-06-04 16:18:42.000000000 +0200
+++ o/perfmon/perfmon_priv.h 2008-06-04 16:18:47.000000000 +0200
@@ -52,6 +52,9 @@
void pfm_free_context(struct pfm_context *ctx);
+int pfm_pmu_acquire(void);
+void pfm_pmu_release(void);
+
void pfm_save_pmds(struct pfm_context *ctx);
/*
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists