| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080628150941.GA14018@havoc.gtf.org>
Date: Sat, 28 Jun 2008 11:09:42 -0400
From: Jeff Garzik <jeff@...zik.org>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] net driver updates for .27
This is rebased and updated from the last pull. The lone change:
dropped retina driver, as it needs further work.
Please pull from 'davem-next' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git davem-next
to receive the following updates:
Documentation/networking/dm9000.txt | 167 ++++
arch/blackfin/mach-bf527/boards/ezkit.c | 7 +-
arch/blackfin/mach-bf533/boards/H8606.c | 7 +-
arch/blackfin/mach-bf537/boards/generic_board.c | 7 +-
drivers/net/8139cp.c | 1 -
drivers/net/8139too.c | 13 +-
drivers/net/Kconfig | 31 +-
drivers/net/cxgb3/cxgb3_offload.c | 21 +-
drivers/net/cxgb3/t3cdev.h | 3 +-
drivers/net/dl2k.c | 2 +-
drivers/net/dm9000.c | 1159 ++++++++++++-----------
drivers/net/dm9000.h | 11 +
drivers/net/e1000/e1000_main.c | 34 -
drivers/net/e1000e/e1000.h | 4 +
drivers/net/e1000e/netdev.c | 48 +-
drivers/net/fealnx.c | 43 +-
drivers/net/forcedeth.c | 5 +
drivers/net/igb/igb.h | 4 +
drivers/net/igb/igb_main.c | 47 +-
drivers/net/ixgbe/ixgbe.h | 9 +
drivers/net/ixgbe/ixgbe_ethtool.c | 11 +
drivers/net/ixgbe/ixgbe_main.c | 111 ++-
drivers/net/pci-skeleton.c | 1 -
drivers/net/sh_eth.c | 4 +-
drivers/net/sh_eth.h | 4 +-
drivers/net/tsi108_eth.c | 1 -
drivers/net/tulip/21142.c | 6 +-
drivers/net/tulip/de2104x.c | 10 +-
drivers/net/tulip/eeprom.c | 6 +-
drivers/net/tulip/interrupt.c | 5 +-
drivers/net/tulip/media.c | 5 +-
drivers/net/tulip/pnic.c | 5 +-
drivers/net/tulip/pnic2.c | 5 +-
drivers/net/tulip/timer.c | 6 +-
drivers/net/tulip/tulip.h | 4 +-
drivers/net/tulip/tulip_core.c | 8 +-
drivers/net/typhoon.c | 3 -
drivers/net/usb/rndis_host.c | 14 +-
drivers/net/wireless/rndis_wlan.c | 4 +-
drivers/pci/pci-acpi.c | 20 +
include/linux/dm9000.h | 1 +
include/linux/usb/rndis_host.h | 3 +-
42 files changed, 1122 insertions(+), 738 deletions(-)
create mode 100644 Documentation/networking/dm9000.txt
Andy Gospodarek (1):
e1000: remove e1000_clean_tx_irq call from e1000_netpoll
Auke Kok (1):
e1000: remove PCI Express device IDs
Ben Dooks (10):
DM9000: Add support for DM9000A and DM9000B chips
DM9000: Cleanups after the resource changes
DM9000: Cleanup source code
DM9000: Cleanup source code - remove forward declerations
DM9000: Use NSR to determine link-status on internal PHY
DM9000: Allow the use of the NSR register to get link status.
DM9000: Add missing msleep() in EEPROM wait code.
DM9000: Re-unite menuconfig entries for DM9000 driver
DM9000: Remove DEFAULT_TRIGGER for request_irq() flags.
DM9000: Add documentation for the driver.
Divy Le Ray (1):
cxgb3 - add missing adapter type for RDMA
Grant Grundler (1):
drivers/net/tulip: update first comment in tulip files
Harvey Harrison (1):
tulip: remove wrapper around get_unaligned
Jeff Garzik (2):
[netdrvr] fealnx: clean up nasty mess of arch ifdefs
[netdrvr] kill sync_irq-before-freq_irq pattern
Jussi Kivilinna (1):
rndis_host: pass buffer length to rndis_command
Laurent Pinchart (2):
DM9000: Remove the 2 resources probe scheme.
DM9000: Fixup blackfin after removing 2 resource usage
Mallikarjuna R Chilakala (1):
ixgbe: add LRO support
Márton Németh (1):
8139too: some style cleanups
Nobuhiro Iwamatsu (1):
net: sh_eth: Fix compile error sh_eth
Taku Izumi (2):
e1000e: make ioport free
igb: make ioport free
Tobias Diedrich (2):
Fix forcedeth hibernate/wake-on-lan problems
Fix forcedeth hibernate/wake-on-lan problems
diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/dm9000.txt
new file mode 100644
index 0000000..65df3de
--- /dev/null
+++ b/Documentation/networking/dm9000.txt
@@ -0,0 +1,167 @@
+DM9000 Network driver
+=====================
+
+Copyright 2008 Simtec Electronics,
+ Ben Dooks <ben@...tec.co.uk> <ben-linux@...ff.org>
+
+
+Introduction
+------------
+
+This file describes how to use the DM9000 platform-device based network driver
+that is contained in the files drivers/net/dm9000.c and drivers/net/dm9000.h.
+
+The driver supports three DM9000 variants, the DM9000E which is the first chip
+supported as well as the newer DM9000A and DM9000B devices. It is currently
+maintained and tested by Ben Dooks, who should be CC: to any patches for this
+driver.
+
+
+Defining the platform device
+----------------------------
+
+The minimum set of resources attached to the platform device are as follows:
+
+ 1) The physical address of the address register
+ 2) The physical address of the data register
+ 3) The IRQ line the device's interrupt pin is connected to.
+
+These resources should be specified in that order, as the ordering of the
+two address regions is important (the driver expects these to be address
+and then data).
+
+An example from arch/arm/mach-s3c2410/mach-bast.c is:
+
+static struct resource bast_dm9k_resource[] = {
+ [0] = {
+ .start = S3C2410_CS5 + BAST_PA_DM9000,
+ .end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
+ .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_DM9000,
+ .end = IRQ_DM9000,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ }
+};
+
+static struct platform_device bast_device_dm9k = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_dm9k_resource),
+ .resource = bast_dm9k_resource,
+};
+
+Note the setting of the IRQ trigger flag in bast_dm9k_resource[2].flags,
+as this will generate a warning if it is not present. The trigger from
+the flags field will be passed to request_irq() when registering the IRQ
+handler to ensure that the IRQ is setup correctly.
+
+This shows a typical platform device, without the optional configuration
+platform data supplied. The next example uses the same resources, but adds
+the optional platform data to pass extra configuration data:
+
+static struct dm9000_plat_data bast_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device bast_device_dm9k = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bast_dm9k_resource),
+ .resource = bast_dm9k_resource,
+ .dev = {
+ .platform_data = &bast_dm9k_platdata,
+ }
+};
+
+The platform data is defined in include/linux/dm9000.h and described below.
+
+
+Platform data
+-------------
+
+Extra platform data for the DM9000 can describe the IO bus width to the
+device, whether or not an external PHY is attached to the device and
+the availability of an external configuration EEPROM.
+
+The flags for the platform data .flags field are as follows:
+
+DM9000_PLATF_8BITONLY
+
+ The IO should be done with 8bit operations.
+
+DM9000_PLATF_16BITONLY
+
+ The IO should be done with 16bit operations.
+
+DM9000_PLATF_32BITONLY
+
+ The IO should be done with 32bit operations.
+
+DM9000_PLATF_EXT_PHY
+
+ The chip is connected to an external PHY.
+
+DM9000_PLATF_NO_EEPROM
+
+ This can be used to signify that the board does not have an
+ EEPROM, or that the EEPROM should be hidden from the user.
+
+DM9000_PLATF_SIMPLE_PHY
+
+ Switch to using the simpler PHY polling method which does not
+ try and read the MII PHY state regularly. This is only available
+ when using the internal PHY. See the section on link state polling
+ for more information.
+
+ The config symbol DM9000_FORCE_SIMPLE_PHY_POLL, Kconfig entry
+ "Force simple NSR based PHY polling" allows this flag to be
+ forced on at build time.
+
+
+PHY Link state polling
+----------------------
+
+The driver keeps track of the link state and informs the network core
+about link (carrier) availablilty. This is managed by several methods
+depending on the version of the chip and on which PHY is being used.
+
+For the internal PHY, the original (and currently default) method is
+to read the MII state, either when the status changes if we have the
+necessary interrupt support in the chip or every two seconds via a
+periodic timer.
+
+To reduce the overhead for the internal PHY, there is now the option
+of using the DM9000_FORCE_SIMPLE_PHY_POLL config, or DM9000_PLATF_SIMPLE_PHY
+platform data option to read the summary information without the
+expensive MII accesses. This method is faster, but does not print
+as much information.
+
+When using an external PHY, the driver currently has to poll the MII
+link status as there is no method for getting an interrupt on link change.
+
+
+DM9000A / DM9000B
+-----------------
+
+These chips are functionally similar to the DM9000E and are supported easily
+by the same driver. The features are:
+
+ 1) Interrupt on internal PHY state change. This means that the periodic
+ polling of the PHY status may be disabled on these devices when using
+ the internal PHY.
+
+ 2) TCP/UDP checksum offloading, which the driver does not currently support.
+
+
+ethtool
+-------
+
+The driver supports the ethtool interface for access to the driver
+state information, the PHY state and the EEPROM.
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5958eec..689b69c 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -323,10 +323,15 @@ static struct platform_device smc91x_device = {
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
- .end = 0x203FB800 + 8,
+ .end = 0x203FB800 + 1,
.flags = IORESOURCE_MEM,
},
[1] = {
+ .start = 0x203FB800 + 4,
+ .end = 0x203FB800 + 5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 7cc4864..4103a97 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -65,10 +65,15 @@ static struct platform_device rtc_device = {
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
- .end = 0x20300000 + 8,
+ .end = 0x20300000 + 1,
.flags = IORESOURCE_MEM,
},
[1] = {
+ .start = 0x20300000 + 4,
+ .end = 0x20300000 + 5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
.start = IRQ_PF10,
.end = IRQ_PF10,
.flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 7d25082..01b63e2 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -166,10 +166,15 @@ static struct platform_device smc91x_device = {
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
- .end = 0x203FB800 + 8,
+ .end = 0x203FB800 + 1,
.flags = IORESOURCE_MEM,
},
[1] = {
+ .start = 0x203FB800 + 4,
+ .end = 0x203FB800 + 5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 934db35..6011d6f 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1213,7 +1213,6 @@ static int cp_close (struct net_device *dev)
spin_unlock_irqrestore(&cp->lock, flags);
- synchronize_irq(dev->irq);
free_irq(dev->irq, dev);
cp_free_rings(cp);
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index b23a00c..75317a1 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -107,8 +107,8 @@
#include <linux/mii.h>
#include <linux/completion.h>
#include <linux/crc32.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <asm/irq.h>
#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
@@ -134,7 +134,7 @@
#if RTL8139_DEBUG
/* note: prints function name for you */
-# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
+# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
#else
# define DPRINTK(fmt, args...)
#endif
@@ -145,7 +145,7 @@
# define assert(expr) \
if(unlikely(!(expr))) { \
printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__FUNCTION__,__LINE__); \
+ #expr, __FILE__, __func__, __LINE__); \
}
#endif
@@ -219,7 +219,7 @@ enum {
#define RTL8139B_IO_SIZE 256
#define RTL8129_CAPS HAS_MII_XCVR
-#define RTL8139_CAPS HAS_CHIP_XCVR|HAS_LNK_CHNG
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
typedef enum {
RTL8139 = 0,
@@ -1889,7 +1889,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
}
#if RX_BUF_IDX == 3
-static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
u32 offset, unsigned int size)
{
u32 left = RX_BUF_LEN - offset;
@@ -2231,7 +2231,6 @@ static int rtl8139_close (struct net_device *dev)
spin_unlock_irqrestore (&tp->lock, flags);
- synchronize_irq (dev->irq); /* racy, but that's ok here */
free_irq (dev->irq, dev);
rtl8139_tx_clear (tp);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 287d087..d85b9d0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -938,6 +938,23 @@ config DM9000
To compile this driver as a module, choose M here. The module
will be called dm9000.
+config DM9000_DEBUGLEVEL
+ int "DM9000 maximum debug level"
+ depends on DM9000
+ default 4
+ help
+ The maximum level of debugging code compiled into the DM9000
+ driver.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+ bool "Force simple NSR based PHY polling"
+ depends on DM9000
+ ---help---
+ This configuration forces the DM9000 to use the NSR's LinkStatus
+ bit to determine if the link is up or down instead of the more
+ costly MII PHY reads. Note, this will not work if the chip is
+ operating with an external PHY.
+
config ENC28J60
tristate "ENC28J60 support"
depends on EXPERIMENTAL && SPI && NET_ETHERNET
@@ -955,14 +972,6 @@ config ENC28J60_WRITEVERIFY
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
-config DM9000_DEBUGLEVEL
- int "DM9000 maximum debug level"
- depends on DM9000
- default 4
- help
- The maximum level of debugging code compiled into the DM9000
- driver.
-
config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
@@ -2025,9 +2034,6 @@ config E1000E
To compile this driver as a module, choose M here. The module
will be called e1000e.
-config E1000E_ENABLED
- def_bool E1000E != n
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
@@ -2462,7 +2468,8 @@ config EHEA
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
- depends on PCI
+ depends on PCI && INET
+ select INET_LRO
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index ff9c013..ae6ff5d 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1248,6 +1248,25 @@ static inline void unregister_tdev(struct t3cdev *tdev)
mutex_unlock(&cxgb3_db_lock);
}
+static inline int adap2type(struct adapter *adapter)
+{
+ int type = 0;
+
+ switch (adapter->params.rev) {
+ case T3_REV_A:
+ type = T3A;
+ break;
+ case T3_REV_B:
+ case T3_REV_B2:
+ type = T3B;
+ break;
+ case T3_REV_C:
+ type = T3C;
+ break;
+ }
+ return type;
+}
+
void __devinit cxgb3_adapter_ofld(struct adapter *adapter)
{
struct t3cdev *tdev = &adapter->tdev;
@@ -1257,7 +1276,7 @@ void __devinit cxgb3_adapter_ofld(struct adapter *adapter)
cxgb3_set_dummy_ops(tdev);
tdev->send = t3_offload_tx;
tdev->ctl = cxgb_offload_ctl;
- tdev->type = adapter->params.rev == 0 ? T3A : T3B;
+ tdev->type = adap2type(adapter);
register_tdev(tdev);
}
diff --git a/drivers/net/cxgb3/t3cdev.h b/drivers/net/cxgb3/t3cdev.h
index a18c8a1..8556628 100644
--- a/drivers/net/cxgb3/t3cdev.h
+++ b/drivers/net/cxgb3/t3cdev.h
@@ -45,7 +45,8 @@ struct cxgb3_client;
enum t3ctype {
T3A = 0,
- T3B
+ T3B,
+ T3C,
};
struct t3cdev {
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 8277e89..f803711 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -1753,7 +1753,7 @@ rio_close (struct net_device *dev)
/* Stop Tx and Rx logics */
writel (TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl);
- synchronize_irq (dev->irq);
+
free_irq (dev->irq, dev);
del_timer_sync (&np->timer);
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 08a7365..952e10d 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -44,9 +44,8 @@
#define DM9000_PHY 0x40 /* PHY address 0x01 */
-#define CARDNAME "dm9000"
-#define PFX CARDNAME ": "
-#define DRV_VERSION "1.30"
+#define CARDNAME "dm9000"
+#define DRV_VERSION "1.31"
#ifdef CONFIG_BLACKFIN
#define readsb insb
@@ -55,9 +54,6 @@
#define writesb outsb
#define writesw outsw
#define writesl outsl
-#define DEFAULT_TRIGGER IRQF_TRIGGER_HIGH
-#else
-#define DEFAULT_TRIGGER (0)
#endif
/*
@@ -85,23 +81,36 @@ MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
* these two devices.
*/
+/* The driver supports the original DM9000E, and now the two newer
+ * devices, DM9000A and DM9000B.
+ */
+
+enum dm9000_type {
+ TYPE_DM9000E, /* original DM9000 */
+ TYPE_DM9000A,
+ TYPE_DM9000B
+};
+
/* Structure/enum declaration ------------------------------- */
typedef struct board_info {
- void __iomem *io_addr; /* Register I/O base address */
- void __iomem *io_data; /* Data I/O address */
- u16 irq; /* IRQ */
+ void __iomem *io_addr; /* Register I/O base address */
+ void __iomem *io_data; /* Data I/O address */
+ u16 irq; /* IRQ */
- u16 tx_pkt_cnt;
- u16 queue_pkt_len;
- u16 queue_start_addr;
- u16 dbug_cnt;
- u8 io_mode; /* 0:word, 2:byte */
- u8 phy_addr;
- unsigned int flags;
- unsigned int in_suspend :1;
+ u16 tx_pkt_cnt;
+ u16 queue_pkt_len;
+ u16 queue_start_addr;
+ u16 dbug_cnt;
+ u8 io_mode; /* 0:word, 2:byte */
+ u8 phy_addr;
+ u8 imr_all;
- int debug_level;
+ unsigned int flags;
+ unsigned int in_suspend :1;
+ int debug_level;
+
+ enum dm9000_type type;
void (*inblk)(void __iomem *port, void *data, int length);
void (*outblk)(void __iomem *port, void *data, int length);
@@ -120,10 +129,10 @@ typedef struct board_info {
struct delayed_work phy_poll;
struct net_device *ndev;
- spinlock_t lock;
+ spinlock_t lock;
struct mii_if_info mii;
- u32 msg_enable;
+ u32 msg_enable;
} board_info_t;
/* debug code */
@@ -140,26 +149,6 @@ static inline board_info_t *to_dm9000_board(struct net_device *dev)
return dev->priv;
}
-/* function declaration ------------------------------------- */
-static int dm9000_probe(struct platform_device *);
-static int dm9000_open(struct net_device *);
-static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
-static int dm9000_stop(struct net_device *);
-static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd);
-
-static void dm9000_init_dm9000(struct net_device *);
-
-static irqreturn_t dm9000_interrupt(int, void *);
-
-static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg);
-static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg,
- int value);
-
-static void dm9000_read_eeprom(board_info_t *, int addr, u8 *to);
-static void dm9000_write_eeprom(board_info_t *, int addr, u8 *dp);
-static void dm9000_rx(struct net_device *);
-static void dm9000_hash_table(struct net_device *);
-
/* DM9000 network board routine ---------------------------- */
static void
@@ -302,52 +291,135 @@ static void dm9000_set_io(struct board_info *db, int byte_width)
static void dm9000_schedule_poll(board_info_t *db)
{
- schedule_delayed_work(&db->phy_poll, HZ * 2);
+ if (db->type == TYPE_DM9000E)
+ schedule_delayed_work(&db->phy_poll, HZ * 2);
}
-/* Our watchdog timed out. Called by the networking layer */
-static void dm9000_timeout(struct net_device *dev)
+static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL);
+}
+
+static unsigned int
+dm9000_read_locked(board_info_t *db, int reg)
{
- board_info_t *db = (board_info_t *) dev->priv;
- u8 reg_save;
unsigned long flags;
+ unsigned int ret;
- /* Save previous register address */
- reg_save = readb(db->io_addr);
- spin_lock_irqsave(&db->lock,flags);
+ spin_lock_irqsave(&db->lock, flags);
+ ret = ior(db, reg);
+ spin_unlock_irqrestore(&db->lock, flags);
- netif_stop_queue(dev);
- dm9000_reset(db);
- dm9000_init_dm9000(dev);
- /* We can accept TX packets again */
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
+ return ret;
+}
- /* Restore previous register address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
+static int dm9000_wait_eeprom(board_info_t *db)
+{
+ unsigned int status;
+ int timeout = 8; /* wait max 8msec */
+
+ /* The DM9000 data sheets say we should be able to
+ * poll the ERRE bit in EPCR to wait for the EEPROM
+ * operation. From testing several chips, this bit
+ * does not seem to work.
+ *
+ * We attempt to use the bit, but fall back to the
+ * timeout (which is why we do not return an error
+ * on expiry) to say that the EEPROM operation has
+ * completed.
+ */
+
+ while (1) {
+ status = dm9000_read_locked(db, DM9000_EPCR);
+
+ if ((status & EPCR_ERRE) == 0)
+ break;
+
+ msleep(1);
+
+ if (timeout-- < 0) {
+ dev_dbg(db->dev, "timeout waiting EEPROM\n");
+ break;
+ }
+ }
+
+ return 0;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
/*
- *Used by netconsole
+ * Read a word data from EEPROM
*/
-static void dm9000_poll_controller(struct net_device *dev)
+static void
+dm9000_read_eeprom(board_info_t *db, int offset, u8 *to)
{
- disable_irq(dev->irq);
- dm9000_interrupt(dev->irq,dev);
- enable_irq(dev->irq);
+ unsigned long flags;
+
+ if (db->flags & DM9000_PLATF_NO_EEPROM) {
+ to[0] = 0xff;
+ to[1] = 0xff;
+ return;
+ }
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPCR, EPCR_ERPRR);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_wait_eeprom(db);
+
+ /* delay for at-least 150uS */
+ msleep(1);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ iow(db, DM9000_EPCR, 0x0);
+
+ to[0] = ior(db, DM9000_EPDRL);
+ to[1] = ior(db, DM9000_EPDRH);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
}
-#endif
-static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+/*
+ * Write a word data to SROM
+ */
+static void
+dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
{
- board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
- if (!netif_running(dev))
- return -EINVAL;
+ if (db->flags & DM9000_PLATF_NO_EEPROM)
+ return;
- return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+ iow(db, DM9000_EPAR, offset);
+ iow(db, DM9000_EPDRH, data[1]);
+ iow(db, DM9000_EPDRL, data[0]);
+ iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_wait_eeprom(db);
+
+ mdelay(1); /* wait at least 150uS to clear */
+
+ spin_lock_irqsave(&db->lock, flags);
+ iow(db, DM9000_EPCR, 0);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
}
/* ethtool ops */
@@ -400,7 +472,14 @@ static int dm9000_nway_reset(struct net_device *dev)
static u32 dm9000_get_link(struct net_device *dev)
{
board_info_t *dm = to_dm9000_board(dev);
- return mii_link_ok(&dm->mii);
+ u32 ret;
+
+ if (dm->flags & DM9000_PLATF_EXT_PHY)
+ ret = mii_link_ok(&dm->mii);
+ else
+ ret = dm9000_read_locked(dm, DM9000_NSR) & NSR_LINKST ? 1 : 0;
+
+ return ret;
}
#define DM_EEPROM_MAGIC (0x444D394B)
@@ -472,15 +551,48 @@ static const struct ethtool_ops dm9000_ethtool_ops = {
.set_eeprom = dm9000_set_eeprom,
};
+static void dm9000_show_carrier(board_info_t *db,
+ unsigned carrier, unsigned nsr)
+{
+ struct net_device *ndev = db->ndev;
+ unsigned ncr = dm9000_read_locked(db, DM9000_NCR);
+
+ if (carrier)
+ dev_info(db->dev, "%s: link up, %dMbps, %s-duplex, no LPA\n",
+ ndev->name, (nsr & NSR_SPEED) ? 10 : 100,
+ (ncr & NCR_FDX) ? "full" : "half");
+ else
+ dev_info(db->dev, "%s: link down\n", ndev->name);
+}
+
static void
dm9000_poll_work(struct work_struct *w)
{
struct delayed_work *dw = container_of(w, struct delayed_work, work);
board_info_t *db = container_of(dw, board_info_t, phy_poll);
+ struct net_device *ndev = db->ndev;
+
+ if (db->flags & DM9000_PLATF_SIMPLE_PHY &&
+ !(db->flags & DM9000_PLATF_EXT_PHY)) {
+ unsigned nsr = dm9000_read_locked(db, DM9000_NSR);
+ unsigned old_carrier = netif_carrier_ok(ndev) ? 1 : 0;
+ unsigned new_carrier;
- mii_check_media(&db->mii, netif_msg_link(db), 0);
+ new_carrier = (nsr & NSR_LINKST) ? 1 : 0;
+
+ if (old_carrier != new_carrier) {
+ if (netif_msg_link(db))
+ dm9000_show_carrier(db, new_carrier, nsr);
+
+ if (!new_carrier)
+ netif_carrier_off(ndev);
+ else
+ netif_carrier_on(ndev);
+ }
+ } else
+ mii_check_media(&db->mii, netif_msg_link(db), 0);
- if (netif_running(db->ndev))
+ if (netif_running(ndev))
dm9000_schedule_poll(db);
}
@@ -492,12 +604,6 @@ dm9000_poll_work(struct work_struct *w)
static void
dm9000_release_board(struct platform_device *pdev, struct board_info *db)
{
- if (db->data_res == NULL) {
- if (db->addr_res != NULL)
- release_mem_region((unsigned long)db->io_addr, 4);
- return;
- }
-
/* unmap our resources */
iounmap(db->io_addr);
@@ -505,288 +611,73 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db)
/* release the resources */
- if (db->data_req != NULL) {
- release_resource(db->data_req);
- kfree(db->data_req);
- }
+ release_resource(db->data_req);
+ kfree(db->data_req);
- if (db->addr_req != NULL) {
- release_resource(db->addr_req);
- kfree(db->addr_req);
- }
+ release_resource(db->addr_req);
+ kfree(db->addr_req);
}
-#define res_size(_r) (((_r)->end - (_r)->start) + 1)
-
-/*
- * Search DM9000 board, allocate space and register it
- */
-static int __devinit
-dm9000_probe(struct platform_device *pdev)
+static unsigned char dm9000_type_to_char(enum dm9000_type type)
{
- struct dm9000_plat_data *pdata = pdev->dev.platform_data;
- struct board_info *db; /* Point a board information structure */
- struct net_device *ndev;
- const unsigned char *mac_src;
- unsigned long base;
- int ret = 0;
- int iosize;
- int i;
- u32 id_val;
-
- /* Init network device */
- ndev = alloc_etherdev(sizeof (struct board_info));
- if (!ndev) {
- dev_err(&pdev->dev, "could not allocate device.\n");
- return -ENOMEM;
- }
-
- SET_NETDEV_DEV(ndev, &pdev->dev);
-
- dev_dbg(&pdev->dev, "dm9000_probe()\n");
-
- /* setup board info structure */
- db = (struct board_info *) ndev->priv;
- memset(db, 0, sizeof (*db));
-
- db->dev = &pdev->dev;
- db->ndev = ndev;
-
- spin_lock_init(&db->lock);
- mutex_init(&db->addr_lock);
-
- INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
-
-
- if (pdev->num_resources < 2) {
- ret = -ENODEV;
- goto out;
- } else if (pdev->num_resources == 2) {
- base = pdev->resource[0].start;
-
- if (!request_mem_region(base, 4, ndev->name)) {
- ret = -EBUSY;
- goto out;
- }
-
- ndev->base_addr = base;
- ndev->irq = pdev->resource[1].start;
- db->io_addr = (void __iomem *)base;
- db->io_data = (void __iomem *)(base + 4);
-
- /* ensure at least we have a default set of IO routines */
- dm9000_set_io(db, 2);
-
- } else {
- db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-
- if (db->addr_res == NULL || db->data_res == NULL ||
- db->irq_res == NULL) {
- dev_err(db->dev, "insufficient resources\n");
- ret = -ENOENT;
- goto out;
- }
-
- i = res_size(db->addr_res);
- db->addr_req = request_mem_region(db->addr_res->start, i,
- pdev->name);
-
- if (db->addr_req == NULL) {
- dev_err(db->dev, "cannot claim address reg area\n");
- ret = -EIO;
- goto out;
- }
-
- db->io_addr = ioremap(db->addr_res->start, i);
-
- if (db->io_addr == NULL) {
- dev_err(db->dev, "failed to ioremap address reg\n");
- ret = -EINVAL;
- goto out;
- }
-
- iosize = res_size(db->data_res);
- db->data_req = request_mem_region(db->data_res->start, iosize,
- pdev->name);
-
- if (db->data_req == NULL) {
- dev_err(db->dev, "cannot claim data reg area\n");
- ret = -EIO;
- goto out;
- }
-
- db->io_data = ioremap(db->data_res->start, iosize);
-
- if (db->io_data == NULL) {
- dev_err(db->dev,"failed to ioremap data reg\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* fill in parameters for net-dev structure */
-
- ndev->base_addr = (unsigned long)db->io_addr;
- ndev->irq = db->irq_res->start;
-
- /* ensure at least we have a default set of IO routines */
- dm9000_set_io(db, iosize);
+ switch (type) {
+ case TYPE_DM9000E: return 'e';
+ case TYPE_DM9000A: return 'a';
+ case TYPE_DM9000B: return 'b';
}
- /* check to see if anything is being over-ridden */
- if (pdata != NULL) {
- /* check to see if the driver wants to over-ride the
- * default IO width */
-
- if (pdata->flags & DM9000_PLATF_8BITONLY)
- dm9000_set_io(db, 1);
-
- if (pdata->flags & DM9000_PLATF_16BITONLY)
- dm9000_set_io(db, 2);
-
- if (pdata->flags & DM9000_PLATF_32BITONLY)
- dm9000_set_io(db, 4);
-
- /* check to see if there are any IO routine
- * over-rides */
-
- if (pdata->inblk != NULL)
- db->inblk = pdata->inblk;
-
- if (pdata->outblk != NULL)
- db->outblk = pdata->outblk;
-
- if (pdata->dumpblk != NULL)
- db->dumpblk = pdata->dumpblk;
-
- db->flags = pdata->flags;
- }
-
- dm9000_reset(db);
-
- /* try two times, DM9000 sometimes gets the first read wrong */
- for (i = 0; i < 8; i++) {
- id_val = ior(db, DM9000_VIDL);
- id_val |= (u32)ior(db, DM9000_VIDH) << 8;
- id_val |= (u32)ior(db, DM9000_PIDL) << 16;
- id_val |= (u32)ior(db, DM9000_PIDH) << 24;
-
- if (id_val == DM9000_ID)
- break;
- dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
- }
-
- if (id_val != DM9000_ID) {
- dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
- ret = -ENODEV;
- goto out;
- }
-
- /* from this point we assume that we have found a DM9000 */
-
- /* driver system function */
- ether_setup(ndev);
-
- ndev->open = &dm9000_open;
- ndev->hard_start_xmit = &dm9000_start_xmit;
- ndev->tx_timeout = &dm9000_timeout;
- ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
- ndev->stop = &dm9000_stop;
- ndev->set_multicast_list = &dm9000_hash_table;
- ndev->ethtool_ops = &dm9000_ethtool_ops;
- ndev->do_ioctl = &dm9000_ioctl;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = &dm9000_poll_controller;
-#endif
-
- db->msg_enable = NETIF_MSG_LINK;
- db->mii.phy_id_mask = 0x1f;
- db->mii.reg_num_mask = 0x1f;
- db->mii.force_media = 0;
- db->mii.full_duplex = 0;
- db->mii.dev = ndev;
- db->mii.mdio_read = dm9000_phy_read;
- db->mii.mdio_write = dm9000_phy_write;
-
- mac_src = "eeprom";
-
- /* try reading the node address from the attached EEPROM */
- for (i = 0; i < 6; i += 2)
- dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
-
- if (!is_valid_ether_addr(ndev->dev_addr)) {
- /* try reading from mac */
-
- mac_src = "chip";
- for (i = 0; i < 6; i++)
- ndev->dev_addr[i] = ior(db, i+DM9000_PAR);
- }
-
- if (!is_valid_ether_addr(ndev->dev_addr))
- dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
- "set using ifconfig\n", ndev->name);
-
- platform_set_drvdata(pdev, ndev);
- ret = register_netdev(ndev);
-
- if (ret == 0) {
- DECLARE_MAC_BUF(mac);
- printk("%s: dm9000 at %p,%p IRQ %d MAC: %s (%s)\n",
- ndev->name, db->io_addr, db->io_data, ndev->irq,
- print_mac(mac, ndev->dev_addr), mac_src);
- }
- return 0;
-
-out:
- dev_err(db->dev, "not found (%d).\n", ret);
-
- dm9000_release_board(pdev, db);
- free_netdev(ndev);
-
- return ret;
+ return '?';
}
/*
- * Open the interface.
- * The interface is opened whenever "ifconfig" actives it.
+ * Set DM9000 multicast address
*/
-static int
-dm9000_open(struct net_device *dev)
+static void
+dm9000_hash_table(struct net_device *dev)
{
board_info_t *db = (board_info_t *) dev->priv;
- unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
+ struct dev_mc_list *mcptr = dev->mc_list;
+ int mc_cnt = dev->mc_count;
+ int i, oft;
+ u32 hash_val;
+ u16 hash_table[4];
+ u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
+ unsigned long flags;
- if (netif_msg_ifup(db))
- dev_dbg(db->dev, "enabling %s\n", dev->name);
+ dm9000_dbg(db, 1, "entering %s\n", __func__);
- /* If there is no IRQ type specified, default to something that
- * may work, and tell the user that this is a problem */
+ spin_lock_irqsave(&db->lock, flags);
- if (irqflags == IRQF_TRIGGER_NONE) {
- dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
- irqflags = DEFAULT_TRIGGER;
- }
+ for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
+ iow(db, oft, dev->dev_addr[i]);
- irqflags |= IRQF_SHARED;
+ /* Clear Hash Table */
+ for (i = 0; i < 4; i++)
+ hash_table[i] = 0x0;
- if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
- return -EAGAIN;
+ /* broadcast address */
+ hash_table[3] = 0x8000;
- /* Initialize DM9000 board */
- dm9000_reset(db);
- dm9000_init_dm9000(dev);
+ if (dev->flags & IFF_PROMISC)
+ rcr |= RCR_PRMSC;
- /* Init driver variable */
- db->dbug_cnt = 0;
+ if (dev->flags & IFF_ALLMULTI)
+ rcr |= RCR_ALL;
- mii_check_media(&db->mii, netif_msg_link(db), 1);
- netif_start_queue(dev);
-
- dm9000_schedule_poll(db);
+ /* the multicast address in Hash Table : 64 bits */
+ for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
+ hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
+ }
- return 0;
+ /* Write the hash table to MAC MD table */
+ for (i = 0, oft = DM9000_MAR; i < 4; i++) {
+ iow(db, oft++, hash_table[i]);
+ iow(db, oft++, hash_table[i] >> 8);
+ }
+
+ iow(db, DM9000_RCR, rcr);
+ spin_unlock_irqrestore(&db->lock, flags);
}
/*
@@ -795,7 +686,8 @@ dm9000_open(struct net_device *dev)
static void
dm9000_init_dm9000(struct net_device *dev)
{
- board_info_t *db = (board_info_t *) dev->priv;
+ board_info_t *db = dev->priv;
+ unsigned int imr;
dm9000_dbg(db, 1, "entering %s\n", __func__);
@@ -822,8 +714,14 @@ dm9000_init_dm9000(struct net_device *dev)
/* Set address filter table */
dm9000_hash_table(dev);
+ imr = IMR_PAR | IMR_PTM | IMR_PRM;
+ if (db->type != TYPE_DM9000E)
+ imr |= IMR_LNKCHNG;
+
+ db->imr_all = imr;
+
/* Enable TX/RX interrupt mask */
- iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+ iow(db, DM9000_IMR, imr);
/* Init Driver variable */
db->tx_pkt_cnt = 0;
@@ -831,6 +729,29 @@ dm9000_init_dm9000(struct net_device *dev)
dev->trans_start = 0;
}
+/* Our watchdog timed out. Called by the networking layer */
+static void dm9000_timeout(struct net_device *dev)
+{
+ board_info_t *db = (board_info_t *) dev->priv;
+ u8 reg_save;
+ unsigned long flags;
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+ spin_lock_irqsave(&db->lock, flags);
+
+ netif_stop_queue(dev);
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
/*
* Hardware start transmission.
* Send a packet to media from the upper layer.
@@ -839,7 +760,7 @@ static int
dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
- board_info_t *db = (board_info_t *) dev->priv;
+ board_info_t *db = dev->priv;
dm9000_dbg(db, 3, "%s:\n", __func__);
@@ -879,50 +800,12 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
-static void
-dm9000_shutdown(struct net_device *dev)
-{
- board_info_t *db = (board_info_t *) dev->priv;
-
- /* RESET device */
- dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
- iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */
- iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */
- iow(db, DM9000_RCR, 0x00); /* Disable RX */
-}
-
-/*
- * Stop the interface.
- * The interface is stopped when it is brought.
- */
-static int
-dm9000_stop(struct net_device *ndev)
-{
- board_info_t *db = (board_info_t *) ndev->priv;
-
- if (netif_msg_ifdown(db))
- dev_dbg(db->dev, "shutting down %s\n", ndev->name);
-
- cancel_delayed_work_sync(&db->phy_poll);
-
- netif_stop_queue(ndev);
- netif_carrier_off(ndev);
-
- /* free interrupt */
- free_irq(ndev->irq, ndev);
-
- dm9000_shutdown(ndev);
-
- return 0;
-}
-
/*
* DM9000 interrupt handler
* receive the packet to upper layer, free the transmitted packet
*/
-static void
-dm9000_tx_done(struct net_device *dev, board_info_t * db)
+static void dm9000_tx_done(struct net_device *dev, board_info_t *db)
{
int tx_status = ior(db, DM9000_NSR); /* Got TX status */
@@ -945,52 +828,6 @@ dm9000_tx_done(struct net_device *dev, board_info_t * db)
}
}
-static irqreturn_t
-dm9000_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- board_info_t *db = (board_info_t *) dev->priv;
- int int_status;
- u8 reg_save;
-
- dm9000_dbg(db, 3, "entering %s\n", __func__);
-
- /* A real interrupt coming */
-
- spin_lock(&db->lock);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Disable all interrupts */
- iow(db, DM9000_IMR, IMR_PAR);
-
- /* Got DM9000 interrupt status */
- int_status = ior(db, DM9000_ISR); /* Got ISR */
- iow(db, DM9000_ISR, int_status); /* Clear ISR status */
-
- if (netif_msg_intr(db))
- dev_dbg(db->dev, "interrupt status %02x\n", int_status);
-
- /* Received the coming packet */
- if (int_status & ISR_PRS)
- dm9000_rx(dev);
-
- /* Trnasmit Interrupt check */
- if (int_status & ISR_PTS)
- dm9000_tx_done(dev, db);
-
- /* Re-enable interrupt mask */
- iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
-
- /* Restore previous register address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock(&db->lock);
-
- return IRQ_HANDLED;
-}
-
struct dm9000_rxhdr {
u8 RxPktReady;
u8 RxStatus;
@@ -1094,173 +931,109 @@ dm9000_rx(struct net_device *dev)
} while (rxbyte == DM9000_PKT_RDY);
}
-static unsigned int
-dm9000_read_locked(board_info_t *db, int reg)
+static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
{
- unsigned long flags;
- unsigned int ret;
+ struct net_device *dev = dev_id;
+ board_info_t *db = dev->priv;
+ int int_status;
+ u8 reg_save;
- spin_lock_irqsave(&db->lock, flags);
- ret = ior(db, reg);
- spin_unlock_irqrestore(&db->lock, flags);
+ dm9000_dbg(db, 3, "entering %s\n", __func__);
- return ret;
-}
+ /* A real interrupt coming */
-static int dm9000_wait_eeprom(board_info_t *db)
-{
- unsigned int status;
- int timeout = 8; /* wait max 8msec */
+ spin_lock(&db->lock);
- /* The DM9000 data sheets say we should be able to
- * poll the ERRE bit in EPCR to wait for the EEPROM
- * operation. From testing several chips, this bit
- * does not seem to work.
- *
- * We attempt to use the bit, but fall back to the
- * timeout (which is why we do not return an error
- * on expiry) to say that the EEPROM operation has
- * completed.
- */
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
- while (1) {
- status = dm9000_read_locked(db, DM9000_EPCR);
+ /* Disable all interrupts */
+ iow(db, DM9000_IMR, IMR_PAR);
- if ((status & EPCR_ERRE) == 0)
- break;
+ /* Got DM9000 interrupt status */
+ int_status = ior(db, DM9000_ISR); /* Got ISR */
+ iow(db, DM9000_ISR, int_status); /* Clear ISR status */
- if (timeout-- < 0) {
- dev_dbg(db->dev, "timeout waiting EEPROM\n");
- break;
- }
- }
+ if (netif_msg_intr(db))
+ dev_dbg(db->dev, "interrupt status %02x\n", int_status);
- return 0;
-}
+ /* Received the coming packet */
+ if (int_status & ISR_PRS)
+ dm9000_rx(dev);
-/*
- * Read a word data from EEPROM
- */
-static void
-dm9000_read_eeprom(board_info_t *db, int offset, u8 *to)
-{
- unsigned long flags;
+ /* Trnasmit Interrupt check */
+ if (int_status & ISR_PTS)
+ dm9000_tx_done(dev, db);
- if (db->flags & DM9000_PLATF_NO_EEPROM) {
- to[0] = 0xff;
- to[1] = 0xff;
- return;
+ if (db->type != TYPE_DM9000E) {
+ if (int_status & ISR_LNKCHNG) {
+ /* fire a link-change request */
+ schedule_delayed_work(&db->phy_poll, 1);
+ }
}
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock, flags);
-
- iow(db, DM9000_EPAR, offset);
- iow(db, DM9000_EPCR, EPCR_ERPRR);
-
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_wait_eeprom(db);
-
- /* delay for at-least 150uS */
- msleep(1);
-
- spin_lock_irqsave(&db->lock, flags);
-
- iow(db, DM9000_EPCR, 0x0);
+ /* Re-enable interrupt mask */
+ iow(db, DM9000_IMR, db->imr_all);
- to[0] = ior(db, DM9000_EPDRL);
- to[1] = ior(db, DM9000_EPDRH);
+ /* Restore previous register address */
+ writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock, flags);
+ spin_unlock(&db->lock);
- mutex_unlock(&db->addr_lock);
+ return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
/*
- * Write a word data to SROM
+ *Used by netconsole
*/
-static void
-dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
+static void dm9000_poll_controller(struct net_device *dev)
{
- unsigned long flags;
-
- if (db->flags & DM9000_PLATF_NO_EEPROM)
- return;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock, flags);
- iow(db, DM9000_EPAR, offset);
- iow(db, DM9000_EPDRH, data[1]);
- iow(db, DM9000_EPDRL, data[0]);
- iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_wait_eeprom(db);
-
- mdelay(1); /* wait at least 150uS to clear */
-
- spin_lock_irqsave(&db->lock, flags);
- iow(db, DM9000_EPCR, 0);
- spin_unlock_irqrestore(&db->lock, flags);
-
- mutex_unlock(&db->addr_lock);
+ disable_irq(dev->irq);
+ dm9000_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
}
+#endif
/*
- * Set DM9000 multicast address
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" actives it.
*/
-static void
-dm9000_hash_table(struct net_device *dev)
+static int
+dm9000_open(struct net_device *dev)
{
- board_info_t *db = (board_info_t *) dev->priv;
- struct dev_mc_list *mcptr = dev->mc_list;
- int mc_cnt = dev->mc_count;
- int i, oft;
- u32 hash_val;
- u16 hash_table[4];
- u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
- unsigned long flags;
-
- dm9000_dbg(db, 1, "entering %s\n", __func__);
+ board_info_t *db = dev->priv;
+ unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
- spin_lock_irqsave(&db->lock, flags);
+ if (netif_msg_ifup(db))
+ dev_dbg(db->dev, "enabling %s\n", dev->name);
- for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
- iow(db, oft, dev->dev_addr[i]);
+ /* If there is no IRQ type specified, default to something that
+ * may work, and tell the user that this is a problem */
- /* Clear Hash Table */
- for (i = 0; i < 4; i++)
- hash_table[i] = 0x0;
+ if (irqflags == IRQF_TRIGGER_NONE)
+ dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
- /* broadcast address */
- hash_table[3] = 0x8000;
+ irqflags |= IRQF_SHARED;
- if (dev->flags & IFF_PROMISC)
- rcr |= RCR_PRMSC;
+ if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
+ return -EAGAIN;
- if (dev->flags & IFF_ALLMULTI)
- rcr |= RCR_ALL;
+ /* Initialize DM9000 board */
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
- /* the multicast address in Hash Table : 64 bits */
- for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
- hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
- hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
- }
+ /* Init driver variable */
+ db->dbug_cnt = 0;
- /* Write the hash table to MAC MD table */
- for (i = 0, oft = DM9000_MAR; i < 4; i++) {
- iow(db, oft++, hash_table[i]);
- iow(db, oft++, hash_table[i] >> 8);
- }
+ mii_check_media(&db->mii, netif_msg_link(db), 1);
+ netif_start_queue(dev);
+
+ dm9000_schedule_poll(db);
- iow(db, DM9000_RCR, rcr);
- spin_unlock_irqrestore(&db->lock, flags);
+ return 0;
}
-
/*
* Sleep, either by using msleep() or if we are suspending, then
* use mdelay() to sleep.
@@ -1323,7 +1096,8 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
* Write a word to phyxcer
*/
static void
-dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
+dm9000_phy_write(struct net_device *dev,
+ int phyaddr_unused, int reg, int value)
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
@@ -1363,6 +1137,273 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
mutex_unlock(&db->addr_lock);
}
+static void
+dm9000_shutdown(struct net_device *dev)
+{
+ board_info_t *db = dev->priv;
+
+ /* RESET device */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */
+ iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */
+ iow(db, DM9000_RCR, 0x00); /* Disable RX */
+}
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+static int
+dm9000_stop(struct net_device *ndev)
+{
+ board_info_t *db = ndev->priv;
+
+ if (netif_msg_ifdown(db))
+ dev_dbg(db->dev, "shutting down %s\n", ndev->name);
+
+ cancel_delayed_work_sync(&db->phy_poll);
+
+ netif_stop_queue(ndev);
+ netif_carrier_off(ndev);
+
+ /* free interrupt */
+ free_irq(ndev->irq, ndev);
+
+ dm9000_shutdown(ndev);
+
+ return 0;
+}
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+/*
+ * Search DM9000 board, allocate space and register it
+ */
+static int __devinit
+dm9000_probe(struct platform_device *pdev)
+{
+ struct dm9000_plat_data *pdata = pdev->dev.platform_data;
+ struct board_info *db; /* Point a board information structure */
+ struct net_device *ndev;
+ const unsigned char *mac_src;
+ int ret = 0;
+ int iosize;
+ int i;
+ u32 id_val;
+
+ /* Init network device */
+ ndev = alloc_etherdev(sizeof(struct board_info));
+ if (!ndev) {
+ dev_err(&pdev->dev, "could not allocate device.\n");
+ return -ENOMEM;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ dev_dbg(&pdev->dev, "dm9000_probe()\n");
+
+ /* setup board info structure */
+ db = ndev->priv;
+ memset(db, 0, sizeof(*db));
+
+ db->dev = &pdev->dev;
+ db->ndev = ndev;
+
+ spin_lock_init(&db->lock);
+ mutex_init(&db->addr_lock);
+
+ INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
+
+ db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (db->addr_res == NULL || db->data_res == NULL ||
+ db->irq_res == NULL) {
+ dev_err(db->dev, "insufficient resources\n");
+ ret = -ENOENT;
+ goto out;
+ }
+
+ iosize = res_size(db->addr_res);
+ db->addr_req = request_mem_region(db->addr_res->start, iosize,
+ pdev->name);
+
+ if (db->addr_req == NULL) {
+ dev_err(db->dev, "cannot claim address reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_addr = ioremap(db->addr_res->start, iosize);
+
+ if (db->io_addr == NULL) {
+ dev_err(db->dev, "failed to ioremap address reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ iosize = res_size(db->data_res);
+ db->data_req = request_mem_region(db->data_res->start, iosize,
+ pdev->name);
+
+ if (db->data_req == NULL) {
+ dev_err(db->dev, "cannot claim data reg area\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ db->io_data = ioremap(db->data_res->start, iosize);
+
+ if (db->io_data == NULL) {
+ dev_err(db->dev, "failed to ioremap data reg\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* fill in parameters for net-dev structure */
+ ndev->base_addr = (unsigned long)db->io_addr;
+ ndev->irq = db->irq_res->start;
+
+ /* ensure at least we have a default set of IO routines */
+ dm9000_set_io(db, iosize);
+
+ /* check to see if anything is being over-ridden */
+ if (pdata != NULL) {
+ /* check to see if the driver wants to over-ride the
+ * default IO width */
+
+ if (pdata->flags & DM9000_PLATF_8BITONLY)
+ dm9000_set_io(db, 1);
+
+ if (pdata->flags & DM9000_PLATF_16BITONLY)
+ dm9000_set_io(db, 2);
+
+ if (pdata->flags & DM9000_PLATF_32BITONLY)
+ dm9000_set_io(db, 4);
+
+ /* check to see if there are any IO routine
+ * over-rides */
+
+ if (pdata->inblk != NULL)
+ db->inblk = pdata->inblk;
+
+ if (pdata->outblk != NULL)
+ db->outblk = pdata->outblk;
+
+ if (pdata->dumpblk != NULL)
+ db->dumpblk = pdata->dumpblk;
+
+ db->flags = pdata->flags;
+ }
+
+#ifdef CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL
+ db->flags |= DM9000_PLATF_SIMPLE_PHY;
+#endif
+
+ dm9000_reset(db);
+
+ /* try multiple times, DM9000 sometimes gets the read wrong */
+ for (i = 0; i < 8; i++) {
+ id_val = ior(db, DM9000_VIDL);
+ id_val |= (u32)ior(db, DM9000_VIDH) << 8;
+ id_val |= (u32)ior(db, DM9000_PIDL) << 16;
+ id_val |= (u32)ior(db, DM9000_PIDH) << 24;
+
+ if (id_val == DM9000_ID)
+ break;
+ dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
+ }
+
+ if (id_val != DM9000_ID) {
+ dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Identify what type of DM9000 we are working on */
+
+ id_val = ior(db, DM9000_CHIPR);
+ dev_dbg(db->dev, "dm9000 revision 0x%02x\n", id_val);
+
+ switch (id_val) {
+ case CHIPR_DM9000A:
+ db->type = TYPE_DM9000A;
+ break;
+ case CHIPR_DM9000B:
+ db->type = TYPE_DM9000B;
+ break;
+ default:
+ dev_dbg(db->dev, "ID %02x => defaulting to DM9000E\n", id_val);
+ db->type = TYPE_DM9000E;
+ }
+
+ /* from this point we assume that we have found a DM9000 */
+
+ /* driver system function */
+ ether_setup(ndev);
+
+ ndev->open = &dm9000_open;
+ ndev->hard_start_xmit = &dm9000_start_xmit;
+ ndev->tx_timeout = &dm9000_timeout;
+ ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ ndev->stop = &dm9000_stop;
+ ndev->set_multicast_list = &dm9000_hash_table;
+ ndev->ethtool_ops = &dm9000_ethtool_ops;
+ ndev->do_ioctl = &dm9000_ioctl;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ ndev->poll_controller = &dm9000_poll_controller;
+#endif
+
+ db->msg_enable = NETIF_MSG_LINK;
+ db->mii.phy_id_mask = 0x1f;
+ db->mii.reg_num_mask = 0x1f;
+ db->mii.force_media = 0;
+ db->mii.full_duplex = 0;
+ db->mii.dev = ndev;
+ db->mii.mdio_read = dm9000_phy_read;
+ db->mii.mdio_write = dm9000_phy_write;
+
+ mac_src = "eeprom";
+
+ /* try reading the node address from the attached EEPROM */
+ for (i = 0; i < 6; i += 2)
+ dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
+
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ /* try reading from mac */
+
+ mac_src = "chip";
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = ior(db, i+DM9000_PAR);
+ }
+
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
+ "set using ifconfig\n", ndev->name);
+
+ platform_set_drvdata(pdev, ndev);
+ ret = register_netdev(ndev);
+
+ if (ret == 0) {
+ DECLARE_MAC_BUF(mac);
+ printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %s (%s)\n",
+ ndev->name, dm9000_type_to_char(db->type),
+ db->io_addr, db->io_data, ndev->irq,
+ print_mac(mac, ndev->dev_addr), mac_src);
+ }
+ return 0;
+
+out:
+ dev_err(db->dev, "not found (%d).\n", ret);
+
+ dm9000_release_board(pdev, db);
+ free_netdev(ndev);
+
+ return ret;
+}
+
static int
dm9000_drv_suspend(struct platform_device *dev, pm_message_t state)
{
@@ -1432,7 +1473,7 @@ dm9000_init(void)
{
printk(KERN_INFO "%s Ethernet Driver, V%s\n", CARDNAME, DRV_VERSION);
- return platform_driver_register(&dm9000_driver); /* search board and register */
+ return platform_driver_register(&dm9000_driver);
}
static void __exit
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
index 82cad36..ba25cf5 100644
--- a/drivers/net/dm9000.h
+++ b/drivers/net/dm9000.h
@@ -45,6 +45,9 @@
#define DM9000_CHIPR 0x2C
#define DM9000_SMCR 0x2F
+#define CHIPR_DM9000A 0x19
+#define CHIPR_DM9000B 0x1B
+
#define DM9000_MRCMDX 0xF0
#define DM9000_MRCMD 0xF2
#define DM9000_MRRL 0xF4
@@ -131,5 +134,13 @@
#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */
#define DM9000_PKT_MAX 1536 /* Received packet max size */
+/* DM9000A / DM9000B definitions */
+
+#define IMR_LNKCHNG (1<<5)
+#define IMR_UNDERRUN (1<<4)
+
+#define ISR_LNKCHNG (1<<5)
+#define ISR_UNDERRUN (1<<4)
+
#endif /* _DM9000X_H_ */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 59579b1..311ca26 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -47,12 +47,6 @@ static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation
* Macro expands to...
* {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
*/
-#ifdef CONFIG_E1000E_ENABLED
- #define PCIE(x)
-#else
- #define PCIE(x) x,
-#endif
-
static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1000),
INTEL_E1000_ETHERNET_DEVICE(0x1001),
@@ -79,14 +73,6 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1049))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104A))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104B))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104C))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104D))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x105E))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x105F))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1060))
INTEL_E1000_ETHERNET_DEVICE(0x1075),
INTEL_E1000_ETHERNET_DEVICE(0x1076),
INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -95,28 +81,9 @@ PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1060))
INTEL_E1000_ETHERNET_DEVICE(0x107A),
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107D))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107E))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107F))
INTEL_E1000_ETHERNET_DEVICE(0x108A),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x108B))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x108C))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1096))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1098))
INTEL_E1000_ETHERNET_DEVICE(0x1099),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x109A))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10A4))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10A5))
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10B9))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BA))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BB))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BC))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10C4))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10C5))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10D5))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10D9))
-PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10DA))
/* required last entry */
{0,}
};
@@ -5284,7 +5251,6 @@ e1000_netpoll(struct net_device *netdev)
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev);
- e1000_clean_tx_irq(adapter, adapter->tx_ring);
#ifndef CONFIG_E1000_NAPI
adapter->clean_rx(adapter, adapter->rx_ring);
#endif
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index d3bc6f8..4a4f62e 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -283,6 +283,10 @@ struct e1000_adapter {
unsigned long led_status;
unsigned int flags;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
};
struct e1000_info {
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ccb8ca2..22f2fc9 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4002,7 +4002,11 @@ static int e1000_resume(struct pci_dev *pdev)
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
e1000e_disable_l1aspm(pdev);
- err = pci_enable_device(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot enable PCI device from suspend\n");
@@ -4103,9 +4107,14 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ int err;
e1000e_disable_l1aspm(pdev);
- if (pci_enable_device(pdev)) {
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
@@ -4184,6 +4193,21 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
}
/**
+ * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Returns true if an adapters needs ioport resources
+ **/
+static int e1000e_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ /* Currently there are no adapters that need ioport resources */
+ default:
+ return false;
+ }
+}
+
+/**
* e1000_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in e1000_pci_tbl
@@ -4208,9 +4232,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
e1000e_disable_l1aspm(pdev);
- err = pci_enable_device(pdev);
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000e_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
if (err)
return err;
@@ -4233,7 +4267,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
}
- err = pci_request_regions(pdev, e1000e_driver_name);
+ err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -4258,6 +4292,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
@@ -4497,7 +4533,7 @@ err_sw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, bars);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -4545,7 +4581,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, adapter->bars);
free_netdev(netdev);
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 7bb9c72..3c1364d 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -90,6 +90,7 @@ static int full_duplex[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/io.h>
#include <asm/uaccess.h>
+#include <asm/byteorder.h>
/* These identify the driver base version and may not be removed. */
static char version[] =
@@ -861,40 +862,20 @@ static int netdev_open(struct net_device *dev)
Wait the specified 50 PCI cycles after a reset by initializing
Tx and Rx queues and the address filter list.
FIXME (Ueimor): optimistic for alpha + posted writes ? */
-#if defined(__powerpc__) || defined(__sparc__)
-// 89/9/1 modify,
-// np->bcrvalue=0x04 | 0x0x38; /* big-endian, 256 burst length */
- np->bcrvalue = 0x04 | 0x10; /* big-endian, tx 8 burst length */
- np->crvalue = 0xe00; /* rx 128 burst length */
-#elif defined(__alpha__) || defined(__x86_64__)
-// 89/9/1 modify,
-// np->bcrvalue=0x38; /* little-endian, 256 burst length */
- np->bcrvalue = 0x10; /* little-endian, 8 burst length */
- np->crvalue = 0xe00; /* rx 128 burst length */
-#elif defined(__i386__)
-#if defined(MODULE)
-// 89/9/1 modify,
-// np->bcrvalue=0x38; /* little-endian, 256 burst length */
+
np->bcrvalue = 0x10; /* little-endian, 8 burst length */
- np->crvalue = 0xe00; /* rx 128 burst length */
-#else
- /* When not a module we can work around broken '486 PCI boards. */
-#define x86 boot_cpu_data.x86
-// 89/9/1 modify,
-// np->bcrvalue=(x86 <= 4 ? 0x10 : 0x38);
- np->bcrvalue = 0x10;
- np->crvalue = (x86 <= 4 ? 0xa00 : 0xe00);
- if (x86 <= 4)
- printk(KERN_INFO "%s: This is a 386/486 PCI system, setting burst "
- "length to %x.\n", dev->name, (x86 <= 4 ? 0x10 : 0x38));
+#ifdef __BIG_ENDIAN
+ np->bcrvalue |= 0x04; /* big-endian */
#endif
-#else
-// 89/9/1 modify,
-// np->bcrvalue=0x38;
- np->bcrvalue = 0x10;
- np->crvalue = 0xe00; /* rx 128 burst length */
-#warning Processor architecture undefined!
+
+#if defined(__i386__) && !defined(MODULE)
+ if (boot_cpu_data.x86 <= 4)
+ np->crvalue = 0xa00;
+ else
#endif
+ np->crvalue = 0xe00; /* rx 128 burst length */
+
+
// 89/12/29 add,
// 90/1/16 modify,
// np->imrvalue=FBE|TUNF|CNTOVF|RBU|TI|RI;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index c980ce9..afd063f 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5559,6 +5559,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
/* set mac address */
nv_copy_mac_to_hw(dev);
+ /* Workaround current PCI init glitch: wakeup bits aren't
+ * being set from PCI PM capability.
+ */
+ device_init_wakeup(&pci_dev->dev, 1);
+
/* disable WOL */
writel(0, base + NvRegWakeUpFlags);
np->wolenabled = 0;
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 6b2e7d3..0eecb8b 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -271,6 +271,10 @@ struct igb_adapter {
unsigned int msi_enabled;
u32 eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
};
enum e1000_state_t {
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 7b6b780..e13b8db 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -820,6 +820,21 @@ void igb_reset(struct igb_adapter *adapter)
}
/**
+ * igb_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Returns true if an adapter needs ioport resources
+ **/
+static int igb_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ /* Currently there are no adapters that need ioport resources */
+ default:
+ return false;
+ }
+}
+
+/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in igb_pci_tbl
@@ -843,8 +858,17 @@ static int __devinit igb_probe(struct pci_dev *pdev,
u16 eeprom_data = 0;
u16 eeprom_apme_mask = IGB_EEPROM_APME;
u32 part_num;
+ int bars, need_ioport;
- err = pci_enable_device(pdev);
+ /* do not allocate ioport bars when not needed */
+ need_ioport = igb_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
if (err)
return err;
@@ -866,7 +890,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
}
}
- err = pci_request_regions(pdev, igb_driver_name);
+ err = pci_request_selected_regions(pdev, bars, igb_driver_name);
if (err)
goto err_pci_reg;
@@ -887,6 +911,8 @@ static int __devinit igb_probe(struct pci_dev *pdev,
hw = &adapter->hw;
hw->back = adapter;
adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
@@ -1127,7 +1153,7 @@ err_hw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, bars);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -1174,7 +1200,7 @@ static void __devexit igb_remove(struct pci_dev *pdev)
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, adapter->bars);
free_netdev(netdev);
@@ -3975,7 +4001,11 @@ static int igb_resume(struct pci_dev *pdev)
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- err = pci_enable_device(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"igb: Cannot enable PCI device from suspend\n");
@@ -4078,8 +4108,13 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ int err;
- if (pci_enable_device(pdev)) {
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index d981134..956914a 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -32,6 +32,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
+#include <linux/inet_lro.h>
#include "ixgbe_type.h"
#include "ixgbe_common.h"
@@ -100,6 +101,9 @@
#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
+#define IXGBE_MAX_LRO_DESCRIPTORS 8
+#define IXGBE_MAX_LRO_AGGREGATE 32
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
@@ -150,6 +154,8 @@ struct ixgbe_ring {
/* cpu for tx queue */
int cpu;
#endif
+ struct net_lro_mgr lro_mgr;
+ bool lro_used;
struct ixgbe_queue_stats stats;
u8 v_idx; /* maps directly to the index for this ring in the hardware
* vector array, can also be used for finding the bit in EICR
@@ -287,6 +293,9 @@ struct ixgbe_adapter {
unsigned long state;
u64 tx_busy;
+ u64 lro_aggregated;
+ u64 lro_flushed;
+ u64 lro_no_desc;
};
enum ixbge_state_t {
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 4e46377..12990b1 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -90,6 +90,8 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
{"rx_header_split", IXGBE_STAT(rx_hdr_split)},
{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
+ {"lro_aggregated", IXGBE_STAT(lro_aggregated)},
+ {"lro_flushed", IXGBE_STAT(lro_flushed)},
};
#define IXGBE_QUEUE_STATS_LEN \
@@ -787,6 +789,7 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64);
int j, k;
int i;
+ u64 aggregated = 0, flushed = 0, no_desc = 0;
ixgbe_update_stats(adapter);
for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
@@ -801,11 +804,17 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
i += k;
}
for (j = 0; j < adapter->num_rx_queues; j++) {
+ aggregated += adapter->rx_ring[j].lro_mgr.stats.aggregated;
+ flushed += adapter->rx_ring[j].lro_mgr.stats.flushed;
+ no_desc += adapter->rx_ring[j].lro_mgr.stats.no_desc;
queue_stat = (u64 *)&adapter->rx_ring[j].stats;
for (k = 0; k < stat_count; k++)
data[i + k] = queue_stat[k];
i += k;
}
+ adapter->lro_aggregated = aggregated;
+ adapter->lro_flushed = flushed;
+ adapter->lro_no_desc = no_desc;
}
static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
@@ -973,6 +982,8 @@ static struct ethtool_ops ixgbe_ethtool_ops = {
.get_ethtool_stats = ixgbe_get_ethtool_stats,
.get_coalesce = ixgbe_get_coalesce,
.set_coalesce = ixgbe_set_coalesce,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = ethtool_op_set_flags,
};
void ixgbe_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 0d37c90..f429c9a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -389,24 +389,39 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
* ixgbe_receive_skb - Send a completed packet up the stack
* @adapter: board private structure
* @skb: packet to send up
- * @is_vlan: packet has a VLAN tag
- * @tag: VLAN tag from descriptor
+ * @status: hardware indication of status of receive
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ * @rx_desc: rx descriptor
**/
static void ixgbe_receive_skb(struct ixgbe_adapter *adapter,
- struct sk_buff *skb, bool is_vlan,
- u16 tag)
+ struct sk_buff *skb, u8 status,
+ struct ixgbe_ring *ring,
+ union ixgbe_adv_rx_desc *rx_desc)
{
- if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
- if (adapter->vlgrp && is_vlan)
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp, tag);
- else
- netif_receive_skb(skb);
- } else {
+ bool is_vlan = (status & IXGBE_RXD_STAT_VP);
+ u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
+ if (adapter->netdev->features & NETIF_F_LRO &&
+ skb->ip_summed == CHECKSUM_UNNECESSARY) {
if (adapter->vlgrp && is_vlan)
- vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
+ lro_vlan_hwaccel_receive_skb(&ring->lro_mgr, skb,
+ adapter->vlgrp, tag,
+ rx_desc);
else
- netif_rx(skb);
+ lro_receive_skb(&ring->lro_mgr, skb, rx_desc);
+ ring->lro_used = true;
+ } else {
+ if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
+ if (adapter->vlgrp && is_vlan)
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp, tag);
+ else
+ netif_receive_skb(skb);
+ } else {
+ if (adapter->vlgrp && is_vlan)
+ vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
+ else
+ netif_rx(skb);
+ }
}
}
@@ -546,8 +561,8 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter,
struct sk_buff *skb;
unsigned int i;
u32 upper_len, len, staterr;
- u16 hdr_info, vlan_tag;
- bool is_vlan, cleaned = false;
+ u16 hdr_info;
+ bool cleaned = false;
int cleaned_count = 0;
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
@@ -556,8 +571,6 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter,
rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
rx_buffer_info = &rx_ring->rx_buffer_info[i];
- is_vlan = (staterr & IXGBE_RXD_STAT_VP);
- vlan_tag = le16_to_cpu(rx_desc->wb.upper.vlan);
while (staterr & IXGBE_RXD_STAT_DD) {
if (*work_done >= work_to_do)
@@ -635,7 +648,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter,
total_rx_packets++;
skb->protocol = eth_type_trans(skb, netdev);
- ixgbe_receive_skb(adapter, skb, is_vlan, vlan_tag);
+ ixgbe_receive_skb(adapter, skb, staterr, rx_ring, rx_desc);
netdev->last_rx = jiffies;
next_desc:
@@ -652,8 +665,11 @@ next_desc:
rx_buffer_info = next_buffer;
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- is_vlan = (staterr & IXGBE_RXD_STAT_VP);
- vlan_tag = le16_to_cpu(rx_desc->wb.upper.vlan);
+ }
+
+ if (rx_ring->lro_used) {
+ lro_flush_all(&rx_ring->lro_mgr);
+ rx_ring->lro_used = false;
}
rx_ring->next_to_clean = i;
@@ -1382,6 +1398,33 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
/**
+ * ixgbe_get_skb_hdr - helper function for LRO header processing
+ * @skb: pointer to sk_buff to be added to LRO packet
+ * @iphdr: pointer to tcp header structure
+ * @tcph: pointer to tcp header structure
+ * @hdr_flags: pointer to header flags
+ * @priv: private data
+ **/
+static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph,
+ u64 *hdr_flags, void *priv)
+{
+ union ixgbe_adv_rx_desc *rx_desc = priv;
+
+ /* Verify that this is a valid IPv4 TCP packet */
+ if (!(rx_desc->wb.lower.lo_dword.pkt_info &
+ (IXGBE_RXDADV_PKTTYPE_IPV4 | IXGBE_RXDADV_PKTTYPE_TCP)))
+ return -1;
+
+ /* Set network headers */
+ skb_reset_network_header(skb);
+ skb_set_transport_header(skb, ip_hdrlen(skb));
+ *iphdr = ip_hdr(skb);
+ *tcph = tcp_hdr(skb);
+ *hdr_flags = LRO_IPV4 | LRO_TCP;
+ return 0;
+}
+
+/**
* ixgbe_configure_rx - Configure 8254x Receive Unit after Reset
* @adapter: board private structure
*
@@ -1470,6 +1513,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
adapter->rx_ring[i].tail = IXGBE_RDT(i);
}
+ /* Intitial LRO Settings */
+ adapter->rx_ring[i].lro_mgr.max_aggr = IXGBE_MAX_LRO_AGGREGATE;
+ adapter->rx_ring[i].lro_mgr.max_desc = IXGBE_MAX_LRO_DESCRIPTORS;
+ adapter->rx_ring[i].lro_mgr.get_skb_header = ixgbe_get_skb_hdr;
+ adapter->rx_ring[i].lro_mgr.features = LRO_F_EXTRACT_VLAN_ID;
+ if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
+ adapter->rx_ring[i].lro_mgr.features |= LRO_F_NAPI;
+ adapter->rx_ring[i].lro_mgr.dev = adapter->netdev;
+ adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY;
+ adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
+
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
/* Fill out redirection table */
for (i = 0, j = 0; i < 128; i++, j++) {
@@ -2489,12 +2543,18 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
struct pci_dev *pdev = adapter->pdev;
int size;
+ size = sizeof(struct net_lro_desc) * IXGBE_MAX_LRO_DESCRIPTORS;
+ rxdr->lro_mgr.lro_arr = vmalloc(size);
+ if (!rxdr->lro_mgr.lro_arr)
+ return -ENOMEM;
+ memset(rxdr->lro_mgr.lro_arr, 0, size);
+
size = sizeof(struct ixgbe_rx_buffer) * rxdr->count;
rxdr->rx_buffer_info = vmalloc(size);
if (!rxdr->rx_buffer_info) {
DPRINTK(PROBE, ERR,
"vmalloc allocation failed for the rx desc ring\n");
- return -ENOMEM;
+ goto alloc_failed;
}
memset(rxdr->rx_buffer_info, 0, size);
@@ -2508,13 +2568,18 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
DPRINTK(PROBE, ERR,
"Memory allocation failed for the rx desc ring\n");
vfree(rxdr->rx_buffer_info);
- return -ENOMEM;
+ goto alloc_failed;
}
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
return 0;
+
+alloc_failed:
+ vfree(rxdr->lro_mgr.lro_arr);
+ rxdr->lro_mgr.lro_arr = NULL;
+ return -ENOMEM;
}
/**
@@ -2565,6 +2630,9 @@ static void ixgbe_free_rx_resources(struct ixgbe_adapter *adapter,
{
struct pci_dev *pdev = adapter->pdev;
+ vfree(rx_ring->lro_mgr.lro_arr);
+ rx_ring->lro_mgr.lro_arr = NULL;
+
ixgbe_clean_rx_ring(adapter, rx_ring);
vfree(rx_ring->rx_buffer_info);
@@ -3517,6 +3585,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER;
+ netdev->features |= NETIF_F_LRO;
netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_TSO6;
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index fffc49b..53451c3 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1739,7 +1739,6 @@ static int netdrv_close (struct net_device *dev)
spin_unlock_irqrestore (&tp->lock, flags);
- synchronize_irq (dev->irq);
free_irq (dev->irq, dev);
netdrv_tx_clear (dev);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index f64d987..37f3116 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -322,7 +322,7 @@ static int sh_eth_dev_init(struct net_device *ndev)
ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR);
ctrl_outl(0, ioaddr + TFTR);
- ctrl_outl(RMCR_RST, ioaddr + RMCR);
+ ctrl_outl(0, ioaddr + RMCR);
rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
@@ -994,7 +994,7 @@ static int sh_mdio_init(struct net_device *ndev, int id)
/* Hook up MII support for ethtool */
mdp->mii_bus->name = "sh_mii";
mdp->mii_bus->dev = &ndev->dev;
- mdp->mii_bus->id = id;
+ mdp->mii_bus->id[0] = id;
/* PHY IRQ */
mdp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index ca2db6b..e01e1c3 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -40,8 +40,6 @@
#define PKT_BUF_SZ 1538
/* Chip Base Address */
-#define SH_ETH0_BASE 0xA7000000
-#define SH_ETH1_BASE 0xA7000400
#define SH_TSU_ADDR 0xA7000804
/* Chip Registers */
@@ -462,3 +460,5 @@ static void swaps(char *src, int len)
*p = swab32(*p);
#endif
}
+
+#endif
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index febfaee..43fde99 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1437,7 +1437,6 @@ static int tsi108_close(struct net_device *dev)
dev_kfree_skb(skb);
}
- synchronize_irq(data->irq_num);
free_irq(data->irq_num, dev);
/* Discard the RX ring. */
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 6c400cc..1210fb3 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/21142.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,9 +8,8 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
-
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
#include <linux/delay.h>
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 1b5edd6..9281d06 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -124,8 +124,6 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copi
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (6*HZ)
-#define DE_UNALIGNED_16(a) (u16)(get_unaligned((u16 *)(a)))
-
/* This is a mysterious value that can be written to CSR11 in the 21040 (only)
to support a pre-NWay full-duplex signaling mechanism using short frames.
No one knows what it should be, but if left at its default value some
@@ -1811,7 +1809,7 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
goto bad_srom;
/* get default media type */
- switch (DE_UNALIGNED_16(&il->default_media)) {
+ switch (get_unaligned(&il->default_media)) {
case 0x0001: de->media_type = DE_MEDIA_BNC; break;
case 0x0002: de->media_type = DE_MEDIA_AUI; break;
case 0x0204: de->media_type = DE_MEDIA_TP_FD; break;
@@ -1875,9 +1873,9 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
bufp += sizeof (ib->opts);
if (ib->opts & MediaCustomCSRs) {
- de->media[idx].csr13 = DE_UNALIGNED_16(&ib->csr13);
- de->media[idx].csr14 = DE_UNALIGNED_16(&ib->csr14);
- de->media[idx].csr15 = DE_UNALIGNED_16(&ib->csr15);
+ de->media[idx].csr13 = get_unaligned(&ib->csr13);
+ de->media[idx].csr14 = get_unaligned(&ib->csr14);
+ de->media[idx].csr15 = get_unaligned(&ib->csr15);
bufp += sizeof(ib->csr13) + sizeof(ib->csr14) +
sizeof(ib->csr15);
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index da2206f..0dcced1 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/eeprom.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,9 +8,8 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
-
+ for more information on this driver.
+ Please submit bug reports to http://bugzilla.kernel.org/.
*/
#include <linux/pci.h>
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 6284afd..c6bad98 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/interrupt.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,8 +8,8 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index b562566..91cf9c8 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/media.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,9 +8,9 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
#include <linux/kernel.h>
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index be82a2e..d3253ed 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/pnic.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,9 +8,9 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
#include <linux/kernel.h>
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 4e4a879..f495791 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/pnic2.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
Modified to hep support PNIC_II by Kevin B. Hendricks
@@ -10,9 +9,9 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index d2c1f42..a0e0842 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -1,7 +1,6 @@
/*
drivers/net/tulip/timer.c
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,11 +8,12 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
+
#include "tulip.h"
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 92c68a2..19abbc3 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -8,9 +8,9 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
#ifndef __NET_TULIP_H__
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index af8d2c4..cafa89e 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1,7 +1,5 @@
-/* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux. */
+/* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux.
-/*
- Maintained by Valerie Henson <val_henson@...ux.intel.com>
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
@@ -9,9 +7,9 @@
of the GNU General Public License, incorporated herein by reference.
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver, or visit the project
- Web page at http://sourceforge.net/projects/tulip/
+ for more information on this driver.
+ Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index c0dd25b..8549f11 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -334,8 +334,6 @@ enum state_values {
#define TYPHOON_RESET_TIMEOUT_NOSLEEP ((6 * 1000000) / TYPHOON_UDELAY)
#define TYPHOON_WAIT_TIMEOUT ((1000000 / 2) / TYPHOON_UDELAY)
-#define typhoon_synchronize_irq(x) synchronize_irq(x)
-
#if defined(NETIF_F_TSO)
#define skb_tso_size(x) (skb_shinfo(x)->gso_size)
#define TSO_NUM_DESCRIPTORS 2
@@ -2143,7 +2141,6 @@ typhoon_close(struct net_device *dev)
printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
/* Make sure there is no irq handler running on a different CPU. */
- typhoon_synchronize_irq(dev->irq);
free_irq(dev->irq, dev);
typhoon_free_rx_rings(tp);
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index ae467f1..61c98be 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -74,7 +74,7 @@ EXPORT_SYMBOL_GPL(rndis_status);
* Call context is likely probe(), before interface name is known,
* which is why we won't try to use it in the diagnostics.
*/
-int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
+int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
{
struct cdc_state *info = (void *) &dev->data;
int master_ifnum;
@@ -121,7 +121,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
USB_CDC_GET_ENCAPSULATED_RESPONSE,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, master_ifnum,
- buf, CONTROL_BUFFER_SIZE,
+ buf, buflen,
RNDIS_CONTROL_TIMEOUT_MS);
if (likely(retval >= 8)) {
msg_len = le32_to_cpu(buf->msg_len);
@@ -239,7 +239,7 @@ static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
u.get->len = cpu_to_le32(in_len);
u.get->offset = ccpu2(20);
- retval = rndis_command(dev, u.header);
+ retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE);
if (unlikely(retval < 0)) {
dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
oid, retval);
@@ -328,7 +328,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size);
net->change_mtu = NULL;
- retval = rndis_command(dev, u.header);
+ retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE);
if (unlikely(retval < 0)) {
/* it might not even be an RNDIS device!! */
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
@@ -409,7 +409,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
u.set->offset = ccpu2((sizeof *u.set) - 8);
*(__le32 *)(u.buf + sizeof *u.set) = RNDIS_DEFAULT_FILTER;
- retval = rndis_command(dev, u.header);
+ retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE);
if (unlikely(retval < 0)) {
dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
goto halt_fail_and_release;
@@ -424,7 +424,7 @@ halt_fail_and_release:
memset(u.halt, 0, sizeof *u.halt);
u.halt->msg_type = RNDIS_MSG_HALT;
u.halt->msg_len = ccpu2(sizeof *u.halt);
- (void) rndis_command(dev, (void *)u.halt);
+ (void) rndis_command(dev, (void *)u.halt, CONTROL_BUFFER_SIZE);
fail_and_release:
usb_set_intfdata(info->data, NULL);
usb_driver_release_interface(driver_of(intf), info->data);
@@ -449,7 +449,7 @@ void rndis_unbind(struct usbnet *dev, struct usb_interface *intf)
if (halt) {
halt->msg_type = RNDIS_MSG_HALT;
halt->msg_len = ccpu2(sizeof *halt);
- (void) rndis_command(dev, (void *)halt);
+ (void) rndis_command(dev, (void *)halt, CONTROL_BUFFER_SIZE);
kfree(halt);
}
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index a36d2c8..f001f2a 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -448,7 +448,7 @@ static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
u.get->msg_len = ccpu2(sizeof *u.get);
u.get->oid = oid;
- ret = rndis_command(dev, u.header);
+ ret = rndis_command(dev, u.header, buflen);
if (ret == 0) {
ret = le32_to_cpu(u.get_c->len);
*len = (*len > ret) ? ret : *len;
@@ -498,7 +498,7 @@ static int rndis_set_oid(struct usbnet *dev, __le32 oid, void *data, int len)
u.set->handle = ccpu2(0);
memcpy(u.buf + sizeof(*u.set), data, len);
- ret = rndis_command(dev, u.header);
+ ret = rndis_command(dev, u.header, buflen);
if (ret == 0)
ret = rndis_error_status(u.set_c->status);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 9d6fc8e..f7904ff 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -315,6 +315,25 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
}
return PCI_POWER_ERROR;
}
+
+static int acpi_platform_enable_wakeup(struct device *dev, int is_on)
+{
+ struct acpi_device *adev;
+ int status;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ if (is_on && !device_may_wakeup(dev))
+ return -EINVAL;
+
+ status = acpi_bus_get_device(DEVICE_ACPI_HANDLE(dev), &adev);
+ if (status < 0)
+ return status;
+
+ adev->wakeup.state.enabled = !!is_on;
+ return 0;
+}
#endif
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
@@ -399,6 +418,7 @@ static int __init acpi_pci_init(void)
return 0;
#ifdef CONFIG_ACPI_SLEEP
platform_pci_choose_state = acpi_pci_choose_state;
+ platform_enable_wakeup = acpi_platform_enable_wakeup;
#endif
platform_pci_set_power_state = acpi_pci_set_power_state;
return 0;
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index a375046..fc82446 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -21,6 +21,7 @@
#define DM9000_PLATF_32BITONLY (0x0004)
#define DM9000_PLATF_EXT_PHY (0x0008)
#define DM9000_PLATF_NO_EEPROM (0x0010)
+#define DM9000_PLATF_SIMPLE_PHY (0x0020) /* Use NSR to find LinkStatus */
/* platfrom data for platfrom device structure's platfrom_data field */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 29d6458..0a6e6d4 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -260,7 +260,8 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */
extern void rndis_status(struct usbnet *dev, struct urb *urb);
-extern int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf);
+extern int
+rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
extern int
generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists