linux-kernel - Re: 2.6.24 ipw2200 driver can't be reset after firmware explodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20080714101349.38079048.akpm@linux-foundation.org>
Date:	Mon, 14 Jul 2008 10:13:49 -0700
From:	Andrew Morton <akpm@...ux-foundation.org>
To:	Vivek Dasmohapatra <vivek@...a.org>
Cc:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	netdev@...r.kernel.org, linux-wireless@...r.kernel.org
Subject: Re: 2.6.24 ipw2200 driver can't be reset after firmware explodes

(cc linux-wireless)

On Mon, 14 Jul 2008 13:27:51 +0100 (BST) Vivek Dasmohapatra <vivek@...a.org> wrote:

> Hi: I have a thinkpad t43p with an ipw2200 driven piece of hardware in it.
> 
> 04:02.0 Network controller [0280]:
>   Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4224] (rev 05)
>          Kernel driver in use: ipw2200
>          Kernel modules: ipw2200
> 
> >From time to time, the firmware flakes out, and I get messages like this:
> [ I'm not sure which version of the firmware I have, I can't see anything
>    obvious in dmesg when the ipw2200 module loads: I have files like
>    ipw-2.4-bss.fw in /lib/firmware if that helps ]
> 
> Jul 14 03:42:25 neko kernel: 
> ipw2200: Failed to send SCAN_ABORT: Command timed out.
> Jul 14 03:42:26 neko kernel: 
> ipw2200: Failed to send CARD_DISABLE: Command timed out.
> Jul 14 03:42:32 neko kernel: 
> ipw2200: Failed to send SCAN_ABORT: Command timed out.
> Jul 14 03:42:33 neko kernel: 
> ipw2200: Failed to send CARD_DISABLE: Command timed out.
> Jul 14 03:42:39 neko kernel: 
> ipw2200: Failed to send SCAN_ABORT: Command timed out.
> 
> repeated again and again.
> 
> There's usually a "firmware error detected, restarting" message buried
> somewhere in the logs before that happens.
> 
> Under kernel 2.6.16, I was able to fix this as follows:
> 
> echo -n 3 > /sys/class/net/$IFACE/device/power/state
> sleep 1
> echo -n 0 > /sys/class/net/$IFACE/device/power/state
> 
> ( removing and reloading the module has no effect here, under
>    either kernel 2.6.16 or 2.6.24: taking the interface down and
>    bringing it up again is likewise ineffective )
> 
> However, I note that under 2.6.24 said /sys interface is no
> longer present, so once the firmware dies, I am forced to either
> hunt down a network cable with something useful on the other end,
> or live without networking, or reboot.
> 
> Is there a new way to achieve the same effect in 2.6.24? If there's not,
> is there likely to be in the future? Or should I just revert to 2.6.16
> until such time as I replace my laptop and (hopefully) don't have to
> struggle with the intel wifi hardware any more?
> 
> The firmware bug is covered here: 
> http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=875
> if that's helpful/relevant.
> 
> [ CCd to netdev as I was told it would be of interest there too,
>    apologies if this is not the case ]
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/