Add support for exporting the GPIOs on the SM501 via gpiolib. Signed-off-by: Ben Dooks Index: linux-2.6.26-rc5-quilt1/include/linux/sm501.h =================================================================== --- linux-2.6.26-rc5-quilt1.orig/include/linux/sm501.h 2008-06-11 11:29:03.000000000 +0100 +++ linux-2.6.26-rc5-quilt1/include/linux/sm501.h 2008-06-11 11:29:03.000000000 +0100 @@ -46,24 +46,6 @@ extern unsigned long sm501_modify_reg(st unsigned long set, unsigned long clear); -/* sm501_gpio_set - * - * set the state of the given GPIO line -*/ - -extern void sm501_gpio_set(struct device *dev, - unsigned long gpio, - unsigned int to, - unsigned int dir); - -/* sm501_gpio_get - * - * get the state of the given GPIO line -*/ - -extern unsigned long sm501_gpio_get(struct device *dev, - unsigned long gpio); - /* Platform data definitions */ @@ -131,6 +113,7 @@ struct sm501_reg_init { #define SM501_USE_FBACCEL (1<<6) #define SM501_USE_AC97 (1<<7) #define SM501_USE_I2S (1<<8) +#define SM501_USE_GPIO (1<<9) #define SM501_USE_ALL (0xffffffff) @@ -173,6 +156,7 @@ struct sm501_platdata { struct sm501_platdata_fb *fb; int flags; + unsigned gpio_base; int (*get_power)(struct device *dev); int (*set_power)(struct device *dev, unsigned int on); Index: linux-2.6.26-rc5-quilt1/drivers/mfd/sm501.c =================================================================== --- linux-2.6.26-rc5-quilt1.orig/drivers/mfd/sm501.c 2008-06-11 11:29:03.000000000 +0100 +++ linux-2.6.26-rc5-quilt1/drivers/mfd/sm501.c 2008-06-11 11:31:57.000000000 +0100 @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -31,10 +32,29 @@ struct sm501_device { struct platform_device pdev; }; +struct sm501_gpio; + +struct sm501_gpio_chip { + struct gpio_chip gpio; + struct sm501_gpio *ourgpio; /* to get back to parent. */ + void __iomem *regbase; +}; + +struct sm501_gpio { + struct sm501_gpio_chip low; + struct sm501_gpio_chip high; + spinlock_t lock; + + unsigned int registered : 1; + void __iomem *regs; + struct resource *regs_res; +}; + struct sm501_devdata { spinlock_t reg_lock; struct mutex clock_lock; struct list_head devices; + struct sm501_gpio gpio; struct device *dev; struct resource *io_res; @@ -42,6 +62,7 @@ struct sm501_devdata { struct resource *regs_claim; struct sm501_platdata *platdata; + unsigned int in_suspend; unsigned long pm_misc; @@ -52,6 +73,7 @@ struct sm501_devdata { unsigned int rev; }; + #define MHZ (1000 * 1000) #ifdef DEBUG @@ -276,58 +298,6 @@ unsigned long sm501_modify_reg(struct de EXPORT_SYMBOL_GPL(sm501_modify_reg); -unsigned long sm501_gpio_get(struct device *dev, - unsigned long gpio) -{ - struct sm501_devdata *sm = dev_get_drvdata(dev); - unsigned long result; - unsigned long reg; - - reg = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW; - result = readl(sm->regs + reg); - - result >>= (gpio & 31); - return result & 1UL; -} - -EXPORT_SYMBOL_GPL(sm501_gpio_get); - -void sm501_gpio_set(struct device *dev, - unsigned long gpio, - unsigned int to, - unsigned int dir) -{ - struct sm501_devdata *sm = dev_get_drvdata(dev); - - unsigned long bit = 1 << (gpio & 31); - unsigned long base; - unsigned long save; - unsigned long val; - - base = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW; - base += SM501_GPIO; - - spin_lock_irqsave(&sm->reg_lock, save); - - val = readl(sm->regs + base) & ~bit; - if (to) - val |= bit; - writel(val, sm->regs + base); - - val = readl(sm->regs + SM501_GPIO_DDR_LOW) & ~bit; - if (dir) - val |= bit; - - writel(val, sm->regs + SM501_GPIO_DDR_LOW); - sm501_sync_regs(sm); - - spin_unlock_irqrestore(&sm->reg_lock, save); - -} - -EXPORT_SYMBOL_GPL(sm501_gpio_set); - - /* sm501_unit_power * * alters the power active gate to set specific units on or off @@ -906,6 +876,226 @@ static int sm501_register_display(struct return sm501_register_device(sm, pdev); } +#ifdef CONFIG_MFD_SM501_GPIO + +static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc) +{ + return container_of(gc, struct sm501_gpio_chip, gpio); +} + +static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio) +{ + return container_of(gpio, struct sm501_devdata, gpio); +} + +static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset) + +{ + struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip); + unsigned long result; + + result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW); + result >>= offset; + + return result & 1UL; +} + +static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value) + +{ + struct sm501_gpio_chip *smchip = to_sm501_gpio(chip); + struct sm501_gpio *smgpio = smchip->ourgpio; + unsigned long bit = 1 << offset; + void __iomem *regs = smchip->regbase; + unsigned long save; + unsigned long val; + + dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n", + __func__, chip, offset); + + spin_lock_irqsave(&smgpio->lock, save); + + val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit; + if (value) + val |= bit; + writel(val, regs); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + spin_unlock_irqrestore(&smgpio->lock, save); +} + +static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct sm501_gpio_chip *smchip = to_sm501_gpio(chip); + struct sm501_gpio *smgpio = smchip->ourgpio; + void __iomem *regs = smchip->regbase; + unsigned long bit = 1 << offset; + unsigned long save; + unsigned long ddr; + + dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n", + __func__, chip, offset); + + spin_lock_irqsave(&smgpio->lock, save); + + ddr = readl(regs + SM501_GPIO_DDR_LOW); + writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + spin_unlock_irqrestore(&smgpio->lock, save); + + return 0; +} + +static int sm501_gpio_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct sm501_gpio_chip *smchip = to_sm501_gpio(chip); + struct sm501_gpio *smgpio = smchip->ourgpio; + unsigned long bit = 1 << offset; + void __iomem *regs = smchip->regbase; + unsigned long save; + unsigned long val; + unsigned long ddr; + + dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n", + __func__, chip, offset, value); + + spin_lock_irqsave(&smgpio->lock, save); + + val = readl(regs + SM501_GPIO_DATA_LOW); + if (value) + val |= bit; + else + val &= ~bit; + writel(val, regs); + + ddr = readl(regs + SM501_GPIO_DDR_LOW); + writel(ddr | bit, regs + SM501_GPIO_DDR_LOW); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + writel(val, regs + SM501_GPIO_DATA_LOW); + + sm501_sync_regs(sm501_gpio_to_dev(smgpio)); + spin_unlock_irqrestore(&smgpio->lock, save); + + return 0; +} + +static struct gpio_chip gpio_chip_template = { + .ngpio = 32, + .direction_input = sm501_gpio_input, + .direction_output = sm501_gpio_output, + .set = sm501_gpio_set, + .get = sm501_gpio_get, +}; + +static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm, + struct sm501_gpio *gpio, + struct sm501_gpio_chip *chip) +{ + struct sm501_platdata *pdata = sm->platdata; + struct gpio_chip *gchip = &chip->gpio; + unsigned base = pdata->gpio_base; + + memcpy(chip, &gpio_chip_template, sizeof(struct gpio_chip)); + + if (chip == &gpio->high) { + base += 32; + chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH; + gchip->label = "SM501-HIGH"; + } else { + chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW; + gchip->label = "SM501-LOW"; + } + + gchip->base = base; + chip->ourgpio = gpio; + + return gpiochip_add(gchip); +} + +static int sm501_register_gpio(struct sm501_devdata *sm) +{ + struct sm501_gpio *gpio = &sm->gpio; + resource_size_t iobase = sm->io_res->start + SM501_GPIO; + int ret; + int tmp; + + dev_dbg(sm->dev, "registering gpio block %08llx\n", + (unsigned long long)iobase); + + spin_lock_init(&gpio->lock); + + gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio"); + if (gpio->regs_res == NULL) { + dev_err(sm->dev, "gpio: failed to request region\n"); + return -ENXIO; + } + + gpio->regs = ioremap(iobase, 0x20); + if (gpio->regs == NULL) { + dev_err(sm->dev, "gpio: failed to remap registers\n"); + ret = -ENXIO; + goto err_mapped; + } + + /* Register both our chips. */ + + ret = sm501_gpio_register_chip(sm, gpio, &gpio->low); + if (ret) { + dev_err(sm->dev, "failed to add low chip\n"); + goto err_mapped; + } + + ret = sm501_gpio_register_chip(sm, gpio, &gpio->high); + if (ret) { + dev_err(sm->dev, "failed to add high chip\n"); + goto err_low_chip; + } + + gpio->registered = 1; + + return 0; + + err_low_chip: + tmp = gpiochip_remove(&gpio->low.gpio); + if (tmp) { + dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n"); + return ret; + } + + err_mapped: + release_resource(gpio->regs_res); + kfree(gpio->regs_res); + + return ret; +} + +static void sm501_gpio_remove(struct sm501_devdata *sm) +{ + int ret; + + ret = gpiochip_remove(&sm->gpio.low.gpio); + if (ret) + dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n"); + + ret = gpiochip_remove(&sm->gpio.high.gpio); + if (ret) + dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n"); +} + +#else +static int sm501_register_gpio(struct sm501_devdata *sm) +{ + return 0; +} + +static void sm501_gpio_remove(struct sm501_devdata *sm) +{ +} +#endif + /* sm501_dbg_regs * * Debug attribute to attach to parent device to show core registers @@ -1059,6 +1249,8 @@ static int sm501_init_dev(struct sm501_d sm501_register_usbhost(sm, &mem_avail); if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1)) sm501_register_uart(sm, idata->devices); + if (idata->devices & SM501_USE_GPIO) + sm501_register_gpio(sm); } ret = sm501_check_clocks(sm); @@ -1366,6 +1558,9 @@ static void sm501_dev_remove(struct sm50 sm501_remove_sub(sm, smdev); device_remove_file(sm->dev, &dev_attr_dbg_regs); + + if (sm->gpio.registered) + sm501_gpio_remove(sm); } static void sm501_pci_remove(struct pci_dev *dev) Index: linux-2.6.26-rc5-quilt1/drivers/mfd/Kconfig =================================================================== --- linux-2.6.26-rc5-quilt1.orig/drivers/mfd/Kconfig 2008-06-11 11:29:37.000000000 +0100 +++ linux-2.6.26-rc5-quilt1/drivers/mfd/Kconfig 2008-06-11 11:31:57.000000000 +0100 @@ -15,6 +15,14 @@ config MFD_SM501 interface. The device may be connected by PCI or local bus with varying functions enabled. +config MFD_SM501_GPIO + bool "Export GPIO via GPIO layer" + depends on MFD_SM501 && HAVE_GPIO_LIB + ---help--- + This option uses the gpio library layer to export the 64 GPIO + lines on the SM501. The platform data is used to supply the + base number for the first GPIO line to register. + config MFD_ASIC3 bool "Support for Compaq ASIC3" depends on GENERIC_HARDIRQS && ARM -- Ben (ben@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes' -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/