[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1213252870-20474-12-git-send-email-petkovbb@gmail.com>
Date: Thu, 12 Jun 2008 08:41:03 +0200
From: Borislav Petkov <petkovbb@...glemail.com>
To: <bzolnier@...il.com>
Cc: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
Borislav Petkov <petkovbb@...il.com>
Subject: [PATCH 11/18] ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
... by factoring out the rq preparation code into a separate
function called in the request routine. Bart: As a nice
side effect, this minimizes the IRQ handler execution time.
There should be no functionality change resulting from this patch.
Signed-off-by: Borislav Petkov <petkovbb@...il.com>
---
drivers/ide/ide-cd.c | 29 ++++++++++++++++++++---------
1 files changed, 20 insertions(+), 9 deletions(-)
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index da0f28c..a5715b1 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -691,16 +691,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
+ struct request *rq)
{
- struct request *rq = HWGROUP(drive)->rq;
-
if (rq_data_dir(rq) == READ) {
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
@@ -737,6 +730,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
/* set up the command */
rq->timeout = ATAPI_WAIT_PC;
+ return ide_started;
+}
+
+/*
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
+ */
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+{
+ struct request *rq = HWGROUP(drive)->rq;
+
/* send the command to the drive and return */
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
@@ -1238,10 +1244,15 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
} else {
xferlen = 32768;
fn = cdrom_start_rw_cont;
+
if (cdrom_start_rw(drive, rq) == ide_stopped)
return ide_stopped;
+
+ if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+ return ide_stopped;
}
info->last_block = block;
+
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
xferlen = rq->data_len;
--
1.5.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists