Message-ID: <48652da5.s2xXeJUyQ6DrqarN%dougthompson@xmission.com>
Date:	Fri, 27 Jun 2008 12:12:53 -0600
From:	dougthompson@...ssion.com
To:	bluesmoke-devel@...ts.sourceforge.net,
	linux-kernel@...r.kernel.org, akpm@...ux-foundation.org
Subject: [PATCH 1/13] EDAC i5100 new intel chipset driver

From:	Arthur Jones <ajones@...erbed.com>

Applied to linux-2.6.26-rc5-mm3

Preliminary support for the Intel 5100 MCH.  CE and UE
errors are reported along with the current DIMM label
information and other memory parameters.

Reasons why this is preliminary:

1)  This chip has 2 independent memory controllers which,
for best perforance, use interleaved accesses to the DDR2
memory.  This architecture does not map very well to the
current edac data structures which depend on symmetric
channel access to the interleaved data.  Without core changes,
the best I could do for now is to map both memory controllers
to different csrows (first all ranks of controller 0,
then all ranks of controller 1).  Someone much more
familiar with the edac core than I will probably need to
come up with a more general data structure to handle the
interleaving and de-interleaving of the two memory controllers.

2)  I have not yet tackled the de-interleaving of the
rank/controller address space into the physical address
space of the CPU.  There is nothing fundamentally missing,
it is just ending up to be a lot of code, and I'd rather
keep it separate for now, esp since it doesn't work yet...

3)  The code depends on a particular i5100 chip select
to DIMM mainboard chip select mapping.  This mapping
seems obvious to me in order to support dual and single
ranked memory, but it is not unique and DIMM labels
could be wrong on other mainboards.  There is no way
to query this mapping that I know of.

4)  The code requires that the i5100 is in 32GB mode.
Only 4 ranks per controller, 2 ranks per DIMM are
supported.  I do not have hardware (nor do I expect
to have hardware anytime soon) for the 48GB (6 ranks
per controller) mode.

5)  The serial presence detect code should be broken
out into a "real" i2c driver so that decode-dimms.pl
can work.

Signed-off-by:	Arthur Jones <ajones@...erbed.com>
Signed-off-by:	Doug Thompson <dougthompson@...ssion.com>
---
 drivers/edac/Kconfig      |    7 +
 drivers/edac/Makefile     |    1 +
 drivers/edac/i5100_edac.c |  827 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci_ids.h   |    3 +
 4 files changed, 838 insertions(+), 0 deletions(-)
 create mode 100644 drivers/edac/i5100_edac.c

Index: linux-2.6.26-rc5-mm3.full/drivers/edac/Kconfig
===================================================================
--- linux-2.6.26-rc5-mm3.full.orig/drivers/edac/Kconfig
+++ linux-2.6.26-rc5-mm3.full/drivers/edac/Kconfig
@@ -123,6 +123,13 @@ config EDAC_I5000
 	  Support for error detection and correction the Intel
 	  Greekcreek/Blackford chipsets.
 
+config EDAC_I5100
+	tristate "Intel San Clemente MCH"
+	depends on EDAC_MM_EDAC && X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  San Clemente MCH.
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
Index: linux-2.6.26-rc5-mm3.full/drivers/edac/Makefile
===================================================================
--- linux-2.6.26-rc5-mm3.full.orig/drivers/edac/Makefile
+++ linux-2.6.26-rc5-mm3.full/drivers/edac/Makefile
@@ -19,6 +19,7 @@ endif
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
+obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
Index: linux-2.6.26-rc5-mm3.full/drivers/edac/i5100_edac.c
===================================================================
--- /dev/null
+++ linux-2.6.26-rc5-mm3.full/drivers/edac/i5100_edac.c
@@ -0,0 +1,827 @@
+/*
+ * Intel 5100 Memory Controllers kernel module
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This module is based on the following document:
+ *
+ * Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
+ *      http://download.intel.com/design/chipsets/datashts/318378.pdf
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/delay.h>
+#include <linux/mmzone.h>
+
+#include "edac_core.h"
+
+/* register addresses and bit field accessors... */
+
+/* device 16, func 1 */
+#define I5100_MS		0x44	/* Memory Status Register */
+#define I5100_SPDDATA		0x48	/* Serial Presence Detect Status Reg */
+#define		I5100_SPDDATA_RDO(a)	((a) >> 15 & 1)
+#define		I5100_SPDDATA_SBE(a)	((a) >> 13 & 1)
+#define		I5100_SPDDATA_BUSY(a)	((a) >> 12 & 1)
+#define		I5100_SPDDATA_DATA(a)	((a)       & ((1 << 8) - 1))
+#define I5100_SPDCMD		0x4c	/* Serial Presence Detect Command Reg */
+#define		I5100_SPDCMD_DTI(a)	(((a) & ((1 << 4) - 1)) << 28)
+#define		I5100_SPDCMD_CKOVRD(a)	(((a) & 1)              << 27)
+#define		I5100_SPDCMD_SA(a)	(((a) & ((1 << 3) - 1)) << 24)
+#define		I5100_SPDCMD_BA(a)	(((a) & ((1 << 8) - 1)) << 16)
+#define		I5100_SPDCMD_DATA(a)	(((a) & ((1 << 8) - 1)) <<  8)
+#define		I5100_SPDCMD_CMD(a)	((a) & 1)
+#define I5100_TOLM		0x6c	/* Top of Low Memory */
+#define		I5100_TOLM_TOLM(a)	((a) >> 12 & ((1 << 4) - 1))
+#define I5100_MIR0		0x80	/* Memory Interleave Range 0 */
+#define I5100_MIR1		0x84	/* Memory Interleave Range 1 */
+#define I5100_AMIR_0		0x8c	/* Adjusted Memory Interleave Range 0 */
+#define I5100_AMIR_1		0x90	/* Adjusted Memory Interleave Range 1 */
+#define		I5100_MIR_LIMIT(a)	((a) >> 4 & ((1 << 12) - 1))
+#define		I5100_MIR_WAY1(a)	((a) >> 1 & 1)
+#define		I5100_MIR_WAY0(a)	((a)      & 1)
+#define I5100_FERR_NF_MEM	0xa0	/* MC First Non Fatal Errors */
+#define		I5100_FERR_NF_MEM_CHAN_INDX(a)	((a) >> 28 & 1)
+#define		I5100_FERR_NF_MEM_SPD_MASK	(1 << 18)
+#define		I5100_FERR_NF_MEM_M16ERR_MASK	(1 << 16)
+#define		I5100_FERR_NF_MEM_M15ERR_MASK	(1 << 15)
+#define		I5100_FERR_NF_MEM_M14ERR_MASK	(1 << 14)
+#define		I5100_FERR_NF_MEM_
+#define		I5100_FERR_NF_MEM_
+#define		I5100_FERR_NF_MEM_ANY_MASK	\
+			(I5100_FERR_NF_MEM_M16ERR_MASK | \
+			I5100_FERR_NF_MEM_M15ERR_MASK | \
+			I5100_FERR_NF_MEM_M14ERR_MASK)
+#define		I5100_FERR_NF_MEM_ANY(a)  ((a) & I5100_FERR_NF_MEM_ANY_MASK)
+#define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
+#define		I5100_NERR_NF_MEM_ANY(a)  I5100_FERR_NF_MEM_ANY(a)
+
+/* device 21 and 22, func 0 */
+#define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
+#define I5100_DMIR	0x15c	/* DIMM Interleave Range */
+#define		I5100_DMIR_LIMIT(a)	((a) >> 16 & ((1 << 11) - 1))
+#define		I5100_DMIR_RANK(a, i)	((a) >> (4 * i) & ((1 <<  2) - 1))
+#define I5100_MTR_4	0x1b0	/* Memory Technology Registers 4,5 */
+#define		I5100_MTR_PRESENT(a)	((a) >> 10 & 1)
+#define		I5100_MTR_ETHROTTLE(a)	((a) >>  9 & 1)
+#define		I5100_MTR_WIDTH(a)	((a) >>  8 & 1)
+#define		I5100_MTR_NUMBANK(a)	((a) >>  6 & 1)
+#define		I5100_MTR_NUMROW(a)	((a) >>  2 & ((1 << 2) - 1))
+#define		I5100_MTR_NUMCOL(a)	((a)       & ((1 << 2) - 1))
+#define	I5100_VALIDLOG	0x18c	/* Valid Log Markers */
+#define		I5100_VALIDLOG_REDMEMVALID(a)	((a) >> 2 & 1)
+#define		I5100_VALIDLOG_RECMEMVALID(a)	((a) >> 1 & 1)
+#define		I5100_VALIDLOG_NRECMEMVALID(a)	((a)      & 1)
+#define	I5100_NRECMEMA	0x190	/* Non-Recoverable Memory Error Log Reg A */
+#define		I5100_NRECMEMA_MERR(a)		((a) >> 15 & ((1 << 5) - 1))
+#define		I5100_NRECMEMA_BANK(a)		((a) >> 12 & ((1 << 3) - 1))
+#define		I5100_NRECMEMA_RANK(a)		((a) >>  8 & ((1 << 3) - 1))
+#define		I5100_NRECMEMA_DM_BUF_ID(a)	((a)       & ((1 << 8) - 1))
+#define	I5100_NRECMEMB	0x194	/* Non-Recoverable Memory Error Log Reg B */
+#define		I5100_NRECMEMB_CAS(a)		((a) >> 16 & ((1 << 13) - 1))
+#define		I5100_NRECMEMB_RAS(a)		((a)       & ((1 << 16) - 1))
+#define	I5100_REDMEMA	0x198	/* Recoverable Memory Data Error Log Reg A */
+#define		I5100_REDMEMA_SYNDROME(a)	(a)
+#define	I5100_REDMEMB	0x19c	/* Recoverable Memory Data Error Log Reg B */
+#define		I5100_REDMEMB_ECC_LOCATOR(a)	((a) & ((1 << 18) - 1))
+#define	I5100_RECMEMA	0x1a0	/* Recoverable Memory Error Log Reg A */
+#define		I5100_RECMEMA_MERR(a)		I5100_NRECMEMA_MERR(a)
+#define		I5100_RECMEMA_BANK(a)		I5100_NRECMEMA_BANK(a)
+#define		I5100_RECMEMA_RANK(a)		I5100_NRECMEMA_RANK(a)
+#define		I5100_RECMEMA_DM_BUF_ID(a)	I5100_NRECMEMA_DM_BUF_ID(a)
+#define	I5100_RECMEMB	0x1a4	/* Recoverable Memory Error Log Reg B */
+#define		I5100_RECMEMB_CAS(a)		I5100_NRECMEMB_CAS(a)
+#define		I5100_RECMEMB_RAS(a)		I5100_NRECMEMB_RAS(a)
+
+/* some generic limits */
+#define I5100_MAX_RANKS_PER_CTLR	6
+#define I5100_MAX_CTLRS			2
+#define I5100_MAX_RANKS_PER_DIMM	4
+#define I5100_DIMM_ADDR_LINES		(6 - 3)	/* 64 bits / 8 bits per byte */
+#define I5100_MAX_DIMM_SLOTS_PER_CTLR	4
+#define I5100_MAX_RANK_INTERLEAVE	4
+#define I5100_MAX_DMIRS			5
+
+struct i5100_priv {
+	/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
+	int dimm_numrank[I5100_MAX_CTLRS][I5100_MAX_DIMM_SLOTS_PER_CTLR];
+
+	/*
+	 * mainboard chip select map -- maps i5100 chip selects to
+	 * DIMM slot chip selects.  In the case of only 4 ranks per
+	 * controller, the mapping is fairly obvious but not unique.
+	 * we map -1 -> NC and assume both controllers use the same
+	 * map...
+	 *
+	 */
+	int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CTLR][I5100_MAX_RANKS_PER_DIMM];
+
+	/* memory interleave range */
+	struct {
+		u64	 limit;
+		unsigned way[2];
+	} mir[I5100_MAX_CTLRS];
+
+	/* adjusted memory interleave range register */
+	unsigned amir[I5100_MAX_CTLRS];
+
+	/* dimm interleave range */
+	struct {
+		unsigned rank[I5100_MAX_RANK_INTERLEAVE];
+		u64	 limit;
+	} dmir[I5100_MAX_CTLRS][I5100_MAX_DMIRS];
+
+	/* memory technology registers... */
+	struct {
+		unsigned present;	/* 0 or 1 */
+		unsigned ethrottle;	/* 0 or 1 */
+		unsigned width;		/* 4 or 8 bits  */
+		unsigned numbank;	/* 2 or 3 lines */
+		unsigned numrow;	/* 13 .. 16 lines */
+		unsigned numcol;	/* 11 .. 12 lines */
+	} mtr[I5100_MAX_CTLRS][I5100_MAX_RANKS_PER_CTLR];
+
+	u64 tolm;		/* top of low memory in bytes */
+	unsigned ranksperctlr;	/* number of ranks per controller */
+
+	struct pci_dev *mc;	/* device 16 func 1 */
+	struct pci_dev *ch0mm;	/* device 21 func 0 */
+	struct pci_dev *ch1mm;	/* device 22 func 0 */
+};
+
+/* map a rank/ctlr to a slot number on the mainboard */
+static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
+			      int ctlr, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
+		int j;
+		const int numrank = priv->dimm_numrank[ctlr][i];
+
+		for (j = 0; j < numrank; j++)
+			if (priv->dimm_csmap[i][j] == rank)
+				return i * 2 + ctlr;
+	}
+
+	return -1;
+}
+
+/*
+ * The processor bus memory addresses are broken into three
+ * pieces, whereas the controller addresses are contiguous.
+ *
+ * here we map from the controller address space to the
+ * processor address space:
+ *
+ *    Processor Address Space
+ * +-----------------------------+
+ * |                             |
+ * |  "high" memory addresses    |
+ * |                             |
+ * +-----------------------------+ <- 4GB on the i5100
+ * |                             |
+ * |  other non-memory addresses |
+ * |                             |
+ * +-----------------------------+ <- top of low memory
+ * |                             |
+ * | "low" memory addresses      |
+ * |                             |
+ * +-----------------------------+
+ */
+static unsigned long i5100_ctl_page_to_phys(struct mem_ctl_info *mci,
+					    unsigned long cntlr_addr)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	if (cntlr_addr < priv->tolm)
+		return cntlr_addr;
+
+	return (1ULL << 32) + (cntlr_addr - priv->tolm);
+}
+
+static const char *i5100_err_msg(unsigned err)
+{
+	const char *merrs[] = {
+		"unknown", /* 0 */
+		"uncorrectable data ECC on replay", /* 1 */
+		"unknown", /* 2 */
+		"unknown", /* 3 */
+		"aliased uncorrectable demand data ECC", /* 4 */
+		"aliased uncorrectable spare-copy data ECC", /* 5 */
+		"aliased uncorrectable patrol data ECC", /* 6 */
+		"unknown", /* 7 */
+		"unknown", /* 8 */
+		"unknown", /* 9 */
+		"non-aliased uncorrectable demand data ECC", /* 10 */
+		"non-aliased uncorrectable spare-copy data ECC", /* 11 */
+		"non-aliased uncorrectable patrol data ECC", /* 12 */
+		"unknown", /* 13 */
+		"correctable demand data ECC", /* 14 */
+		"correctable spare-copy data ECC", /* 15 */
+		"correctable patrol data ECC", /* 16 */
+		"unknown", /* 17 */
+		"SPD protocol error", /* 18 */
+		"unknown", /* 19 */
+		"spare copy initiated", /* 20 */
+		"spare copy completed", /* 21 */
+	};
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(merrs); i++)
+		if (1 << i & err)
+			return merrs[i];
+
+	return "none";
+}
+
+/* convert csrow index into a rank (per controller -- 0..5) */
+static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow % priv->ranksperctlr;
+}
+
+/* convert csrow index into a controller (0..1) */
+static int i5100_csrow_to_cntlr(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow / priv->ranksperctlr;
+}
+
+static unsigned i5100_rank_to_csrow(const struct mem_ctl_info *mci,
+				    int ctlr, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return ctlr * priv->ranksperctlr + rank;
+}
+
+static void i5100_handle_ce(struct mem_ctl_info *mci,
+			    int ctlr,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
+
+	printk(KERN_ERR
+		"CE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
+		"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
+		ctlr, bank, rank, syndrome, cas, ras,
+		csrow, mci->csrows[csrow].channels[0].label, msg);
+
+	mci->ce_count++;
+	mci->csrows[csrow].ce_count++;
+	mci->csrows[csrow].channels[0].ce_count++;
+}
+
+static void i5100_handle_ue(struct mem_ctl_info *mci,
+			    int ctlr,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
+
+	printk(KERN_ERR
+		"UE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
+		"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
+		ctlr, bank, rank, syndrome, cas, ras,
+		csrow, mci->csrows[csrow].channels[0].label, msg);
+
+	mci->ue_count++;
+	mci->csrows[csrow].ue_count++;
+}
+
+static void i5100_read_log(struct mem_ctl_info *mci, int ctlr,
+			   u32 ferr, u32 nerr)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *pdev = (ctlr) ? priv->ch1mm : priv->ch0mm;
+	u32 dw;
+	u32 dw2;
+	unsigned syndrome = 0;
+	unsigned ecc_loc = 0;
+	unsigned merr;
+	unsigned bank;
+	unsigned rank;
+	unsigned cas;
+	unsigned ras;
+
+	pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
+
+	if (I5100_VALIDLOG_REDMEMVALID(dw)) {
+		pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
+		syndrome = I5100_REDMEMA_SYNDROME(dw2);
+		pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
+		ecc_loc = I5100_REDMEMB_ECC_LOCATOR(dw2);
+	}
+
+	if (I5100_VALIDLOG_RECMEMVALID(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
+		merr = I5100_RECMEMA_MERR(dw2);
+		bank = I5100_RECMEMA_BANK(dw2);
+		rank = I5100_RECMEMA_RANK(dw2);
+
+		pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
+		cas = I5100_RECMEMB_CAS(dw2);
+		ras = I5100_RECMEMB_RAS(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ce(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	if (I5100_VALIDLOG_NRECMEMVALID(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
+		merr = I5100_NRECMEMA_MERR(dw2);
+		bank = I5100_NRECMEMA_BANK(dw2);
+		rank = I5100_NRECMEMA_RANK(dw2);
+
+		pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
+		cas = I5100_NRECMEMB_CAS(dw2);
+		ras = I5100_NRECMEMB_RAS(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ue(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
+}
+
+static void i5100_check_error(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 dw;
+
+
+	pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
+	if (I5100_FERR_NF_MEM_ANY(dw)) {
+		u32 dw2;
+
+		pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
+		if (dw2)
+			pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM,
+					       dw2);
+		pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
+
+		i5100_read_log(mci, I5100_FERR_NF_MEM_CHAN_INDX(dw),
+			       I5100_FERR_NF_MEM_ANY(dw),
+			       I5100_NERR_NF_MEM_ANY(dw2));
+	}
+}
+
+static struct pci_dev *pci_get_device_func(unsigned vendor,
+					   unsigned device,
+					   unsigned func)
+{
+	struct pci_dev *ret = NULL;
+
+	while (1) {
+		ret = pci_get_device(vendor, device, ret);
+
+		if (!ret)
+			break;
+
+		if (PCI_FUNC(ret->devfn) == func)
+			break;
+	}
+
+	return ret;
+}
+
+static unsigned long __devinit i5100_npages(struct mem_ctl_info *mci,
+					    int csrow)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	const unsigned ctlr_rank = i5100_csrow_to_rank(mci, csrow);
+	const unsigned ctlr = i5100_csrow_to_cntlr(mci, csrow);
+	unsigned addr_lines;
+
+	/* dimm present? */
+	if (!priv->mtr[ctlr][ctlr_rank].present)
+		return 0ULL;
+
+	addr_lines =
+		I5100_DIMM_ADDR_LINES +
+		priv->mtr[ctlr][ctlr_rank].numcol +
+		priv->mtr[ctlr][ctlr_rank].numrow +
+		priv->mtr[ctlr][ctlr_rank].numbank;
+
+	return (unsigned long)
+		((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
+}
+
+static void __devinit i5100_init_mtr(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+		struct pci_dev *pdev = mms[i];
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_CTLR; j++) {
+			const unsigned addr =
+				(j < 4) ? I5100_MTR_0 + j * 2 :
+					  I5100_MTR_4 + (j - 4) * 2;
+			u16 w;
+
+			pci_read_config_word(pdev, addr, &w);
+
+			priv->mtr[i][j].present = I5100_MTR_PRESENT(w);
+			priv->mtr[i][j].ethrottle = I5100_MTR_ETHROTTLE(w);
+			priv->mtr[i][j].width = 4 + 4 * I5100_MTR_WIDTH(w);
+			priv->mtr[i][j].numbank = 2 + I5100_MTR_NUMBANK(w);
+			priv->mtr[i][j].numrow = 13 + I5100_MTR_NUMROW(w);
+			priv->mtr[i][j].numcol = 10 + I5100_MTR_NUMCOL(w);
+		}
+	}
+}
+
+/*
+ * FIXME: make this into a real i2c adapter (so that dimm-decode
+ * will work)?
+ */
+static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
+			       u8 ch, u8 slot, u8 addr, u8 *byte)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u16 w;
+	u32 dw;
+	unsigned long et;
+
+	pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+	if (I5100_SPDDATA_BUSY(w))
+		return -1;
+
+	dw =	I5100_SPDCMD_DTI(0xa) |
+		I5100_SPDCMD_CKOVRD(1) |
+		I5100_SPDCMD_SA(ch * 4 + slot) |
+		I5100_SPDCMD_BA(addr) |
+		I5100_SPDCMD_DATA(0) |
+		I5100_SPDCMD_CMD(0);
+	pci_write_config_dword(priv->mc, I5100_SPDCMD, dw);
+
+	/* wait up to 100ms */
+	et = jiffies + HZ / 10;
+	udelay(100);
+	while (1) {
+		pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+		if (!I5100_SPDDATA_BUSY(w))
+			break;
+		udelay(100);
+	}
+
+	if (!I5100_SPDDATA_RDO(w) || I5100_SPDDATA_SBE(w))
+		return -1;
+
+	*byte = I5100_SPDDATA_DATA(w);
+
+	return 0;
+}
+
+/*
+ * fill dimm chip select map
+ *
+ * FIXME:
+ *   o only valid for 4 ranks per controller
+ *   o not the only way to may chip selects to dimm slots
+ *   o investigate if there is some way to obtain this map from the bios
+ */
+static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	WARN_ON(priv->ranksperctlr != 4);
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
+			priv->dimm_csmap[i][j] = -1; /* default NC */
+	}
+
+	/* only 2 chip selects per slot... */
+	priv->dimm_csmap[0][0] = 0;
+	priv->dimm_csmap[0][1] = 3;
+	priv->dimm_csmap[1][0] = 1;
+	priv->dimm_csmap[1][1] = 2;
+	priv->dimm_csmap[2][0] = 2;
+	priv->dimm_csmap[3][0] = 3;
+}
+
+static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
+					     struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CTLR; j++) {
+			u8 rank;
+
+			if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
+				priv->dimm_numrank[i][j] = 0;
+			else
+				priv->dimm_numrank[i][j] = (rank & 3) + 1;
+		}
+	}
+
+	i5100_init_dimm_csmap(mci);
+}
+
+static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
+					      struct mem_ctl_info *mci)
+{
+	u16 w;
+	u32 dw;
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	pci_read_config_word(pdev, I5100_TOLM, &w);
+	priv->tolm = (u64) I5100_TOLM_TOLM(w) * 256 * 1024 * 1024;
+
+	pci_read_config_word(pdev, I5100_MIR0, &w);
+	priv->mir[0].limit = (u64) I5100_MIR_LIMIT(w) << 28;
+	priv->mir[0].way[1] = I5100_MIR_WAY1(w);
+	priv->mir[0].way[0] = I5100_MIR_WAY0(w);
+
+	pci_read_config_word(pdev, I5100_MIR1, &w);
+	priv->mir[1].limit = (u64) I5100_MIR_LIMIT(w) << 28;
+	priv->mir[1].way[1] = I5100_MIR_WAY1(w);
+	priv->mir[1].way[0] = I5100_MIR_WAY0(w);
+
+	pci_read_config_word(pdev, I5100_AMIR_0, &w);
+	priv->amir[0] = w;
+	pci_read_config_word(pdev, I5100_AMIR_1, &w);
+	priv->amir[1] = w;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+
+		for (j = 0; j < 5; j++) {
+			int k;
+
+			pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
+
+			priv->dmir[i][j].limit =
+				(u64) I5100_DMIR_LIMIT(dw) << 28;
+			for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
+				priv->dmir[i][j].rank[k] =
+					I5100_DMIR_RANK(dw, k);
+		}
+	}
+
+	i5100_init_mtr(mci);
+}
+
+static void __devinit i5100_init_csrows(struct mem_ctl_info *mci)
+{
+	int i;
+	unsigned long total_pages = 0UL;
+	struct i5100_priv *priv = mci->pvt_info;
+
+	for (i = 0; i < mci->nr_csrows; i++) {
+		const unsigned long npages = i5100_npages(mci, i);
+		const unsigned cntlr = i5100_csrow_to_cntlr(mci, i);
+		const unsigned rank = i5100_csrow_to_rank(mci, i);
+
+		if (!npages)
+			continue;
+
+		/*
+		 * FIXME: these two are totally bogus -- I don't see how to
+		 * map them correctly to this structure...
+		 */
+		mci->csrows[i].first_page = total_pages;
+		mci->csrows[i].last_page = total_pages + npages - 1;
+		mci->csrows[i].page_mask = 0UL;
+
+		mci->csrows[i].nr_pages = npages;
+		mci->csrows[i].grain = 32;
+		mci->csrows[i].csrow_idx = i;
+		mci->csrows[i].dtype =
+			(priv->mtr[cntlr][rank].width == 4) ? DEV_X4 : DEV_X8;
+		mci->csrows[i].ue_count = 0;
+		mci->csrows[i].ce_count = 0;
+		mci->csrows[i].mtype = MEM_RDDR2;
+		mci->csrows[i].edac_mode = EDAC_SECDED;
+		mci->csrows[i].mci = mci;
+		mci->csrows[i].nr_channels = 1;
+		mci->csrows[i].channels[0].chan_idx = 0;
+		mci->csrows[i].channels[0].ce_count = 0;
+		mci->csrows[i].channels[0].csrow = mci->csrows + i;
+		snprintf(mci->csrows[i].channels[0].label,
+			 sizeof(mci->csrows[i].channels[0].label),
+			 "DIMM%u", i5100_rank_to_slot(mci, cntlr, rank));
+
+		total_pages += npages;
+	}
+}
+
+static int __devinit i5100_init_one(struct pci_dev *pdev,
+				    const struct pci_device_id *id)
+{
+	int rc;
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+	struct pci_dev *ch0mm, *ch1mm;
+	int ret = 0;
+	u32 dw;
+	int ranksperch;
+
+	if (PCI_FUNC(pdev->devfn) != 1)
+		return -ENODEV;
+
+	rc = pci_enable_device(pdev);
+	if (rc < 0) {
+		ret = rc;
+		goto bail;
+	}
+
+	/* figure out how many ranks, from strapped state of 48GB_Mode input */
+	pci_read_config_dword(pdev, I5100_MS, &dw);
+	ranksperch = !!(dw & (1 << 8)) * 2 + 4;
+
+	if (ranksperch != 4) {
+		/* FIXME: get 6 ranks / controller to work - need hw... */
+		printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
+		ret = -ENODEV;
+		goto bail;
+	}
+
+	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
+	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_21, 0);
+	if (!ch0mm)
+		return -ENODEV;
+
+	rc = pci_enable_device(ch0mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch0;
+	}
+
+	/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
+	ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_22, 0);
+	if (!ch1mm) {
+		ret = -ENODEV;
+		goto bail_ch0;
+	}
+
+	rc = pci_enable_device(ch1mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch1;
+	}
+
+	mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
+	if (!mci) {
+		ret = -ENOMEM;
+		goto bail_ch1;
+	}
+
+	mci->dev = &pdev->dev;
+
+	priv = mci->pvt_info;
+	priv->ranksperctlr = ranksperch;
+	priv->mc = pdev;
+	priv->ch0mm = ch0mm;
+	priv->ch1mm = ch1mm;
+
+	i5100_init_dimm_layout(pdev, mci);
+	i5100_init_interleaving(pdev, mci);
+
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = "i5100_edac.c";
+	mci->mod_ver = "not versioned";
+	mci->ctl_name = "i5100";
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = i5100_ctl_page_to_phys;
+
+	mci->edac_check = i5100_check_error;
+
+	i5100_init_csrows(mci);
+
+	/* this strange construction seems to be in every driver, dunno why */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_NMI:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_POLL;
+		break;
+	}
+
+	if (edac_mc_add_mc(mci)) {
+		ret = -ENODEV;
+		goto bail_mc;
+	}
+
+	goto bail;
+
+bail_mc:
+	edac_mc_free(mci);
+
+bail_ch1:
+	pci_dev_put(ch1mm);
+
+bail_ch0:
+	pci_dev_put(ch0mm);
+
+bail:
+	return ret;
+}
+
+static void __devexit i5100_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+
+	mci = edac_mc_del_mc(&pdev->dev);
+
+	if (!mci)
+		return;
+
+	priv = mci->pvt_info;
+	pci_dev_put(priv->ch0mm);
+	pci_dev_put(priv->ch1mm);
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i5100_pci_tbl[] __devinitdata = {
+	/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
+
+static struct pci_driver i5100_driver = {
+	.name = KBUILD_BASENAME,
+	.probe = i5100_init_one,
+	.remove = __devexit_p(i5100_remove_one),
+	.id_table = i5100_pci_tbl,
+};
+
+static int __init i5100_init(void)
+{
+	int pci_rc;
+
+	pci_rc = pci_register_driver(&i5100_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+static void __exit i5100_exit(void)
+{
+	pci_unregister_driver(&i5100_driver);
+}
+
+module_init(i5100_init);
+module_exit(i5100_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR
+    ("Arthur Jones <ajones@...erbed.com>");
+MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");
Index: linux-2.6.26-rc5-mm3.full/include/linux/pci_ids.h
===================================================================
--- linux-2.6.26-rc5-mm3.full.orig/include/linux/pci_ids.h
+++ linux-2.6.26-rc5-mm3.full/include/linux/pci_ids.h
@@ -2387,6 +2387,9 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
+#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
 #define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
 #define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
 #define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists