| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20080701155925.a4c00a8e.akpm@linux-foundation.org>
Date: Tue, 1 Jul 2008 15:59:25 -0700
From: Andrew Morton <akpm@...ux-foundation.org>
To: Henrik Rydberg <rydberg@...omail.se>
Cc: linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
dmitry.torokhov@...il.com, robfitz@...k.net, jikos@...os.cz,
vojtech@...e.cz, dmonakhov@...nvz.org, linux-usb@...r.kernel.org
Subject: Re: [PATCH 001/002] linux-input: bcm5974-0.31: fixed resource
leak, removed work struct, device data struct introduced
> Subject: [PATCH 001/002] linux-input: bcm5974-0.31: fixed resource leak, removed work struct, device data struct introduced
hm, I wonder where [002/002] went.
Please copy the USB list on USB patches.
On Sat, 28 Jun 2008 14:54:20 +0200
Henrik Rydberg <rydberg@...omail.se> wrote:
> BCM5974: This driver adds support for the multitouch trackpad on the new
> Apple Macbook Air and Macbook Pro Penryn laptops. It replaces the
> appletouch driver on those computers, and integrates well with the
> synaptics driver of the Xorg system.
- erk, the driver uses two-spaces for indenting all over the place.
Mayeb the email client mangled it in imaginative ways, but it _looks_
to be intentional.
If so, please don't do that. Kernel code uses hard tabs at
8-cols-per-tab for indenting.
> +config MOUSE_BCM5974
> + tristate "Apple USB BCM5974 Multitouch trackpad support"
> + depends on USB_ARCH_HAS_HCD
> + select USB
selecting USB here seems like a bad idea, although I note that several
other drivers had bad ideas. `depends on' would be better, IMO.
> + help
> + Say Y here if you have an Apple USB BCM5974 Multitouch
> + trackpad.
> +
> + The BCM5974 is the multitouch trackpad found in the Macbook
> + Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
> +
> + It is also found in the IPhone (2007) and Ipod Touch (2008).
> +
> + This driver provides multitouch functionality together with
> + the synaptics X11 driver.
> +
> + The interface is currently identical to the appletouch interface,
> + for further information, see
> + <file:Documentation/input/appletouch.txt>.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called bcm5974.
> +
> config MOUSE_INPORT
> tristate "InPort/MS/ATIXL busmouse"
> depends on ISA
> diff -puN drivers/input/mouse/Makefile~input-support-for-bcm5974-multitouch-trackpad drivers/input/mouse/Makefile
> --- a/drivers/input/mouse/Makefile~input-support-for-bcm5974-multitouch-trackpad
> +++ a/drivers/input/mouse/Makefile
> @@ -6,6 +6,7 @@
>
> obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o
> obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
> +obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
> obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
> obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
> obj-$(CONFIG_MOUSE_INPORT) += inport.o
>
> ...
>
> +static inline
> +const struct atp_config_t *atp_product_config(struct usb_device *udev)
> +{
> + u16 id = le16_to_cpu(udev->descriptor.idProduct);
> + const struct atp_config_t *config;
> + for (config = atp_config_table; config->ansi; ++config)
> + if (config->ansi == id || config->iso == id || config->jis == id)
> + return config;
> + return atp_config_table;
> +}
This is waaaaaaay too big for inlining.
> +/* Wellspring initialization constants */
> +#define ATP_WELLSPRING_MODE_READ_REQUEST_ID 1
> +#define ATP_WELLSPRING_MODE_WRITE_REQUEST_ID 9
> +#define ATP_WELLSPRING_MODE_REQUEST_VALUE 0x300
> +#define ATP_WELLSPRING_MODE_REQUEST_INDEX 0
> +#define ATP_WELLSPRING_MODE_VENDOR_VALUE_1 0x01
> +#define ATP_WELLSPRING_MODE_VENDOR_VALUE_2 0x05
> +
> +#define dprintk(format, a...) \
> + { if (debug) printk(KERN_DEBUG format, ##a); }
> +
> +MODULE_AUTHOR("Henrik Rydberg");
> +MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
> +MODULE_LICENSE("GPL");
> +
> +static int debug = 1;
> +module_param(debug, int, 0644);
> +MODULE_PARM_DESC(debug, "Activate debugging output");
> +
> +static int atp_wellspring_init(struct usb_device *udev)
> +{
> + const struct atp_config_t *cfg = atp_product_config(udev);
> + char *data = kmalloc(8, GFP_DMA);
> + int size;
> +
> + /* reset button endpoint */
> + if (usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
> + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
> + 0, cfg->bt_ep, NULL, 0, 5000)) {
> + err("Could not reset button endpoint");
> + goto error;
> + }
> +
> + /* reset trackpad endpoint */
> + if (usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
> + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
> + 0, cfg->tp_ep, NULL, 0, 5000)) {
> + err("Could not reset trackpad endpoint");
> + goto error;
> + }
> +
> + /* read configuration */
> + size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
> + ATP_WELLSPRING_MODE_READ_REQUEST_ID,
> + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
> + ATP_WELLSPRING_MODE_REQUEST_VALUE,
> + ATP_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
> +
> + if (size != 8) {
> + err("Could not do mode read request from device (Wellspring Raw mode)");
> + goto error;
> + }
> +
> + /* apply the mode switch */
> + data[0] = ATP_WELLSPRING_MODE_VENDOR_VALUE_1;
> + data[1] = ATP_WELLSPRING_MODE_VENDOR_VALUE_2;
This will crash the kernel if the kmalloc() failed. And
kmalloc(GFP_DMA) can easily fail.
Do we really need memory from the GFP_DMA region for this driver? It
would be terribly old-fashioned.
I dunno what USB driver normally use for their dma memory. Perhaps
dma_alloc_coherent()?
> + /* write configuration */
> + size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
> + ATP_WELLSPRING_MODE_WRITE_REQUEST_ID,
> + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
> + ATP_WELLSPRING_MODE_REQUEST_VALUE,
> + ATP_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
> +
> + if (size != 8) {
> + err("Could not do mode write request to device (Wellspring Raw mode)");
> + goto error;
> + }
> +
> + kfree(data);
> + return 0;
> +
> + error:
> + kfree(data);
> + return -EIO;
> +}
> +
> +/* Structure to hold all of our device specific stuff */
> +struct atp {
> + char phys[64];
> + struct usb_device *udev; /* usb device */
> + struct input_dev *input; /* input dev */
> + struct atp_config_t cfg; /* device configuration */
> + unsigned open; /* non-zero if opened */
> + struct urb *bt_urb; /* button usb request block */
> + signed char *bt_data; /* button transferred data */
> + unsigned bt_valid; /* are the button sensors valid ? */
> + unsigned bt_state; /* current button state */
> + struct urb *tp_urb; /* trackpad usb request block */
> + signed char *tp_data; /* trackpad transferred data */
> + unsigned tp_valid; /* are the trackpad sensors valid ? */
> +};
> +
> +static inline int raw2int(__le16 x)
> +{
> + return (short)le16_to_cpu(x);
Given that this function returns signed 32-bit, I'd worry about what it
does when it is presented with 0xffff. otoh, perhaps you indeed
intended to handle negative 16-bit quantities in that fashion, which
would make sense.
> +}
> +
> +static inline int int2scale(const struct atp_params_t *p, int x)
> +{
> + return ((p->max-p->min)*x)/(p->devmax-p->devmin);
> +}
Is there any way in which this can get a divide-by-zero?
> +/**
> + * all value ranges, both device and logical, are assumed to be [a,b).
> + */
> +static inline int int2bound(const struct atp_params_t *p, int x)
> +{
> + int s = p->min+int2scale(p, x);
Please put a space around the operators in expressions like this.
> + return s < p->min?p->min:s >= p->max?p->max-1:s;
That's just unreadable. Please simplify it.
> +}
> +
> +/**
This leadin is exclusively used to identify a kerneldoc-style comment.
> + * check quality of reading.
> + * -1: bad data
> + * 0: ignore this reading
> + * 1: good reading
> + */
But this is not a kerneldoc comment. Please remove all the incorrect
/** instances.
>
> ...
>
> +/**
> + * convert raw data to synaptics sensor output.
> + * returns the number of fingers on the trackpad,
> + * or a negative number in vase of bad data.
> + */
> +static int compute_movement(int *abs_x, int *abs_y,
> + int *rel_x, int *rel_y,
> + int *pressure,
> + struct atp_config_t *cfg,
> + const unsigned char *data, int size)
> +{
> + const int nfinger = (size-26)/28;
> + const struct tp_data_t *tp = (struct tp_data_t *) data;
> +
> + if (nfinger) {
> + *abs_x = int2bound(&cfg->x, raw2int(tp->finger->abs_x) - cfg->x.devmin);
> + *abs_y = int2bound(&cfg->y, cfg->y.devmax - raw2int(tp->finger->abs_y));
> + *rel_x = int2scale(&cfg->x, raw2int(tp->finger->rel_x));
> + *rel_y = int2scale(&cfg->y, -raw2int(tp->finger->rel_y));
> + *pressure = int2bound(&cfg->p, raw2int(tp->finger->force_major));
> + } else {
> + *abs_x = 0;
> + *abs_y = 0;
> + *rel_x = 0;
> + *rel_y = 0;
> + *pressure = 0;
> + }
> +
> + /* report zero fingers for zero pressure */
> + return *pressure > 0?nfinger:0;
Normal style is
return *pressure > 0 ? nfinger : 0;
(lots of other places)
> +}
> +
> +static void atp_button(struct urb *urb)
> +{
> + struct atp *dev = urb->context;
> + const unsigned char *data = dev->bt_data;
> + const int size = dev->bt_urb->actual_length;
> + int button = 0, retval;
> +
> + switch (urb->status) {
> + case 0:
> + /* success */
> + break;
> + case -EOVERFLOW:
> + case -ECONNRESET:
> + case -ENOENT:
> + case -ESHUTDOWN:
> + /* This urb is terminated, clean up */
> + dbg("%s - urb shutting down with status: %d",
> + __func__, urb->status);
> + return;
> + default:
> + dbg("%s - nonzero urb status received: %d",
> + __func__, urb->status);
> + goto exit;
> + }
> +
> + /* first sample data ignored */
> + if (!dev->bt_valid) {
> + dev->bt_valid = 1;
> + goto exit;
> + }
> +
> + /* drop incomplete datasets */
> + if (size != 4) {
> + dprintk("bcm5974: incomplete button package (first byte: %d, length: %d)\n",
> + (int)data[0], size);
> + goto exit;
> + }
> +
> + button = data[1];
> +
> + /* only report button state changes */
> + if (button != dev->bt_state) {
> + input_report_key(dev->input, BTN_LEFT, button);
> + input_sync(dev->input);
> + }
> +
> + dev->bt_state = button;
> +
> + exit:
> + retval = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
GFP_ATOMIC is a red flag. Is this quite unrelaible allocation mode
really needed here?
> + if (retval) {
> + err("%s - button usb_submit_urb failed with result %d",
> + __func__, retval);
> + }
> +}
> +
> +static void atp_trackpad(struct urb *urb)
> +{
> + struct atp *dev = urb->context;
> + int abs_x, abs_y, rel_x, rel_y, pressure;
> + int quality, nfinger, retval;
> +
> + switch (urb->status) {
> + case 0:
> + /* success */
> + break;
> + case -EOVERFLOW:
> + case -ECONNRESET:
> + case -ENOENT:
> + case -ESHUTDOWN:
> + /* This urb is terminated, clean up */
> + dbg("%s - urb shutting down with status: %d",
> + __func__, urb->status);
> + return;
> + default:
> + dbg("%s - nonzero urb status received: %d",
> + __func__, urb->status);
> + goto exit;
> + }
> +
> + /* first sample data ignored */
> + if (!dev->tp_valid) {
> + dev->tp_valid = 1;
> + goto exit;
> + }
> +
> + /* determine quality of reading */
> + quality = compute_quality(dev->tp_data, dev->tp_urb->actual_length);
> +
> + /* drop incomplete datasets */
> + if (quality < 0) {
> + dprintk("bcm5974: incomplete trackpad package "
> + "(first byte: %d, length: %d)\n",
> + (int)dev->tp_data[0], dev->tp_urb->actual_length);
> + goto exit;
> + }
> +
> + /* drop poor quality readings */
> + if (quality == 0)
> + goto exit;
> +
> + nfinger = compute_movement(&abs_x, &abs_y, &rel_x, &rel_y, &pressure,
> + &dev->cfg,
> + dev->tp_data, dev->tp_urb->actual_length);
> +
> + if (debug > 1) {
> + printk(KERN_DEBUG "bcm5974: x: %04d y: %04d dx: %3d dy: %3d p: %3d\n",
> + abs_x, abs_y, rel_x, rel_y, pressure);
> + }
> +
> + /* input_report_key(dev->input,BTN_TOUCH,pressure>dev->cfg.p.fuzz); */
> + input_report_abs(dev->input, ABS_PRESSURE, pressure);
> + input_report_abs(dev->input, ABS_X, abs_x);
> + input_report_abs(dev->input, ABS_Y, abs_y);
> + /* input_report_rel(dev->input, REL_X, rel_x); */
> + /* input_report_rel(dev->input, REL_Y, rel_y); */
> + input_report_key(dev->input, BTN_TOOL_FINGER, nfinger == 1);
> + input_report_key(dev->input, BTN_TOOL_DOUBLETAP, nfinger == 2);
> + input_report_key(dev->input, BTN_TOOL_TRIPLETAP, nfinger > 2);
> + input_sync(dev->input);
> +
> + exit:
> + retval = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
ditto.
> + if (retval) {
> + err("%s - trackpad usb_submit_urb failed with result %d",
> + __func__, retval);
> + }
> +}
> +
> +static int atp_open(struct input_dev *input)
> +{
> + struct atp *dev = input_get_drvdata(input);
> +
> + if (usb_submit_urb(dev->bt_urb, GFP_ATOMIC))
> + goto error;
> +
> + if (usb_submit_urb(dev->tp_urb, GFP_ATOMIC))
> + goto err_free_bt_urb;
etc.
> + dev->open = 1;
> + return 0;
> +
> + err_free_bt_urb:
> + usb_free_urb(dev->bt_urb);
> + error:
> + return -EIO;
> +}
> +
>
> ...
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists