Linux version 2.6.26-rc6-git2 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sun Jun 15 15:12:52 PDT 2008 Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54410@139.185.50.77/eth0,54410@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. Entering add_active_range(0, 1, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523856) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2621439) 2 entries of 3200 used max_pfn_mapped = 2621439 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò 162E) ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE50100, 0040 ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò 162E) ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 1, 159) 0 entries of 3200 used SRAT: Node 0 PXM 0 100000-80000000 Entering add_active_range(0, 256, 523856) 1 entries of 3200 used SRAT: Node 0 PXM 0 100000000-180000000 Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used SRAT: Node 1 PXM 1 180000000-280000000 Entering add_active_range(1, 1572864, 2621439) 3 entries of 3200 used NUMA: Allocated memnodemap from 12000 - 17080 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [0000000000018000 - 0000000000047fff] pages 30 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-84a3af] TEXT DATA BSS early res: 3 [7fd05000-7fe4f6b0] RAMDISK early res: 4 [9f400-fffff] BIOS reserved early res: 5 [8000-11fff] PGTABLE early res: 6 [12000-1707f] MEMNODEMAP Bootmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180003fff] bootmap [0000000180004000 - 0000000180023fff] pages 20 [ffffe20000000000-ffffe200049fffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ffffe20004a00000-ffffe200053fffff] PMD -> [ffff81000c000000-ffff81000c9fffff] on node 0 [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff810180200000-ffff8101839fffff] on node 1 Zone PFN ranges: DMA 1 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2621439 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 1 -> 159 0: 256 -> 523856 0: 1048576 -> 1572864 1: 1572864 -> 2621439 On node 0 totalpages: 1048046 DMA zone: 56 pages used for memmap DMA zone: 1726 pages reserved DMA zone: 2216 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 Movable zone: 0 pages used for memmap On node 1 totalpages: 1048575 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034239 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 36528 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4 Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2059055 Policy zone: Normal Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54410@139.185.50.77/eth0,54410@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1004.629 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ c000000 size 64 MB Aperture pointing to e820 RAM. Ignoring. No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 PM: Registered nosave memory: 0000000004000000 - 0000000008000000 Memory: 8197832k/10485756k available (3370k kernel code, 188652k reserved, 1711k data, 344k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 hpet clockevent registered Calibrating delay using timer specific routine.. 2010.73 BogoMIPS (lpj=4021462) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20080321 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557859 Detected 12.557 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2009.34 BogoMIPS (lpj=4018698) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 2009.42 BogoMIPS (lpj=4018853) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 2009.33 BogoMIPS (lpj=4018667) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (8038.84 BogoMIPS). khelper used greatest stack depth: 5976 bytes left calling init_cpufreq_transition_notifier_list+0x0/0x1b initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs calling net_ns_init+0x0/0x15d net_namespace: 368 bytes initcall net_ns_init+0x0/0x15d returned 0 after 3 msecs calling cpufreq_tsc+0x0/0x16 initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs calling init_smp_flush+0x0/0x49 initcall init_smp_flush+0x0/0x49 returned 0 after 0 msecs calling sysctl_init+0x0/0x32 initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs calling ksysfs_init+0x0/0xbb initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0x12 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs calling pm_init+0x0/0x34 initcall pm_init+0x0/0x34 returned 0 after 0 msecs calling pm_disk_init+0x0/0x19 initcall pm_disk_init+0x0/0x19 returned 0 after 0 msecs calling swsusp_header_init+0x0/0x2c initcall swsusp_header_init+0x0/0x2c returned 0 after 0 msecs calling filelock_init+0x0/0x2e initcall filelock_init+0x0/0x2e returned 0 after 0 msecs calling init_misc_binfmt+0x0/0x3f initcall init_misc_binfmt+0x0/0x3f returned 0 after 0 msecs calling init_script_binfmt+0x0/0x12 initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_elf_binfmt+0x0/0x12 initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_compat_elf_binfmt+0x0/0x12 initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling debugfs_init+0x0/0x51 initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs calling random32_init+0x0/0x58 initcall random32_init+0x0/0x58 returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x75 initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 msecs calling cpuidle_init+0x0/0x40 initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs calling sock_init+0x0/0x59 initcall sock_init+0x0/0x59 returned 0 after 0 msecs calling netpoll_init+0x0/0x31 initcall netpoll_init+0x0/0x31 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x14d NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14d returned 0 after 0 msecs calling bdi_class_init+0x0/0x3d initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x45 initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x12 initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs calling pci_driver_init+0x0/0x12 initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs calling backlight_class_init+0x0/0x49 initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs calling tty_class_init+0x0/0x2a initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs calling vtconsole_class_init+0x0/0xba initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs calling register_node_type+0x0/0x6b initcall register_node_type+0x0/0x6b returned 0 after 0 msecs calling early_fill_mp_bus_info+0x0/0x7ed node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] bus: 40 index 2 mmio: [84000000, 8fffffff] initcall early_fill_mp_bus_info+0x0/0x7ed returned 0 after 3 msecs calling arch_kdebugfs_init+0x0/0x8 initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs calling mtrr_if_init+0x0/0x77 initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs calling ffh_cstate_init+0x0/0x31 initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs initcall ffh_cstate_init+0x0/0x31 returned with error code -1 calling acpi_pci_init+0x0/0x4a ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x4a returned 0 after 0 msecs calling init_acpi_device_notify+0x0/0x4b initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs calling dmi_id_init+0x0/0x2e9 initcall dmi_id_init+0x0/0x2e9 returned 0 after 0 msecs calling pci_access_init+0x0/0x4e PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. initcall pci_access_init+0x0/0x4e returned 0 after 0 msecs calling topology_init+0x0/0x7c initcall topology_init+0x0/0x7c returned 0 after 0 msecs calling mtrr_init_finialize+0x0/0x34 initcall mtrr_init_finialize+0x0/0x34 returned 0 after 0 msecs calling param_sysfs_init+0x0/0x1e7 initcall param_sysfs_init+0x0/0x1e7 returned 0 after 3 msecs calling pm_sysrq_init+0x0/0x19 initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs calling readahead_init+0x0/0x38 initcall readahead_init+0x0/0x38 returned 0 after 0 msecs calling init_bio+0x0/0xc5 initcall init_bio+0x0/0xc5 returned 0 after 0 msecs calling blk_settings_init+0x0/0x2a initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs calling blk_ioc_init+0x0/0x2a initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs calling genhd_device_init+0x0/0x40 initcall genhd_device_init+0x0/0x40 returned 0 after 0 msecs calling fbmem_init+0x0/0x8a initcall fbmem_init+0x0/0x8a returned 0 after 0 msecs calling acpi_init+0x0/0x21d ACPI: EC: Look up EC in DSDT ACPI: SSDT 7FE58000, 04F0 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: MCFG area at 80000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at 80000000 - 8fffffff initcall acpi_init+0x0/0x21d returned 0 after 30 msecs calling acpi_scan_init+0x0/0x11e initcall acpi_scan_init+0x0/0x11e returned 0 after 7 msecs calling acpi_ec_init+0x0/0x61 initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs calling acpi_pci_root_init+0x0/0x28 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [f7de0000, f7de0fff] PCI: 0000:00:02.1 reg 10 32bit mmio: [f7dd0000, f7dd00ff] PCI: 0000:01:03.0 reg 10 32bit mmio: [e8000000, efffffff] PCI: 0000:01:03.0 reg 14 io port: [1000, 10ff] PCI: 0000:01:03.0 reg 18 32bit mmio: [f7ff0000, f7ffffff] PCI: 0000:01:04.0 reg 10 io port: [2800, 28ff] PCI: 0000:01:04.0 reg 14 32bit mmio: [f7fe0000, f7fe01ff] PCI: 0000:01:04.2 reg 10 io port: [1400, 14ff] PCI: 0000:01:04.2 reg 14 32bit mmio: [f7fd0000, f7fd07ff] PCI: 0000:01:04.2 reg 18 32bit mmio: [f7fc0000, f7fc1fff] PCI: 0000:01:04.2 reg 1c 32bit mmio: [f7f00000, f7f7ffff] PCI: 0000:01:04.4 reg 20 io port: [1800, 181f] PCI: 0000:01:04.6 reg 10 32bit mmio: [f7ef0000, f7ef00ff] PCI: Transparent bridge - 0000:00:09.0 PCI: bridge 0000:00:09.0 io port: [1000, 2fff] PCI: bridge 0000:00:09.0 32bit mmio: [f7e00000, f7ffffff] PCI: bridge 0000:00:09.0 32bit mmio pref: [e8000000, efffffff] PCI: bridge 0000:00:0b.0 32bit mmio: [f8000000, f9ffffff] PCI: bridge 0000:00:0b.0 64bit mmio pref: [90000000, 900fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [f8000000, f9ffffff] PCI: bridge 0000:02:00.0 32bit mmio: [f8000000, f9ffffff] PCI: bridge 0000:02:00.0 64bit mmio pref: [90000000, 900fffff] PCI: bridge 0000:00:0c.0 32bit mmio: [fa000000, fbffffff] PCI: bridge 0000:00:0c.0 64bit mmio pref: [90100000, 901fffff] PCI: 0000:05:00.0 reg 10 64bit mmio: [fa000000, fbffffff] PCI: bridge 0000:04:00.0 32bit mmio: [fa000000, fbffffff] PCI: bridge 0000:04:00.0 64bit mmio pref: [90100000, 901fffff] PCI: bridge 0000:00:0d.0 32bit mmio: [fdc00000, fdcfffff] PCI: 0000:07:04.0 reg 10 64bit mmio: [fdcf0000, fdcfffff] PCI: 0000:07:04.0 reg 18 64bit mmio: [fdce0000, fdceffff] PCI: 0000:07:04.1 reg 10 64bit mmio: [fdcd0000, fdcdffff] PCI: 0000:07:04.1 reg 18 64bit mmio: [fdcc0000, fdccffff] PCI: bridge 0000:06:00.0 32bit mmio: [fdc00000, fdcfffff] PCI: 0000:08:00.0 reg 10 64bit mmio: [fddf0000, fddf0fff] PCI: 0000:08:00.0 reg 18 64bit mmio: [fdde0000, fdde00ff] PCI: 0000:08:00.0 reg 20 io port: [3000, 30ff] PCI: 0000:08:00.1 reg 10 64bit mmio: [fddd0000, fddd0fff] PCI: 0000:08:00.1 reg 18 64bit mmio: [fddc0000, fddc00ff] PCI: 0000:08:00.1 reg 20 io port: [3400, 34ff] PCI: bridge 0000:00:0e.0 io port: [3000, 3fff] PCI: bridge 0000:00:0e.0 32bit mmio: [fdd00000, fddfffff] PCI: bridge 0000:00:0e.0 64bit mmio pref: [90200000, 902fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) PCI: 0000:40:01.0 reg 14 32bit mmio: [fdef0000, fdef0fff] PCI: bridge 0000:40:0c.0 io port: [4000, 4fff] PCI: bridge 0000:40:0c.0 32bit mmio: [fdf00000, fdffffff] PCI: bridge 0000:40:0c.0 64bit mmio pref: [90300000, 903fffff] PCI: 0000:42:08.0 reg 10 64bit mmio: [fdf80000, fdffffff] PCI: 0000:42:08.0 reg 18 io port: [4000, 40ff] PCI: 0000:42:08.0 reg 1c 32bit mmio: [fdf70000, fdf77fff] PCI: bridge 0000:41:00.0 io port: [4000, 4fff] PCI: bridge 0000:41:00.0 32bit mmio: [fdf00000, fdffffff] PCI: bridge 0000:41:00.0 64bit mmio pref: [90300000, 903fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 22 msecs calling acpi_pci_link_init+0x0/0x48 ACPI: PCI Interrupt Link [LNKW] (IRQs *16) ACPI: PCI Interrupt Link [LNKX] (IRQs *17) ACPI: PCI Interrupt Link [LNKY] (IRQs *18) ACPI: PCI Interrupt Link [LNKZ] (IRQs *19) ACPI: PCI Interrupt Link [LNU0] (IRQs *22) ACPI: PCI Interrupt Link [LNU2] (IRQs *23) ACPI: PCI Interrupt Link [LNKA] (IRQs *54) ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. initcall acpi_pci_link_init+0x0/0x48 returned 0 after 7 msecs calling acpi_power_init+0x0/0x77 initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs calling acpi_system_init+0x0/0x260 initcall acpi_system_init+0x0/0x260 returned 0 after 0 msecs calling acpi_cm_sbs_init+0x0/0x8 initcall acpi_cm_sbs_init+0x0/0x8 returned 0 after 0 msecs calling pnp_init+0x0/0x20 Linux Plug and Play Support v0.97 (c) Adam Belay initcall pnp_init+0x0/0x20 returned 0 after 0 msecs calling pnpacpi_init+0x0/0x8c pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 7 msecs calling misc_init+0x0/0x98 initcall misc_init+0x0/0x98 returned 0 after 0 msecs calling cn_init+0x0/0xcb initcall cn_init+0x0/0xcb returned 0 after 0 msecs calling phy_init+0x0/0x31 initcall phy_init+0x0/0x31 returned 0 after 0 msecs calling init_scsi+0x0/0x91 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 3 msecs calling usb_init+0x0/0x122 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x122 returned 0 after 0 msecs calling serio_init+0x0/0x89 initcall serio_init+0x0/0x89 returned 0 after 0 msecs calling input_init+0x0/0x107 initcall input_init+0x0/0x107 returned 0 after 0 msecs calling rtc_init+0x0/0x70 initcall rtc_init+0x0/0x70 returned 0 after 0 msecs calling i2c_init+0x0/0x5f initcall i2c_init+0x0/0x5f returned 0 after 3 msecs calling power_supply_class_init+0x0/0x34 initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs calling hwmon_init+0x0/0x3b initcall hwmon_init+0x0/0x3b returned 0 after 0 msecs calling thermal_init+0x0/0x51 initcall thermal_init+0x0/0x51 returned 0 after 0 msecs calling pci_acpi_init+0x0/0x96 PCI: Using ACPI for IRQ routing initcall pci_acpi_init+0x0/0x96 returned 0 after 0 msecs calling pci_legacy_init+0x0/0x11d initcall pci_legacy_init+0x0/0x11d returned 0 after 0 msecs calling pcibios_irq_init+0x0/0x4b2 initcall pcibios_irq_init+0x0/0x4b2 returned 0 after 0 msecs calling pcibios_init+0x0/0x74 PCI: Cannot allocate resource region 9 of bridge 0000:40:0c.0 PCI: Cannot allocate resource region 9 of bridge 0000:41:00.0 initcall pcibios_init+0x0/0x74 returned 0 after 0 msecs calling proto_init+0x0/0x2e initcall proto_init+0x0/0x2e returned 0 after 0 msecs calling net_dev_init+0x0/0x153 initcall net_dev_init+0x0/0x153 returned 0 after 0 msecs calling neigh_init+0x0/0x71 initcall neigh_init+0x0/0x71 returned 0 after 0 msecs calling fib_rules_init+0x0/0xa6 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs calling genl_init+0x0/0xd5 initcall genl_init+0x0/0xd5 returned 0 after 15 msecs calling sysctl_init+0x0/0x2d initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs calling pci_iommu_init+0x0/0x12 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture initcall pci_iommu_init+0x0/0x12 returned 0 after 3 msecs calling hpet_late_init+0x0/0x10d hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz initcall hpet_late_init+0x0/0x10d returned 0 after 0 msecs calling clocksource_done_booting+0x0/0x12 initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs calling init_pipe_fs+0x0/0x4c initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs calling init_mnt_writers+0x0/0x4f initcall init_mnt_writers+0x0/0x4f returned 0 after 0 msecs calling eventpoll_init+0x0/0x85 initcall eventpoll_init+0x0/0x85 returned 0 after 0 msecs calling anon_inode_init+0x0/0x115 initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs calling acpi_rtc_init+0x0/0xe7 initcall acpi_rtc_init+0x0/0xe7 returned 0 after 0 msecs calling acpi_event_init+0x0/0x80 initcall acpi_event_init+0x0/0x80 returned 0 after 13 msecs calling pnp_system_init+0x0/0x12 system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved initcall pnp_system_init+0x0/0x12 returned 0 after 3 msecs calling chr_dev_init+0x0/0x98 initcall chr_dev_init+0x0/0x98 returned 0 after 0 msecs calling firmware_class_init+0x0/0x72 initcall firmware_class_init+0x0/0x72 returned 0 after 0 msecs calling loopback_init+0x0/0x12 initcall loopback_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0x12 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_userspace_init+0x0/0x12 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs calling init_acpi_pm_clocksource+0x0/0xa4 initcall init_acpi_pm_clocksource+0x0/0xa4 returned 0 after 0 msecs calling ssb_modinit+0x0/0x4a initcall ssb_modinit+0x0/0x4a returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x87 PCI: Bridge: 0000:00:09.0 IO window: 1000-2fff MEM window: 0xf7e00000-0xf7ffffff PREFETCH window: 0x00000000e8000000-0x00000000efffffff PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x0000000090000000-0x00000000900fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x0000000090000000-0x00000000900fffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x0000000090100000-0x00000000901fffff PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x0000000090100000-0x00000000901fffff PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: 0x0000000090300000-0x00000000903fffff PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: 0x0000000090300000-0x00000000903fffff PCI: Bridge: 0000:00:0e.0 IO window: 3000-3fff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: 0x0000000090200000-0x00000000902fffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:06:00.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:42:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:41:00.0 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000084000000-0x00000000840fffff PCI: Bridge: 0000:40:0c.0 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000084000000-0x00000000840fffff PCI: Bridge: 0000:40:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:40:0c.0 to 64 PCI: Setting latency timer of device 0000:41:00.0 to 64 PCI: Setting latency timer of device 0000:40:0d.0 to 64 PCI: Setting latency timer of device 0000:40:0e.0 to 64 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: 01 index 0 io port: [1000, 2fff] bus: 01 index 1 mmio: [f7e00000, f7ffffff] bus: 01 index 2 mmio: [e8000000, efffffff] bus: 01 index 3 io port: [0, 3fff] bus: 01 index 4 mmio: [90000000, fddfffff] bus: 01 index 5 mmio: [80000000, 83ffffff] bus: 01 index 6 mmio: [a0000, bffff] bus: 01 index 7 mmio: [fe000000, ffffffff] bus: 01 index 8 mmio: [280000000, fcffffffff] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [f8000000, f9ffffff] bus: 02 index 2 mmio: [90000000, 900fffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [f8000000, f9ffffff] bus: 03 index 2 mmio: [90000000, 900fffff] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [fa000000, fbffffff] bus: 04 index 2 mmio: [90100000, 901fffff] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [fa000000, fbffffff] bus: 05 index 2 mmio: [90100000, 901fffff] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [fdc00000, fdcfffff] bus: 06 index 2 mmio: [90300000, 903fffff] bus: 06 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [fdc00000, fdcfffff] bus: 07 index 2 mmio: [90300000, 903fffff] bus: 07 index 3 mmio: [0, 0] bus: 08 index 0 io port: [3000, 3fff] bus: 08 index 1 mmio: [fdd00000, fddfffff] bus: 08 index 2 mmio: [90200000, 902fffff] bus: 08 index 3 mmio: [0, 0] bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] bus: 40 index 2 mmio: [84000000, 8fffffff] bus: 41 index 0 io port: [4000, 4fff] bus: 41 index 1 mmio: [fdf00000, fdffffff] bus: 41 index 2 mmio: [84000000, 840fffff] bus: 41 index 3 mmio: [0, 0] bus: 42 index 0 io port: [4000, 4fff] bus: 42 index 1 mmio: [fdf00000, fdffffff] bus: 42 index 2 mmio: [84000000, 840fffff] bus: 42 index 3 mmio: [0, 0] bus: 43 index 0 mmio: [0, 0] bus: 43 index 1 mmio: [0, 0] bus: 43 index 2 mmio: [0, 0] bus: 43 index 3 mmio: [0, 0] bus: 44 index 0 mmio: [0, 0] bus: 44 index 1 mmio: [0, 0] bus: 44 index 2 mmio: [0, 0] bus: 44 index 3 mmio: [0, 0] bus: 47 index 0 mmio: [0, 0] bus: 47 index 1 mmio: [0, 0] bus: 47 index 2 mmio: [0, 0] bus: 47 index 3 mmio: [0, 0] initcall pcibios_assign_resources+0x0/0x87 returned 0 after 27 msecs calling inet_init+0x0/0x350 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x350 returned 0 after 63 msecs calling af_unix_init+0x0/0x55 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 0 msecs calling populate_rootfs+0x0/0xea checking if image is initramfs... it is Freeing initrd memory: 1321k freed initcall populate_rootfs+0x0/0xea returned 0 after 160 msecs calling i8259A_init_sysfs+0x0/0x22 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs calling vsyscall_init+0x0/0x6e initcall vsyscall_init+0x0/0x6e returned 0 after 0 msecs calling sbf_init+0x0/0xd7 initcall sbf_init+0x0/0xd7 returned 0 after 0 msecs calling i8237A_init_sysfs+0x0/0x22 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs calling add_rtc_cmos+0x0/0x1d initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs calling cache_sysfs_init+0x0/0x5d initcall cache_sysfs_init+0x0/0x5d returned 0 after 1 msecs calling mce_init_device+0x0/0x85 initcall mce_init_device+0x0/0x85 returned 0 after 0 msecs calling periodic_mcheck_init+0x0/0x3f initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs calling thermal_throttle_init_device+0x0/0x83 initcall thermal_throttle_init_device+0x0/0x83 returned 0 after 0 msecs calling threshold_init_device+0x0/0x49 initcall threshold_init_device+0x0/0x49 returned 0 after 0 msecs calling msr_init+0x0/0xf2 initcall msr_init+0x0/0xf2 returned 0 after 0 msecs calling cpuid_init+0x0/0xf2 initcall cpuid_init+0x0/0xf2 returned 0 after 0 msecs calling microcode_init+0x0/0xbf microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor microcode: CPU2 not a capable Intel processor microcode: CPU3 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a initcall microcode_init+0x0/0xbf returned 0 after 1 msecs calling init_lapic_sysfs+0x0/0x2d initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs calling ioapic_init_sysfs+0x0/0x99 initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs calling add_pcspkr+0x0/0x43 initcall add_pcspkr+0x0/0x43 returned 0 after 0 msecs calling audit_classes_init+0x0/0xaf initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs calling init_vdso_vars+0x0/0x1e7 initcall init_vdso_vars+0x0/0x1e7 returned 0 after 0 msecs calling ia32_binfmt_init+0x0/0x14 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs calling sysenter_setup+0x0/0x29f initcall sysenter_setup+0x0/0x29f returned 0 after 0 msecs calling init_aout_binfmt+0x0/0x12 initcall init_aout_binfmt+0x0/0x12 returned 0 after 0 msecs calling create_proc_profile+0x0/0x307 initcall create_proc_profile+0x0/0x307 returned 0 after 0 msecs calling ioresources_init+0x0/0x3c initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs calling uid_cache_init+0x0/0x69 initcall uid_cache_init+0x0/0x69 returned 0 after 0 msecs calling init_posix_timers+0x0/0xb6 initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs calling init_posix_cpu_timers+0x0/0xd4 initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs calling nsproxy_cache_init+0x0/0x2d initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs calling timekeeping_init_device+0x0/0x22 initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs calling init_clocksource_sysfs+0x0/0x50 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs calling init_timer_list_procfs+0x0/0x2c initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs calling init_tstats_procfs+0x0/0x2c initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs calling futex_init+0x0/0x63 initcall futex_init+0x0/0x63 returned 0 after 0 msecs calling proc_dma_init+0x0/0x22 initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs calling percpu_modinit+0x0/0x6f initcall percpu_modinit+0x0/0x6f returned 0 after 0 msecs calling kallsyms_init+0x0/0x25 initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs calling snapshot_device_init+0x0/0x12 initcall snapshot_device_init+0x0/0x12 returned 0 after 0 msecs calling crash_save_vmcoreinfo_init+0x0/0x42b initcall crash_save_vmcoreinfo_init+0x0/0x42b returned 0 after 0 msecs calling crash_notes_memory_init+0x0/0x3d initcall crash_notes_memory_init+0x0/0x3d returned 0 after 0 msecs calling ikconfig_init+0x0/0x39 initcall ikconfig_init+0x0/0x39 returned 0 after 0 msecs calling audit_init+0x0/0x14d audit: initializing netlink socket (disabled) type=2000 audit(1213542831.899:1): initialized initcall audit_init+0x0/0x14d returned 0 after 0 msecs calling audit_tree_init+0x0/0x49 initcall audit_tree_init+0x0/0x49 returned 0 after 0 msecs calling init_kprobes+0x0/0x103 initcall init_kprobes+0x0/0x103 returned 0 after 5 msecs calling relay_init+0x0/0x14 initcall relay_init+0x0/0x14 returned 0 after 0 msecs calling utsname_sysctl_init+0x0/0x14 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs calling init_per_zone_pages_min+0x0/0x53 initcall init_per_zone_pages_min+0x0/0x53 returned 0 after 0 msecs calling pdflush_init+0x0/0x1d initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs calling kswapd_init+0x0/0x63 initcall kswapd_init+0x0/0x63 returned 0 after 0 msecs calling setup_vmstat+0x0/0x4a initcall setup_vmstat+0x0/0x4a returned 0 after 0 msecs calling procswaps_init+0x0/0x22 initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs calling hugetlb_init+0x0/0x98 Total HugeTLB memory allocated, 0 initcall hugetlb_init+0x0/0x98 returned 0 after 0 msecs calling init_tmpfs+0x0/0xda initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs calling slab_sysfs_init+0x0/0xf0 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 5 msecs calling fasync_init+0x0/0x2a initcall fasync_init+0x0/0x2a returned 0 after 0 msecs calling aio_setup+0x0/0x6e initcall aio_setup+0x0/0x6e returned 0 after 0 msecs calling inotify_setup+0x0/0x12 initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs calling inotify_user_setup+0x0/0xb8 initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs calling init_sys32_ioctl+0x0/0x85 initcall init_sys32_ioctl+0x0/0x85 returned 0 after 0 msecs calling init_mbcache+0x0/0x14 initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs calling dnotify_init+0x0/0x2a initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs calling vmcore_init+0x0/0x894 initcall vmcore_init+0x0/0x894 returned 0 after 0 msecs calling configfs_init+0x0/0xb3 initcall configfs_init+0x0/0xb3 returned 0 after 0 msecs calling init_devpts_fs+0x0/0x3f initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs calling init_ext3_fs+0x0/0x6a initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs calling journal_init+0x0/0x99 initcall journal_init+0x0/0x99 returned 0 after 0 msecs calling init_ext2_fs+0x0/0x6a initcall init_ext2_fs+0x0/0x6a returned 0 after 0 msecs calling init_ramfs_fs+0x0/0x12 initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs calling init_hugetlbfs_fs+0x0/0x98 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs calling init_fat_fs+0x0/0x4f initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs calling init_msdos_fs+0x0/0x12 initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs calling init_vfat_fs+0x0/0x12 initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs calling init_iso9660_fs+0x0/0x6c initcall init_iso9660_fs+0x0/0x6c returned 0 after 0 msecs calling init_nfs_fs+0x0/0x10e initcall init_nfs_fs+0x0/0x10e returned 0 after 0 msecs calling init_nfsd+0x0/0xbb Installing knfsd (copyright (C) 1996 okir@monad.swb.de). initcall init_nfsd+0x0/0xbb returned 0 after 0 msecs calling init_nlm+0x0/0x22 initcall init_nlm+0x0/0x22 returned 0 after 0 msecs calling init_nls_cp437+0x0/0x12 initcall init_nls_cp437+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp850+0x0/0x12 initcall init_nls_cp850+0x0/0x12 returned 0 after 0 msecs calling init_nls_ascii+0x0/0x12 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_1+0x0/0x12 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_15+0x0/0x12 initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 msecs calling init_nls_utf8+0x0/0x25 initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs calling ipc_init+0x0/0x23 msgmni has been set to 16013 initcall ipc_init+0x0/0x23 returned 0 after 0 msecs calling ipc_sysctl_init+0x0/0x14 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 msecs calling init_mqueue_fs+0x0/0xc6 initcall init_mqueue_fs+0x0/0xc6 returned 0 after 0 msecs calling crypto_algapi_init+0x0/0xd initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs calling blkcipher_module_init+0x0/0x2a initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs calling cryptomgr_init+0x0/0x12 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs calling hmac_module_init+0x0/0x12 initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs calling md5_mod_init+0x0/0x12 initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs calling sha1_generic_mod_init+0x0/0x12 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs calling crypto_cbc_module_init+0x0/0x12 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs calling des_generic_mod_init+0x0/0x3f initcall des_generic_mod_init+0x0/0x3f returned 0 after 0 msecs calling cast5_mod_init+0x0/0x12 initcall cast5_mod_init+0x0/0x12 returned 0 after 0 msecs calling deflate_mod_init+0x0/0x12 initcall deflate_mod_init+0x0/0x12 returned 0 after 0 msecs calling crc32c_mod_init+0x0/0x12 initcall crc32c_mod_init+0x0/0x12 returned 0 after 0 msecs calling crypto_authenc_module_init+0x0/0x12 initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 msecs calling bsg_init+0x0/0x11f Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) initcall bsg_init+0x0/0x11f returned 0 after 0 msecs calling noop_init+0x0/0x14 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 0 msecs calling as_init+0x0/0x14 io scheduler anticipatory registered initcall as_init+0x0/0x14 returned 0 after 0 msecs calling deadline_init+0x0/0x14 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 0 msecs calling cfq_init+0x0/0x9d io scheduler cfq registered (default) initcall cfq_init+0x0/0x9d returned 0 after 0 msecs calling percpu_counter_startup+0x0/0x14 initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs calling pci_init+0x0/0x35 pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:00.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Enabling HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Enabling HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping initcall pci_init+0x0/0x35 returned 0 after 8 msecs calling pci_proc_init+0x0/0x6a initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs calling pcie_portdrv_init+0x0/0x4d PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie01] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie01] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie01] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie01] Allocate Port Service[0000:00:0e.0:pcie03] PCI: Setting latency timer of device 0000:40:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0c.0:pcie00] Allocate Port Service[0000:40:0c.0:pcie01] Allocate Port Service[0000:40:0c.0:pcie03] PCI: Setting latency timer of device 0000:40:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0d.0:pcie00] Allocate Port Service[0000:40:0d.0:pcie01] Allocate Port Service[0000:40:0d.0:pcie03] PCI: Setting latency timer of device 0000:40:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0e.0:pcie00] Allocate Port Service[0000:40:0e.0:pcie01] Allocate Port Service[0000:40:0e.0:pcie03] initcall pcie_portdrv_init+0x0/0x4d returned 0 after 9 msecs calling fb_console_init+0x0/0x129 initcall fb_console_init+0x0/0x129 returned 0 after 0 msecs calling rivafb_init+0x0/0x1a5 initcall rivafb_init+0x0/0x1a5 returned 0 after 0 msecs calling nvidiafb_init+0x0/0x2b6 initcall nvidiafb_init+0x0/0x2b6 returned 0 after 0 msecs calling vt8623fb_init+0x0/0x5f initcall vt8623fb_init+0x0/0x5f returned 0 after 0 msecs calling vesafb_init+0x0/0x235 initcall vesafb_init+0x0/0x235 returned 0 after 0 msecs calling acpi_reserve_resources+0x0/0xeb initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs calling acpi_ac_init+0x0/0x45 initcall acpi_ac_init+0x0/0x45 returned 0 after 0 msecs calling acpi_button_init+0x0/0x5e input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] initcall acpi_button_init+0x0/0x5e returned 0 after 0 msecs calling acpi_fan_init+0x0/0x5e initcall acpi_fan_init+0x0/0x5e returned 0 after 0 msecs calling irqrouter_init_sysfs+0x0/0x38 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs calling acpi_processor_init+0x0/0x113 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 initcall acpi_processor_init+0x0/0x113 returned 0 after 1 msecs calling acpi_container_init+0x0/0x42 initcall acpi_container_init+0x0/0x42 returned 0 after 1 msecs calling acpi_thermal_init+0x0/0x83 initcall acpi_thermal_init+0x0/0x83 returned 0 after 0 msecs calling rand_initialize+0x0/0x2c initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs calling tty_init+0x0/0x1c5 Clocksource tsc unstable (delta = 1553653552 ns) initcall tty_init+0x0/0x1c5 returned 0 after 29 msecs calling pty_init+0x0/0x275 initcall pty_init+0x0/0x275 returned 0 after 0 msecs calling raw_init+0x0/0xd4 initcall raw_init+0x0/0xd4 returned 0 after 0 msecs calling hpet_init+0x0/0x6a hpet_resources: 0xfed00000 is busy initcall hpet_init+0x0/0x6a returned 0 after 0 msecs calling nvram_init+0x0/0x8a Non-volatile memory driver v1.2 initcall nvram_init+0x0/0x8a returned 0 after 0 msecs calling mod_init+0x0/0x1fb initcall mod_init+0x0/0x1fb returned -19 after 0 msecs calling mod_init+0x0/0xba initcall mod_init+0x0/0xba returned -19 after 0 msecs calling agp_init+0x0/0x26 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 0 msecs calling agp_intel_init+0x0/0x29 initcall agp_intel_init+0x0/0x29 returned 0 after 0 msecs calling agp_via_init+0x0/0x29 initcall agp_via_init+0x0/0x29 returned 0 after 0 msecs calling drm_core_init+0x0/0xf9 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0xf9 returned 0 after 0 msecs calling r128_init+0x0/0x1e initcall r128_init+0x0/0x1e returned 0 after 0 msecs calling radeon_init+0x0/0x1e ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKY] -> GSI 18 (level, high) -> IRQ 18 [drm] Initialized radeon 1.28.0 20060524 on minor 0 initcall radeon_init+0x0/0x1e returned 0 after 3 msecs calling via_init+0x0/0x23 initcall via_init+0x0/0x23 returned 0 after 0 msecs calling ipmi_init_msghandler_mod+0x0/0xd ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 0 msecs calling init_ipmi_devintf+0x0/0xfa ipmi device interface initcall init_ipmi_devintf+0x0/0xfa returned 0 after 0 msecs calling init_ipmi_si+0x0/0x78e IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized initcall init_ipmi_si+0x0/0x78e returned 0 after 187 msecs calling ipmi_wdog_init+0x0/0x12e IPMI Watchdog: driver initialized initcall ipmi_wdog_init+0x0/0x12e returned 0 after 6 msecs calling ipmi_poweroff_init+0x0/0x8d Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up initcall ipmi_poweroff_init+0x0/0x8d returned 0 after 44 msecs calling hangcheck_init+0x0/0x8a Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). initcall hangcheck_init+0x0/0x8a returned 0 after 0 msecs calling cn_proc_init+0x0/0x3d initcall cn_proc_init+0x0/0x3d returned 0 after 0 msecs calling serial8250_init+0x0/0x131 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_init+0x0/0x131 returned 0 after 1 msecs calling serial8250_pnp_init+0x0/0x12 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_pnp_init+0x0/0x12 returned 0 after 0 msecs calling serial8250_pci_init+0x0/0x1b initcall serial8250_pci_init+0x0/0x1b returned 0 after 0 msecs calling topology_sysfs_init+0x0/0x49 initcall topology_sysfs_init+0x0/0x49 returned 0 after 0 msecs calling floppy_init+0x0/0xf0f Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found initcall floppy_init+0x0/0xf0f returned -19 after 2874 msecs calling brd_init+0x0/0x167 brd: module loaded initcall brd_init+0x0/0x167 returned 0 after 3 msecs calling bnx2_init+0x0/0x1b Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 initcall bnx2_init+0x0/0x1b returned 0 after 48 msecs calling net_olddevs_init+0x0/0xa0 initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs calling b44_init+0x0/0x63 initcall b44_init+0x0/0x63 returned 0 after 0 msecs calling tun_init+0x0/0xa0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky initcall tun_init+0x0/0xa0 returned 0 after 0 msecs calling init_netconsole+0x0/0x1b5 netconsole: local port 54410 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 54410 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2: eth0: using MSI netconsole: carrier detect appears untrustworthy, waiting 4 seconds bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1b5 returned 0 after 4170 msecs calling scsi_tgt_init+0x0/0x7f initcall scsi_tgt_init+0x0/0x7f returned 0 after 0 msecs calling raid_init+0x0/0x12 initcall raid_init+0x0/0x12 returned 0 after 0 msecs calling spi_transport_init+0x0/0x2e initcall spi_transport_init+0x0/0x2e returned 0 after 0 msecs calling fc_transport_init+0x0/0x4c initcall fc_transport_init+0x0/0x4c returned 0 after 0 msecs calling iscsi_transport_init+0x0/0x118 Loading iSCSI transport class v2.0-869. initcall iscsi_transport_init+0x0/0x118 returned 0 after 0 msecs calling sas_transport_init+0x0/0xbb initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs calling sas_class_init+0x0/0x31 initcall sas_class_init+0x0/0x31 returned 0 after 0 msecs calling init_sd+0x0/0xff Driver 'sd' needs updating - please use bus_type methods initcall init_sd+0x0/0xff returned 0 after 0 msecs calling init_sg+0x0/0x153 initcall init_sg+0x0/0x153 returned 0 after 0 msecs calling mon_init+0x0/0x103 initcall mon_init+0x0/0x103 returned 0 after 0 msecs calling i8042_init+0x0/0x39f PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x39f returned 0 after 2 msecs calling serport_init+0x0/0x34 initcall serport_init+0x0/0x34 returned 0 after 0 msecs calling serio_raw_init+0x0/0x1b initcall serio_raw_init+0x0/0x1b returned 0 after 0 msecs calling mousedev_init+0x0/0x61 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x61 returned 0 after 0 msecs calling evdev_init+0x0/0x12 initcall evdev_init+0x0/0x12 returned 0 after 23 msecs calling atkbd_init+0x0/0x27 initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs calling psmouse_init+0x0/0x6d initcall psmouse_init+0x0/0x6d returned 0 after 58 msecs calling pcspkr_init+0x0/0x12 input: PC Speaker as /class/input/input1 initcall pcspkr_init+0x0/0x12 returned 0 after 32 msecs calling uinput_init+0x0/0x12 initcall uinput_init+0x0/0x12 returned 0 after 0 msecs calling cmos_init+0x0/0x30 initcall cmos_init+0x0/0x30 returned 0 after 0 msecs calling i2c_dev_init+0x0/0x9f i2c /dev entries driver initcall i2c_dev_init+0x0/0x9f returned 0 after 0 msecs calling amd756_init+0x0/0x1b initcall amd756_init+0x0/0x1b returned 0 after 0 msecs calling i2c_amd8111_init+0x0/0x1b initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 msecs calling i2c_i801_init+0x0/0x1b initcall i2c_i801_init+0x0/0x1b returned 0 after 0 msecs calling i2c_i810_init+0x0/0x1b initcall i2c_i810_init+0x0/0x1b returned 0 after 0 msecs calling nforce2_init+0x0/0x1b initcall nforce2_init+0x0/0x1b returned 0 after 0 msecs calling i2c_piix4_init+0x0/0x1b initcall i2c_piix4_init+0x0/0x1b returned 0 after 0 msecs calling i2c_vt586b_init+0x0/0x1b initcall i2c_vt586b_init+0x0/0x1b returned 0 after 0 msecs calling i2c_vt596_init+0x0/0x1b initcall i2c_vt596_init+0x0/0x1b returned 0 after 0 msecs calling coretemp_init+0x0/0x158 initcall coretemp_init+0x0/0x158 returned -19 after 0 msecs calling k8temp_init+0x0/0x1b initcall k8temp_init+0x0/0x1b returned 0 after 0 msecs calling sm_via686a_init+0x0/0x1b initcall sm_via686a_init+0x0/0x1b returned 0 after 0 msecs calling vt1211_init+0x0/0x14e initcall vt1211_init+0x0/0x14e returned -19 after 0 msecs calling sm_vt8231_init+0x0/0x1b initcall sm_vt8231_init+0x0/0x1b returned 0 after 0 msecs calling watchdog_init+0x0/0xb4 SoftDog: cannot register miscdev on minor=130 (err=-16) initcall watchdog_init+0x0/0xb4 returned -16 after 0 msecs initcall watchdog_init+0x0/0xb4 returned with error code -16 calling edac_init+0x0/0x9d EDAC MC: Ver: 2.1.0 Jun 15 2008 initcall edac_init+0x0/0x9d returned 0 after 0 msecs calling i5000_init+0x0/0x41 initcall i5000_init+0x0/0x41 returned 0 after 0 msecs calling e752x_init+0x0/0x42 initcall e752x_init+0x0/0x42 returned 0 after 0 msecs calling i82975x_init+0x0/0xa0 initcall i82975x_init+0x0/0xa0 returned -19 after 0 msecs calling cpufreq_stats_init+0x0/0x8f initcall cpufreq_stats_init+0x0/0x8f returned 0 after 0 msecs calling cpufreq_gov_powersave_init+0x0/0x12 initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_dbs_init+0x0/0x46 initcall cpufreq_gov_dbs_init+0x0/0x46 returned 0 after 0 msecs calling cpufreq_gov_dbs_init+0x0/0x12 initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs calling init_ladder+0x0/0x12 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 0 msecs calling hid_init+0x0/0x8 initcall hid_init+0x0/0x8 returned 0 after 0 msecs calling hid_init+0x0/0x61 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0x61 returned 0 after 0 msecs calling sysctl_core_init+0x0/0x12 initcall sysctl_core_init+0x0/0x12 returned 0 after 0 msecs calling flow_cache_init+0x0/0x1a7 initcall flow_cache_init+0x0/0x1a7 returned 0 after 0 msecs calling sysctl_ipv4_init+0x0/0x4e initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs calling ipip_init+0x0/0x71 IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x71 returned 0 after 0 msecs calling ipgre_init+0x0/0x71 GRE over IPv4 tunneling driver initcall ipgre_init+0x0/0x71 returned 0 after 0 msecs calling init_syncookies+0x0/0x19 initcall init_syncookies+0x0/0x19 returned 0 after 0 msecs calling ah4_init+0x0/0x68 initcall ah4_init+0x0/0x68 returned 0 after 0 msecs calling esp4_init+0x0/0x68 initcall esp4_init+0x0/0x68 returned 0 after 0 msecs calling ipcomp4_init+0x0/0x68 initcall ipcomp4_init+0x0/0x68 returned 0 after 0 msecs calling ipip_init+0x0/0x68 initcall ipip_init+0x0/0x68 returned 0 after 0 msecs calling xfrm4_beet_init+0x0/0x17 initcall xfrm4_beet_init+0x0/0x17 returned 0 after 0 msecs calling tunnel4_init+0x0/0x32 initcall tunnel4_init+0x0/0x32 returned 0 after 0 msecs calling xfrm4_transport_init+0x0/0x17 initcall xfrm4_transport_init+0x0/0x17 returned 0 after 0 msecs calling xfrm4_mode_tunnel_init+0x0/0x17 initcall xfrm4_mode_tunnel_init+0x0/0x17 returned 0 after 0 msecs calling inet_diag_init+0x0/0x69 initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs calling tcp_diag_init+0x0/0x12 initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs calling bictcp_register+0x0/0x12 TCP bic registered initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs calling xfrm_user_init+0x0/0x58 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x58 returned 0 after 0 msecs calling packet_init+0x0/0x47 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 0 msecs calling ipsec_pfkey_init+0x0/0x8c NET: Registered protocol family 15 initcall ipsec_pfkey_init+0x0/0x8c returned 0 after 0 msecs calling init_sunrpc+0x0/0x5d RPC: Registered udp transport module. RPC: Registered tcp transport module. initcall init_sunrpc+0x0/0x5d returned 0 after 0 msecs calling init_rpcsec_gss+0x0/0x38 initcall init_rpcsec_gss+0x0/0x38 returned 0 after 0 msecs calling init_kerberos_module+0x0/0x2f initcall init_kerberos_module+0x0/0x2f returned 0 after 0 msecs calling init_spkm3_module+0x0/0x2f initcall init_spkm3_module+0x0/0x2f returned 0 after 0 msecs calling powernowk8_init+0x0/0x8f powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 initcall powernowk8_init+0x0/0x8f returned 0 after 3 msecs calling acpi_cpufreq_init+0x0/0x8f initcall acpi_cpufreq_init+0x0/0x8f returned -16 after 0 msecs initcall acpi_cpufreq_init+0x0/0x8f returned with error code -16 calling centrino_init+0x0/0x33 initcall centrino_init+0x0/0x33 returned -19 after 0 msecs calling cpufreq_p4_init+0x0/0x60 initcall cpufreq_p4_init+0x0/0x60 returned -19 after 0 msecs calling hpet_insert_resource+0x0/0x23 initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs calling lapic_insert_resource+0x0/0x40 initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs calling init_lapic_nmi_sysfs+0x0/0x38 initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs calling ioapic_insert_resources+0x0/0x4f initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs calling init_oops_id+0x0/0x23 initcall init_oops_id+0x0/0x23 returned 0 after 0 msecs calling disable_boot_consoles+0x0/0x3a initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs calling pm_qos_power_init+0x0/0x61 initcall pm_qos_power_init+0x0/0x61 returned 0 after 0 msecs calling software_resume+0x0/0x13f initcall software_resume+0x0/0x13f returned -2 after 0 msecs initcall software_resume+0x0/0x13f returned with error code -2 calling debugfs_kprobe_init+0x0/0x89 initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs calling taskstats_init+0x0/0x95 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 0 msecs calling random32_reseed+0x0/0x69 initcall random32_reseed+0x0/0x69 returned 0 after 0 msecs calling pci_sysfs_init+0x0/0x4c initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs calling acpi_wakeup_device_init+0x0/0xa5 initcall acpi_wakeup_device_init+0x0/0xa5 returned 0 after 0 msecs calling acpi_sleep_proc_init+0x0/0x55 initcall acpi_sleep_proc_init+0x0/0x55 returned 0 after 0 msecs calling seqgen_init+0x0/0xf initcall seqgen_init+0x0/0xf returned 0 after 0 msecs calling scsi_complete_async_scans+0x0/0xe5 initcall scsi_complete_async_scans+0x0/0xe5 returned 0 after 0 msecs calling rtc_hctosys+0x0/0x17b drivers/rtc/hctosys.c: unable to open rtc device (rtc0) initcall rtc_hctosys+0x0/0x17b returned -19 after 0 msecs calling edd_init+0x0/0x2f1 BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. initcall edd_init+0x0/0x2f1 returned -19 after 0 msecs calling pci_mmcfg_late_insert_resources+0x0/0x43 initcall pci_mmcfg_late_insert_resources+0x0/0x43 returned 0 after 0 msecs calling tcp_congestion_default+0x0/0x12 initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs Freeing unused kernel memory: 344k freed Write protecting the kernel read-only data: 4556k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected insmod used greatest stack depth: 5360 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected insmod used greatest stack depth: 5336 bytes left ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 usb 1-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 ACPI: PCI Interrupt 0000:42:08.0[A] -> Link [LNKA] -> GSI 54 (level, high) -> IRQ 54 usb 1-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 503 using DAC cciss cciss0: SendCmd Invalid command list address returned! (c) input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 p3 p4 < p5 p6 > blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d1: unknown partition table insmod used greatest stack depth: 4080 bytes left EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. modprobe used greatest stack depth: 3584 bytes left tg3.c:v3.92.1 (June 9, 2008) ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 ACPI: PCI Interrupt 0000:07:04.0[A] -> Link [LNKZ] -> GSI 19 (level, high) -> IRQ 19 eth2: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:2f eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt 0000:07:04.1[B] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 eth3: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:30 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[76148000] dma_mask[40-bit]