| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 27 Jun 2008 16:50:38 +1000
From: NeilBrown <neilb@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-raid@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 012 of 29] md: rationalise return value for ->hot_add_disk method.
For all array types but linear, ->hot_add_disk returns 1 on
success, 0 on failure.
For linear, it returns 0 on success and -errno on failure.
This doesn't cause a functional problem because the ->hot_add_disk
function of linear is used quite differently to the others.
However it is confusing.
So convert all to return 0 for success or -errno on failure
and fix call sites to match.
Signed-off-by: Neil Brown <neilb@...e.de>
### Diffstat output
./drivers/md/md.c | 7 +++----
./drivers/md/multipath.c | 8 +++++---
./drivers/md/raid1.c | 6 +++---
./drivers/md/raid10.c | 10 +++++-----
./drivers/md/raid5.c | 10 +++++-----
5 files changed, 21 insertions(+), 20 deletions(-)
diff .prev/drivers/md/md.c ./drivers/md/md.c
--- .prev/drivers/md/md.c 2008-06-27 16:20:35.000000000 +1000
+++ ./drivers/md/md.c 2008-06-27 16:20:38.000000000 +1000
@@ -1977,10 +1977,8 @@ slot_store(mdk_rdev_t *rdev, const char
rdev->saved_raid_disk = -1;
err = rdev->mddev->pers->
hot_add_disk(rdev->mddev, rdev);
- if (err != 1) {
+ if (err) {
rdev->raid_disk = -1;
- if (err == 0)
- return -EEXIST;
return err;
}
sprintf(nm, "rd%d", rdev->raid_disk);
@@ -5920,7 +5918,8 @@ static int remove_and_add_spares(mddev_t
if (rdev->raid_disk < 0
&& !test_bit(Faulty, &rdev->flags)) {
rdev->recovery_offset = 0;
- if (mddev->pers->hot_add_disk(mddev,rdev)) {
+ if (mddev->pers->
+ hot_add_disk(mddev, rdev) == 0) {
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
diff .prev/drivers/md/multipath.c ./drivers/md/multipath.c
--- .prev/drivers/md/multipath.c 2008-06-27 16:20:35.000000000 +1000
+++ ./drivers/md/multipath.c 2008-06-27 16:20:38.000000000 +1000
@@ -281,7 +281,7 @@ static int multipath_add_disk(mddev_t *m
{
multipath_conf_t *conf = mddev->private;
struct request_queue *q;
- int found = 0;
+ int err = -EEXIST;
int path;
struct multipath_info *p;
int first = 0;
@@ -312,11 +312,13 @@ static int multipath_add_disk(mddev_t *m
rdev->raid_disk = path;
set_bit(In_sync, &rdev->flags);
rcu_assign_pointer(p->rdev, rdev);
- found = 1;
+ err = 0;
+ break;
}
print_multipath_conf(conf);
- return found;
+
+ return err;
}
static int multipath_remove_disk(mddev_t *mddev, int number)
diff .prev/drivers/md/raid10.c ./drivers/md/raid10.c
--- .prev/drivers/md/raid10.c 2008-06-27 16:20:35.000000000 +1000
+++ ./drivers/md/raid10.c 2008-06-27 16:20:38.000000000 +1000
@@ -1113,7 +1113,7 @@ static int raid10_spare_active(mddev_t *
static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
{
conf_t *conf = mddev->private;
- int found = 0;
+ int err = -EEXIST;
int mirror;
mirror_info_t *p;
int first = 0;
@@ -1123,9 +1123,9 @@ static int raid10_add_disk(mddev_t *mdde
/* only hot-add to in-sync arrays, as recovery is
* very different from resync
*/
- return 0;
+ return -EBUSY;
if (!enough(conf))
- return 0;
+ return -EINVAL;
if (rdev->raid_disk)
first = last = rdev->raid_disk;
@@ -1151,7 +1151,7 @@ static int raid10_add_disk(mddev_t *mdde
p->head_position = 0;
rdev->raid_disk = mirror;
- found = 1;
+ err = 0;
if (rdev->saved_raid_disk != mirror)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
@@ -1159,7 +1159,7 @@ static int raid10_add_disk(mddev_t *mdde
}
print_conf(conf);
- return found;
+ return err;
}
static int raid10_remove_disk(mddev_t *mddev, int number)
diff .prev/drivers/md/raid1.c ./drivers/md/raid1.c
--- .prev/drivers/md/raid1.c 2008-06-27 16:20:35.000000000 +1000
+++ ./drivers/md/raid1.c 2008-06-27 16:20:38.000000000 +1000
@@ -1100,7 +1100,7 @@ static int raid1_spare_active(mddev_t *m
static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
{
conf_t *conf = mddev->private;
- int found = 0;
+ int err = -EEXIST;
int mirror = 0;
mirror_info_t *p;
int first = 0;
@@ -1124,7 +1124,7 @@ static int raid1_add_disk(mddev_t *mddev
p->head_position = 0;
rdev->raid_disk = mirror;
- found = 1;
+ err = 0;
/* As all devices are equivalent, we don't need a full recovery
* if this was recently any drive of the array
*/
@@ -1135,7 +1135,7 @@ static int raid1_add_disk(mddev_t *mddev
}
print_conf(conf);
- return found;
+ return err;
}
static int raid1_remove_disk(mddev_t *mddev, int number)
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2008-06-27 16:20:35.000000000 +1000
+++ ./drivers/md/raid5.c 2008-06-27 16:20:58.000000000 +1000
@@ -4604,7 +4604,7 @@ abort:
static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
{
raid5_conf_t *conf = mddev->private;
- int found = 0;
+ int err = -EEXIST;
int disk;
struct disk_info *p;
int first = 0;
@@ -4612,7 +4612,7 @@ static int raid5_add_disk(mddev_t *mddev
if (mddev->degraded > conf->max_degraded)
/* no point adding a device */
- return 0;
+ return -EINVAL;
if (rdev->raid_disk >= 0)
first = last = rdev->raid_disk;
@@ -4631,14 +4631,14 @@ static int raid5_add_disk(mddev_t *mddev
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
- found = 1;
+ err = 0;
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
break;
}
print_raid5_conf(conf);
- return found;
+ return err;
}
static int raid5_resize(mddev_t *mddev, sector_t sectors)
@@ -4739,7 +4739,7 @@ static int raid5_start_reshape(mddev_t *
rdev_for_each(rdev, rtmp, mddev)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags)) {
- if (raid5_add_disk(mddev, rdev)) {
+ if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
set_bit(In_sync, &rdev->flags);
added_devices++;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists