| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080718130433.GA24568@fluff.org.uk>
Date: Fri, 18 Jul 2008 14:04:33 +0100
From: Ben Dooks <ben-linux@...ff.org>
To: linux-arm-kernel@...ts.arm.linux.org.uk,
linux-kernel@...r.kernel.org
Cc: David Brownell <david-b@...bell.net>
Subject: Add to_irq fields to gpiolib (with sample implementation)
The two patches form a pair of patches to show
that we should consider adding an to_irq field
to the gpio_chip structure and gpiolib support.
The reason is that if we add support for devices
registering gpio to also register interrputs, then
a single arch-dependant interrupt mapping is not
going to be sufficient.
Note, this set does not remove any clashing
definitions that may have of gpio_to_irq.
---
GPIO: Add generic gpio_to_irq call.
Add gpio_to_irq() implementation allowing the
gpio_chip registration to also specify an function
to map GPIO offsets into IRQs.
Signed-off-by: Ben Dooks <ben-linux@...ff.org>
Index: linux-2.6.26-quilt3/drivers/gpio/gpiolib.c
===================================================================
--- linux-2.6.26-quilt3.orig/drivers/gpio/gpiolib.c 2008-07-18 00:40:52.000000000 +0100
+++ linux-2.6.26-quilt3/drivers/gpio/gpiolib.c 2008-07-18 00:52:07.000000000 +0100
@@ -339,6 +339,36 @@ const char *gpiochip_is_requested(struct
}
EXPORT_SYMBOL_GPL(gpiochip_is_requested);
+int gpio_to_irq(unsigned gpio)
+{
+ struct gpio_chip *chip;
+ struct gpio_desc *desc = &gpio_desc[gpio];
+ unsigned long flags;
+ int status = -EINVAL;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ if (!gpio_is_valid(gpio))
+ goto fail;
+
+ chip = desc->chip;
+ if (!chip || !chip->to_irq)
+ goto fail;
+
+ gpio -= chip->base;
+ if (gpio >= chip->ngpio)
+ goto fail;
+
+ status = chip->to_irq(chip, gpio);
+
+ fail:
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ if (status)
+ pr_debug("%s: gpio-%d status %d\n",
+ __func__, gpio, status);
+ return status;
+}
+EXPORT_SYMBOL_GPL(gpio_to_irq);
/* Drivers MUST set GPIO direction before making get/set calls. In
* some cases this is done in early boot, before IRQs are enabled.
Index: linux-2.6.26-quilt3/include/asm-generic/gpio.h
===================================================================
--- linux-2.6.26-quilt3.orig/include/asm-generic/gpio.h 2008-07-18 00:40:52.000000000 +0100
+++ linux-2.6.26-quilt3/include/asm-generic/gpio.h 2008-07-18 00:46:32.000000000 +0100
@@ -40,6 +40,7 @@ struct module;
* @dbg_show: optional routine to show contents in debugfs; default code
* will be used when this is omitted, but custom code can show extra
* state (such as pullup/pulldown configuration).
+ * @to_irq: convert gpio offset to IRQ number.
* @base: identifies the first GPIO number handled by this chip; or, if
* negative during registration, requests dynamic ID allocation.
* @ngpio: the number of GPIOs handled by this controller; the last GPIO
@@ -71,6 +72,9 @@ struct gpio_chip {
unsigned offset, int value);
void (*dbg_show)(struct seq_file *s,
struct gpio_chip *chip);
+ int (*to_irq)(struct gpio_chip *chip,
+ unsigned offset);
+
int base;
u16 ngpio;
unsigned can_sleep:1;
@@ -97,6 +101,7 @@ extern int gpio_direction_output(unsigne
extern int gpio_get_value_cansleep(unsigned gpio);
extern void gpio_set_value_cansleep(unsigned gpio, int value);
+extern int gpio_to_irq(unsigned gpio);
/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
* the GPIO is constant and refers to some always-present controller,
S3C24XX: Add gpio_to_irq implementation
Add the necessary to_irq fields for the S3C24XX
GPIO banks that support IRQs.
Signed-off-by: Ben Dooks <ben-linux@...ff.org>
Index: linux-2.6.26-quilt3/arch/arm/plat-s3c24xx/gpiolib.c
===================================================================
--- linux-2.6.26-quilt3.orig/arch/arm/plat-s3c24xx/gpiolib.c 2008-07-18 12:35:15.000000000 +0100
+++ linux-2.6.26-quilt3/arch/arm/plat-s3c24xx/gpiolib.c 2008-07-18 12:37:39.000000000 +0100
@@ -150,6 +150,19 @@ static int s3c24xx_gpiolib_banka_output(
return 0;
}
+static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset < 4)
+ return IRQ_EINT0 + offset;
+
+ return IRQ_EINT4 + (offset - 4);
+}
+
+static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
+{
+ return IRQ_EINT8 + offset;
+}
+
struct s3c24xx_gpio_chip gpios[] = {
[0] = {
@@ -228,6 +241,7 @@ struct s3c24xx_gpio_chip gpios[] = {
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
+ .to_irq = s3c24xx_gpiolib_bankf_toirq,
},
},
[6] = {
@@ -241,6 +255,7 @@ struct s3c24xx_gpio_chip gpios[] = {
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
+ .to_irq = s3c24xx_gpiolib_bankg_toirq,
},
},
};
--
Ben (ben@...ff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
View attachment "simtec-gpiolib-add-irqmappings.patch" of type "text/x-diff" (2779 bytes)
View attachment "simtec-s3c24xx-gpiolib-toirq.patch" of type "text/x-diff" (1378 bytes)
Powered by blists - more mailing lists