[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080625192452.GA12754@linux.vnet.ibm.com>
Date: Wed, 25 Jun 2008 12:24:52 -0700
From: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org
Cc: mingo@...e.hu, josh@...edesktop.org, dvhltc@...ibm.com,
niv@...ibm.com, dino@...ibm.com, akpm@...ux-foundation.org,
torvalds@...ux-foundation.org, vegard.nossum@...il.com,
adobriyan@...il.com, oleg@...sign.ru, bunk@...nel.org, rjw@...k.pl
Subject: [PATCH -tip-rcu] Make rcutorture more vicious: invoke RCU readers from irq handlers (timers)
This patch allows torturing RCU from irq handlers (timers, in this case).
A new module parameter irqreader enables such additional torturing,
and is enabled by default. Variants of RCU that do not tolerate readers
being called from irq handlers (e.g., SRCU) ignore irqreader.
(No failures observed, but only short tests thus far. And no failures
observed thus far from about 10 hours of running stock rcutorture in
parallel with 170 kernel builds on a two-CPU machine.)
Signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
---
Documentation/RCU/torture.txt | 23 +++++++------
kernel/rcutorture.c | 74 +++++++++++++++++++++++++++++++++++++++---
2 files changed, 84 insertions(+), 13 deletions(-)
diff -urpNa -X dontdiff linux-2.6.26-rc4-rcut4-procqp/Documentation/RCU/torture.txt linux-2.6.26-rc4-rcut5-timer/Documentation/RCU/torture.txt
--- linux-2.6.26-rc4-rcut4-procqp/Documentation/RCU/torture.txt 2008-06-22 10:29:04.000000000 -0700
+++ linux-2.6.26-rc4-rcut5-timer/Documentation/RCU/torture.txt 2008-06-25 11:44:51.000000000 -0700
@@ -30,10 +30,10 @@ MODULE PARAMETERS
This module has the following parameters:
-nreaders This is the number of RCU reading threads supported.
- The default is twice the number of CPUs. Why twice?
- To properly exercise RCU implementations with preemptible
- read-side critical sections.
+irqreaders Says to invoke RCU readers from irq level. This is currently
+ done via timers. Defaults to "1" for variants of RCU that
+ permit this. (Or, more accurately, variants of RCU that do
+ -not- permit this know to ignore this variable.)
nfakewriters This is the number of RCU fake writer threads to run. Fake
writer threads repeatedly use the synchronous "wait for
@@ -44,6 +44,16 @@ nfakewriters This is the number of RCU f
to trigger special cases caused by multiple writers, such as
the synchronize_srcu() early return optimization.
+nreaders This is the number of RCU reading threads supported.
+ The default is twice the number of CPUs. Why twice?
+ To properly exercise RCU implementations with preemptible
+ read-side critical sections.
+
+shuffle_interval
+ The number of seconds to keep the test threads affinitied
+ to a particular subset of the CPUs, defaults to 3 seconds.
+ Used in conjunction with test_no_idle_hz.
+
stat_interval The number of seconds between output of torture
statistics (via printk()). Regardless of the interval,
statistics are printed when the module is unloaded.
@@ -51,11 +61,6 @@ stat_interval The number of seconds betw
be printed -only- when the module is unloaded, and this
is the default.
-shuffle_interval
- The number of seconds to keep the test threads affinitied
- to a particular subset of the CPUs, defaults to 3 seconds.
- Used in conjunction with test_no_idle_hz.
-
stutter The length of time to run the test before pausing for this
same period of time. Defaults to "stutter=5", so as
to run and pause for (roughly) five-second intervals.
diff -urpNa -X dontdiff linux-2.6.26-rc4-rcut4-procqp/kernel/rcutorture.c linux-2.6.26-rc4-rcut5-timer/kernel/rcutorture.c
--- linux-2.6.26-rc4-rcut4-procqp/kernel/rcutorture.c 2008-06-25 11:39:58.000000000 -0700
+++ linux-2.6.26-rc4-rcut5-timer/kernel/rcutorture.c 2008-06-25 11:47:14.000000000 -0700
@@ -59,6 +59,7 @@ static int verbose; /* Print more debug
static int test_no_idle_hz; /* Test RCU's support for tickless idle CPUs. */
static int shuffle_interval = 3; /* Interval between shuffles (in sec)*/
static int stutter = 5; /* Start/stop testing interval (in sec) */
+static int irqreader = 1; /* RCU readers from irq (timers). */
static char *torture_type = "rcu"; /* What RCU implementation to torture. */
module_param(nreaders, int, 0444);
@@ -75,6 +76,8 @@ module_param(shuffle_interval, int, 0444
MODULE_PARM_DESC(shuffle_interval, "Number of seconds between shuffles");
module_param(stutter, int, 0444);
MODULE_PARM_DESC(stutter, "Number of seconds to run/halt test");
+module_param(irqreader, int, 0444);
+MODULE_PARM_DESC(irqreader, "Allow RCU readers from irq handlers");
module_param(torture_type, charp, 0444);
MODULE_PARM_DESC(torture_type, "Type of RCU to torture (rcu, rcu_bh, srcu)");
@@ -121,6 +124,7 @@ static atomic_t n_rcu_torture_alloc_fail
static atomic_t n_rcu_torture_free;
static atomic_t n_rcu_torture_mberror;
static atomic_t n_rcu_torture_error;
+static long n_rcu_torture_timers = 0;
static struct list_head rcu_torture_removed;
static int stutter_pause_test = 0;
@@ -216,6 +220,7 @@ struct rcu_torture_ops {
void (*deferredfree)(struct rcu_torture *p);
void (*sync)(void);
int (*stats)(char *page);
+ int irqcapable;
char *name;
};
static struct rcu_torture_ops *cur_ops = NULL;
@@ -289,6 +294,7 @@ static struct rcu_torture_ops rcu_ops =
.deferredfree = rcu_torture_deferred_free,
.sync = synchronize_rcu,
.stats = NULL,
+ .irqcapable = 1,
.name = "rcu"
};
@@ -328,6 +334,7 @@ static struct rcu_torture_ops rcu_sync_o
.deferredfree = rcu_sync_torture_deferred_free,
.sync = synchronize_rcu,
.stats = NULL,
+ .irqcapable = 1,
.name = "rcu_sync"
};
@@ -388,6 +395,7 @@ static struct rcu_torture_ops rcu_bh_ops
.deferredfree = rcu_bh_torture_deferred_free,
.sync = rcu_bh_torture_synchronize,
.stats = NULL,
+ .irqcapable = 1,
.name = "rcu_bh"
};
@@ -401,6 +409,7 @@ static struct rcu_torture_ops rcu_bh_syn
.deferredfree = rcu_sync_torture_deferred_free,
.sync = rcu_bh_torture_synchronize,
.stats = NULL,
+ .irqcapable = 1,
.name = "rcu_bh_sync"
};
@@ -520,6 +529,7 @@ static struct rcu_torture_ops sched_ops
.deferredfree = rcu_sync_torture_deferred_free,
.sync = sched_torture_synchronize,
.stats = NULL,
+ .irqcapable = 1,
.name = "sched"
};
@@ -594,6 +604,52 @@ rcu_torture_fakewriter(void *arg)
}
/*
+ * RCU torture reader from timer handler. Dereferences rcu_torture_current,
+ * incrementing the corresponding element of the pipeline array. The
+ * counter in the element should never be greater than 1, otherwise, the
+ * RCU implementation is broken.
+ */
+static void rcu_torture_timer(unsigned long unused)
+{
+ int idx;
+ int completed;
+ static DEFINE_RCU_RANDOM(rand);
+ static DEFINE_SPINLOCK(rand_lock);
+ struct rcu_torture *p;
+ int pipe_count;
+
+ idx = cur_ops->readlock();
+ completed = cur_ops->completed();
+ p = rcu_dereference(rcu_torture_current);
+ if (p == NULL) {
+ /* Leave because rcu_torture_writer is not yet underway */
+ cur_ops->readunlock(idx);
+ return;
+ }
+ if (p->rtort_mbtest == 0)
+ atomic_inc(&n_rcu_torture_mberror);
+ spin_lock(&rand_lock);
+ cur_ops->readdelay(&rand);
+ n_rcu_torture_timers++;
+ spin_unlock(&rand_lock);
+ preempt_disable();
+ pipe_count = p->rtort_pipe_count;
+ if (pipe_count > RCU_TORTURE_PIPE_LEN) {
+ /* Should not happen, but... */
+ pipe_count = RCU_TORTURE_PIPE_LEN;
+ }
+ ++__get_cpu_var(rcu_torture_count)[pipe_count];
+ completed = cur_ops->completed() - completed;
+ if (completed > RCU_TORTURE_PIPE_LEN) {
+ /* Should not happen, but... */
+ completed = RCU_TORTURE_PIPE_LEN;
+ }
+ ++__get_cpu_var(rcu_torture_batch)[completed];
+ preempt_enable();
+ cur_ops->readunlock(idx);
+}
+
+/*
* RCU torture reader kthread. Repeatedly dereferences rcu_torture_current,
* incrementing the corresponding element of the pipeline array. The
* counter in the element should never be greater than 1, otherwise, the
@@ -607,11 +663,18 @@ rcu_torture_reader(void *arg)
DEFINE_RCU_RANDOM(rand);
struct rcu_torture *p;
int pipe_count;
+ struct timer_list t;
VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
set_user_nice(current, 19);
+ if (irqreader && cur_ops->irqcapable)
+ setup_timer_on_stack(&t, rcu_torture_timer, 0);
do {
+ if (irqreader && cur_ops->irqcapable) {
+ if (!timer_pending(&t))
+ mod_timer(&t, 1);
+ }
idx = cur_ops->readlock();
completed = cur_ops->completed();
p = rcu_dereference(rcu_torture_current);
@@ -643,6 +706,8 @@ rcu_torture_reader(void *arg)
rcu_stutter_wait();
} while (!kthread_should_stop() && !fullstop);
VERBOSE_PRINTK_STRING("rcu_torture_reader task stopping");
+ if (irqreader && cur_ops->irqcapable)
+ del_timer_sync(&t);
while (!kthread_should_stop())
schedule_timeout_uninterruptible(1);
return 0;
@@ -673,14 +738,15 @@ rcu_torture_printk(char *page)
cnt += sprintf(&page[cnt], "%s%s ", torture_type, TORTURE_FLAG);
cnt += sprintf(&page[cnt],
"rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
- "rtmbe: %d",
+ "rtmbe: %d nt: %ld",
rcu_torture_current,
rcu_torture_current_version,
list_empty(&rcu_torture_freelist),
atomic_read(&n_rcu_torture_alloc),
atomic_read(&n_rcu_torture_alloc_fail),
atomic_read(&n_rcu_torture_free),
- atomic_read(&n_rcu_torture_mberror));
+ atomic_read(&n_rcu_torture_mberror),
+ n_rcu_torture_timers);
if (atomic_read(&n_rcu_torture_mberror) != 0)
cnt += sprintf(&page[cnt], " !!!");
cnt += sprintf(&page[cnt], "\n%s%s ", torture_type, TORTURE_FLAG);
@@ -835,10 +901,10 @@ rcu_torture_print_module_parms(char *tag
printk(KERN_ALERT "%s" TORTURE_FLAG
"--- %s: nreaders=%d nfakewriters=%d "
"stat_interval=%d verbose=%d test_no_idle_hz=%d "
- "shuffle_interval=%d stutter=%d\n",
+ "shuffle_interval=%d stutter=%d irqreader=%d\n",
torture_type, tag, nrealreaders, nfakewriters,
stat_interval, verbose, test_no_idle_hz, shuffle_interval,
- stutter);
+ stutter, irqreader);
}
static void
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists