| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 26 Jun 2008 13:37:23 +0800
From: Jie Yang <Jie.Yang@...eros.com>
To: "jeff@...zik.org" <jeff@...zik.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH 2.6.25.3 1/5] atl1e: Atheros L1E Gigabit Ethernet driver
From: Jie Yang <jie.yang@...eros.com>
Full patch for the Atheros L1E Gigabit Ethernet driver.
Supportring AR8121, AR8113 and AR8114
Signed-off-by: Jie Yang <jie.yang @atheros.com>
---
diff -uprN -X linux-2.6.25.3.orig/Documentation/dontdiff linux-2.6.25.3.orig/drivers/net/atl1e/Makefile linux-2.6.25.3.atheros/drivers/net/atl1e/Makefile
--- linux-2.6.25.3.orig/drivers/net/atl1e/Makefile 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.25.3.atheros/drivers/net/atl1e/Makefile 2008-06-20 11:22:34.000000000 +0800
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ATL1E) += atl1e.o
+atl1e-y += atl1e_main.o atl1e_hw.o atl1e_ethtool.o atl1e_param.o
diff -uprN -X linux-2.6.25.3.orig/Documentation/dontdiff linux-2.6.25.3.orig/drivers/net/Kconfig linux-2.6.25.3.atheros/drivers/net/Kconfig
--- linux-2.6.25.3.orig/drivers/net/Kconfig 2008-05-10 12:48:50.000000000 +0800
+++ linux-2.6.25.3.atheros/drivers/net/Kconfig 2008-06-19 18:17:42.000000000 +0800
@@ -2445,6 +2445,32 @@ config ATL1
To compile this driver as a module, choose M here. The module
will be called atl1.
+config ATL1E
+ tristate "Atheros L1e Gigabit Ethernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ help
+ This driver supports the Atheros L1E gigabit ethernet adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl1e.
+
+config ATL1E_NAPI
+ bool "Use Rx Polling (NAPI)"
+ depends on ATL1E
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ If in doubt, say N.
+
+
endif # NETDEV_1000
#
diff -uprN -X linux-2.6.25.3.orig/Documentation/dontdiff linux-2.6.25.3.orig/drivers/net/Makefile linux-2.6.25.3.atheros/drivers/net/Makefile
--- linux-2.6.25.3.orig/drivers/net/Makefile 2008-05-10 12:48:50.000000000 +0800
+++ linux-2.6.25.3.atheros/drivers/net/Makefile 2008-06-20 09:48:38.000000000 +0800
@@ -16,6 +16,7 @@ obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_ATL1) += atl1/
+obj-$(CONFIG_ATL1E) += atl1e/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_TEHUTI) += tehuti.o
diff -uprN -X linux-2.6.25.3.orig/Documentation/dontdiff linux-2.6.25.3.orig/include/linux/pci_ids.h linux-2.6.25.3.atheros/include/linux/pci_ids.h
--- linux-2.6.25.3.orig/include/linux/pci_ids.h 2008-05-10 12:48:50.000000000 +0800
+++ linux-2.6.25.3.atheros/include/linux/pci_ids.h 2008-06-20 09:43:40.000000000 +0800
@@ -2175,6 +2175,7 @@
#define PCI_VENDOR_ID_ATTANSIC 0x1969
#define PCI_DEVICE_ID_ATTANSIC_L1 0x1048
+#define PCI_DEVICE_ID_ATTANSIC_L1E 0x1026
#define PCI_VENDOR_ID_JMICRON 0x197B
#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists