| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 7 Jul 2008 23:54:24 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 6/10] ide: define MAX_HWIFS in <linux/ide.h>
* Now that ide_hwif_t instances are allocated dynamically
the difference between MAX_HWIFS == 2 and MAX_HWIFS == 10
is ~100 bytes (x86-32) so use MAX_HWIFS == 10 on all archs
except these ones that use MAX_HWIFS == 1.
* Define MAX_HWIFS in <linux/ide.h> instead of <asm/ide.h>.
[ Please note that avr32/cris/v850 have no <asm/ide.h>
and alpha/ia64/sh always define CONFIG_IDE_MAX_HWIFS. ]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
this patch depends on arch/ppc/ removal (already in linux-next)
include/asm-arm/ide.h | 4 ----
include/asm-blackfin/ide.h | 2 --
include/asm-frv/ide.h | 4 ----
include/asm-h8300/ide.h | 2 --
include/asm-m32r/ide.h | 8 --------
include/asm-m68k/ide.h | 4 ----
include/asm-mips/mach-generic/ide.h | 8 --------
include/asm-mn10300/ide.h | 4 ----
include/asm-parisc/ide.h | 4 ----
include/asm-powerpc/ide.h | 8 --------
include/asm-sparc/ide.h | 3 ---
include/asm-sparc64/ide.h | 8 --------
include/asm-x86/ide.h | 9 ---------
include/asm-xtensa/ide.h | 5 -----
include/linux/ide.h | 8 ++++++++
15 files changed, 8 insertions(+), 73 deletions(-)
Index: b/include/asm-arm/ide.h
===================================================================
--- a/include/asm-arm/ide.h
+++ b/include/asm-arm/ide.h
@@ -13,10 +13,6 @@
#ifdef __KERNEL__
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 4
-#endif
-
#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
Index: b/include/asm-blackfin/ide.h
===================================================================
--- a/include/asm-blackfin/ide.h
+++ b/include/asm-blackfin/ide.h
@@ -17,8 +17,6 @@
#ifdef __KERNEL__
/****************************************************************************/
-#define MAX_HWIFS 1
-
#include <asm-generic/ide_iops.h>
/****************************************************************************/
Index: b/include/asm-frv/ide.h
===================================================================
--- a/include/asm-frv/ide.h
+++ b/include/asm-frv/ide.h
@@ -18,10 +18,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 8
-#endif
-
/****************************************************************************/
/*
* some bits needed for parts of the IDE subsystem to compile
Index: b/include/asm-h8300/ide.h
===================================================================
--- a/include/asm-h8300/ide.h
+++ b/include/asm-h8300/ide.h
@@ -16,8 +16,6 @@
#ifdef __KERNEL__
/****************************************************************************/
-#define MAX_HWIFS 1
-
#include <asm-generic/ide_iops.h>
/****************************************************************************/
Index: b/include/asm-m32r/ide.h
===================================================================
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -15,14 +15,6 @@
#include <asm/m32r.h>
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS 10
-# else
-#define MAX_HWIFS 2
-# endif
-#endif
-
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
Index: b/include/asm-m68k/ide.h
===================================================================
--- a/include/asm-m68k/ide.h
+++ b/include/asm-m68k/ide.h
@@ -45,10 +45,6 @@
#include <asm/macints.h>
#endif
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 4 /* same as the other archs */
-#endif
-
/*
* Get rid of defs from io.h - ide has its private and conflicting versions
* Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
Index: b/include/asm-mips/mach-generic/ide.h
===================================================================
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -19,14 +19,6 @@
#include <linux/stddef.h>
#include <asm/processor.h>
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS 10
-# else
-#define MAX_HWIFS 6
-# endif
-#endif
-
static __inline__ int ide_probe_legacy(void)
{
#ifdef CONFIG_PCI
Index: b/include/asm-mn10300/ide.h
===================================================================
--- a/include/asm-mn10300/ide.h
+++ b/include/asm-mn10300/ide.h
@@ -23,10 +23,6 @@
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 8
-#endif
-
/*
* some bits needed for parts of the IDE subsystem to compile
*/
Index: b/include/asm-parisc/ide.h
===================================================================
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -13,10 +13,6 @@
#ifdef __KERNEL__
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 2
-#endif
-
#define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id))
#define ide_free_irq(irq,dev_id) free_irq((irq), (dev_id))
#define ide_request_region(from,extent,name) request_region((from), (extent), (name))
Index: b/include/asm-powerpc/ide.h
===================================================================
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -14,14 +14,6 @@
#endif
#include <asm/io.h>
-#ifndef MAX_HWIFS
-#ifdef __powerpc64__
-#define MAX_HWIFS 10
-#else
-#define MAX_HWIFS 8
-#endif
-#endif
-
#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c))
#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c))
#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c))
Index: b/include/asm-sparc/ide.h
===================================================================
--- a/include/asm-sparc/ide.h
+++ b/include/asm-sparc/ide.h
@@ -14,9 +14,6 @@
#include <asm/io.h>
#include <asm/psr.h>
-#undef MAX_HWIFS
-#define MAX_HWIFS 2
-
#define __ide_insl(data_reg, buffer, wcount) \
__ide_insw(data_reg, buffer, (wcount)<<1)
#define __ide_outsl(data_reg, buffer, wcount) \
Index: b/include/asm-sparc64/ide.h
===================================================================
--- a/include/asm-sparc64/ide.h
+++ b/include/asm-sparc64/ide.h
@@ -16,14 +16,6 @@
#include <asm/cacheflush.h>
#include <asm/page.h>
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS 10
-# else
-#define MAX_HWIFS 2
-# endif
-#endif
-
#define __ide_insl(data_reg, buffer, wcount) \
__ide_insw(data_reg, buffer, (wcount)<<1)
#define __ide_outsl(data_reg, buffer, wcount) \
Index: b/include/asm-x86/ide.h
===================================================================
--- a/include/asm-x86/ide.h
+++ b/include/asm-x86/ide.h
@@ -11,15 +11,6 @@
#ifdef __KERNEL__
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS 10
-# else
-#define MAX_HWIFS 6
-# endif
-#endif
-
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
Index: b/include/asm-xtensa/ide.h
===================================================================
--- a/include/asm-xtensa/ide.h
+++ b/include/asm-xtensa/ide.h
@@ -14,11 +14,6 @@
#ifdef __KERNEL__
-
-#ifndef MAX_HWIFS
-# define MAX_HWIFS 1
-#endif
-
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -213,6 +213,14 @@ static inline int __ide_default_irq(unsi
#include <asm/ide.h>
+#ifndef MAX_HWIFS
+#if defined(CONFIG_BLACKFIN) || defined(CONFIG_H8300) || defined(CONFIG_XTENSA)
+# define MAX_HWIFS 1
+#else
+# define MAX_HWIFS 10
+#endif
+#endif
+
#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
#undef MAX_HWIFS
#define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists