[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1216030982.32159.38.camel@yakui_zhao.sh.intel.com>
Date: Mon, 14 Jul 2008 18:23:02 +0800
From: Zhao Yakui <yakui.zhao@...el.com>
To: Andre Prendel <andre_prendel@....de>
Cc: Zhang Rui <rui.zhang@...el.com>, "Rafael J. Wysocki" <rjw@...k.pl>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
kernel-testers@...r.kernel.org, Andi Kleen <andi@...stfloor.org>,
Andrew Morton <akpm@...ux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: ACPI Error under 2.6.26-rc*
On Mon, 2008-07-14 at 10:09 +0200, Andre Prendel wrote:
> On Fri, Jul 11, 2008 at 09:28:02AM +0800, Zhang Rui wrote:
> > On Fri, 2008-07-11 at 09:20 +0800, Zhang Rui wrote:
> > > On Fri, 2008-07-11 at 04:55 +0800, Rafael J. Wysocki wrote:
> > > > [Adding CCs.]
> > > >
> > > > On Wednesday, 9 of July 2008, Andre Prendel wrote:
> > > > > Hi,
> > > > >
> > > > > I have had some ACPI Problems working under the 2.6.26-rc's in the
> > > > last weeks.
> > > > > Power off does not work well. "System halted" is the last output,
> > > > but power is
> > > > > not switch off. The lastest stable kernel (2.6.25.10) works fine for
> > > > me. After
> > > > > that I tried 2.6.26-rc1 and the error occurs. AFAIR I had these
> > > > problems with
> > > > > all 2.6.26-rc's until 2.6.26-rc8-git4. I did not tested newer ones.
> > > > >
> > > > > Dmesg output is attached.
> > > > >
> > > > > Andre
> > > > >
> > > > > ----------------------------------
> > > > > [ 0.000000] Linux version 2.6.26-rc1 (andre@...ntu) (gcc version
> > > > 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #8 SMP Tue Jul 8
> > > > 22:28:14 CEST 2008
> > > > > [ 0.000000] BIOS-provided physical RAM map:
> > > > > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
> > > > (usable)
> > > > > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
> > > > (reserved)
> > > > > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
> > > > (reserved)
> > > > > [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000
> > > > (usable)
> > > > > [ 0.000000] BIOS-e820: 0000000021ff0000 - 0000000021ff8000 (ACPI
> > > > data)
> > > > > [ 0.000000] BIOS-e820: 0000000021ff8000 - 0000000022000000 (ACPI
> > > > NVS)
> > > > > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
> > > > (reserved)
> > > > > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
> > > > (reserved)
> > > > > [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000
> > > > (reserved)
> > > > > [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000
> > > > (reserved)
> > > > > [ 0.000000] x86: PAT support disabled.
> > > > > [ 0.000000] 511MB LOWMEM available.
> > > > > [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of
> > > > 256 used
> > > > > [ 0.000000] Zone PFN ranges:
> > > > > [ 0.000000] DMA 0 -> 4096
> > > > > [ 0.000000] Normal 4096 -> 131056
> > > > > [ 0.000000] Movable zone start PFN for each node
> > > > > [ 0.000000] early_node_map[1] active PFN ranges
> > > > > [ 0.000000] 0: 0 -> 131056
> > > > > [ 0.000000] On node 0 totalpages: 131056
> > > > > [ 0.000000] DMA zone: 32 pages used for memmap
> > > > > [ 0.000000] DMA zone: 0 pages reserved
> > > > > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> > > > > [ 0.000000] Normal zone: 991 pages used for memmap
> > > > > [ 0.000000] Normal zone: 125969 pages, LIFO batch:31
> > > > > [ 0.000000] Movable zone: 0 pages used for memmap
> > > > > [ 0.000000] DMI 2.3 present.
> > > > > [ 0.000000] ACPI: RSDP 000FA340, 0014 (r0 AMI )
> > > > > [ 0.000000] ACPI: 21FF0000, 0000 (r0
> > > > 0 0)
> > > > > [ 0.000000] ACPI Error (tbutils-0472): Invalid length 0x0 in
> > > > RSDT/XSDT [20080321]
> > >
> > > Please attach the acpidump output using the latest pmtools at
> > > http://www.lesswatts.org/patches/linux_acpi/
> > >
> > Please also attach the dmesg output of a working kernel.
>
> Hello Rui,
>
> that's quite strange. Booting the system to get an acpidump I have
> looked at the dmesg output and there is no ACPI Error like the one
> above. There is only an ACPI Exeption.
>
> [...]
> Jul 13 22:00:18 ubuntu kernel: [ 0.104111] ACPI: Core revision 20080321
> Jul 13 22:00:18 ubuntu kernel: [ 0.104259] ACPI Exception
> (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI
> tables [20080321]
> [...]
>
Will you please boot the 2.6.26-rc* kernel with the option of acpi=off
and attach the output of acpidump?
>>From the 2.6.25.10 kernel log it seems that the ACPI Data/NVS region is
located in the following e820 memory region:
> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
>BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
>>From the 2.6.26-rc* kernel log it seems that the ACPI Data/NVS region is
located in the following e820 memory region:
BIOS-e820: 0000000021ff0000 - 0000000021ff8000 (ACPI data)
BIOS-e820: 0000000021ff8000 - 0000000022000000 (ACPI NVS)
Please also confirm whether the kernel 2.6.25.10 and 2.6.26-rc* use the
same bios.
> Booting again I found the error again
>
> [...]
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] ACPI Error
> (tbutils-0472): Invalid length 0x0 in RSDT/XSDT [20080321]
> [...]
>
> and acpidump says:
> root@...ntu:/home/andre/src/acpi/pmtools-20071116/acpidump#
> ./acpidumpACPI tables were not found. If you know location of RSD PTR
> table (from dmesg, etc), supply it with either --addr or -a option
>
> Linux 2.6.25.10 always works.
Will you please boot the working kernel and attach the output of
acpidump?
>
> I attach all the dmesg outputs and hope this helps.
>
> May be the BIOS is a bit buggy. It is an AMIBIOS from 2001.
>
> > > thanks,
> > > rui
>
> Thanks,
> Andre
>
> ----------------------------------
> dmesg 2.6.25.10 (working)
> ----------------------------------
> Linux version 2.6.25.10-default (andre@...ntu) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #5 Tue Jul 8 21:21:58 CEST 2008
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
> Scan SMP from c0000000 for 1024 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Scan SMP from c00f0000 for 65536 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Entering add_active_range(0, 0, 131056) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 131056
> HighMem 131056 -> 131056
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 131056
> On node 0 totalpages: 131056
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 991 pages used for memmap
> Normal zone: 125969 pages, LIFO batch:31
> HighMem zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> DMI 2.3 present.
> Using APIC driver default
> ACPI: RSDP 000FA340, 0014 (r0 AMI )
> ACPI: RSDT 1FFF0000, 0028 (r1 AMIINT SiS735XX 1000 MSFT 100000B)
> ACPI: FACP 1FFF0030, 0074 (r1 AMIINT SiS735XX 1000 MSFT 100000B)
> ACPI: DSDT 1FFF0100, 33C2 (r1 SiS 735 100 MSFT 100000D)
> ACPI: FACS 1FFF8000, 0040
> ACPI: PM-Timer IO Port: 0x808
> Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
> Kernel command line: root=/dev/mapper/lvm--sdb-root ro
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> mapped APIC to ffffb000 (01402000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Detected 1659.681 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 511576k/524224k available (1639k kernel code, 12036k reserved, 753k data, 216k init, 0k highmem)
> virtual kernel memory layout:
> fixmap : 0xfffa7000 - 0xfffff000 ( 352 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
> lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
> .init : 0xc035a000 - 0xc0390000 ( 216 kB)
> .data : 0xc0299fd4 - 0xc03566a0 ( 753 kB)
> .text : 0xc0100000 - 0xc0299fd4 (1639 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> CPA: page pool initialized 1 of 1 pages preallocated
> Calibrating delay using timer specific routine.. 3320.81 BogoMIPS (lpj=6641635)
> Security Framework initialized
> Mount-cache hash table entries: 512
> CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Compat vDSO mapped to ffffe000.
> CPU: AMD Athlon(tm) XP 2000+ stepping 01
> Checking 'hlt' instruction... OK.
> Freeing SMP alternatives: 0k freed
> ACPI: Core revision 20070126
> ACPI: setting ELCR to 0200 (from 0c20)
> net_namespace: 540 bytes
> NET: Registered protocol family 16
> No dock devices found.
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S5)
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:02.0: Enabling SiS 96x SMBus
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15)
> ACPI: Power Resource [URP1] (off)
> ACPI: Power Resource [URP2] (off)
> ACPI: Power Resource [FDDP] (off)
> ACPI: Power Resource [LPTP] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 11 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 3.00 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: 0xcde00000-0xcfefffff
> PREFETCH window: 0x00000000c5c00000-0x00000000cdcfffff
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 4484k freed
> Machine check exception polling timer started.
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> type=2000 audit(1215982615.656:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:01:00.0: Boot video device
> Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
> Hangcheck: Using get_cycles().
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> brd: module loaded
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as /class/input/input0
> NET: Registered protocol family 1
> Using IPI Shortcut mode
> registered taskstats version 1
> Freeing unused kernel memory: 216k freed
> fuse init (API version 7.9)
> ACPI: ACPI0007:00 is registered as cooling_device0
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@...hat.com
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
> ohci_hcd 0000:00:02.2: OHCI Host Controller
> ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:02.2: irq 10, io mem 0xcfffe000
> Uniform Multi-Platform E-IDE driver
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> USB Universal Host Controller Interface driver v3.0
> input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 3 ports detected
> SIS5513: IDE controller (0x1039:0x5513 rev 0xd0) at PCI slot 0000:00:02.5
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS735 ATA 100 (2nd gen) controller
> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
> Probing IDE interface ide0...
> hda: IC35L060AVV207-0, ATA DISK drive
> hdb: IC35L060AVV207-0, ATA DISK drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdb: UDMA/100 mode selected
> Probing IDE interface ide1...
> hdc: TSSTcorpCD-R/RW SH-R522C, ATAPI CD/DVD-ROM drive
> hdd: TSSTcorpDVD-ROM TS-H352A, ATAPI CD/DVD-ROM drive
> hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdc: UDMA/33 mode selected
> hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdd: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
> 8139cp 0000:00:0d.0: Try the "8139too" driver instead.
> 8139too Fast Ethernet driver 0.9.28
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
> eth0: RealTek RTL8139 at 0xe0876f00, 00:10:b5:11:4a:b0, IRQ 10
> eth0: Identified 8139 chip type 'RTL-8139C'
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:13.0: UHCI Host Controller
> uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:13.0: irq 11, io base 0x0000cc00
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
> ehci_hcd 0000:00:13.2: EHCI Host Controller
> ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
> ehci_hcd 0000:00:13.2: irq 10, io mem 0xcfffde00
> ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 4 ports detected
> ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
> ohci_hcd 0000:00:02.3: OHCI Host Controller
> ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:02.3: irq 5, io mem 0xcffff000
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 3 ports detected
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:13.1: UHCI Host Controller
> uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:13.1: irq 11, io base 0x0000d000
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> hda: max request size: 512KiB
> hda: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
> hdb: max request size: 512KiB
> hdb: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63
> hdb: cache flushes supported
> hdb: hdb1 hdb2
> hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
> hub 3-0:1.0: unable to enumerate USB device on port 3
> usb 5-1: new full speed USB device using uhci_hcd and address 2
> usb 5-1: configuration #1 chosen from 1 choice
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> eth0: link down
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> Linux agpgart interface v0.103
> agpgart: Detected SiS chipset - id:1845
> agpgart: AGP aperture is 64M @ 0xd0000000
> input: Power Button (FF) as /class/input/input2
> sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (CM) as /class/input/input3
> ACPI: Sleep Button (CM) [SLPB]
> sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
> Real Time Clock Driver v1.12ac
> ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
> IT8705 SuperIO detected.
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> intel8x0_measure_ac97_clock: measured 55826 usecs
> intel8x0: clocking to 48000
> loop: module loaded
> lp0: using parport0 (interrupt-driven).
> Adding 1048568k swap on /dev/mapper/lvm--sdb-swap. Priority:-1 extents:1 across:1048568k
> EXT3 FS on dm-1, internal journal
> usb 3-1: new high speed USB device using ehci_hcd and address 3
> usb 3-1: configuration #1 chosen from 1 choice
> Initializing USB Mass Storage driver...
> scsi0 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> usb-storage: device found at 3
> usb-storage: waiting for device to settle before scanning
> USB Mass Storage support registered.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hdb1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> scsi 0:0:0:0: Direct-Access WDC WD40 0UE-22HCT0 0811 PQ: 0 ANSI: 0
> usb-storage: device scan complete
> Driver 'sd' needs updating - please use bus_type methods
> sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
> sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
> sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda:<6>ppdev: user-space parallel port driver
> sda1
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
>
> ----------------------------------
> acpidump 2.6.26-rc1 (ACPI Exception)
> ----------------------------------
>
> Jul 13 22:00:18 ubuntu syslogd 1.4.1#21ubuntu3: restart.
> Jul 13 22:00:18 ubuntu kernel: Inspecting /boot/System.map-2.6.26-rc1
> Jul 13 22:00:18 ubuntu kernel: Loaded 30176 symbols from /boot/System.map-2.6.26-rc1.
> Jul 13 22:00:18 ubuntu kernel: Symbols match kernel version 2.6.26.
> Jul 13 22:00:18 ubuntu kernel: No module symbols loaded - kernel modules not enabled.
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Linux version 2.6.26-rc1 (andre@...ntu) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #8 SMP Tue Jul 8 22:28:14 CEST 2008
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-provided physical RAM map:
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] x86: PAT support disabled.
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] 511MB LOWMEM available.
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Zone PFN ranges:
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] DMA 0 -> 4096
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Normal 4096 -> 131056
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Movable zone start PFN for each node
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] early_node_map[1] active PFN ranges
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] 0: 0 -> 131056
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] DMI 2.3 present.
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] ACPI: RSDP 000FA340, 0014 (r0 AMI )
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] ACPI: 2FFF0000, 80000000 (r0 0 0)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] PERCPU: Allocating 39184 bytes of per cpu data
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Kernel command line: root=/dev/mapper/lvm--sdb-root ro
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Enabling fast FPU save and restore... done.
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Initializing CPU#0
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 0.000000] Detected 1659.680 MHz processor.
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] Console: colour VGA+ 80x25
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] console [tty0] enabled
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] Memory: 501880k/524224k available (2364k kernel code, 21736k reserved, 1107k data, 248k init, 0k highmem)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] virtual kernel memory layout:
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] .init : 0xc046b000 - 0xc04a9000 ( 248 kB)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] .data : 0xc034f1e1 - 0xc0464040 (1107 kB)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] .text : 0xc0100000 - 0xc034f1e1 (2364 kB)
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> Jul 13 22:00:18 ubuntu kernel: [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> Jul 13 22:00:18 ubuntu kernel: [ 0.084007] Calibrating delay using timer specific routine.. 3321.02 BogoMIPS (lpj=6642044)
> Jul 13 22:00:18 ubuntu kernel: [ 0.084161] Security Framework initialized
> Jul 13 22:00:18 ubuntu kernel: [ 0.084234] SELinux: Disabled at boot.
> Jul 13 22:00:18 ubuntu kernel: [ 0.084314] Mount-cache hash table entries: 512
> Jul 13 22:00:18 ubuntu kernel: [ 0.084592] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
> Jul 13 22:00:18 ubuntu kernel: [ 0.084665] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> Jul 13 22:00:18 ubuntu kernel: [ 0.084737] CPU: L2 Cache: 256K (64 bytes/line)
> Jul 13 22:00:18 ubuntu kernel: [ 0.084815] Checking 'hlt' instruction... OK.
> Jul 13 22:00:18 ubuntu kernel: [ 0.100347] SMP alternatives: switching to UP code
> Jul 13 22:00:18 ubuntu kernel: [ 0.104042] Freeing SMP alternatives: 11k freed
> Jul 13 22:00:18 ubuntu kernel: [ 0.104111] ACPI: Core revision 20080321
> Jul 13 22:00:18 ubuntu kernel: [ 0.104259] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
> Jul 13 22:00:18 ubuntu kernel: [ 0.104588] weird, boot CPU (#0) not listedby the BIOS.
> Jul 13 22:00:18 ubuntu kernel: [ 0.104656] SMP motherboard not detected.
> Jul 13 22:00:18 ubuntu kernel: [ 0.104723] Local APIC not detected. Using dummy APIC emulation.
> Jul 13 22:00:18 ubuntu kernel: [ 0.104791] SMP disabled
> Jul 13 22:00:18 ubuntu kernel: [ 0.104939] Brought up 1 CPUs
> Jul 13 22:00:18 ubuntu kernel: [ 0.105003] Total of 1 processors activated (3321.02 BogoMIPS).
> Jul 13 22:00:18 ubuntu kernel: [ 0.105470] net_namespace: 644 bytes
> Jul 13 22:00:18 ubuntu kernel: [ 0.105788] NET: Registered protocol family 16
> Jul 13 22:00:18 ubuntu kernel: [ 0.106060] No dock devices found.
> Jul 13 22:00:18 ubuntu kernel: [ 0.107539] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
> Jul 13 22:00:18 ubuntu kernel: [ 0.107611] PCI: Using configuration type 1 for base access
> Jul 13 22:00:18 ubuntu kernel: [ 0.107680] Setting up standard PCI resources
> Jul 13 22:00:18 ubuntu kernel: [ 0.109342] ACPI: Interpreter disabled.
> Jul 13 22:00:18 ubuntu kernel: [ 0.109412] Linux Plug and Play Support v0.97 (c) Adam Belay
> Jul 13 22:00:18 ubuntu kernel: [ 0.109524] pnp: PnP ACPI: disabled
> Jul 13 22:00:18 ubuntu kernel: [ 0.109824] SCSI subsystem initialized
> Jul 13 22:00:18 ubuntu kernel: [ 0.110115] PCI: Probing PCI hardware
> Jul 13 22:00:18 ubuntu kernel: [ 0.110389] pci 0000:00:02.0: Enabling SiS 96x SMBus
> Jul 13 22:00:18 ubuntu kernel: [ 0.111813] PCI: Using IRQ router SIS [1039/0018] at 0000:00:02.0
> Jul 13 22:00:18 ubuntu kernel: [ 0.111905] PCI: Found IRQ 11 for device 0000:00:02.1
> Jul 13 22:00:18 ubuntu kernel: [ 0.111987] PCI: Sharing IRQ 11 with 0000:00:13.1
> Jul 13 22:00:18 ubuntu kernel: [ 0.112307] NET: Registered protocol family 8
> Jul 13 22:00:18 ubuntu kernel: [ 0.112374] NET: Registered protocol family 20
> Jul 13 22:00:18 ubuntu kernel: [ 0.113075] PCI: Bridge: 0000:00:01.0
> Jul 13 22:00:18 ubuntu kernel: [ 0.113141] IO window: disabled.
> Jul 13 22:00:18 ubuntu kernel: [ 0.113209] MEM window: 0xcde00000-0xcfefffff
> Jul 13 22:00:18 ubuntu kernel: [ 0.113278] PREFETCH window: 0x00000000c5c00000-0x00000000cdcfffff
> Jul 13 22:00:18 ubuntu kernel: [ 0.113376] NET: Registered protocol family 2
> Jul 13 22:00:18 ubuntu kernel: [ 0.113557] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 0.113911] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 0.114271] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 0.114612] TCP: Hash tables configured (established 16384 bind 16384)
> Jul 13 22:00:18 ubuntu kernel: [ 0.114684] TCP reno registered
> Jul 13 22:00:18 ubuntu kernel: [ 0.114888] NET: Registered protocol family 1
> Jul 13 22:00:18 ubuntu kernel: [ 0.115127] checking if image is initramfs... it is
> Jul 13 22:00:18 ubuntu kernel: [ 1.445757] Freeing initrd memory: 12959k freed
> Jul 13 22:00:18 ubuntu kernel: [ 1.446360] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> Jul 13 22:00:18 ubuntu kernel: [ 1.446924] audit: initializing netlink socket (disabled)
> Jul 13 22:00:18 ubuntu kernel: [ 1.447015] type=2000 audit(1215986400.444:1): initialized
> Jul 13 22:00:18 ubuntu kernel: [ 1.456677] VFS: Disk quotas dquot_6.5.1
> Jul 13 22:00:18 ubuntu kernel: [ 1.456864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Jul 13 22:00:18 ubuntu kernel: [ 1.457295] msgmni has been set to 1005 for ipc namespace c0442b40
> Jul 13 22:00:18 ubuntu kernel: [ 1.457527] io scheduler noop registered
> Jul 13 22:00:18 ubuntu kernel: [ 1.457594] io scheduler anticipatory registered
> Jul 13 22:00:18 ubuntu kernel: [ 1.457661] io scheduler deadline registered
> Jul 13 22:00:18 ubuntu kernel: [ 1.457739] io scheduler cfq registered (default)
> Jul 13 22:00:18 ubuntu kernel: [ 1.490761] Real Time Clock Driver v1.12ac
> Jul 13 22:00:18 ubuntu kernel: [ 1.490941] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> Jul 13 22:00:18 ubuntu kernel: [ 1.491190] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Jul 13 22:00:18 ubuntu kernel: [ 1.491445] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> Jul 13 22:00:18 ubuntu kernel: [ 1.493693] brd: module loaded
> Jul 13 22:00:18 ubuntu kernel: [ 1.493819] Driver 'sd' needs updating - please use bus_type methods
> Jul 13 22:00:18 ubuntu kernel: [ 1.494168] scsi0 : pata_sis
> Jul 13 22:00:18 ubuntu kernel: [ 1.494461] scsi1 : pata_sis
> Jul 13 22:00:18 ubuntu kernel: [ 1.494593] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
> Jul 13 22:00:18 ubuntu kernel: [ 1.494666] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
> Jul 13 22:00:18 ubuntu kernel: [ 1.680809] ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
> Jul 13 22:00:18 ubuntu kernel: [ 1.680883] ata1.00: 120103200 sectors, multi 16: LBA48
> Jul 13 22:00:18 ubuntu kernel: [ 1.681341] ata1.01: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
> Jul 13 22:00:18 ubuntu kernel: [ 1.681412] ata1.01: 120103200 sectors, multi 16: LBA48
> Jul 13 22:00:18 ubuntu kernel: [ 1.704621] ata1.00: configured for UDMA/100
> Jul 13 22:00:18 ubuntu kernel: [ 1.728639] ata1.01: configured for UDMA/100
> Jul 13 22:00:18 ubuntu kernel: [ 1.892451] ata2.00: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS04, max UDMA/33
> Jul 13 22:00:18 ubuntu kernel: [ 1.892539] ata2.01: ATAPI: TSSTcorpDVD-ROM TS-H352A, TS03, max UDMA/33
> Jul 13 22:00:18 ubuntu kernel: [ 1.908338] ata2.00: configured for UDMA/33
> Jul 13 22:00:18 ubuntu kernel: [ 1.924328] ata2.01: configured for UDMA/33
> Jul 13 22:00:18 ubuntu kernel: [ 1.924564] scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
> Jul 13 22:00:18 ubuntu kernel: [ 1.924899] sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 1.924991] sd 0:0:0:0: [sda] Write Protect is off
> Jul 13 22:00:18 ubuntu kernel: [ 1.925088] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:00:18 ubuntu kernel: [ 1.925253] sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 1.925339] sd 0:0:0:0: [sda] Write Protect is off
> Jul 13 22:00:18 ubuntu kernel: [ 1.925433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:00:18 ubuntu kernel: [ 1.925527] sda: sda1 sda2 sda3 sda4 < sda5 >
> Jul 13 22:00:18 ubuntu kernel: [ 1.965700] sda3: <minix: sda6 sda7 sda8 >
> Jul 13 22:00:18 ubuntu kernel: [ 1.966443] sd 0:0:0:0: [sda] Attached SCSI disk
> Jul 13 22:00:18 ubuntu kernel: [ 1.966625] sd 0:0:0:0: Attached scsi generic sg0 type 0
> Jul 13 22:00:18 ubuntu kernel: [ 1.966795] scsi 0:0:1:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
> Jul 13 22:00:18 ubuntu kernel: [ 1.967053] sd 0:0:1:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 1.967144] sd 0:0:1:0: [sdb] Write Protect is off
> Jul 13 22:00:18 ubuntu kernel: [ 1.967241] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:00:18 ubuntu kernel: [ 1.967394] sd 0:0:1:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 1.967480] sd 0:0:1:0: [sdb] Write Protect is off
> Jul 13 22:00:18 ubuntu kernel: [ 1.967575] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:00:18 ubuntu kernel: [ 1.967669] sdb: sdb1 sdb2
> Jul 13 22:00:18 ubuntu kernel: [ 1.977108] sd 0:0:1:0: [sdb] Attached SCSI disk
> Jul 13 22:00:18 ubuntu kernel: [ 1.977279] sd 0:0:1:0: Attached scsi generic sg1 type 0
> Jul 13 22:00:18 ubuntu kernel: [ 1.978726] scsi 1:0:0:0: CD-ROM TSSTcorp CD-R/RW SH-R522C TS04 PQ: 0 ANSI: 5
> Jul 13 22:00:18 ubuntu kernel: [ 1.978999] scsi 1:0:0:0: Attached scsi generic sg2 type 5
> Jul 13 22:00:18 ubuntu kernel: [ 1.979538] scsi 1:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H352A TS03 PQ: 0 ANSI: 5
> Jul 13 22:00:18 ubuntu kernel: [ 1.979800] scsi 1:0:1:0: Attached scsi generic sg3 type 5
> Jul 13 22:00:18 ubuntu kernel: [ 1.980086] PNP: No PS/2 controller found. Probing ports directly.
> Jul 13 22:00:18 ubuntu kernel: [ 1.980446] serio: i8042 KBD port at 0x60,0x64 irq 1
> Jul 13 22:00:18 ubuntu kernel: [ 1.980519] serio: i8042 AUX port at 0x60,0x64 irq 12
> Jul 13 22:00:18 ubuntu kernel: [ 1.980787] mice: PS/2 mouse device common for all mice
> Jul 13 22:00:18 ubuntu kernel: [ 1.981154] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@...hat.com
> Jul 13 22:00:18 ubuntu kernel: [ 1.981809] TCP cubic registered
> Jul 13 22:00:18 ubuntu kernel: [ 1.981905] Using IPI No-Shortcut mode
> Jul 13 22:00:18 ubuntu kernel: [ 1.982665] Freeing unused kernel memory: 248k freed
> Jul 13 22:00:18 ubuntu kernel: [ 2.010364] input: AT Translated Set 2 keyboard as /class/input/input0
> Jul 13 22:00:18 ubuntu kernel: [ 2.208694] fuse init (API version 7.9)
> Jul 13 22:00:18 ubuntu kernel: [ 2.225286] thermal: Unknown symbol acpi_processor_set_thermal_limit
> Jul 13 22:00:18 ubuntu kernel: [ 3.236759] Uniform Multi-Platform E-IDE driver
> Jul 13 22:00:18 ubuntu kernel: [ 3.236840] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Jul 13 22:00:18 ubuntu kernel: [ 3.284586] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> Jul 13 22:00:18 ubuntu kernel: [ 3.306971] 8139too Fast Ethernet driver 0.9.28
> Jul 13 22:00:18 ubuntu kernel: [ 3.307828] PCI: Found IRQ 10 for device 0000:00:0d.0
> Jul 13 22:00:18 ubuntu kernel: [ 3.307909] PCI: Sharing IRQ 10 with 0000:00:02.7
> Jul 13 22:00:18 ubuntu kernel: [ 3.307982] PCI: Sharing IRQ 10 with 0000:00:13.2
> Jul 13 22:00:18 ubuntu kernel: [ 3.308661] eth0: RealTek RTL8139 at 0xe083cf00, 00:10:b5:11:4a:b0, IRQ 10
> Jul 13 22:00:18 ubuntu kernel: [ 3.365325] usbcore: registered new interface driver usbfs
> Jul 13 22:00:18 ubuntu kernel: [ 3.365431] usbcore: registered new interface driver hub
> Jul 13 22:00:18 ubuntu kernel: [ 3.379135] usbcore: registered new device driver usb
> Jul 13 22:00:18 ubuntu kernel: [ 3.382652] Driver 'sr' needs updating - please use bus_type methods
> Jul 13 22:00:18 ubuntu kernel: [ 3.389771] PCI: Found IRQ 10 for device 0000:00:13.2
> Jul 13 22:00:18 ubuntu kernel: [ 3.389876] PCI: Sharing IRQ 10 with 0000:00:02.7
> Jul 13 22:00:18 ubuntu kernel: [ 3.389944] PCI: Sharing IRQ 10 with 0000:00:0d.0
> Jul 13 22:00:18 ubuntu kernel: [ 3.390036] ehci_hcd 0000:00:13.2: EHCI Host Controller
> Jul 13 22:00:18 ubuntu kernel: [ 3.390144] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
> Jul 13 22:00:18 ubuntu kernel: [ 3.390297] ehci_hcd 0000:00:13.2: irq 10, io mem 0xcfffde00
> Jul 13 22:00:18 ubuntu kernel: [ 3.392621] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
> Jul 13 22:00:18 ubuntu kernel: [ 3.392705] Uniform CD-ROM driver Revision: 3.20
> Jul 13 22:00:18 ubuntu kernel: [ 3.400235] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
> Jul 13 22:00:18 ubuntu kernel: [ 3.400538] usb usb1: configuration #1 chosen from 1 choice
> Jul 13 22:00:18 ubuntu kernel: [ 3.400642] hub 1-0:1.0: USB hub found
> Jul 13 22:00:18 ubuntu kernel: [ 3.400718] hub 1-0:1.0: 4 ports detected
> Jul 13 22:00:18 ubuntu kernel: [ 3.406073] sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
> Jul 13 22:00:18 ubuntu kernel: [ 3.664557] kjournald starting. Commit interval 5 seconds
> Jul 13 22:00:18 ubuntu kernel: [ 3.664647] EXT3-fs: mounted filesystem with ordered data mode.
> Jul 13 22:00:18 ubuntu kernel: [ 3.744264] usb 1-1: new high speed USB device using ehci_hcd and address 2
> Jul 13 22:00:18 ubuntu kernel: [ 3.877727] usb 1-1: configuration #1 chosen from 1 choice
> Jul 13 22:00:18 ubuntu kernel: [ 9.883339] eth0: link down
> Jul 13 22:00:18 ubuntu kernel: [ 11.018244] NET: Registered protocol family 10
> Jul 13 22:00:18 ubuntu kernel: [ 11.018778] lo: Disabled Privacy Extensions
> Jul 13 22:00:18 ubuntu kernel: [ 11.019324] ADDRCONF(NETDEV_UP): eth0: link is not ready
> Jul 13 22:00:18 ubuntu kernel: [ 11.788983] Linux agpgart interface v0.103
> Jul 13 22:00:18 ubuntu kernel: [ 11.946545] agpgart: Detected SiS chipset - id:1845
> Jul 13 22:00:18 ubuntu kernel: [ 11.951174] agpgart: AGP aperture is 64M @ 0xd0000000
> Jul 13 22:00:18 ubuntu kernel: [ 12.216579] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
> Jul 13 22:00:18 ubuntu kernel: [ 12.515478] Initializing USB Mass Storage driver...
> Jul 13 22:00:18 ubuntu kernel: [ 12.519688] scsi2 : SCSI emulation for USB Mass Storage devices
> Jul 13 22:00:18 ubuntu kernel: [ 12.520178] usbcore: registered new interface driver usb-storage
> Jul 13 22:00:18 ubuntu kernel: [ 12.520251] USB Mass Storage support registered.
> Jul 13 22:00:18 ubuntu kernel: [ 12.545827] PCI: Found IRQ 10 for device 0000:00:02.7
> Jul 13 22:00:18 ubuntu kernel: [ 12.545920] PCI: Sharing IRQ 10 with 0000:00:0d.0
> Jul 13 22:00:18 ubuntu kernel: [ 12.545992] PCI: Sharing IRQ 10 with 0000:00:13.2
> Jul 13 22:00:18 ubuntu kernel: [ 12.860811] intel8x0_measure_ac97_clock: measured 55895 usecs
> Jul 13 22:00:18 ubuntu kernel: [ 12.860888] intel8x0: clocking to 48000
> Jul 13 22:00:18 ubuntu kernel: [ 13.040779] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
> Jul 13 22:00:18 ubuntu kernel: [ 13.471151] loop: module loaded
> Jul 13 22:00:18 ubuntu kernel: [ 13.582947] Adding 1048568k swap on /dev/mapper/lvm--sdb-swap. Priority:-1 extents:1 across:1048568k
> Jul 13 22:00:18 ubuntu kernel: [ 14.095419] EXT3 FS on dm-1, internal journal
> Jul 13 22:00:18 ubuntu kernel: [ 16.503407] kjournald starting. Commit interval 5 seconds
> Jul 13 22:00:18 ubuntu kernel: [ 16.503664] EXT3 FS on sdb1, internal journal
> Jul 13 22:00:18 ubuntu kernel: [ 16.503671] EXT3-fs: mounted filesystem with ordered data mode.
> Jul 13 22:00:18 ubuntu kernel: [ 16.533815] kjournald starting. Commit interval 5 seconds
> Jul 13 22:00:18 ubuntu kernel: [ 16.534097] EXT3 FS on dm-2, internal journal
> Jul 13 22:00:18 ubuntu kernel: [ 16.534103] EXT3-fs: mounted filesystem with ordered data mode.
> Jul 13 22:00:18 ubuntu kernel: [ 17.535287] scsi 2:0:0:0: Direct-Access WDC WD40 0UE-22HCT0 0811 PQ: 0 ANSI: 0
> Jul 13 22:00:18 ubuntu kernel: [ 17.557183] sd 2:0:0:0: [sdc] 78140160 512-byte hardware sectors (40008 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 17.583370] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
> Jul 13 22:00:18 ubuntu kernel: [ 17.605174] sd 2:0:0:0: [sdc] 78140160 512-byte hardware sectors (40008 MB)
> Jul 13 22:00:18 ubuntu kernel: [ 17.631297] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
> Jul 13 22:00:18 ubuntu kernel: [ 17.631389] sdc: sdc1
> Jul 13 22:00:18 ubuntu kernel: [ 17.645391] sd 2:0:0:0: [sdc] Attached SCSI disk
> Jul 13 22:00:18 ubuntu kernel: [ 17.645462] sd 2:0:0:0: Attached scsi generic sg4 type 0
> Jul 13 22:00:18 ubuntu kernel: [ 18.652503] powernow_k7: Unknown symbol acpi_processor_notify_smm
> Jul 13 22:00:18 ubuntu kernel: [ 18.652566] powernow_k7: Unknown symbol acpi_processor_unregister_performance
> Jul 13 22:00:18 ubuntu kernel: [ 18.652675] powernow_k7: Unknown symbol acpi_processor_register_performance
> Jul 13 22:00:18 ubuntu kernel: [ 18.669960] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
> Jul 13 22:00:18 ubuntu kernel: [ 18.670023] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
> Jul 13 22:00:18 ubuntu kernel: [ 18.670230] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
> Jul 13 22:00:18 ubuntu kernel: [ 18.670313] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
> Jul 13 22:00:22 ubuntu dhcdbd: Started up.
> Jul 13 22:07:12 ubuntu exiting on signal 15
>
> ----------------------------------
> acpidump 2.6.26-rc1 (ACPI Error)
> ----------------------------------
>
> Jul 13 22:10:50 ubuntu syslogd 1.4.1#21ubuntu3: restart.
> Jul 13 22:10:50 ubuntu kernel: Inspecting /boot/System.map-2.6.26-rc1
> Jul 13 22:10:50 ubuntu kernel: Loaded 30176 symbols from /boot/System.map-2.6.26-rc1.
> Jul 13 22:10:50 ubuntu kernel: Symbols match kernel version 2.6.26.
> Jul 13 22:10:50 ubuntu kernel: No module symbols loaded - kernel modules not enabled.
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Linux version 2.6.26-rc1 (andre@...ntu) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #8 SMP Tue Jul 8 22:28:14 CEST 2008
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-provided physical RAM map:
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000021ff0000 - 0000000021ff8000 (ACPI data)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000021ff8000 - 0000000022000000 (ACPI NVS)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] x86: PAT support disabled.
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] 511MB LOWMEM available.
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Zone PFN ranges:
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] DMA 0 -> 4096
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Normal 4096 -> 131056
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Movable zone start PFN for each node
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] early_node_map[1] active PFN ranges
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] 0: 0 -> 131056
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] DMI 2.3 present.
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] ACPI: RSDP 000FA340, 0014 (r0 AMI )
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] ACPI: 21FF0000, 0000 (r0 0 0)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] ACPI Error (tbutils-0472): Invalid length 0x0 in RSDT/XSDT [20080321]
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 22000000:dcc00000)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] PERCPU: Allocating 39184 bytes of per cpu data
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Kernel command line: root=/dev/mapper/lvm--sdb-root ro
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Enabling fast FPU save and restore... done.
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Initializing CPU#0
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 0.000000] Detected 1659.680 MHz processor.
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] Console: colour VGA+ 80x25
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] console [tty0] enabled
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] Memory: 501880k/524224k available (2364k kernel code, 21736k reserved, 1107k data, 248k init, 0k highmem)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] virtual kernel memory layout:
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] .init : 0xc046b000 - 0xc04a9000 ( 248 kB)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] .data : 0xc034f1e1 - 0xc0464040 (1107 kB)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] .text : 0xc0100000 - 0xc034f1e1 (2364 kB)
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> Jul 13 22:10:50 ubuntu kernel: [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> Jul 13 22:10:50 ubuntu kernel: [ 0.084007] Calibrating delay using timer specific routine.. 3321.02 BogoMIPS (lpj=6642041)
> Jul 13 22:10:50 ubuntu kernel: [ 0.084161] Security Framework initialized
> Jul 13 22:10:50 ubuntu kernel: [ 0.084235] SELinux: Disabled at boot.
> Jul 13 22:10:50 ubuntu kernel: [ 0.084316] Mount-cache hash table entries: 512
> Jul 13 22:10:50 ubuntu kernel: [ 0.084594] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
> Jul 13 22:10:50 ubuntu kernel: [ 0.084667] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> Jul 13 22:10:50 ubuntu kernel: [ 0.084739] CPU: L2 Cache: 256K (64 bytes/line)
> Jul 13 22:10:50 ubuntu kernel: [ 0.084818] Checking 'hlt' instruction... OK.
> Jul 13 22:10:50 ubuntu kernel: [ 0.100347] SMP alternatives: switching to UP code
> Jul 13 22:10:50 ubuntu kernel: [ 0.104043] Freeing SMP alternatives: 11k freed
> Jul 13 22:10:50 ubuntu kernel: [ 0.104111] ACPI: Core revision 20080321
> Jul 13 22:10:50 ubuntu kernel: [ 0.104259] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
> Jul 13 22:10:50 ubuntu kernel: [ 0.104587] weird, boot CPU (#0) not listedby the BIOS.
> Jul 13 22:10:50 ubuntu kernel: [ 0.104656] SMP motherboard not detected.
> Jul 13 22:10:50 ubuntu kernel: [ 0.104722] Local APIC not detected. Using dummy APIC emulation.
> Jul 13 22:10:50 ubuntu kernel: [ 0.104791] SMP disabled
> Jul 13 22:10:50 ubuntu kernel: [ 0.104937] Brought up 1 CPUs
> Jul 13 22:10:50 ubuntu kernel: [ 0.105001] Total of 1 processors activated (3321.02 BogoMIPS).
> Jul 13 22:10:50 ubuntu kernel: [ 0.105470] net_namespace: 644 bytes
> Jul 13 22:10:50 ubuntu kernel: [ 0.105787] NET: Registered protocol family 16
> Jul 13 22:10:50 ubuntu kernel: [ 0.106059] No dock devices found.
> Jul 13 22:10:50 ubuntu kernel: [ 0.107539] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
> Jul 13 22:10:50 ubuntu kernel: [ 0.107612] PCI: Using configuration type 1 for base access
> Jul 13 22:10:50 ubuntu kernel: [ 0.107680] Setting up standard PCI resources
> Jul 13 22:10:50 ubuntu kernel: [ 0.109342] ACPI: Interpreter disabled.
> Jul 13 22:10:50 ubuntu kernel: [ 0.109412] Linux Plug and Play Support v0.97 (c) Adam Belay
> Jul 13 22:10:50 ubuntu kernel: [ 0.109524] pnp: PnP ACPI: disabled
> Jul 13 22:10:50 ubuntu kernel: [ 0.109823] SCSI subsystem initialized
> Jul 13 22:10:50 ubuntu kernel: [ 0.110115] PCI: Probing PCI hardware
> Jul 13 22:10:50 ubuntu kernel: [ 0.110388] pci 0000:00:02.0: Enabling SiS 96x SMBus
> Jul 13 22:10:50 ubuntu kernel: [ 0.111811] PCI: Using IRQ router SIS [1039/0018] at 0000:00:02.0
> Jul 13 22:10:50 ubuntu kernel: [ 0.111902] PCI: Found IRQ 11 for device 0000:00:02.1
> Jul 13 22:10:50 ubuntu kernel: [ 0.111985] PCI: Sharing IRQ 11 with 0000:00:13.1
> Jul 13 22:10:50 ubuntu kernel: [ 0.112307] NET: Registered protocol family 8
> Jul 13 22:10:50 ubuntu kernel: [ 0.112374] NET: Registered protocol family 20
> Jul 13 22:10:50 ubuntu kernel: [ 0.113073] PCI: Bridge: 0000:00:01.0
> Jul 13 22:10:50 ubuntu kernel: [ 0.113139] IO window: disabled.
> Jul 13 22:10:50 ubuntu kernel: [ 0.113208] MEM window: 0xcde00000-0xcfefffff
> Jul 13 22:10:50 ubuntu kernel: [ 0.113277] PREFETCH window: 0x00000000c5c00000-0x00000000cdcfffff
> Jul 13 22:10:50 ubuntu kernel: [ 0.113375] NET: Registered protocol family 2
> Jul 13 22:10:50 ubuntu kernel: [ 0.113557] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 0.113911] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 0.114271] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 0.114612] TCP: Hash tables configured (established 16384 bind 16384)
> Jul 13 22:10:50 ubuntu kernel: [ 0.114684] TCP reno registered
> Jul 13 22:10:50 ubuntu kernel: [ 0.114887] NET: Registered protocol family 1
> Jul 13 22:10:50 ubuntu kernel: [ 0.115126] checking if image is initramfs... it is
> Jul 13 22:10:50 ubuntu kernel: [ 1.445759] Freeing initrd memory: 12959k freed
> Jul 13 22:10:50 ubuntu kernel: [ 1.446362] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> Jul 13 22:10:50 ubuntu kernel: [ 1.446926] audit: initializing netlink socket (disabled)
> Jul 13 22:10:50 ubuntu kernel: [ 1.447019] type=2000 audit(1215987032.444:1): initialized
> Jul 13 22:10:50 ubuntu kernel: [ 1.456683] VFS: Disk quotas dquot_6.5.1
> Jul 13 22:10:50 ubuntu kernel: [ 1.456870] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Jul 13 22:10:50 ubuntu kernel: [ 1.457299] msgmni has been set to 1005 for ipc namespace c0442b40
> Jul 13 22:10:50 ubuntu kernel: [ 1.457529] io scheduler noop registered
> Jul 13 22:10:50 ubuntu kernel: [ 1.457596] io scheduler anticipatory registered
> Jul 13 22:10:50 ubuntu kernel: [ 1.457662] io scheduler deadline registered
> Jul 13 22:10:50 ubuntu kernel: [ 1.457740] io scheduler cfq registered (default)
> Jul 13 22:10:50 ubuntu kernel: [ 1.491046] Real Time Clock Driver v1.12ac
> Jul 13 22:10:50 ubuntu kernel: [ 1.491226] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> Jul 13 22:10:50 ubuntu kernel: [ 1.491477] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Jul 13 22:10:50 ubuntu kernel: [ 1.491724] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> Jul 13 22:10:50 ubuntu kernel: [ 1.493967] brd: module loaded
> Jul 13 22:10:50 ubuntu kernel: [ 1.494094] Driver 'sd' needs updating - please use bus_type methods
> Jul 13 22:10:50 ubuntu kernel: [ 1.494429] scsi0 : pata_sis
> Jul 13 22:10:50 ubuntu kernel: [ 1.494722] scsi1 : pata_sis
> Jul 13 22:10:50 ubuntu kernel: [ 1.494855] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
> Jul 13 22:10:50 ubuntu kernel: [ 1.494928] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
> Jul 13 22:10:50 ubuntu kernel: [ 1.680832] ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
> Jul 13 22:10:50 ubuntu kernel: [ 1.680904] ata1.00: 120103200 sectors, multi 16: LBA48
> Jul 13 22:10:50 ubuntu kernel: [ 1.681389] ata1.01: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
> Jul 13 22:10:50 ubuntu kernel: [ 1.681461] ata1.01: 120103200 sectors, multi 16: LBA48
> Jul 13 22:10:50 ubuntu kernel: [ 1.704616] ata1.00: configured for UDMA/100
> Jul 13 22:10:50 ubuntu kernel: [ 1.728643] ata1.01: configured for UDMA/100
> Jul 13 22:10:50 ubuntu kernel: [ 1.892451] ata2.00: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS04, max UDMA/33
> Jul 13 22:10:50 ubuntu kernel: [ 1.892539] ata2.01: ATAPI: TSSTcorpDVD-ROM TS-H352A, TS03, max UDMA/33
> Jul 13 22:10:50 ubuntu kernel: [ 1.900337] ata2.00: configured for UDMA/33
> Jul 13 22:10:50 ubuntu kernel: [ 1.916328] ata2.01: configured for UDMA/33
> Jul 13 22:10:50 ubuntu kernel: [ 1.916559] scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
> Jul 13 22:10:50 ubuntu kernel: [ 1.916884] sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 1.916976] sd 0:0:0:0: [sda] Write Protect is off
> Jul 13 22:10:50 ubuntu kernel: [ 1.917074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:10:50 ubuntu kernel: [ 1.917238] sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 1.917324] sd 0:0:0:0: [sda] Write Protect is off
> Jul 13 22:10:50 ubuntu kernel: [ 1.917417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:10:50 ubuntu kernel: [ 1.917512] sda: sda1 sda2 sda3 sda4 < sda5 >
> Jul 13 22:10:50 ubuntu kernel: [ 1.949029] sda3: <minix: sda6 sda7 sda8 >
> Jul 13 22:10:50 ubuntu kernel: [ 1.949769] sd 0:0:0:0: [sda] Attached SCSI disk
> Jul 13 22:10:50 ubuntu kernel: [ 1.949950] sd 0:0:0:0: Attached scsi generic sg0 type 0
> Jul 13 22:10:50 ubuntu kernel: [ 1.950118] scsi 0:0:1:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
> Jul 13 22:10:50 ubuntu kernel: [ 1.950374] sd 0:0:1:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 1.950464] sd 0:0:1:0: [sdb] Write Protect is off
> Jul 13 22:10:50 ubuntu kernel: [ 1.950559] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:10:50 ubuntu kernel: [ 1.950710] sd 0:0:1:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 1.950795] sd 0:0:1:0: [sdb] Write Protect is off
> Jul 13 22:10:50 ubuntu kernel: [ 1.950889] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Jul 13 22:10:50 ubuntu kernel: [ 1.950984] sdb: sdb1 sdb2
> Jul 13 22:10:50 ubuntu kernel: [ 1.960128] sd 0:0:1:0: [sdb] Attached SCSI disk
> Jul 13 22:10:50 ubuntu kernel: [ 1.960301] sd 0:0:1:0: Attached scsi generic sg1 type 0
> Jul 13 22:10:50 ubuntu kernel: [ 1.961783] scsi 1:0:0:0: CD-ROM TSSTcorp CD-R/RW SH-R522C TS04 PQ: 0 ANSI: 5
> Jul 13 22:10:50 ubuntu kernel: [ 1.962055] scsi 1:0:0:0: Attached scsi generic sg2 type 5
> Jul 13 22:10:50 ubuntu kernel: [ 1.962596] scsi 1:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H352A TS03 PQ: 0 ANSI: 5
> Jul 13 22:10:50 ubuntu kernel: [ 1.962858] scsi 1:0:1:0: Attached scsi generic sg3 type 5
> Jul 13 22:10:50 ubuntu kernel: [ 1.963141] PNP: No PS/2 controller found. Probing ports directly.
> Jul 13 22:10:50 ubuntu kernel: [ 1.963525] serio: i8042 KBD port at 0x60,0x64 irq 1
> Jul 13 22:10:50 ubuntu kernel: [ 1.963597] serio: i8042 AUX port at 0x60,0x64 irq 12
> Jul 13 22:10:50 ubuntu kernel: [ 1.963868] mice: PS/2 mouse device common for all mice
> Jul 13 22:10:50 ubuntu kernel: [ 1.964256] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@...hat.com
> Jul 13 22:10:50 ubuntu kernel: [ 1.964914] TCP cubic registered
> Jul 13 22:10:50 ubuntu kernel: [ 1.965010] Using IPI No-Shortcut mode
> Jul 13 22:10:50 ubuntu kernel: [ 1.965764] Freeing unused kernel memory: 248k freed
> Jul 13 22:10:50 ubuntu kernel: [ 1.993758] input: AT Translated Set 2 keyboard as /class/input/input0
> Jul 13 22:10:50 ubuntu kernel: [ 2.192566] fuse init (API version 7.9)
> Jul 13 22:10:50 ubuntu kernel: [ 2.209112] thermal: Unknown symbol acpi_processor_set_thermal_limit
> Jul 13 22:10:50 ubuntu kernel: [ 3.269318] Uniform Multi-Platform E-IDE driver
> Jul 13 22:10:50 ubuntu kernel: [ 3.269399] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Jul 13 22:10:50 ubuntu kernel: [ 3.308930] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> Jul 13 22:10:50 ubuntu kernel: [ 3.327634] 8139too Fast Ethernet driver 0.9.28
> Jul 13 22:10:50 ubuntu kernel: [ 3.327767] PCI: Found IRQ 10 for device 0000:00:0d.0
> Jul 13 22:10:50 ubuntu kernel: [ 3.327848] PCI: Sharing IRQ 10 with 0000:00:02.7
> Jul 13 22:10:50 ubuntu kernel: [ 3.327922] PCI: Sharing IRQ 10 with 0000:00:13.2
> Jul 13 22:10:50 ubuntu kernel: [ 3.328563] eth0: RealTek RTL8139 at 0xe082af00, 00:10:b5:11:4a:b0, IRQ 10
> Jul 13 22:10:50 ubuntu kernel: [ 3.387333] usbcore: registered new interface driver usbfs
> Jul 13 22:10:50 ubuntu kernel: [ 3.387434] usbcore: registered new interface driver hub
> Jul 13 22:10:50 ubuntu kernel: [ 3.398286] usbcore: registered new device driver usb
> Jul 13 22:10:50 ubuntu kernel: [ 3.402862] Driver 'sr' needs updating - please use bus_type methods
> Jul 13 22:10:50 ubuntu kernel: [ 3.411574] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
> Jul 13 22:10:50 ubuntu kernel: [ 3.411659] Uniform CD-ROM driver Revision: 3.20
> Jul 13 22:10:50 ubuntu kernel: [ 3.416064] PCI: Found IRQ 10 for device 0000:00:13.2
> Jul 13 22:10:50 ubuntu kernel: [ 3.416155] PCI: Sharing IRQ 10 with 0000:00:02.7
> Jul 13 22:10:50 ubuntu kernel: [ 3.416224] PCI: Sharing IRQ 10 with 0000:00:0d.0
> Jul 13 22:10:50 ubuntu kernel: [ 3.416314] ehci_hcd 0000:00:13.2: EHCI Host Controller
> Jul 13 22:10:50 ubuntu kernel: [ 3.416420] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
> Jul 13 22:10:50 ubuntu kernel: [ 3.416571] ehci_hcd 0000:00:13.2: irq 10, io mem 0xcfffde00
> Jul 13 22:10:50 ubuntu kernel: [ 3.418219] sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
> Jul 13 22:10:50 ubuntu kernel: [ 3.428251] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
> Jul 13 22:10:50 ubuntu kernel: [ 3.428570] usb usb1: configuration #1 chosen from 1 choice
> Jul 13 22:10:50 ubuntu kernel: [ 3.428673] hub 1-0:1.0: USB hub found
> Jul 13 22:10:50 ubuntu kernel: [ 3.428753] hub 1-0:1.0: 4 ports detected
> Jul 13 22:10:50 ubuntu kernel: [ 3.605872] kjournald starting. Commit interval 5 seconds
> Jul 13 22:10:50 ubuntu kernel: [ 3.605962] EXT3-fs: mounted filesystem with ordered data mode.
> Jul 13 22:10:50 ubuntu kernel: [ 3.772257] usb 1-1: new high speed USB device using ehci_hcd and address 2
> Jul 13 22:10:50 ubuntu kernel: [ 3.905784] usb 1-1: configuration #1 chosen from 1 choice
> Jul 13 22:10:50 ubuntu kernel: [ 9.571878] eth0: link down
> Jul 13 22:10:50 ubuntu kernel: [ 10.711434] NET: Registered protocol family 10
> Jul 13 22:10:50 ubuntu kernel: [ 10.711966] lo: Disabled Privacy Extensions
> Jul 13 22:10:50 ubuntu kernel: [ 10.712509] ADDRCONF(NETDEV_UP): eth0: link is not ready
> Jul 13 22:10:50 ubuntu kernel: [ 11.436931] Linux agpgart interface v0.103
> Jul 13 22:10:50 ubuntu kernel: [ 11.584322] agpgart: Detected SiS chipset - id:1845
> Jul 13 22:10:50 ubuntu kernel: [ 11.598679] agpgart: AGP aperture is 64M @ 0xd0000000
> Jul 13 22:10:50 ubuntu kernel: [ 11.960979] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
> Jul 13 22:10:50 ubuntu kernel: [ 12.264938] Initializing USB Mass Storage driver...
> Jul 13 22:10:50 ubuntu kernel: [ 12.269153] scsi2 : SCSI emulation for USB Mass Storage devices
> Jul 13 22:10:50 ubuntu kernel: [ 12.269667] usbcore: registered new interface driver usb-storage
> Jul 13 22:10:50 ubuntu kernel: [ 12.269740] USB Mass Storage support registered.
> Jul 13 22:10:50 ubuntu kernel: [ 12.345305] PCI: Found IRQ 10 for device 0000:00:02.7
> Jul 13 22:10:50 ubuntu kernel: [ 12.345398] PCI: Sharing IRQ 10 with 0000:00:0d.0
> Jul 13 22:10:50 ubuntu kernel: [ 12.345470] PCI: Sharing IRQ 10 with 0000:00:13.2
> Jul 13 22:10:50 ubuntu kernel: [ 12.660798] intel8x0_measure_ac97_clock: measured 55884 usecs
> Jul 13 22:10:50 ubuntu kernel: [ 12.660875] intel8x0: clocking to 48000
> Jul 13 22:10:50 ubuntu kernel: [ 12.812879] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
> Jul 13 22:10:50 ubuntu kernel: [ 13.220607] loop: module loaded
> Jul 13 22:10:50 ubuntu kernel: [ 13.332340] Adding 1048568k swap on /dev/mapper/lvm--sdb-swap. Priority:-1 extents:1 across:1048568k
> Jul 13 22:10:50 ubuntu kernel: [ 13.803268] EXT3 FS on dm-1, internal journal
> Jul 13 22:10:50 ubuntu kernel: [ 16.219425] kjournald starting. Commit interval 5 seconds
> Jul 13 22:10:50 ubuntu kernel: [ 16.219680] EXT3 FS on sdb1, internal journal
> Jul 13 22:10:50 ubuntu kernel: [ 16.219687] EXT3-fs: mounted filesystem with ordered data mode.
> Jul 13 22:10:50 ubuntu kernel: [ 16.249832] kjournald starting. Commit interval 5 seconds
> Jul 13 22:10:50 ubuntu kernel: [ 16.250114] EXT3 FS on dm-2, internal journal
> Jul 13 22:10:50 ubuntu kernel: [ 16.250120] EXT3-fs: mounted filesystem with ordered data mode.
> Jul 13 22:10:50 ubuntu kernel: [ 17.279427] scsi 2:0:0:0: Direct-Access WDC WD40 0UE-22HCT0 0811 PQ: 0 ANSI: 0
> Jul 13 22:10:50 ubuntu kernel: [ 17.301185] sd 2:0:0:0: [sdc] 78140160 512-byte hardware sectors (40008 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 17.327475] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
> Jul 13 22:10:50 ubuntu kernel: [ 17.349155] sd 2:0:0:0: [sdc] 78140160 512-byte hardware sectors (40008 MB)
> Jul 13 22:10:50 ubuntu kernel: [ 17.375431] sd 2:0:0:0: [sdc] Test WP failed, assume Write Enabled
> Jul 13 22:10:50 ubuntu kernel: [ 17.375522] sdc: sdc1
> Jul 13 22:10:50 ubuntu kernel: [ 17.389437] sd 2:0:0:0: [sdc] Attached SCSI disk
> Jul 13 22:10:50 ubuntu kernel: [ 17.389505] sd 2:0:0:0: Attached scsi generic sg4 type 0
> Jul 13 22:10:50 ubuntu kernel: [ 18.342582] powernow_k7: Unknown symbol acpi_processor_notify_smm
> Jul 13 22:10:50 ubuntu kernel: [ 18.342644] powernow_k7: Unknown symbol acpi_processor_unregister_performance
> Jul 13 22:10:50 ubuntu kernel: [ 18.342753] powernow_k7: Unknown symbol acpi_processor_register_performance
> Jul 13 22:10:50 ubuntu kernel: [ 18.363176] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
> Jul 13 22:10:50 ubuntu kernel: [ 18.363238] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
> Jul 13 22:10:50 ubuntu kernel: [ 18.363445] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
> Jul 13 22:10:50 ubuntu kernel: [ 18.363528] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
> Jul 13 22:10:54 ubuntu dhcdbd: Started up.
> Jul 13 22:16:35 ubuntu kernel: [ 363.646217] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
> Jul 13 22:16:35 ubuntu kernel: [ 363.646289] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
> Jul 13 22:16:35 ubuntu kernel: [ 363.646497] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
> Jul 13 22:16:35 ubuntu kernel: [ 363.646579] acpi_cpufreq: Unknown
> symbol acpi_processor_register_performance
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists