linux-kernel - Re: [Linux-ATM-General] [PATCH] firmware: convert Ambassador ATM driver to request

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 30 Jun 2008 14:09:22 +0100
From:	David Woodhouse <dwmw2@...radead.org>
To:	"Chas Williams (CONTRACTOR)" <chas@....nrl.navy.mil>
Cc:	netdev@...r.kernel.org, linux-atm-general@...ts.sourceforge.net,
	linux-kernel@...r.kernel.org
Subject: Re: [Linux-ATM-General] [PATCH] firmware: convert Ambassador ATM
	driver to request_firmware()

On Mon, 2008-06-30 at 08:59 -0400, Chas Williams (CONTRACTOR) wrote:
> In message <1214818473.10393.337.camel@...c.infradead.org>,David Woodhouse writ
> es:
> >A couple of comments though... it looks like you forgot to add
> >MODULE_FIRMWARE(). And shouldn't 'fw_data' in
> >fore200e_load_and_start_firmware() be a (__le32 *) not a (u32 *)?
> 
> this look ok:
> 
> 
> diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
> index d5c1bbf..91710d4 100644
> --- a/drivers/atm/fore200e.c
> +++ b/drivers/atm/fore200e.c
> @@ -2562,7 +2562,8 @@ fore200e_load_and_start_fw(struct fore200e* fore200e)
>      const struct firmware *firmware;
>      struct device *device;
>      struct fw_header *fw_header;
> -    u32 *fw_data, fw_size;
> +    __le32 *fw_data;
> +    u32 fw_size;
>      u32 __iomem *load_addr;
>      char buf[48];
>      int err = -ENODEV;
> @@ -2582,7 +2583,7 @@ fore200e_load_and_start_fw(struct fore200e* fore200e)
>  	return err;
>      }
>  
> -    fw_data = (u32 *) firmware->data;
> +    fw_data = (__le32 *) firmware->data;

Actually, it should probably be 'const' too.

>      fw_size = firmware->size / sizeof(u32);
>      fw_header = (struct fw_header *) firmware->data;
>      load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset);
> @@ -3199,6 +3200,7 @@ static const struct fore200e_bus fore200e_bus[] = {
>      {}
>  };
>  
> -#ifdef MODULE_LICENSE
>  MODULE_LICENSE("GPL");
> -#endif

#ifdef CONFIG_SBUS
> +MODULE_FIRMWARE("sba200e.bin");
#ifdef CONFIG_PCI
#ifdef __LITTLE_ENDIAN
> +MODULE_FIRMWARE("pca200e.bin");
#else /* big-endian */
> +MODULE_FIRMWARE("pca200e_ecd.bin");
#endif
#endif

And wasn't it sba200e_ecd.bin ? 

-- 
dwmw2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/