linux-kernel - Re: [RFC PATCH] AHCI: speed up resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200807040123.50337.rjw@sisk.pl>
Date:	Fri, 4 Jul 2008 01:23:49 +0200
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Zhang Rui <rui.zhang@...el.com>
Cc:	linux-pm <linux-pm@...ts.linux-foundation.org>,
	linux-kernel <linux-kernel@...r.kernel.org>, tj@...nel.org
Subject: Re: [RFC PATCH] AHCI: speed up resume

On Thursday, 3 of July 2008, Zhang Rui wrote:
> During S3 resume, AHCI driver sleeps 1 second to wait for the HBA reset
> to finish. This is luxurious, :)
> 
> According to the AHCI 1.2 spec, We should poll the HOST_CTL register,
> and return error if the host reset is not finished within 1 second.
> 
> Test results show that the HBA reset can be done quickly(in usecs).
> And this patch may save nearly 1 second during resume.

That's a lot.

How heavily has it been tested?

Rafael


> Signed-off-by: Zhang Rui <rui.zhang@...el.com>
> --
>  drivers/ata/ahci.c |   17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> Index: linux-2.6/drivers/ata/ahci.c
> ===================================================================
> --- linux-2.6.orig/drivers/ata/ahci.c	2007-05-03 11:06:33.000000000 +0800
> +++ linux-2.6/drivers/ata/ahci.c	2008-07-02 16:25:54.000000000 +0800
> @@ -1073,18 +1073,29 @@
>  
>  	/* global controller reset */
>  	if (!ahci_skip_host_reset) {
> +		int delay = msecs_to_jiffies(1000);
> +		int timeout;
> +
>  		tmp = readl(mmio + HOST_CTL);
>  		if ((tmp & HOST_RESET) == 0) {
>  			writel(tmp | HOST_RESET, mmio + HOST_CTL);
>  			readl(mmio + HOST_CTL); /* flush */
>  		}
>  
> -		/* reset must complete within 1 second, or
> +		/*
> + 		 * to perform host reset, OS should set HOST_RESET
> +		 * and poll until this bit is read to be "0"
> + 		 * reset must complete within 1 second, or
>  		 * the hardware should be considered fried.
>  		 */
> -		ssleep(1);
> +		timeout = jiffies + delay;
> +		while (jiffies < timeout) {
> +			tmp = readl(mmio + HOST_CTL);
> +			if (!(tmp & HOST_RESET))
> +				break;
> +			cpu_relax();
> +		}
>  
> -		tmp = readl(mmio + HOST_CTL);
>  		if (tmp & HOST_RESET) {
>  			dev_printk(KERN_ERR, host->dev,
>  				   "controller reset failed (0x%x)\n", tmp);
> 
> 
> 
> 



-- 
"Premature optimization is the root of all evil." - Donald Knuth
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/