[ 0.000000] Linux version 2.6.26-rc8-mm1 (lynx@zephyr) (gcc version 4.3.1 (Gentoo 4.3.1 p1.0) ) #17 SMP Thu Jul 3 15:38:02 MDT 2008 [ 0.000000] Command line: root=/dev/sda2 rootfstype=reiser4 rootflags=defaults,noatime i8042.nomux elevator=cfq resume=/dev/sda3 panic=5 nmi_watchdog=2,panic debug idle=poll nohz=off [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) [ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] using polling idle threads. [ 0.000000] last_pfn = 0x3ff70 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] kernel direct mapping tables up to 3ff70000 @ 8000-a000 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3FF7A87E, 0034 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FF7EE13, 0074 (r1 NVIDIA CK8 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 3FF7A8B2, 4561 (r1 NVIDIA CK8 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FF7FFC0, 0040 [ 0.000000] ACPI: APIC 3FF7EE87, 005A (r1 NVIDIA NV_APIC_ 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3FF7EEE1, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3FF7EF09, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] (5 early reservations) ==> bootmem [ 0.000000] #0 [ 0000000000 - 0000001000 ] BIOS data page ===> [ 0000000000 - 0000001000 ] [ 0.000000] #1 [ 0000006000 - 0000008000 ] TRAMPOLINE ===> [ 0000006000 - 0000008000 ] [ 0.000000] #2 [ 0000200000 - 00009042d8 ] TEXT DATA BSS ===> [ 0000200000 - 00009042d8 ] [ 0.000000] #3 [ 000009f800 - 0000100000 ] BIOS reserved ===> [ 000009f800 - 0000100000 ] [ 0.000000] #4 [ 0000008000 - 000000a000 ] PGTABLE ===> [ 0000008000 - 000000a000 ] [ 0.000000] Scan SMP from ffff810000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff81000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8100000f0000 for 65536 bytes. [ 0.000000] Scan SMP from ffff81000009f800 for 1024 bytes. [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0 [ 0.000000] sizeof(struct page) = 56 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff70 [ 0.000000] On node 0 totalpages: 261903 [ 0.000000] DMA zone: 2046 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254377 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 42608 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256423 [ 0.000000] Kernel command line: root=/dev/sda2 rootfstype=reiser4 rootflags=defaults,noatime i8042.nomux elevator=cfq resume=/dev/sda3 panic=5 nmi_watchdog=2,panic debug idle=poll nohz=off [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] time.c: Detected 797.936 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Checking aperture... [ 0.004000] AGP bridge at 00:00:00 [ 0.004000] Aperture from AGP @ e8000000 old size 32 MB [ 0.004000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB [ 0.004000] Aperture from AGP @ e8000000 size 32 MB (APSIZE 0) [ 0.004000] Node 0: aperture @ e8000000 size 128 MB [ 0.004000] Memory: 1023812k/1048000k available (3524k kernel code, 23228k reserved, 1557k data, 1352k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004290] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>1595.87 BogoMIPS (lpj=3191744) [ 0.004455] Security Framework initialized [ 0.004517] Capability LSM initialized [ 0.004588] Mount-cache hash table entries: 256 [ 0.004979] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.005031] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.005125] SMP alternatives: switching to UP code [ 0.014815] Freeing SMP alternatives: 29k freed [ 0.014892] ACPI: Core revision 20080609 [ 0.025355] Parsing all Control Methods: [ 0.025655] Table [DSDT](id 0001) - 650 Objects with 66 Devices 205 Methods 24 Regions [ 0.025849] Parsing all Control Methods: [ 0.026169] Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions [ 0.026273] tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired [ 0.032002] evxfevnt-0091 [00] enable : Transition to ACPI mode successful [ 0.072004] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 0a [ 0.072004] Using local APIC timer interrupts. [ 0.076004] APIC timer calibration result 12467753 [ 0.076004] Detected 12.467 MHz APIC timer. [ 0.076004] Brought up 1 CPUs [ 0.076004] Total of 1 processors activated (1595.87 BogoMIPS). [ 0.076004] Testing NMI watchdog ... OK. [ 0.156009] CPU0 attaching NULL sched-domain. [ 0.156009] net_namespace: 584 bytes [ 0.156009] NET: Registered protocol family 16 [ 0.156009] No dock devices found. [ 0.156009] node 0 link 0: io port [1000, fffff] [ 0.156009] TOM: 0000000040000000 aka 1024M [ 0.156009] node 0 link 0: mmio [a0000, bffff] [ 0.156009] node 0 link 0: mmio [40000000, fe0bffff] [ 0.156009] bus: [00,ff] on node 0 link 0 [ 0.156009] bus: 00 index 0 io port: [0, ffff] [ 0.156009] bus: 00 index 1 mmio: [a0000, bffff] [ 0.156009] bus: 00 index 2 mmio: [40000000, fcffffffff] [ 0.156009] ACPI: bus type pci registered [ 0.156009] PCI: Using configuration type 1 for base access [ 0.158669] evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 0.158815] evgpeblk-0957 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 [ 0.159322] ACPI: EC: Look up EC in DSDT [ 0.160851] Completing Region/Field/Buffer/Package initialization:........................................................................... [ 0.164952] Initialized 24/24 Regions 2/2 Fields 28/29 Buffers 21/21 Packages (662 nodes) [ 0.165058] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 0.165274] Executed 1 _INI methods requiring 0 _STA executions (examined 70 objects) [ 0.165590] evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block [ 0.165897] evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block [ 0.166037] ACPI: Interpreter enabled [ 0.166082] ACPI: (supports S0 S3 S4 S5) [ 0.166241] ACPI: Using IOAPIC for interrupt routing [ 0.170233] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.242672] ACPI: EC: GPE = 0x21, I/O: command/status = 0x66, data = 0x62 [ 0.242725] ACPI: EC: driver started in interrupt mode [ 0.242867] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.243992] bus 00 -> node 0 [ 0.244057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.244266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.244396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] [ 0.273615] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 [ 0.274193] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 [ 0.274765] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0 [ 0.275291] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. [ 0.275886] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 [ 0.276467] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 [ 0.277030] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 [ 0.277600] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 [ 0.279277] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 [ 0.279840] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. [ 0.280435] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 [ 0.281006] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 [ 0.281577] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. [ 0.282181] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. [ 0.282672] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.282779] pnp: PnP ACPI init [ 0.282834] ACPI: bus type pnp registered [ 0.315024] pnp: PnP ACPI: found 12 devices [ 0.315072] ACPI: ACPI bus type pnp unregistered [ 0.315578] SCSI subsystem initialized [ 0.315674] libata version 3.00 loaded. [ 0.316317] PCI: Using ACPI for IRQ routing [ 0.316379] pci 0000:00:00.0: BAR 0: can't allocate resource [ 0.328137] agpgart: Detected AGP bridge 0 [ 0.328190] agpgart: Setting up Nforce3 AGP. [ 0.335260] agpgart: AGP aperture is 128M @ 0xe8000000 [ 0.335528] ACPI: RTC can wake from S4 [ 0.344063] system 00:01: ioport range 0x8000-0x807f has been reserved [ 0.344117] system 00:01: ioport range 0x8080-0x80ff has been reserved [ 0.344169] system 00:01: ioport range 0x8400-0x847f has been reserved [ 0.344221] system 00:01: ioport range 0x8480-0x84ff has been reserved [ 0.344273] system 00:01: ioport range 0x8800-0x887f has been reserved [ 0.344325] system 00:01: ioport range 0x8880-0x88ff has been reserved [ 0.344378] system 00:01: ioport range 0x2040-0x207f has been reserved [ 0.344431] system 00:01: ioport range 0x2000-0x203f has been reserved [ 0.344494] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.344563] system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.344616] system 00:02: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.344670] system 00:02: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.344730] system 00:03: ioport range 0x200-0x20f has been reserved [ 0.344783] system 00:03: ioport range 0x680-0x6ff has been reserved [ 0.344835] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.344887] system 00:03: ioport range 0xfe00-0xfe01 has been reserved [ 0.345827] pci 0000:02:04.0: BAR 9 too large: 0x00000000000000-0x00000003ffffff [ 0.345898] pci 0000:02:04.1: BAR 9 too large: 0x00000000000000-0x00000003ffffff [ 0.345983] pci 0000:02:04.0: BAR 10: can't allocate mem resource [0xe4000000-0xe17fffff] [ 0.346053] pci 0000:02:04.1: BAR 10: can't allocate mem resource [0xe4000000-0xe17fffff] [ 0.346125] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03 [ 0.346176] pci 0000:02:04.0: IO window: 0x003000-0x0030ff [ 0.346228] pci 0000:02:04.0: IO window: 0x003400-0x0034ff [ 0.346279] pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07 [ 0.346330] pci 0000:02:04.1: IO window: 0x003800-0x0038ff [ 0.346381] pci 0000:02:04.1: IO window: 0x003c00-0x003cff [ 0.346434] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.346484] pci 0000:00:0a.0: IO window: 0x3000-0x7fff [ 0.346535] pci 0000:00:0a.0: MEM window: 0xe0100000-0xe17fffff [ 0.346586] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.346639] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 [ 0.346688] pci 0000:00:0b.0: IO window: disabled [ 0.346738] pci 0000:00:0b.0: MEM window: 0xe2000000-0xe2ffffff [ 0.346791] pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f80fffff [ 0.346870] pci 0000:00:0a.0: setting latency timer to 64 [ 0.347587] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 [ 0.347648] pci 0000:02:04.0: PCI INT A -> Link[LNK1] -> GSI 19 (level, low) -> IRQ 19 [ 0.348287] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 [ 0.348346] pci 0000:02:04.1: PCI INT B -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18 [ 0.348456] NET: Registered protocol family 2 [ 0.388146] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.388882] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.390869] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.392045] TCP: Hash tables configured (established 131072 bind 65536) [ 0.392098] TCP reno registered [ 0.404164] NET: Registered protocol family 1 [ 0.501002] Simple Boot Flag at 0x37 set to 0x1 [ 0.502444] audit: initializing netlink socket (disabled) [ 0.502513] type=2000 audit(1215140827.500:1): initialized [ 0.515638] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.515998] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.516286] msgmni has been set to 2000 [ 0.516563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.516631] io scheduler noop registered [ 0.516677] io scheduler anticipatory registered [ 0.516724] io scheduler deadline registered [ 0.516787] io scheduler cfq registered (default) [ 0.516999] pci 0000:01:00.0: Boot video device [ 0.517982] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 0.518045] nvidiafb 0000:01:00.0: PCI INT A -> Link[LNK5] -> GSI 16 (level, low) -> IRQ 16 [ 0.518933] nvidiafb: Device ID: 10de0179 [ 0.532067] nvidiafb: CRTC0 analog not found [ 0.548062] nvidiafb: CRTC1 analog not found [ 0.647920] i2c-adapter i2c-0: unable to read EDID block. [ 0.799908] i2c-adapter i2c-0: unable to read EDID block. [ 0.848031] Switched to high resolution mode on CPU 0 [ 0.951890] i2c-adapter i2c-0: unable to read EDID block. [ 1.118185] i2c-adapter i2c-1: unable to read EDID block. [ 1.288438] i2c-adapter i2c-1: unable to read EDID block. [ 1.460453] i2c-adapter i2c-1: unable to read EDID block. [ 1.516012] nvidiafb: CRTC 1 is currently programmed for DFP [ 1.516062] nvidiafb: Using DFP on CRTC 1 [ 1.516111] nvidiafb: Panel size is 1920 x 1200 [ 1.516159] nvidiafb: Panel is LVDS [ 1.519654] nvidiafb: MTRR set to ON [ 1.519720] fbcvt: 1920x1200@60: CVT Name - 2.304MA-R [ 1.641564] nvidiafb: Flat panel dithering disabled [ 1.645219] Console: switching to colour frame buffer device 240x75 [ 1.648857] nvidiafb: PCI nVidia NV17 framebuffer (64MB @ 0xF0000000) [ 1.651945] ACPI: AC Adapter [ACAD] (on-line) [ 1.876190] ACPI: Battery Slot [BAT1] (battery present) [ 1.876442] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.876478] ACPI: Power Button (FF) [PWRF] [ 1.876624] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.876662] ACPI: Power Button (CM) [PWRB] [ 1.876809] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.881503] ACPI: Lid Switch [LID] [ 1.882489] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/device:19/input/input3 [ 1.882532] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.885856] processor ACPI0007:00: registered as cooling_device0 [ 1.930538] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.936531] ACPI: Thermal Zone [THRM] (58 C) [ 1.972299] Linux agpgart interface v0.103 [ 1.972328] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.972362] Hangcheck: Using get_cycles(). [ 1.973720] loop: module loaded [ 1.975120] 8139too Fast Ethernet driver 0.9.28 [ 1.975175] 8139too 0000:02:01.0: PCI INT A -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18 [ 1.976109] eth0: RealTek RTL8139 at 0xffffc2000003e800, 00:0f:b0:07:dc:49, IRQ 18 [ 1.976142] eth0: Identified 8139 chip type 'RTL-8101' [ 1.976276] console [netcon0] enabled [ 1.976298] netconsole: network logging started [ 1.976386] Driver 'sd' needs updating - please use bus_type methods [ 1.976473] Driver 'sr' needs updating - please use bus_type methods [ 1.976631] pata_amd 0000:00:08.0: version 0.3.10 [ 1.976723] pata_amd 0000:00:08.0: setting latency timer to 64 [ 1.976847] scsi0 : pata_amd [ 1.977096] scsi1 : pata_amd [ 1.978771] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14 [ 1.978806] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15 [ 2.140521] ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100 [ 2.140553] ata1.00: 195371568 sectors, multi 16: LBA48 [ 2.140600] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13) [ 2.156444] ata1.00: configured for UDMA/100 [ 2.320333] ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.19, max MWDMA2 [ 2.320381] ata2: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc6000000) ACPI=0x39f (120:600:0x12) [ 2.336290] ata2.00: configured for MWDMA2 [ 2.336359] isa bounce pool size: 16 pages [ 2.336514] scsi 0:0:0:0: Direct-Access ATA HTS721010G9AT00 MCZO PQ: 0 ANSI: 5 [ 2.336837] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 2.336899] sd 0:0:0:0: [sda] Write Protect is off [ 2.336926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.336997] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.337134] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 2.337188] sd 0:0:0:0: [sda] Write Protect is off [ 2.337213] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.337282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.338741] sda: sda1 sda2 sda3 [ 2.362458] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.364102] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.366301] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.19 PQ: 0 ANSI: 5 [ 2.371007] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.372552] Uniform CD-ROM driver Revision: 3.20 [ 2.374355] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.376608] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.378476] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] [ 2.380004] yenta_cardbus 0000:02:04.0: CardBus bridge, secondary bus 0000:03 [ 2.381647] yenta_cardbus 0000:02:04.0: IO window: 0x003000-0x0030ff [ 2.383297] yenta_cardbus 0000:02:04.0: IO window: 0x003400-0x0034ff [ 2.385259] yenta_cardbus 0000:02:04.0: PREFETCH window: 0xe0400000-0xe07fffff [ 2.386931] yenta_cardbus 0000:02:04.0: MEM window: 0xe0800000-0xe0bfffff [ 2.388569] Yenta: Enabling burst memory read transactions [ 2.390281] Yenta: Using CSCINT to route CSC interrupts to PCI [ 2.392006] Yenta: Routing CardBus interrupts to PCI [ 2.393759] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 [ 2.625822] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 [ 2.627647] Socket status: 30000086 [ 2.629474] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 2.631322] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 2.633105] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 2.889018] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] [ 2.890897] Yenta: Using CSCINT to route CSC interrupts to PCI [ 2.892002] Yenta: Routing CardBus interrupts to PCI [ 2.893798] Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 [ 3.126223] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 3.128002] Socket status: 30000006 [ 3.129847] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 3.131717] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 3.133523] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 3.389552] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.398192] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.400018] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.402167] mice: PS/2 mouse device common for all mice [ 3.404144] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.405962] rtc0: alarms up to one year, y3k [ 3.407891] cpuidle: using governor ladder [ 3.409692] cpuidle: using governor menu [ 3.413492] TCP cubic registered [ 3.415307] Initializing XFRM netlink socket [ 3.416004] NET: Registered protocol family 10 [ 3.419569] NET: Registered protocol family 17 [ 3.421616] NET: Registered protocol family 15 [ 3.423336] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu cores) (version 2.20.00) [ 3.425376] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 [ 3.427126] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 3.428866] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 [ 3.431091] PM: Resume from partition /dev/sda3 [ 3.432924] PM: Checking hibernation image. [ 3.449182] PM: Resume from disk failed. [ 3.451019] registered taskstats version 1 [ 3.452983] rtc_cmos 00:06: setting system clock to 2008-07-04 03:07:11 UTC (1215140831) [ 3.454745] Freeing unused kernel memory: 1352k freed [ 3.464042] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 5.483817] reiser4: sda2: found disk format 4.0.0. [ 16.207715] usbcore: registered new interface driver usbfs [ 16.207823] usbcore: registered new interface driver hub [ 16.207885] usbcore: registered new device driver usb [ 16.226188] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 16.226942] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 16.226959] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 16.226982] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 16.226988] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 16.227067] drivers/usb/core/inode.c: creating file 'devices' [ 16.227076] drivers/usb/core/inode.c: creating file '001' [ 16.227083] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 16.227096] ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6 [ 16.227107] ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 [ 16.227112] ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 park [ 16.227150] ehci_hcd 0000:00:02.2: park 0 [ 16.227158] ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 16.227172] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 16.227176] ehci_hcd 0000:00:02.2: supports USB remote wakeup [ 16.227203] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe0004000 [ 16.227210] ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 16.227219] ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 16.235168] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.235176] ohci_hcd: block sizes: ed 80 td 96 [ 16.247023] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.247081] usb usb1: default language 0x0409 [ 16.247187] usb usb1: uevent [ 16.247212] usb usb1: usb_probe_device [ 16.247218] usb usb1: configuration #1 chosen from 1 choice [ 16.247230] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 16.247258] usb 1-0:1.0: uevent [ 16.247282] hub 1-0:1.0: usb_probe_interface [ 16.247286] hub 1-0:1.0: usb_probe_interface - got id [ 16.247290] hub 1-0:1.0: USB hub found [ 16.247305] hub 1-0:1.0: 6 ports detected [ 16.247309] hub 1-0:1.0: standalone hub [ 16.247312] hub 1-0:1.0: no power switching (usb 1.0) [ 16.247316] hub 1-0:1.0: individual port over-current protection [ 16.247321] hub 1-0:1.0: power on to power good time: 20ms [ 16.247329] hub 1-0:1.0: local power source is good [ 16.247334] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 16.348070] ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 16.348084] hub 1-0:1.0: port 1: status 0501 change 0001 [ 16.348098] ehci_hcd 0000:00:02.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 16.348105] hub 1-0:1.0: port 3: status 0501 change 0001 [ 16.348115] ehci_hcd 0000:00:02.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 16.348121] hub 1-0:1.0: port 4: status 0501 change 0001 [ 16.371787] snd_ac97_codec: Unknown parameter `power_save' [ 16.426835] snd_ac97_codec: Unknown parameter `power_save' [ 16.448813] snd_intel8x0m: Unknown symbol snd_ac97_resume [ 16.449872] snd_intel8x0m: Unknown symbol snd_ac97_mixer [ 16.450082] snd_intel8x0m: Unknown symbol snd_ac97_bus [ 16.450639] snd_intel8x0m: Unknown symbol snd_ac97_suspend [ 16.452911] snd_intel8x0m: Unknown symbol snd_ac97_write [ 16.453068] drivers/usb/core/inode.c: creating file '001' [ 16.453153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 16.453159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.453164] usb usb1: Product: EHCI Host Controller [ 16.453168] usb usb1: Manufacturer: Linux 2.6.26-rc8-mm1 ehci_hcd [ 16.453172] usb usb1: SerialNumber: 0000:00:02.2 [ 16.453260] ohci_hcd 0000:00:02.0: enabling device (0004 -> 0006) [ 77.431852] Clocksource tsc unstable (delta = 60931010630 ns) [ 77.432592] hub 1-0:1.0: state 7 ports 6 chg 001a evt 0000 [ 77.432592] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 77.432592] snd_intel8x0: Unknown symbol snd_ac97_pcm_close [ 77.432592] snd_intel8x0: Unknown symbol snd_ac97_resume [ 77.433696] snd_intel8x0: Unknown symbol snd_ac97_pcm_open [ 77.434003] snd_intel8x0: Unknown symbol snd_ac97_set_rate [ 77.434151] snd_intel8x0: Unknown symbol snd_ac97_update_bits [ 77.434312] snd_intel8x0: Unknown symbol snd_ac97_mixer [ 77.434521] snd_intel8x0: Unknown symbol snd_ac97_bus [ 77.434964] snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules [ 77.435270] snd_intel8x0: Unknown symbol snd_ac97_suspend [ 77.436694] snd_intel8x0: Unknown symbol snd_ac97_get_short_name [ 77.437207] snd_intel8x0: Unknown symbol snd_ac97_pcm_assign [ 77.438290] snd_intel8x0: Unknown symbol snd_ac97_tune_hardware [ 77.484352] ehci_hcd 0000:00:02.2: port 1 high speed [ 77.484365] ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 77.540121] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 77.562106] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 77.562127] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21 [ 77.562155] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 77.562161] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 77.562236] drivers/usb/core/inode.c: creating file '002' [ 77.562253] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 77.562265] ohci_hcd 0000:00:02.0: USB HC TakeOver from BIOS/SMM [ 77.764767] ehci_hcd 0000:00:02.2: port 1 high speed [ 77.764776] ehci_hcd 0000:00:02.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 77.811811] ohci_hcd 0000:00:02.0: created debug files [ 77.811850] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe0000000 [ 77.845329] usb 1-1: default language 0x0409 [ 77.846935] usb 1-1: uevent [ 77.846964] usb 1-1: usb_probe_device [ 77.846970] usb 1-1: configuration #1 chosen from 1 choice [ 77.847329] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 77.847362] usb 1-1:1.0: uevent [ 77.847495] drivers/usb/core/inode.c: creating file '002' [ 77.847579] usb 1-1: New USB device found, idVendor=0bc2, idProduct=0502 [ 77.847584] usb 1-1: New USB device strings: Mfr=5, Product=2, SerialNumber=1 [ 77.847589] usb 1-1: Product: ST94811U2-RK [ 77.847592] usb 1-1: Manufacturer: Seagate [ 77.847595] usb 1-1: SerialNumber: 33504D304C573434 [ 77.847608] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 77.866084] ohci_hcd 0000:00:02.0: OHCI controller state [ 77.866096] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 77.866104] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 77.866110] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 77.866116] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 77.866122] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH [ 77.866129] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 77.866135] ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3) [ 77.866141] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 77.866146] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 77.866153] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 77.866159] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 77.866164] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 77.866231] usb usb2: default language 0x0409 [ 77.866356] usb usb2: uevent [ 77.866384] usb usb2: usb_probe_device [ 77.866390] usb usb2: configuration #1 chosen from 1 choice [ 77.866403] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 77.866431] usb 2-0:1.0: uevent [ 77.866452] hub 2-0:1.0: usb_probe_interface [ 77.866456] hub 2-0:1.0: usb_probe_interface - got id [ 77.866460] hub 2-0:1.0: USB hub found [ 77.866482] hub 2-0:1.0: 3 ports detected [ 77.866485] hub 2-0:1.0: standalone hub [ 77.866488] hub 2-0:1.0: no power switching (usb 1.0) [ 77.866492] hub 2-0:1.0: global over-current protection [ 77.866496] hub 2-0:1.0: power on to power good time: 2ms [ 77.866505] hub 2-0:1.0: local power source is good [ 77.866508] hub 2-0:1.0: no over-current condition exists [ 77.866513] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 77.900316] ehci_hcd 0000:00:02.2: port 3 high speed [ 77.900329] ehci_hcd 0000:00:02.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT [ 77.956084] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 77.968220] drivers/usb/core/inode.c: creating file '001' [ 77.968317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 77.968322] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 77.968327] usb usb2: Product: OHCI Host Controller [ 77.968331] usb usb2: Manufacturer: Linux 2.6.26-rc8-mm1 ohci_hcd [ 77.968335] usb usb2: SerialNumber: 0000:00:02.0 [ 77.968419] ohci_hcd 0000:00:02.1: enabling device (0004 -> 0006) [ 77.969163] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 [ 77.969180] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20 [ 77.969207] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 77.969213] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 77.969266] drivers/usb/core/inode.c: creating file '003' [ 77.969276] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 77.969286] ohci_hcd 0000:00:02.1: USB HC TakeOver from BIOS/SMM [ 78.172018] ehci_hcd 0000:00:02.2: port 3 high speed [ 78.172027] ehci_hcd 0000:00:02.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT [ 78.242843] ohci_hcd 0000:00:02.1: created debug files [ 78.242881] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe0001000 [ 78.249462] usb 1-3: default language 0x0409 [ 78.250697] usb 1-3: uevent [ 78.250727] usb 1-3: usb_probe_device [ 78.250733] usb 1-3: configuration #1 chosen from 1 choice [ 78.250960] usb 1-3: adding 1-3:1.0 (config #1, interface 0) [ 78.250995] usb 1-3:1.0: uevent [ 78.251135] drivers/usb/core/inode.c: creating file '003' [ 78.251216] usb 1-3: New USB device found, idVendor=0324, idProduct=bc06 [ 78.251221] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 78.251226] usb 1-3: Product: RALLY2_TURBO [ 78.251230] usb 1-3: Manufacturer: OCZ Technology [ 78.251233] usb 1-3: SerialNumber: AA04012700085391 [ 78.251246] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 78.298056] ohci_hcd 0000:00:02.1: OHCI controller state [ 78.298065] ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers [ 78.298073] ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 78.298080] ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0 [ 78.298086] ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF [ 78.298092] ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH [ 78.298098] ohci_hcd 0000:00:02.1: hcca frame #0003 [ 78.298105] ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3) [ 78.298110] ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 78.298116] ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE [ 78.298123] ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS [ 78.298128] ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS [ 78.298134] ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS [ 78.298168] usb usb3: default language 0x0409 [ 78.298290] usb usb3: uevent [ 78.298317] usb usb3: usb_probe_device [ 78.298322] usb usb3: configuration #1 chosen from 1 choice [ 78.298335] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 78.298363] usb 3-0:1.0: uevent [ 78.298385] hub 3-0:1.0: usb_probe_interface [ 78.298403] hub 3-0:1.0: usb_probe_interface - got id [ 78.298407] hub 3-0:1.0: USB hub found [ 78.298427] hub 3-0:1.0: 3 ports detected [ 78.298430] hub 3-0:1.0: standalone hub [ 78.298433] hub 3-0:1.0: no power switching (usb 1.0) [ 78.298437] hub 3-0:1.0: global over-current protection [ 78.298442] hub 3-0:1.0: power on to power good time: 2ms [ 78.298450] hub 3-0:1.0: local power source is good [ 78.298454] hub 3-0:1.0: no over-current condition exists [ 78.298459] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 78.304097] ehci_hcd 0000:00:02.2: port 4 full speed --> companion [ 78.304109] ehci_hcd 0000:00:02.2: GetStatus port 4 status 003001 POWER OWNER sig=se0 CONNECT [ 78.304140] hub 1-0:1.0: port 4 not reset yet, waiting 50ms [ 78.360447] ehci_hcd 0000:00:02.2: GetStatus port 4 status 003802 POWER OWNER sig=j CSC [ 78.360482] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 78.360493] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 78.400153] ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS [ 78.400163] hub 3-0:1.0: port 2: status 0101 change 0001 [ 78.504172] drivers/usb/core/inode.c: creating file '001' [ 78.504255] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 78.504261] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 78.504266] usb usb3: Product: OHCI Host Controller [ 78.504270] usb usb3: Manufacturer: Linux 2.6.26-rc8-mm1 ohci_hcd [ 78.504274] usb usb3: SerialNumber: 0000:00:02.1 [ 78.505228] hub 3-0:1.0: state 7 ports 3 chg 0004 evt 0000 [ 78.505247] hub 3-0:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 78.616668] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5 [ 78.624057] ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS [ 78.662941] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 78.680096] usb 3-2: new full speed USB device using ohci_hcd and address 2 [ 78.820050] ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS [ 78.926093] usb 3-2: skipped 1 descriptor after interface [ 78.929074] usb 3-2: default language 0x0409 [ 78.939182] usb 3-2: uevent [ 78.939211] usb 3-2: usb_probe_device [ 78.939217] usb 3-2: configuration #1 chosen from 1 choice [ 78.943080] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 78.943116] usb 3-2:1.0: uevent [ 78.943305] usb 3-2: adding 3-2:1.1 (config #1, interface 1) [ 78.943333] usb 3-2:1.1: uevent [ 78.943459] usb 3-2: adding 3-2:1.2 (config #1, interface 2) [ 78.943487] usb 3-2:1.2: uevent [ 78.943507] drivers/usb/core/inode.c: creating file '002' [ 78.943595] usb 3-2: New USB device found, idVendor=049f, idProduct=0086 [ 78.943600] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 78.943605] usb 3-2: Product: Bluetooth by hp [ 78.943609] usb 3-2: Manufacturer: ACTIONTEC [ 78.943616] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0004 [ 79.016031] ohci_hcd 0000:00:02.0: auto-stop root hub [ 79.016070] Marking TSC unstable due to cpufreq changes [ 79.032333] libusual 1-1:1.0: usb_probe_interface [ 79.032351] libusual 1-1:1.0: usb_probe_interface - got id [ 79.040015] libusual 1-3:1.0: usb_probe_interface [ 79.040015] libusual 1-3:1.0: usb_probe_interface - got id [ 79.040015] usbcore: registered new interface driver libusual [ 79.052014] Initializing USB Mass Storage driver... [ 79.052014] usb-storage 1-1:1.0: usb_probe_interface [ 79.052014] usb-storage 1-1:1.0: usb_probe_interface - got id [ 79.056013] scsi2 : SCSI emulation for USB Mass Storage devices [ 79.056013] usb-storage 1-3:1.0: usb_probe_interface [ 79.056013] usb-storage 1-3:1.0: usb_probe_interface - got id [ 79.056013] usb-storage: device found at 2 [ 79.056013] usb-storage: waiting for device to settle before scanning [ 79.056479] scsi3 : SCSI emulation for USB Mass Storage devices [ 79.058450] usbcore: registered new interface driver usb-storage [ 79.058460] USB Mass Storage support registered. [ 79.058933] usb-storage: device found at 3 [ 79.058937] usb-storage: waiting for device to settle before scanning [ 79.088007] Bluetooth: Core ver 2.12 [ 79.088007] NET: Registered protocol family 31 [ 79.088007] Bluetooth: HCI device and connection manager initialized [ 79.088007] Bluetooth: HCI socket layer initialized [ 79.100013] Bluetooth: HCI USB driver ver 2.9 [ 79.100013] hci_usb 3-2:1.0: usb_probe_interface [ 79.100013] hci_usb 3-2:1.0: usb_probe_interface - got id [ 79.100013] hci_usb 3-2:1.2: usb_probe_interface [ 79.100013] hci_usb 3-2:1.2: usb_probe_interface - got id [ 79.100013] usbcore: registered new interface driver hci_usb [ 80.816027] hub 2-0:1.0: hub_suspend [ 80.816041] usb usb2: bus auto-suspend [ 80.816048] ohci_hcd 0000:00:02.0: suspend root hub [ 82.732273] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [ 82.732291] ReiserFS: sda1: using ordered data mode [ 82.743892] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 82.745892] ReiserFS: sda1: checking transaction log (sda1) [ 82.773123] ReiserFS: sda1: Using r5 hash to sort names [ 84.052354] usb-storage: device scan complete [ 84.056316] usb-storage: device scan complete [ 84.057203] scsi 3:0:0:0: Direct-Access OCZ RALLY2_TURBO 1100 PQ: 0 ANSI: 0 CCS [ 84.534082] scsi 2:0:0:0: Direct-Access ST350064 1A 3.AA PQ: 0 ANSI: 0 [ 84.545949] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 84.546934] sd 2:0:0:0: [sdb] Write Protect is off [ 84.546941] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 [ 84.546945] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 84.547808] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 84.548806] sd 2:0:0:0: [sdb] Write Protect is off [ 84.548812] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 [ 84.548816] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 84.548824] sdb: sdb1 [ 84.563025] sd 2:0:0:0: [sdb] Attached SCSI disk [ 84.563147] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 84.564193] sd 3:0:0:0: [sdc] 8028160 512-byte hardware sectors (4110 MB) [ 84.564940] sd 3:0:0:0: [sdc] Write Protect is off [ 84.564947] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 84.564951] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 84.566974] sd 3:0:0:0: [sdc] 8028160 512-byte hardware sectors (4110 MB) [ 84.567814] sd 3:0:0:0: [sdc] Write Protect is off [ 84.567820] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 84.567824] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 84.567830] sdc: sdc1 [ 84.568646] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 84.568756] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 85.106147] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK aLlcpus showMem Nice powerOff showPc show-all-timers(Q) unRaw Sync showTasks Unmount shoW-blocked-tasks [ 86.241609] usb usb2: usb auto-resume [ 86.241620] ohci_hcd 0000:00:02.0: resume root hub [ 86.271450] Bluetooth: L2CAP ver 2.9 [ 86.271454] Bluetooth: L2CAP socket layer initialized [ 86.320026] hub 2-0:1.0: hub_resume [ 86.323614] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 86.390009] Bluetooth: RFCOMM socket layer initialized [ 86.390036] Bluetooth: RFCOMM TTY layer initialized [ 86.390040] Bluetooth: RFCOMM ver 1.8 [ 86.735929] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 86.735936] Bluetooth: BNEP filters: protocol multicast [ 87.448022] ohci_hcd 0000:00:02.0: auto-stop root hub [ 88.816029] hub 2-0:1.0: hub_suspend [ 88.816041] usb usb2: bus auto-suspend [ 88.816047] ohci_hcd 0000:00:02.0: suspend root hub [ 89.878692] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 91.044641] Adding 2843496k swap on /dev/sda3. Priority:100 extents:1 across:2843496k [ 94.417554] snd_ac97_codec: Unknown parameter `power_save' [ 94.419303] snd_intel8x0: Unknown symbol snd_ac97_pcm_close [ 94.419594] snd_intel8x0: Unknown symbol snd_ac97_resume [ 94.420728] snd_intel8x0: Unknown symbol snd_ac97_pcm_open [ 94.421037] snd_intel8x0: Unknown symbol snd_ac97_set_rate [ 94.421188] snd_intel8x0: Unknown symbol snd_ac97_update_bits [ 94.421351] snd_intel8x0: Unknown symbol snd_ac97_mixer [ 94.421563] snd_intel8x0: Unknown symbol snd_ac97_bus [ 94.422012] snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules [ 94.422323] snd_intel8x0: Unknown symbol snd_ac97_suspend [ 94.423747] snd_intel8x0: Unknown symbol snd_ac97_get_short_name [ 94.424195] snd_intel8x0: Unknown symbol snd_ac97_pcm_assign [ 94.425340] snd_intel8x0: Unknown symbol snd_ac97_tune_hardware [ 94.453909] snd_ac97_codec: Unknown parameter `power_save' [ 94.455615] snd_intel8x0m: Unknown symbol snd_ac97_resume [ 94.456709] snd_intel8x0m: Unknown symbol snd_ac97_mixer [ 94.456922] snd_intel8x0m: Unknown symbol snd_ac97_bus [ 94.457487] snd_intel8x0m: Unknown symbol snd_ac97_suspend [ 94.459744] snd_intel8x0m: Unknown symbol snd_ac97_write [ 269.224276] BUG: unable to handle kernel paging request at ffffe20003480000 [ 269.224291] IP: [] copy_page_range+0x520/0x760 [ 269.224306] PGD 1102067 PUD 1103067 PMD 0 [ 269.224315] Oops: 0000 [1] SMP [ 269.224321] last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:02:04.1/resource [ 269.224327] CPU 0 [ 269.224331] Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device bnep rfcomm l2cap hci_usb bluetooth usb_storage libusual joydev psmouse serio_raw ac97_bus snd_pcm snd_timer snd ohci_hcd ehci_hcd snd_page_alloc usbcore evdev [ 269.224368] Pid: 3032, comm: X Not tainted 2.6.26-rc8-mm1 #17 [ 269.224373] RIP: 0010:[] [] copy_page_range+0x520/0x760 [ 269.224383] RSP: 0018:ffff81002d419d08 EFLAGS: 00010286 [ 269.224388] RAX: 0000000003480000 RBX: 80000000f0000017 RCX: ffffe20003480000 [ 269.224393] RDX: 0000000000780000 RSI: ffff810000000000 RDI: ffffe20000a324b0 [ 269.224399] RBP: 0000000000000000 R08: ffff81002eb5ed40 R09: 0000000000000000 [ 269.224404] R10: 0000000000000000 R11: ffffffff803918d0 R12: ffff81002e9cc4d8 [ 269.224409] R13: 00007f850429b000 R14: ffff81002d44f4d8 R15: 00007f8504400000 [ 269.224415] FS: 00007f850af6e6f0(0000) GS:ffffffff806fe600(0000) knlGS:0000000000000000 [ 269.224420] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 269.224425] CR2: ffffe20003480000 CR3: 000000002d434000 CR4: 00000000000006e0 [ 269.224430] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 269.224435] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 269.224441] Process X (pid: 3032, threadinfo ffff81002d418000, task ffff81002e9ae100) [ 269.224445] Stack: ffff81002d419dcc ffffe20000a324b0 ffffe200009e7158 ffff81002e8f8728 [ 269.224457] ffff81003f11a780 ffff81003e78e4c0 ffff81002d4347f8 ffff81002e9d27f8 [ 269.224465] 00007f850829b000 00007f850829b000 ffff81002d42c108 ffff81002d44e108 [ 269.224473] Call Trace: [ 269.224495] [] dup_mm+0x26b/0x3c0 [ 269.224507] [] copy_process+0xc2c/0x1210 [ 269.224518] [] do_fork+0x73/0x310 [ 269.224526] [] sys_rt_sigaction+0x8e/0xd0 [ 269.224536] [] system_call_after_swapgs+0x7b/0x80 [ 269.224542] [] ptregscall_common+0x67/0xb0 [ 269.224552] [ 269.224555] [ 269.224557] Code: 00 00 48 b9 00 00 00 00 00 e2 ff ff 48 21 d8 48 c1 e8 0c 48 8d 14 c5 00 00 00 00 48 c1 e0 06 48 29 d0 48 01 c1 0f 84 10 ff ff ff <48> 8b 01 48 89 ca f6 c4 40 74 04 48 8b 51 10 90 ff 42 08 90 ff [ 269.224609] RIP [] copy_page_range+0x520/0x760 [ 269.224617] RSP [ 269.224621] CR2: ffffe20003480000 [ 269.224632] ---[ end trace 9eb0c4eca26235e1 ]---