[ 0.000000] Linux version 2.6.26 (simon@redrum) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #03415-gfa63e86-dirty SMP PREEMPT 2008-07-19T02:49:13+0100 [ 0.000000] Command line: root=/dev/sdb1 ro init=/startup vga=0xf07 sysrq_always_enabled usbhid.mousepoll=1 tuner.debug=1 initcall_debug=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000480000000 (usable) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] last_pfn = 0x480000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffd0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffd0000 @ 8000-b000 [ 0.000000] last_map_addr: 7ffd0000 end: 7ffd0000 [ 0.000000] init_memory_mapping [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0100000000 - 0480000000 page 1G [ 0.000000] kernel direct mapping tables up to 480000000 @ a000-b000 [ 0.000000] last_map_addr: 480000000 end: 480000000 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F9680, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7FFD0100, 005C (r1 040208 XSDT1120 20080402 MSFT 97) [ 0.000000] ACPI: FACP 7FFD0290, 00F4 (r3 040208 FACP1120 20080402 MSFT 97) [ 0.000000] ACPI: DSDT 7FFD0470, 4D61 (r1 0AAAA 0AAAA000 0 INTL 20051117) [ 0.000000] ACPI: FACS 7FFDE000, 0040 [ 0.000000] ACPI: APIC 7FFD0390, 00A0 (r1 040208 APIC1120 20080402 MSFT 97) [ 0.000000] ACPI: MCFG 7FFD0430, 003C (r1 040208 OEMMCFG 20080402 MSFT 97) [ 0.000000] ACPI: OEMB 7FFDE040, 0091 (r1 040208 OEMB1120 20080402 MSFT 97) [ 0.000000] ACPI: SRAT 7FFD51E0, 0150 (r1 AMD HAMMER 1 AMD 1) [ 0.000000] ACPI: HPET 7FFD5330, 0038 (r1 040208 OEMHPET0 20080402 MSFT 97) [ 0.000000] ACPI: SSDT 7FFD5370, 143C (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 4 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 5 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 6 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 7 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] Entering add_active_range(0, 0x100, 0x7ffd0) 1 entries of 256 used [ 0.000000] SRAT: Node 0 PXM 0 100000000-280000000 [ 0.000000] Entering add_active_range(0, 0x100000, 0x280000) 2 entries of 256 used [ 0.000000] SRAT: Node 1 PXM 1 280000000-480000000 [ 0.000000] Entering add_active_range(1, 0x280000, 0x480000) 3 entries of 256 used [ 0.000000] NUMA: Allocated memnodemap from a000 - 13040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000280000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000002fff] [ 0.000000] bootmap [0000000000014000 - 0000000000063fff] pages 50 [ 0.000000] (6 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000983d08] TEXT DATA BSS ==> [0000200000 - 0000983d08] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #5 [000000a000 - 0000013040] MEMNODEMAP ==> [000000a000 - 0000013040] [ 0.000000] Bootmem setup node 1 0000000280000000-0000000480000000 [ 0.000000] NODE_DATA [0000000280000000 - 0000000280001fff] [ 0.000000] bootmap [0000000280002000 - 0000000280041fff] pages 40 [ 0.000000] (6 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 0000983d08] TEXT DATA BSS [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE [ 0.000000] #5 [000000a000 - 0000013040] MEMNODEMAP [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe20008bfffff] PMD -> [ffff880028200000-ffff88002f1fffff] on node 0 [ 0.000000] [ffffe20008c00000-ffffe2000fbfffff] PMD -> [ffff880280200000-ffff8802871fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00480000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffd0 [ 0.000000] 0: 0x00100000 -> 0x00280000 [ 0.000000] 1: 0x00280000 -> 0x00480000 [ 0.000000] On node 0 totalpages: 2097007 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2035 pages reserved [ 0.000000] DMA zone: 1908 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505864 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1551360 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 0 pages used for memmap [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 42752 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 2 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4127612 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sdb1 ro init=/startup vga=0xf07 sysrq_always_enabled usbhid.mousepoll=1 tuner.debug=1 initcall_debug=1 [ 0.000000] debug: sysrq always enabled. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 2200.088 MHz processor. [ 0.001999] spurious 8259A interrupt: IRQ7. [ 0.001999] Console: colour VGA+ 80x60 [ 0.001999] console [tty0] enabled [ 0.001999] Checking aperture... [ 0.001999] No AGP bridge found [ 0.001999] Node 0: aperture @ 80000000 size 1024 MB [ 0.001999] Node 1: aperture @ 80000000 size 1024 MB [ 0.001999] Memory: 16538500k/18874368k available (3947k kernel code, 238136k reserved, 1876k data, 320k init) [ 0.001999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.001999] hpet clockevent registered [ 0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4400.17 BogoMIPS (lpj=2200085) [ 0.003675] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.011888] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015539] Mount-cache hash table entries: 256 [ 0.015822] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.015929] CPU: L2 Cache: 512K (64 bytes/line) [ 0.015997] CPU 0/0 -> Node 0 [ 0.015997] tseg: 0000000000 [ 0.015997] CPU: Physical Processor ID: 0 [ 0.015997] CPU: Processor Core ID: 0 [ 0.015997] using C1E aware idle routine [ 0.016123] ACPI: Core revision 20080609 [ 0.036580] CPU0: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.036736] Using local APIC timer interrupts. [ 0.037994] APIC timer calibration result 12500507 [ 0.037994] Detected 12.500 MHz APIC timer. [ 0.037994] Booting processor 1/1 ip 6000 [ 0.047992] Initializing CPU#1 [ 0.108302] Calibrating delay using timer specific routine.. <6>4404.49 BogoMIPS (lpj=2202245) [ 0.108309] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.108311] CPU: L2 Cache: 512K (64 bytes/line) [ 0.108313] CPU 1/1 -> Node 0 [ 0.108315] CPU: Physical Processor ID: 0 [ 0.108316] CPU: Processor Core ID: 1 [ 0.108698] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.108979] CPU1: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.109983] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.111000] Booting processor 2/2 ip 6000 [ 0.121981] Initializing CPU#2 [ 0.182547] Calibrating delay using timer specific routine.. <6>4404.39 BogoMIPS (lpj=2202198) [ 0.182553] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.182555] CPU: L2 Cache: 512K (64 bytes/line) [ 0.182557] CPU 2/2 -> Node 0 [ 0.182559] CPU: Physical Processor ID: 0 [ 0.182560] CPU: Processor Core ID: 2 [ 0.182968] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.182972] CPU2: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.183971] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.184971] Booting processor 3/3 ip 6000 [ 0.194970] Initializing CPU#3 [ 0.255417] Calibrating delay using timer specific routine.. <6>4404.40 BogoMIPS (lpj=2202200) [ 0.255424] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.255425] CPU: L2 Cache: 512K (64 bytes/line) [ 0.255427] CPU 3/3 -> Node 0 [ 0.255429] CPU: Physical Processor ID: 0 [ 0.255430] CPU: Processor Core ID: 3 [ 0.255820] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.255960] CPU3: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.256960] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.258219] Booting processor 4/4 ip 6000 [ 0.269958] Initializing CPU#4 [ 0.330274] Calibrating delay using timer specific routine.. <6>4400.36 BogoMIPS (lpj=2200181) [ 0.330282] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.330284] CPU: L2 Cache: 512K (64 bytes/line) [ 0.330286] CPU 4/4 -> Node 1 [ 0.330288] CPU: Physical Processor ID: 1 [ 0.330289] CPU: Processor Core ID: 0 [ 0.330709] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.330949] CPU4: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.331928] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.332949] Booting processor 5/5 ip 6000 [ 0.342947] Initializing CPU#5 [ 0.403324] Calibrating delay using timer specific routine.. <6>4400.36 BogoMIPS (lpj=2200183) [ 0.403331] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.403333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.403335] CPU 5/5 -> Node 1 [ 0.403338] CPU: Physical Processor ID: 1 [ 0.403339] CPU: Processor Core ID: 1 [ 0.403761] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.403938] CPU5: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.404938] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.406180] Booting processor 6/6 ip 6000 [ 0.416936] Initializing CPU#6 [ 0.477379] Calibrating delay using timer specific routine.. <6>4400.38 BogoMIPS (lpj=2200194) [ 0.477386] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.477388] CPU: L2 Cache: 512K (64 bytes/line) [ 0.477390] CPU 6/6 -> Node 1 [ 0.477393] CPU: Physical Processor ID: 1 [ 0.477394] CPU: Processor Core ID: 2 [ 0.477811] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.477926] CPU6: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.478926] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.479926] Booting processor 7/7 ip 6000 [ 0.489925] Initializing CPU#7 [ 0.550314] Calibrating delay using timer specific routine.. <6>4400.36 BogoMIPS (lpj=2200180) [ 0.550323] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.550324] CPU: L2 Cache: 512K (64 bytes/line) [ 0.550326] CPU 7/7 -> Node 1 [ 0.550329] CPU: Physical Processor ID: 1 [ 0.550330] CPU: Processor Core ID: 3 [ 0.550755] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.550923] CPU7: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.551895] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.552923] Brought up 8 CPUs [ 0.552923] Total of 8 processors activated (35214.93 BogoMIPS). [ 0.552923] calling init_cpufreq_transition_notifier_list+0x0/0x1b [ 0.552923] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs [ 0.553043] calling net_ns_init+0x0/0x182 [ 0.553142] net_namespace: 1224 bytes [ 0.553245] initcall net_ns_init+0x0/0x182 returned 0 after 0 msecs [ 0.553364] calling cpufreq_tsc+0x0/0x16 [ 0.553466] initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs [ 0.553584] calling init_smp_flush+0x0/0x4a [ 0.553682] initcall init_smp_flush+0x0/0x4a returned 0 after 0 msecs [ 0.553803] calling sysctl_init+0x0/0x32 [ 0.554034] initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs [ 0.554176] calling ksysfs_init+0x0/0xbb [ 0.554294] initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs [ 0.554434] calling init_jiffies_clocksource+0x0/0x12 [ 0.554550] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs [ 0.554774] calling pm_init+0x0/0x34 [ 0.554891] initcall pm_init+0x0/0x34 returned 0 after 0 msecs [ 0.555032] calling filelock_init+0x0/0x2e [ 0.555163] initcall filelock_init+0x0/0x2e returned 0 after 0 msecs [ 0.555303] calling init_script_binfmt+0x0/0x12 [ 0.555415] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.555540] calling init_elf_binfmt+0x0/0x12 [ 0.555651] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.555777] calling init_compat_elf_binfmt+0x0/0x12 [ 0.555889] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.556028] calling debugfs_init+0x0/0x51 [ 0.556133] initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs [ 0.556267] calling calibrate_xor_blocks+0x0/0xa7 [ 0.556369] xor: automatically using best checksumming function: generic_sse [ 0.560985] generic_sse: 8612.000 MB/sec [ 0.561081] xor: using function: generic_sse (8612.000 MB/sec) [ 0.561205] initcall calibrate_xor_blocks+0x0/0xa7 returned 0 after 4 msecs [ 0.561324] calling random32_init+0x0/0x5b [ 0.561432] initcall random32_init+0x0/0x5b returned 0 after 0 msecs [ 0.561543] calling cpufreq_core_init+0x0/0x7f [ 0.561664] initcall cpufreq_core_init+0x0/0x7f returned 0 after 0 msecs [ 0.561785] calling sock_init+0x0/0x5e [ 0.561923] initcall sock_init+0x0/0x5e returned 0 after 0 msecs [ 0.562047] calling netlink_proto_init+0x0/0x14e [ 0.562152] NET: Registered protocol family 16 [ 0.562259] initcall netlink_proto_init+0x0/0x14e returned 0 after 0 msecs [ 0.562389] calling bdi_class_init+0x0/0x3d [ 0.562540] initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs [ 0.562656] calling kobject_uevent_init+0x0/0x45 [ 0.562765] initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs [ 0.562869] calling pcibus_class_init+0x0/0x12 [ 0.563025] initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs [ 0.563145] calling pci_driver_init+0x0/0x12 [ 0.563292] initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs [ 0.563420] calling backlight_class_init+0x0/0x49 [ 0.563564] initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs [ 0.563692] calling video_output_class_init+0x0/0x12 [ 0.563826] initcall video_output_class_init+0x0/0x12 returned 0 after 0 msecs [ 0.564038] calling dock_init+0x0/0x5a [ 0.564199] No dock devices found. [ 0.564297] initcall dock_init+0x0/0x5a returned 0 after 0 msecs [ 0.564407] calling tty_class_init+0x0/0x2a [ 0.564541] initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs [ 0.564655] calling vtconsole_class_init+0x0/0xba [ 0.564847] initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs [ 0.564990] calling register_node_type+0x0/0x6b [ 0.565168] initcall register_node_type+0x0/0x6b returned 0 after 0 msecs [ 0.565315] calling enable_pci_io_ecs+0x0/0x2e [ 0.565465] initcall enable_pci_io_ecs+0x0/0x2e returned 0 after 0 msecs [ 0.565632] calling early_fill_mp_bus_info+0x0/0x7e5 [ 0.565764] node 0 link 0: io port [1000, ffffff] [ 0.565768] TOM: 0000000080000000 aka 2048M [ 0.565896] Fam 10h mmconf [e0000000, e00fffff] [ 0.565899] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff] [ 0.565903] node 0 link 0: mmio [f0000000, fec0ffff] [ 0.565906] node 0 link 0: mmio [a0000, bffff] [ 0.565909] node 0 link 0: mmio [80000000, dfffffff] [ 0.565912] TOM2: 0000000480000000 aka 18432M [ 0.566045] bus: [00,07] on node 0 link 0 [ 0.566047] bus: 00 index 0 io port: [0, ffff] [ 0.566048] bus: 00 index 1 mmio: [e0100000, ffffffff] [ 0.566050] bus: 00 index 2 mmio: [a0000, bffff] [ 0.566058] bus: 00 index 3 mmio: [80000000, dfffffff] [ 0.566060] bus: 00 index 4 mmio: [480000000, fcffffffff] [ 0.566062] initcall early_fill_mp_bus_info+0x0/0x7e5 returned 0 after 0 msecs [ 0.566266] calling arch_kdebugfs_init+0x0/0x8 [ 0.566374] initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs [ 0.566500] calling mtrr_if_init+0x0/0x77 [ 0.566605] initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs [ 0.566733] calling ffh_cstate_init+0x0/0x31 [ 0.566842] initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs [ 0.566923] initcall ffh_cstate_init+0x0/0x31 returned with error code -1 [ 0.567051] calling acpi_pci_init+0x0/0x40 [ 0.567150] ACPI: bus type pci registered [ 0.567256] initcall acpi_pci_init+0x0/0x40 returned 0 after 0 msecs [ 0.567377] calling init_acpi_device_notify+0x0/0x4b [ 0.567477] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs [ 0.567674] calling dmi_id_init+0x0/0x2e9 [ 0.567871] initcall dmi_id_init+0x0/0x2e9 returned 0 after 0 msecs [ 0.567998] calling pci_arch_init+0x0/0x4e [ 0.568125] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.568241] PCI: MCFG area at e0000000 reserved in E820 [ 0.573338] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.573447] PCI: Using configuration type 1 for base access [ 0.573557] initcall pci_arch_init+0x0/0x4e returned 0 after 4 msecs [ 0.573690] calling topology_init+0x0/0x7c [ 0.574145] initcall topology_init+0x0/0x7c returned 0 after 0 msecs [ 0.574294] calling mtrr_init_finialize+0x0/0x3d [ 0.575923] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 msecs [ 0.575923] calling param_sysfs_init+0x0/0x1e7 [ 0.579305] initcall param_sysfs_init+0x0/0x1e7 returned 0 after 3 msecs [ 0.579426] calling pm_sysrq_init+0x0/0x19 [ 0.579535] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs [ 0.579668] calling readahead_init+0x0/0x38 [ 0.579830] initcall readahead_init+0x0/0x38 returned 0 after 0 msecs [ 0.579950] calling init_bio+0x0/0xc5 [ 0.580186] initcall init_bio+0x0/0xc5 returned 0 after 0 msecs [ 0.580309] calling blk_settings_init+0x0/0x2a [ 0.580414] initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs [ 0.580532] calling blk_ioc_init+0x0/0x2a [ 0.580656] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs [ 0.580787] calling genhd_device_init+0x0/0x55 [ 0.581150] initcall genhd_device_init+0x0/0x55 returned 0 after 0 msecs [ 0.581283] calling pci_slot_init+0x0/0x45 [ 0.581394] initcall pci_slot_init+0x0/0x45 returned 0 after 0 msecs [ 0.581528] calling fbmem_init+0x0/0x8a [ 0.581684] initcall fbmem_init+0x0/0x8a returned 0 after 0 msecs [ 0.581805] calling acpi_init+0x0/0x221 [ 0.582734] ACPI: EC: Look up EC in DSDT [ 0.599046] ACPI: Interpreter enabled [ 0.599156] ACPI: (supports S0 S5) [ 0.599325] ACPI: Using IOAPIC for interrupt routing [ 0.599500] initcall acpi_init+0x0/0x221 returned 0 after 17 msecs [ 0.599620] calling acpi_scan_init+0x0/0x11e [ 0.612043] initcall acpi_scan_init+0x0/0x11e returned 0 after 12 msecs [ 0.612165] calling acpi_ec_init+0x0/0x61 [ 0.612344] initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs [ 0.612463] calling acpi_pci_root_init+0x0/0x28 [ 0.612644] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.613055] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.613167] pci 0000:00:01.1: PME# disabled [ 0.613312] pci 0000:00:02.0: supports D1 [ 0.613313] pci 0000:00:02.0: supports D2 [ 0.613315] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.613426] pci 0000:00:02.0: PME# disabled [ 0.613567] pci 0000:00:02.1: supports D1 [ 0.613569] pci 0000:00:02.1: supports D2 [ 0.613580] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.613691] pci 0000:00:02.1: PME# disabled [ 0.614049] pci 0000:00:08.0: supports D1 [ 0.614051] pci 0000:00:08.0: supports D2 [ 0.614052] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614166] pci 0000:00:08.0: PME# disabled [ 0.614316] pci 0000:00:09.0: supports D1 [ 0.614317] pci 0000:00:09.0: supports D2 [ 0.614328] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614441] pci 0000:00:09.0: PME# disabled [ 0.614574] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614682] pci 0000:00:0a.0: PME# disabled [ 0.614817] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614932] pci 0000:00:0d.0: PME# disabled [ 0.615058] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.615159] pci 0000:00:0e.0: PME# disabled [ 0.615291] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.615397] pci 0000:00:0f.0: PME# disabled [ 0.615874] pci 0000:01:06.0: supports D1 [ 0.615875] pci 0000:01:06.0: supports D2 [ 0.615961] pci 0000:01:07.0: supports D1 [ 0.615963] pci 0000:01:07.0: supports D2 [ 0.615996] pci 0000:00:06.0: transparent bridge [ 0.616186] pci 0000:03:00.0: supports D1 [ 0.616188] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.616297] pci 0000:03:00.0: PME# disabled [ 0.616444] pci 0000:03:00.1: supports D1 [ 0.616446] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.616562] pci 0000:03:00.1: PME# disabled [ 0.616886] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.616998] pci 0000:04:00.0: PME# disabled [ 0.617162] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.617263] pci 0000:04:00.1: PME# disabled [ 0.617483] pci 0000:05:00.0: supports D1 [ 0.617484] pci 0000:05:00.0: supports D2 [ 0.617615] pci 0000:07:00.0: supports D1 [ 0.617616] pci 0000:07:00.0: supports D2 [ 0.617676] pci 0000:07:00.1: supports D1 [ 0.617686] pci 0000:07:00.1: supports D2 [ 0.617830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.618386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.618589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.618752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.618908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.619078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] [ 0.634263] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 20 msecs [ 0.634383] calling acpi_pci_link_init+0x0/0x48 [ 0.634761] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 0.635248] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.635700] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 [ 0.636159] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.636637] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *7 [ 0.637120] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.637584] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 [ 0.638051] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 [ 0.638524] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.639001] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5 [ 0.639444] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.639897] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.640384] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.640863] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 0.641337] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.641791] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.642233] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 0.642673] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.643159] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 0.643455] initcall acpi_pci_link_init+0x0/0x48 returned 0 after 8 msecs [ 0.643592] calling acpi_power_init+0x0/0x77 [ 0.643775] initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs [ 0.643906] calling acpi_system_init+0x0/0x1b0 [ 0.644087] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F3, should be F0 [20080609] [ 0.644379] initcall acpi_system_init+0x0/0x1b0 returned 0 after 0 msecs [ 0.644503] calling pnp_init+0x0/0x20 [ 0.644602] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.644742] initcall pnp_init+0x0/0x20 returned 0 after 0 msecs [ 0.644856] calling pnpacpi_init+0x0/0x8c [ 0.644961] pnp: PnP ACPI init [ 0.645072] ACPI: bus type pnp registered [ 0.651520] pnp: PnP ACPI: found 15 devices [ 0.651626] ACPI: ACPI bus type pnp unregistered [ 0.651737] initcall pnpacpi_init+0x0/0x8c returned 0 after 5 msecs [ 0.651848] calling misc_init+0x0/0x98 [ 0.652008] initcall misc_init+0x0/0x98 returned 0 after 0 msecs [ 0.652131] calling init_dvbdev+0x0/0xb9 [ 0.652282] initcall init_dvbdev+0x0/0xb9 returned 0 after 0 msecs [ 0.652392] calling init_scsi+0x0/0x7c [ 0.652784] SCSI subsystem initialized [ 0.652889] initcall init_scsi+0x0/0x7c returned 0 after 0 msecs [ 0.653025] calling ata_init+0x0/0x31f [ 0.653291] libata version 3.00 loaded. [ 0.653293] initcall ata_init+0x0/0x31f returned 0 after 0 msecs [ 0.653415] calling usb_init+0x0/0x122 [ 0.653658] usbcore: registered new interface driver usbfs [ 0.653805] usbcore: registered new interface driver hub [ 0.653971] usbcore: registered new device driver usb [ 0.654076] initcall usb_init+0x0/0x122 returned 0 after 0 msecs [ 0.654203] calling serio_init+0x0/0x89 [ 0.654394] initcall serio_init+0x0/0x89 returned 0 after 0 msecs [ 0.654509] calling input_init+0x0/0x107 [ 0.654672] initcall input_init+0x0/0x107 returned 0 after 0 msecs [ 0.654811] calling i2c_init+0x0/0x5f [ 0.655008] initcall i2c_init+0x0/0x5f returned 0 after 0 msecs [ 0.655126] calling power_supply_class_init+0x0/0x34 [ 0.655272] initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs [ 0.655484] calling hwmon_init+0x0/0x3b [ 0.655636] initcall hwmon_init+0x0/0x3b returned 0 after 0 msecs [ 0.655767] calling thermal_init+0x0/0x39 [ 0.655902] initcall thermal_init+0x0/0x39 returned 0 after 0 msecs [ 0.656028] calling md_init+0x0/0xd0 [ 0.656132] initcall md_init+0x0/0xd0 returned 0 after 0 msecs [ 0.656262] calling pci_subsys_init+0x0/0x12c [ 0.656358] PCI: Using ACPI for IRQ routing [ 0.656547] initcall pci_subsys_init+0x0/0x12c returned 0 after 0 msecs [ 0.656664] calling proto_init+0x0/0x2e [ 0.656762] initcall proto_init+0x0/0x2e returned 0 after 0 msecs [ 0.656878] calling net_dev_init+0x0/0x150 [ 0.657045] initcall net_dev_init+0x0/0x150 returned 0 after 0 msecs [ 0.657163] calling neigh_init+0x0/0x71 [ 0.657288] initcall neigh_init+0x0/0x71 returned 0 after 0 msecs [ 0.657405] calling fib_rules_init+0x0/0xa6 [ 0.657520] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs [ 0.657647] calling pktsched_init+0x0/0xc4 [ 0.657774] initcall pktsched_init+0x0/0xc4 returned 0 after 0 msecs [ 0.657911] calling tc_filter_init+0x0/0x4c [ 0.658030] initcall tc_filter_init+0x0/0x4c returned 0 after 0 msecs [ 0.658134] calling tc_action_init+0x0/0x4c [ 0.658243] initcall tc_action_init+0x0/0x4c returned 0 after 0 msecs [ 0.658363] calling genl_init+0x0/0xd9 [ 0.662984] initcall genl_init+0x0/0xd9 returned 0 after 4 msecs [ 0.663103] calling sysctl_init+0x0/0x2d [ 0.663209] initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs [ 0.663346] calling pci_iommu_init+0x0/0x17 [ 0.664923] DMAR:parse DMAR table failure. [ 0.664923] PCI-DMA: Disabling AGP. [ 0.792923] PCI-DMA: aperture base @ 80000000 size 1048576 KB [ 0.792923] init_memory_mapping [ 0.792923] 0080000000 - 00c0000000 page 1G [ 0.792923] last_map_addr: c0000000 end: c0000000 [ 0.793032] PCI-DMA: using GART IOMMU. [ 0.793141] PCI-DMA: Reserving 1024MB of IOMMU area in the AGP aperture [ 0.826923] initcall pci_iommu_init+0x0/0x17 returned 0 after 154 msecs [ 0.826923] calling hpet_late_init+0x0/0x114 [ 0.826923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.826923] hpet0: 3 32-bit timers, 25000000 Hz [ 0.827923] initcall hpet_late_init+0x0/0x114 returned 0 after 0 msecs [ 0.827923] calling clocksource_done_booting+0x0/0x12 [ 0.827923] initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs [ 0.828060] Switched to high resolution mode on CPU 0 [ 0.827449] Switched to high resolution mode on CPU 7 [ 0.828082] calling init_pipe_fs+0x0/0x4c [ 0.828327] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs [ 0.828447] calling init_mnt_writers+0x0/0x50 [ 0.828560] initcall init_mnt_writers+0x0/0x50 returned 0 after 0 msecs [ 0.828678] calling eventpoll_init+0x0/0x85 [ 0.828839] initcall eventpoll_init+0x0/0x85 returned 0 after 0 msecs [ 0.828960] calling anon_inode_init+0x0/0x115 [ 0.828457] Switched to high resolution mode on CPU 1 [ 0.829058] initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs [ 0.828429] Switched to high resolution mode on CPU 3 [ 0.828423] Switched to high resolution mode on CPU 5 [ 0.828418] Switched to high resolution mode on CPU 6 [ 0.828436] Switched to high resolution mode on CPU 4 [ 0.828444] Switched to high resolution mode on CPU 2 [ 0.829058] calling pcie_aspm_init+0x0/0x22 [ 0.832335] initcall pcie_aspm_init+0x0/0x22 returned 0 after 3 msecs [ 0.832456] calling acpi_event_init+0x0/0x52 [ 0.836117] initcall acpi_event_init+0x0/0x52 returned 0 after 3 msecs [ 0.836249] calling pnp_system_init+0x0/0x12 [ 0.836383] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.836493] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.836606] system 00:07: ioport range 0x2000-0x207f has been reserved [ 0.836713] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 0.836820] system 00:07: ioport range 0x2400-0x247f has been reserved [ 0.836927] system 00:07: ioport range 0x2480-0x24ff has been reserved [ 0.837002] system 00:07: ioport range 0x2800-0x287f has been reserved [ 0.837113] system 00:07: ioport range 0x2880-0x28ff has been reserved [ 0.837222] system 00:07: ioport range 0x2c00-0x2c7f has been reserved [ 0.837330] system 00:07: ioport range 0x2c80-0x2cff has been reserved [ 0.837431] system 00:07: iomem range 0xfdf80000-0xfdfbffff has been reserved [ 0.837533] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved [ 0.837731] system 00:09: ioport range 0xca0-0xcaf has been reserved [ 0.837832] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.838031] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.838231] system 00:0c: ioport range 0xa00-0xa7f has been reserved [ 0.838347] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.838537] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.838647] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.838754] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.838856] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 0.839045] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.839298] initcall pnp_system_init+0x0/0x12 returned 0 after 2 msecs [ 0.839425] calling chr_dev_init+0x0/0x98 [ 0.839914] initcall chr_dev_init+0x0/0x98 returned 0 after 0 msecs [ 0.840045] calling firmware_class_init+0x0/0x72 [ 0.840188] initcall firmware_class_init+0x0/0x72 returned 0 after 0 msecs [ 0.840319] calling loopback_init+0x0/0x12 [ 0.840503] initcall loopback_init+0x0/0x12 returned 0 after 0 msecs [ 0.840625] calling cpufreq_gov_performance_init+0x0/0x12 [ 0.840732] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs [ 0.840943] calling init_acpi_pm_clocksource+0x0/0xae [ 0.841054] initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs [ 0.841257] calling pcibios_assign_resources+0x0/0x87 [ 0.841436] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.841533] pci 0000:00:06.0: IO window: 0xc000-0xcfff [ 0.841641] pci 0000:00:06.0: MEM window: 0xfe800000-0xfe8fffff [ 0.841748] pci 0000:00:06.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff [ 0.841938] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.842035] pci 0000:00:0a.0: IO window: disabled [ 0.842152] pci 0000:00:0a.0: MEM window: disabled [ 0.842265] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.842373] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.842483] pci 0000:03:00.0: IO window: 0xd000-0xdfff [ 0.842582] pci 0000:03:00.0: MEM window: 0xfe900000-0xfe9fffff [ 0.842690] pci 0000:03:00.0: PREFETCH window: disabled [ 0.842809] pci 0000:03:00.1: PCI bridge, secondary bus 0000:05 [ 0.842905] pci 0000:03:00.1: IO window: disabled [ 0.843014] pci 0000:03:00.1: MEM window: 0xfea00000-0xfeafffff [ 0.843134] pci 0000:03:00.1: PREFETCH window: disabled [ 0.843245] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 0.843342] pci 0000:00:0d.0: IO window: 0xd000-0xdfff [ 0.843448] pci 0000:00:0d.0: MEM window: 0xfe900000-0xfeafffff [ 0.843547] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.843664] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06 [ 0.843760] pci 0000:00:0e.0: IO window: disabled [ 0.843866] pci 0000:00:0e.0: MEM window: disabled [ 0.843972] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.844082] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07 [ 0.844181] pci 0000:00:0f.0: IO window: 0xe000-0xefff [ 0.844288] pci 0000:00:0f.0: MEM window: 0xfeb00000-0xfebfffff [ 0.844395] pci 0000:00:0f.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.844601] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.844605] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.844610] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.844617] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 0.844625] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 0.844633] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.844637] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.844641] initcall pcibios_assign_resources+0x0/0x87 returned 0 after 3 msecs [ 0.844851] calling inet_init+0x0/0x428 [ 0.845049] NET: Registered protocol family 2 [ 0.856651] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.859685] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.863572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.864113] TCP: Hash tables configured (established 524288 bind 65536) [ 0.864223] TCP reno registered [ 0.867165] initcall inet_init+0x0/0x428 returned 0 after 21 msecs [ 0.867315] calling af_unix_init+0x0/0x55 [ 0.867439] NET: Registered protocol family 1 [ 0.867559] initcall af_unix_init+0x0/0x55 returned 0 after 0 msecs [ 0.867690] calling default_rootfs+0x0/0x6b [ 0.867825] initcall default_rootfs+0x0/0x6b returned 0 after 0 msecs [ 0.867955] calling i8259A_init_sysfs+0x0/0x22 [ 0.868166] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs [ 0.868306] calling vsyscall_init+0x0/0x6c [ 0.868430] initcall vsyscall_init+0x0/0x6c returned 0 after 0 msecs [ 0.868550] calling sbf_init+0x0/0xd7 [ 0.868656] initcall sbf_init+0x0/0xd7 returned 0 after 0 msecs [ 0.868785] calling i8237A_init_sysfs+0x0/0x22 [ 0.868977] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs [ 0.869116] calling add_rtc_cmos+0x0/0x1d [ 0.869232] initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs [ 0.869352] calling cache_sysfs_init+0x0/0x5d [ 0.871496] initcall cache_sysfs_init+0x0/0x5d returned 0 after 1 msecs [ 0.871645] calling mce_init_device+0x0/0x85 [ 0.872198] initcall mce_init_device+0x0/0x85 returned 0 after 0 msecs [ 0.872334] calling periodic_mcheck_init+0x0/0x3f [ 0.872462] initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs [ 0.872607] calling thermal_throttle_init_device+0x0/0x83 [ 0.872737] initcall thermal_throttle_init_device+0x0/0x83 returned 0 after 0 msecs [ 0.872961] calling threshold_init_device+0x0/0x49 [ 0.884582] initcall threshold_init_device+0x0/0x49 returned 0 after 0 msecs [ 0.884582] calling msr_init+0x0/0xf2 [ 0.884582] initcall msr_init+0x0/0xf2 returned 0 after 0 msecs [ 0.884582] calling cpuid_init+0x0/0xf2 [ 0.884582] initcall cpuid_init+0x0/0xf2 returned 0 after 0 msecs [ 0.884582] calling init_lapic_sysfs+0x0/0x2d [ 0.884582] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs [ 0.884582] calling ioapic_init_sysfs+0x0/0x99 [ 0.884582] initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs [ 0.884582] calling add_pcspkr+0x0/0x43 [ 0.884582] initcall add_pcspkr+0x0/0x43 returned 0 after 0 msecs [ 0.884582] calling uv_ptc_init+0x0/0x75 [ 0.884582] initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs [ 0.884582] calling uv_bau_init+0x0/0x5a1 [ 0.884582] initcall uv_bau_init+0x0/0x5a1 returned 0 after 0 msecs [ 0.884582] calling aes_init+0x0/0x12 [ 0.884582] initcall aes_init+0x0/0x12 returned 0 after 0 msecs [ 0.884582] calling init+0x0/0x12 [ 0.884582] initcall init+0x0/0x12 returned 0 after 0 msecs [ 0.884582] calling init_vdso_vars+0x0/0x1e7 [ 0.884582] initcall init_vdso_vars+0x0/0x1e7 returned 0 after 0 msecs [ 0.884582] calling ia32_binfmt_init+0x0/0x14 [ 0.884582] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs [ 0.884582] calling sysenter_setup+0x0/0x2b6 [ 0.884582] initcall sysenter_setup+0x0/0x2b6 returned 0 after 0 msecs [ 0.884582] calling create_proc_profile+0x0/0x2c7 [ 0.884582] initcall create_proc_profile+0x0/0x2c7 returned 0 after 0 msecs [ 0.884582] calling ioresources_init+0x0/0x3c [ 0.884582] initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs [ 0.884723] calling uid_cache_init+0x0/0x6e [ 0.884882] initcall uid_cache_init+0x0/0x6e returned 0 after 0 msecs [ 0.885028] calling init_posix_timers+0x0/0xb6 [ 0.885171] initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs [ 0.885250] calling init_posix_cpu_timers+0x0/0xd4 [ 0.885250] initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs [ 0.885250] calling nsproxy_cache_init+0x0/0x2d [ 0.885388] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs [ 0.885523] calling timekeeping_init_device+0x0/0x22 [ 0.885717] initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs [ 0.885952] calling init_clocksource_sysfs+0x0/0x50 [ 0.886156] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs [ 0.886293] calling init_timer_list_procfs+0x0/0x2c [ 0.886415] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs [ 0.886562] calling init_tstats_procfs+0x0/0x2c [ 0.886692] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs [ 0.886836] calling futex_init+0x0/0x63 [ 0.886968] initcall futex_init+0x0/0x63 returned 0 after 0 msecs [ 0.887102] calling proc_dma_init+0x0/0x22 [ 0.887229] initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs [ 0.887371] calling percpu_modinit+0x0/0x6e [ 0.887496] initcall percpu_modinit+0x0/0x6e returned 0 after 0 msecs [ 0.887641] calling kallsyms_init+0x0/0x25 [ 0.887762] initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs [ 0.887896] calling ikconfig_init+0x0/0x39 [ 0.888024] initcall ikconfig_init+0x0/0x39 returned 0 after 0 msecs [ 0.888158] calling init_kprobes+0x0/0x103 [ 0.890922] initcall init_kprobes+0x0/0x103 returned 0 after 2 msecs [ 0.891045] calling relay_init+0x0/0x14 [ 0.891172] initcall relay_init+0x0/0x14 returned 0 after 0 msecs [ 0.891251] calling utsname_sysctl_init+0x0/0x14 [ 0.891386] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 0.891525] calling init_per_zone_pages_min+0x0/0x53 [ 0.892864] initcall init_per_zone_pages_min+0x0/0x53 returned 0 after 1 msecs [ 0.893090] calling pdflush_init+0x0/0x1d [ 0.893289] initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs [ 0.893436] calling kswapd_init+0x0/0x63 [ 0.893626] initcall kswapd_init+0x0/0x63 returned 0 after 0 msecs [ 0.893784] calling setup_vmstat+0x0/0x4a [ 0.893912] initcall setup_vmstat+0x0/0x4a returned 0 after 0 msecs [ 0.894055] calling procswaps_init+0x0/0x22 [ 0.894176] initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs [ 0.894306] calling hugetlb_init+0x0/0xaa [ 0.894425] Total HugeTLB memory allocated, 0 [ 0.894546] initcall hugetlb_init+0x0/0xaa returned 0 after 0 msecs [ 0.894678] calling init_tmpfs+0x0/0xda [ 0.894849] initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs [ 0.894983] calling cpucache_init+0x0/0x39 [ 0.895120] initcall cpucache_init+0x0/0x39 returned 0 after 0 msecs [ 0.895266] calling fasync_init+0x0/0x2a [ 0.895411] initcall fasync_init+0x0/0x2a returned 0 after 0 msecs [ 0.895553] calling aio_setup+0x0/0x6e [ 0.895908] initcall aio_setup+0x0/0x6e returned 0 after 0 msecs [ 0.896053] calling inotify_setup+0x0/0x12 [ 0.896179] initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs [ 0.896315] calling inotify_user_setup+0x0/0xb8 [ 0.896479] initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs [ 0.896642] calling init_sys32_ioctl+0x0/0x83 [ 0.896776] initcall init_sys32_ioctl+0x0/0x83 returned 0 after 0 msecs [ 0.896910] calling init_mbcache+0x0/0x14 [ 0.897037] initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs [ 0.897169] calling dnotify_init+0x0/0x2a [ 0.897308] initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs [ 0.897451] calling init_devpts_fs+0x0/0x3f [ 0.897586] initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs [ 0.897720] calling init_ext3_fs+0x0/0x6a [ 0.897878] initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs [ 0.898012] calling journal_init+0x0/0x99 [ 0.898206] initcall journal_init+0x0/0x99 returned 0 after 0 msecs [ 0.898336] calling init_ext2_fs+0x0/0x6a [ 0.898488] initcall init_ext2_fs+0x0/0x6a returned 0 after 0 msecs [ 0.898621] calling init_ramfs_fs+0x0/0x12 [ 0.898739] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs [ 0.898861] calling init_hugetlbfs_fs+0x0/0x98 [ 0.899017] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs [ 0.899142] calling init_fat_fs+0x0/0x4f [ 0.899301] initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs [ 0.899425] calling init_msdos_fs+0x0/0x12 [ 0.899553] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs [ 0.899677] calling init_vfat_fs+0x0/0x12 [ 0.899804] initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs [ 0.899927] calling init_iso9660_fs+0x0/0x5a [ 0.900071] initcall init_iso9660_fs+0x0/0x5a returned 0 after 0 msecs [ 0.900194] calling init_nls_utf8+0x0/0x25 [ 0.900314] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs [ 0.900314] calling init_ntfs_fs+0x0/0x1d1 [ 0.900438] NTFS driver 2.1.29 [Flags: R/O]. [ 0.900644] initcall init_ntfs_fs+0x0/0x1d1 returned 0 after 0 msecs [ 0.900788] calling init_autofs4_fs+0x0/0x12 [ 0.900909] initcall init_autofs4_fs+0x0/0x12 returned 0 after 0 msecs [ 0.901042] calling init_udf_fs+0x0/0x5b [ 0.901178] initcall init_udf_fs+0x0/0x5b returned 0 after 0 msecs [ 0.901312] calling ipc_init+0x0/0x23 [ 0.901427] msgmni has been set to 32301 [ 0.901550] initcall ipc_init+0x0/0x23 returned 0 after 0 msecs [ 0.901683] calling ipc_sysctl_init+0x0/0x14 [ 0.901832] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 0.901956] calling init_mqueue_fs+0x0/0xc6 [ 0.902122] initcall init_mqueue_fs+0x0/0xc6 returned 0 after 0 msecs [ 0.902246] calling crypto_algapi_init+0x0/0xd [ 0.902377] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs [ 0.902500] calling blkcipher_module_init+0x0/0x2a [ 0.902637] initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs [ 0.902770] calling cryptomgr_init+0x0/0x12 [ 0.902888] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs [ 0.903030] calling hmac_module_init+0x0/0x12 [ 0.903149] initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs [ 0.903276] calling md5_mod_init+0x0/0x12 [ 0.903281] initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.903424] calling rmd128_mod_init+0x0/0x12 [ 0.903549] initcall rmd128_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.903682] calling rmd160_mod_init+0x0/0x12 [ 0.903800] initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.903932] calling rmd256_mod_init+0x0/0x12 [ 0.904052] initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904186] calling rmd320_mod_init+0x0/0x12 [ 0.904298] initcall rmd320_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904427] calling sha1_generic_mod_init+0x0/0x12 [ 0.904555] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904698] calling sha256_generic_mod_init+0x0/0x3f [ 0.904818] initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 0.911054] calling sha512_generic_mod_init+0x0/0x3f [ 0.911182] initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 0.911408] calling crypto_cbc_module_init+0x0/0x12 [ 0.911529] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs [ 0.911662] calling blowfish_mod_init+0x0/0x12 [ 0.911781] initcall blowfish_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.911923] calling aes_init+0x0/0x323 [ 0.912055] initcall aes_init+0x0/0x323 returned 0 after 0 msecs [ 0.912188] calling lzo_mod_init+0x0/0x12 [ 0.912316] initcall lzo_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.912440] calling async_tx_init+0x0/0x16 [ 0.912575] async_tx: api initialized (sync-only) [ 0.912694] initcall async_tx_init+0x0/0x16 returned 0 after 0 msecs [ 0.912817] calling async_memcpy_init+0x0/0x8 [ 0.912935] initcall async_memcpy_init+0x0/0x8 returned 0 after 0 msecs [ 0.913067] calling async_xor_init+0x0/0x8 [ 0.913185] initcall async_xor_init+0x0/0x8 returned 0 after 0 msecs [ 0.913322] calling noop_init+0x0/0x14 [ 0.913440] io scheduler noop registered [ 0.913557] initcall noop_init+0x0/0x14 returned 0 after 0 msecs [ 0.913689] calling deadline_init+0x0/0x14 [ 0.913806] io scheduler deadline registered [ 0.913924] initcall deadline_init+0x0/0x14 returned 0 after 0 msecs [ 0.914056] calling cfq_init+0x0/0x9d [ 0.914209] io scheduler cfq registered (default) [ 0.914321] initcall cfq_init+0x0/0x9d returned 0 after 0 msecs [ 0.914455] calling percpu_counter_startup+0x0/0x14 [ 0.914582] initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs [ 0.914725] calling pci_init+0x0/0x35 [ 0.914891] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.958445] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.958592] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:05.2: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.958710] pci 0000:07:00.0: Boot video device [ 0.958710] initcall pci_init+0x0/0x35 returned 0 after 22 msecs [ 0.958710] calling pci_proc_init+0x0/0x6a [ 0.958710] initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs [ 0.958710] calling pcie_portdrv_init+0x0/0x4d [ 0.939223] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.939249] pcieport-driver 0000:00:0a.0: found MSI capability [ 0.939374] pci_express 0000:00:0a.0:pcie00: allocate port service [ 0.939431] pci_express 0000:00:0a.0:pcie01: allocate port service [ 0.939472] pci_express 0000:00:0a.0:pcie03: allocate port service [ 0.939549] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.939574] pcieport-driver 0000:00:0d.0: found MSI capability [ 0.939705] pci_express 0000:00:0d.0:pcie00: allocate port service [ 0.939747] pci_express 0000:00:0d.0:pcie01: allocate port service [ 0.939790] pci_express 0000:00:0d.0:pcie03: allocate port service [ 0.939872] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.939893] pcieport-driver 0000:00:0e.0: found MSI capability [ 0.940030] pci_express 0000:00:0e.0:pcie00: allocate port service [ 0.940078] pci_express 0000:00:0e.0:pcie01: allocate port service [ 0.940118] pci_express 0000:00:0e.0:pcie03: allocate port service [ 0.940210] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.940231] pcieport-driver 0000:00:0f.0: found MSI capability [ 0.940379] pci_express 0000:00:0f.0:pcie00: allocate port service [ 0.940420] pci_express 0000:00:0f.0:pcie01: allocate port service [ 0.940460] pci_express 0000:00:0f.0:pcie03: allocate port service [ 0.940627] initcall pcie_portdrv_init+0x0/0x4d returned 0 after 1 msecs [ 0.940766] calling aer_service_init+0x0/0x20 [ 0.944284] aer 0000:00:0a.0:pcie01: service driver aer loaded [ 0.947673] aer 0000:00:0d.0:pcie01: service driver aer loaded [ 0.951065] aer 0000:00:0e.0:pcie01: service driver aer loaded [ 0.954400] aer 0000:00:0f.0:pcie01: service driver aer loaded [ 0.954458] initcall aer_service_init+0x0/0x20 returned 0 after 12 msecs [ 0.954605] calling fb_console_init+0x0/0x129 [ 0.954772] initcall fb_console_init+0x0/0x129 returned 0 after 0 msecs [ 0.954893] calling vesafb_init+0x0/0x235 [ 0.955099] initcall vesafb_init+0x0/0x235 returned 0 after 0 msecs [ 0.955232] calling acpi_reserve_resources+0x0/0xeb [ 0.955334] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs [ 0.955467] calling acpi_button_init+0x0/0x5e [ 0.955678] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.955871] ACPI: Power Button (FF) [PWRF] [ 0.956118] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.956318] ACPI: Power Button (CM) [PWRB] [ 0.956477] initcall acpi_button_init+0x0/0x5e returned 0 after 0 msecs [ 0.956597] calling acpi_fan_init+0x0/0x32 [ 0.956771] initcall acpi_fan_init+0x0/0x32 returned 0 after 0 msecs [ 0.956893] calling acpi_video_init+0x0/0x5e [ 0.957088] initcall acpi_video_init+0x0/0x5e returned 0 after 0 msecs [ 0.957217] calling irqrouter_init_sysfs+0x0/0x38 [ 0.957403] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs [ 0.957535] calling acpi_pci_slot_init+0x0/0x20 [ 0.957827] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 0 msecs [ 0.957960] calling acpi_processor_init+0x0/0xe9 [ 0.958490] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.958961] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.959441] ACPI: ACPI0007:02 is registered as cooling_device2 [ 0.959920] ACPI: ACPI0007:03 is registered as cooling_device3 [ 0.960414] ACPI: ACPI0007:04 is registered as cooling_device4 [ 0.960901] ACPI: ACPI0007:05 is registered as cooling_device5 [ 0.961377] ACPI: ACPI0007:06 is registered as cooling_device6 [ 0.961865] ACPI: ACPI0007:07 is registered as cooling_device7 [ 0.962078] initcall acpi_processor_init+0x0/0xe9 returned 0 after 3 msecs [ 0.962211] calling acpi_container_init+0x0/0x42 [ 0.966490] initcall acpi_container_init+0x0/0x42 returned 0 after 3 msecs [ 0.966602] calling acpi_thermal_init+0x0/0x83 [ 0.966798] initcall acpi_thermal_init+0x0/0x83 returned 0 after 0 msecs [ 0.966931] calling rand_initialize+0x0/0x2c [ 0.967055] initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs [ 0.967186] calling tty_init+0x0/0x1c5 [ 0.978055] initcall tty_init+0x0/0x1c5 returned 0 after 10 msecs [ 0.978185] calling pty_init+0x0/0x46e [ 1.011379] initcall pty_init+0x0/0x46e returned 0 after 31 msecs [ 1.011508] calling rtc_init+0x0/0xa6 [ 1.011673] Real Time Clock Driver v1.12ac [ 1.011780] initcall rtc_init+0x0/0xa6 returned 0 after 0 msecs [ 1.011899] calling hpet_init+0x0/0x6a [ 1.012181] hpet_resources: 0xfed00000 is busy [ 1.012259] initcall hpet_init+0x0/0x6a returned 0 after 0 msecs [ 1.012386] calling agp_init+0x0/0x26 [ 1.012491] Linux agpgart interface v0.103 [ 1.012597] initcall agp_init+0x0/0x26 returned 0 after 0 msecs [ 1.012715] calling hangcheck_init+0x0/0x89 [ 1.012831] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.013016] Hangcheck: Using get_cycles(). [ 1.013118] initcall hangcheck_init+0x0/0x89 returned 0 after 0 msecs [ 1.013236] calling serial8250_init+0x0/0x131 [ 1.013342] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 1.013664] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.013939] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.014305] initcall serial8250_init+0x0/0x131 returned 0 after 0 msecs [ 1.014432] calling serial8250_pnp_init+0x0/0x12 [ 1.014809] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.015203] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.015462] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 0 msecs [ 1.015581] calling serial8250_pci_init+0x0/0x1b [ 1.015785] initcall serial8250_pci_init+0x0/0x1b returned 0 after 0 msecs [ 1.015906] calling topology_sysfs_init+0x0/0x49 [ 1.016048] initcall topology_sysfs_init+0x0/0x49 returned 0 after 0 msecs [ 1.016179] calling brd_init+0x0/0x18e [ 1.017970] brd: module loaded [ 1.018098] initcall brd_init+0x0/0x18e returned 0 after 1 msecs [ 1.018228] calling loop_init+0x0/0x1a1 [ 1.019180] loop: module loaded [ 1.019287] initcall loop_init+0x0/0x1a1 returned 0 after 0 msecs [ 1.019408] calling e1000_init_module+0x0/0x88 [ 1.019515] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.019622] Copyright (c) 1999-2006 Intel Corporation. [ 1.020145] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 1.020259] e1000 0000:04:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 1.284901] e1000: 0000:04:00.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:a8:25:f0 [ 1.311862] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.312351] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 1.312461] e1000 0000:04:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 1.576798] e1000: 0000:04:00.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:a8:25:f1 [ 1.603662] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.603821] initcall e1000_init_module+0x0/0x88 returned 0 after 557 msecs [ 1.603943] calling net_olddevs_init+0x0/0xa0 [ 1.604070] initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs [ 1.609299] calling init_nic+0x0/0x1b [ 1.609423] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 1.609978] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 1.610090] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 1.610280] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 1.611545] forcedeth 0000:00:08.0: ifname eth2, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:2b:ec [ 1.611738] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 1.612284] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 22 [ 1.612396] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 22 (level, low) -> IRQ 22 [ 1.612588] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 1.613819] forcedeth 0000:00:09.0: ifname eth3, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:2b:ed [ 1.614012] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 1.614272] initcall init_nic+0x0/0x1b returned 0 after 4 msecs [ 1.614404] calling videodev_init+0x0/0x7d [ 1.614509] Linux video capture interface: v2.00 [ 1.614656] initcall videodev_init+0x0/0x7d returned 0 after 0 msecs [ 1.614767] calling v4l2_i2c_drv_init+0x0/0x104 [ 1.614960] initcall v4l2_i2c_drv_init+0x0/0x104 returned 0 after 0 msecs [ 1.615099] calling ir_init+0x0/0x14 [ 1.615251] initcall ir_init+0x0/0x14 returned 0 after 0 msecs [ 1.615373] calling saa7134_init+0x0/0x4a [ 1.615481] saa7130/34: v4l2 driver version 0.2.14 loaded [ 1.615646] saa7134 0000:05:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 1.615849] saa7134[0]: found at 0000:05:00.0, rev: 1, irq: 19, latency: 64, mmio: 0xfeaffc00 [ 1.616044] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected] [ 1.616250] saa7134[0]: board init: gpio is cc06000 [ 1.718976] tda829x_probe: driver disabled by Kconfig [ 1.719091] tuner' 0-0043: chip found @ 0x86 (saa7134[0]) [ 1.719198] tda9887 0-0043: creating new instance [ 1.719304] tda9887 0-0043: tda988[5/6/7] found [ 1.719409] tuner' 0-0043: type set to tda9887 [ 1.719412] tuner' 0-0043: tv freq set to 0.00 [ 1.719414] tuner' 0-0043: TV freq (0.00) out of range (44-958) [ 1.721974] tuner' 0-0043: saa7134[0] tuner' I2C addr 0x86 with type 74 used for 0x0e [ 1.723977] tea5767_autodetection: not probed - driver disabled by Kconfig [ 1.724088] tuner' 0-0060: Setting mode_mask to 0x0e [ 1.724089] tuner' 0-0060: chip found @ 0xc0 (saa7134[0]) [ 1.724186] tuner' 0-0060: tuner 0x60: Tuner type absent [ 1.765974] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 [ 1.766364] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff [ 1.766749] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff [ 1.767138] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.767513] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff [ 1.767889] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.768306] saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 11 e1 a1 ff ff ff ff ff ff ff ff [ 1.768690] saa7134[0]: i2c eeprom 70: 00 30 8d 18 3b 02 ff ff 74 50 ff ff ff ff ff ff [ 1.769088] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.769463] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.769839] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.770248] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.770624] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.771022] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.771397] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.771782] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.772276] tuner' 0-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00 [ 1.772280] tuner' 0-0043: set addr discarded for type 74, mask e. Asked to change tuner at addr 0xff, with mask e [ 1.772283] tuner' 0-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00 [ 1.772285] tuner' 0-0060: defining GPIO callback [ 1.779974] mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=1c [ 1.787972] mt20xx 0-0060: microtune MT2050 found, OK [ 1.788070] tuner' 0-0060: type set to MT2050 [ 1.788082] tuner' 0-0060: tv freq set to 400.00 [ 1.792972] tuner' 0-0060: saa7134[0] tuner' I2C addr 0xc0 with type 33 used for 0x0e [ 1.794973] tuner' 0-0043: switching to v4l2 [ 1.794975] tuner' 0-0060: switching to v4l2 [ 1.794977] tuner' 0-0060: tv freq set to 400.00 [ 1.799972] tuner' 0-0060: tv freq set to 400.00 [ 1.805088] saa7134[0]: registered device video0 [v4l2] [ 1.805240] saa7134[0]: registered device vbi0 [ 1.805352] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 1.807972] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 1.808025] initcall saa7134_init+0x0/0x4a returned 0 after 183 msecs [ 1.808166] calling empress_register+0x0/0x12 [ 1.808276] initcall empress_register+0x0/0x12 returned 0 after 0 msecs [ 1.808405] calling saa6752hs_init_module+0x0/0x14 [ 1.808700] initcall saa6752hs_init_module+0x0/0x14 returned 0 after 0 msecs [ 1.808823] calling dvb_register+0x0/0x12 [ 1.810975] DVB: registering new adapter (saa7134[0]) [ 1.811086] DVB: registering frontend 0 (Zarlink MT352 DVB-T)... [ 1.850971] initcall dvb_register+0x0/0x12 returned 0 after 40 msecs [ 1.851100] calling ide_init+0x0/0x76 [ 1.851205] Uniform Multi-Platform E-IDE driver [ 1.851405] initcall ide_init+0x0/0x76 returned 0 after 0 msecs [ 1.851525] calling amd74xx_ide_init+0x0/0x1b [ 1.851649] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 1.851759] NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0 [ 1.851964] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 1.852074] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. [ 1.852267] NFORCE-MCP55: IDE port disabled [ 1.852377] ide0: BM-DMA at 0xffa0-0xffa7 [ 1.852486] Probing IDE interface ide0... [ 2.524043] hda: PIONEER DVD-RW DVR-110, ATAPI CD/DVD-ROM drive [ 3.135993] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.136107] hda: UDMA/66 mode selected [ 3.136461] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.138566] initcall amd74xx_ide_init+0x0/0x1b returned 0 after 1227 msecs [ 3.138686] calling idedisk_init+0x0/0x12 [ 3.138845] initcall idedisk_init+0x0/0x12 returned 0 after 0 msecs [ 3.138980] calling ide_cdrom_init+0x0/0x12 [ 3.139701] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache [ 3.139964] Uniform CD-ROM driver Revision: 3.20 [ 3.157180] initcall ide_cdrom_init+0x0/0x12 returned 0 after 17 msecs [ 3.157327] calling sas_transport_init+0x0/0xbb [ 3.157677] initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs [ 3.157803] calling megasas_init+0x0/0x160 [ 3.157931] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 [ 3.158149] initcall megasas_init+0x0/0x160 returned 0 after 0 msecs [ 3.158280] calling init_sd+0x0/0xff [ 3.158440] Driver 'sd' needs updating - please use bus_type methods [ 3.158602] initcall init_sd+0x0/0xff returned 0 after 0 msecs [ 3.158745] calling init_sg+0x0/0xbf [ 3.158910] initcall init_sg+0x0/0xbf returned 0 after 0 msecs [ 3.159034] calling ahci_init+0x0/0x1b [ 3.159225] initcall ahci_init+0x0/0x1b returned 0 after 0 msecs [ 3.159368] calling nv_init+0x0/0x1b [ 3.159475] sata_nv 0000:00:05.0: version 3.5 [ 3.159847] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 3.159962] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 3.160155] sata_nv 0000:00:05.0: Using SWNCQ mode [ 3.160619] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 3.160728] scsi0 : sata_nv [ 3.161018] scsi1 : sata_nv [ 3.161330] ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21 [ 3.161445] ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21 [ 3.616912] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.620271] ata1.00: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133 [ 3.620400] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.624238] ata1.00: configured for UDMA/133 [ 3.939298] ata2: SATA link down (SStatus 0 SControl 300) [ 3.944581] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5 [ 3.945502] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 3.945502] sd 0:0:0:0: [sda] Write Protect is off [ 3.945502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.945502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.945502] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 3.945502] sd 0:0:0:0: [sda] Write Protect is off [ 3.945502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.945502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.945502] sda: sda1 sda2 [ 3.950016] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.955126] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.955621] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 3.955739] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 3.955930] sata_nv 0000:00:05.1: Using SWNCQ mode [ 3.956403] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 3.956505] scsi2 : sata_nv [ 3.956731] scsi3 : sata_nv [ 3.957051] ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 20 [ 3.957156] ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 20 [ 4.412888] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.435247] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 4.435386] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.441993] ata3.00: configured for UDMA/133 [ 4.757278] ata4: SATA link down (SStatus 0 SControl 300) [ 4.757702] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 4.757978] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 4.758185] sd 2:0:0:0: [sdb] Write Protect is off [ 4.758281] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.758319] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.758558] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 4.758756] sd 2:0:0:0: [sdb] Write Protect is off [ 4.758856] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.758901] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.759115] sdb: sdb1 sdb2 sdb3 [ 4.762009] sd 2:0:0:0: [sdb] Attached SCSI disk [ 4.762220] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.762669] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23 [ 4.762779] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 23 (level, low) -> IRQ 23 [ 4.762968] sata_nv 0000:00:05.2: Using SWNCQ mode [ 4.763428] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 4.763531] scsi4 : sata_nv [ 4.763761] scsi5 : sata_nv [ 4.764091] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 23 [ 4.764207] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 23 [ 5.219872] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.250710] ata5.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 5.250837] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.256852] ata5.00: configured for UDMA/133 [ 5.572248] ata6: SATA link down (SStatus 0 SControl 300) [ 5.572584] scsi 4:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 5.572942] sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 5.573150] sd 4:0:0:0: [sdc] Write Protect is off [ 5.573248] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.573274] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.573520] sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 5.573720] sd 4:0:0:0: [sdc] Write Protect is off [ 5.573826] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.573862] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.574069] sdc: sdc1 sdc2 sdc3 [ 5.577436] sd 4:0:0:0: [sdc] Attached SCSI disk [ 5.577646] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 5.577820] initcall nv_init+0x0/0x1b returned 0 after 2306 msecs [ 5.577961] calling fusion_init+0x0/0xf8 [ 5.578073] Fusion MPT base driver 3.04.07 [ 5.578181] Copyright (c) 1999-2008 LSI Corporation [ 5.578296] initcall fusion_init+0x0/0xf8 returned 0 after 0 msecs [ 5.578428] calling mptsas_init+0x0/0xf5 [ 5.578533] Fusion MPT SAS Host driver 3.04.07 [ 5.578711] initcall mptsas_init+0x0/0xf5 returned 0 after 0 msecs [ 5.578832] calling mptctl_init+0x0/0x105 [ 5.578936] Fusion MPT misc device (ioctl) driver 3.04.07 [ 5.579091] mptctl: Registered with Fusion MPT base driver [ 5.579202] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.579299] initcall mptctl_init+0x0/0x105 returned 0 after 0 msecs [ 5.579421] calling ieee1394_init+0x0/0x256 [ 5.579816] initcall ieee1394_init+0x0/0x256 returned 0 after 0 msecs [ 5.579946] calling ohci1394_init+0x0/0x1b [ 5.580107] initcall ohci1394_init+0x0/0x1b returned 0 after 0 msecs [ 5.580228] calling video1394_init_module+0x0/0xc6 [ 5.580378] video1394: Installed video1394 module [ 5.580489] initcall video1394_init_module+0x0/0xc6 returned 0 after 0 msecs [ 5.580608] calling init_raw1394+0x0/0xf2 [ 5.580762] ieee1394: raw1394: /dev/raw1394 device initialized [ 5.580912] initcall init_raw1394+0x0/0xf2 returned 0 after 0 msecs [ 5.581050] calling sbp2_module_init+0x0/0x72 [ 5.581205] initcall sbp2_module_init+0x0/0x72 returned 0 after 0 msecs [ 5.581336] calling ether1394_init_module+0x0/0x70 [ 5.581508] initcall ether1394_init_module+0x0/0x70 returned 0 after 0 msecs [ 5.581629] calling cdrom_init+0x0/0xd [ 5.581744] initcall cdrom_init+0x0/0xd returned 0 after 0 msecs [ 5.581865] calling mon_init+0x0/0x103 [ 5.582075] initcall mon_init+0x0/0x103 returned 0 after 0 msecs [ 5.582197] calling ehci_hcd_init+0x0/0x8b [ 5.582295] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 5.582658] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 5.582767] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 5.582980] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 5.582982] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 5.583152] drivers/usb/core/inode.c: creating file 'devices' [ 5.583158] drivers/usb/core/inode.c: creating file '001' [ 5.583207] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 5.583404] ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10 [ 5.583413] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 [ 5.583418] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park [ 5.583432] ehci_hcd 0000:00:02.1: park 0 [ 5.583436] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 5.583444] ehci_hcd 0000:00:02.1: debug port 1 [ 5.583553] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 5.583555] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 5.583568] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfdffac00 [ 5.583678] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 5.583684] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 5.588990] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.589211] usb usb1: default language 0x0409 [ 5.589242] usb usb1: uevent [ 5.589287] usb usb1: usb_probe_device [ 5.589289] usb usb1: configuration #1 chosen from 1 choice [ 5.589403] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 5.589416] usb 1-0:1.0: uevent [ 5.589459] hub 1-0:1.0: usb_probe_interface [ 5.589461] hub 1-0:1.0: usb_probe_interface - got id [ 5.589463] hub 1-0:1.0: USB hub found [ 5.589576] hub 1-0:1.0: 10 ports detected [ 5.589688] hub 1-0:1.0: standalone hub [ 5.589689] hub 1-0:1.0: no power switching (usb 1.0) [ 5.589691] hub 1-0:1.0: individual port over-current protection [ 5.589693] hub 1-0:1.0: power on to power good time: 20ms [ 5.589697] hub 1-0:1.0: local power source is good [ 5.589700] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 5.690006] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 5.690098] drivers/usb/core/inode.c: creating file '001' [ 5.690109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.690217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.690406] usb usb1: Product: EHCI Host Controller [ 5.690512] usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd [ 5.690618] usb usb1: SerialNumber: 0000:00:02.1 [ 5.690756] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 5.690762] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s [ 5.690782] initcall ehci_hcd_init+0x0/0x8b returned 0 after 103 msecs [ 5.690913] calling ohci_hcd_mod_init+0x0/0xa4 [ 5.691023] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.691026] ohci_hcd: block sizes: ed 80 td 96 [ 5.691369] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 5.691476] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 5.691674] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 5.691676] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 5.691832] drivers/usb/core/inode.c: creating file '002' [ 5.691882] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 5.692086] ohci_hcd 0000:00:02.0: created debug files [ 5.692088] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 5.692092] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfdffb000 [ 5.744995] ohci_hcd 0000:00:02.0: OHCI controller state [ 5.744999] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 5.745002] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 5.745005] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 5.745007] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 5.745010] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH [ 5.745015] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 5.745019] ohci_hcd 0000:00:02.0: roothub.a 0100120a POTPGT=1 NOCP NPS NDP=10(10) [ 5.745022] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 5.745025] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 5.745029] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 5.745032] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 5.745035] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 5.745038] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 5.745041] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 5.745044] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 5.745048] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS [ 5.745051] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS [ 5.745054] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS [ 5.745057] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS [ 5.745064] usb usb2: default language 0x0409 [ 5.745094] usb usb2: uevent [ 5.745140] usb usb2: usb_probe_device [ 5.745142] usb usb2: configuration #1 chosen from 1 choice [ 5.745257] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.745267] usb 2-0:1.0: uevent [ 5.745312] hub 2-0:1.0: usb_probe_interface [ 5.745313] hub 2-0:1.0: usb_probe_interface - got id [ 5.745315] hub 2-0:1.0: USB hub found [ 5.745428] hub 2-0:1.0: 10 ports detected [ 5.745530] hub 2-0:1.0: standalone hub [ 5.745532] hub 2-0:1.0: no power switching (usb 1.0) [ 5.745543] hub 2-0:1.0: no over-current protection [ 5.745544] hub 2-0:1.0: power on to power good time: 2ms [ 5.745549] hub 2-0:1.0: local power source is good [ 5.745551] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 5.793980] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [ 5.845230] ehci_hcd 0000:00:02.1: port 1 high speed [ 5.845233] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 5.846039] drivers/usb/core/inode.c: creating file '001' [ 5.846047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.846147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.846340] usb usb2: Product: OHCI Host Controller [ 5.846445] usb usb2: Manufacturer: Linux 2.6.26 ohci_hcd [ 5.846551] usb usb2: SerialNumber: 0000:00:02.0 [ 5.846733] initcall ohci_hcd_mod_init+0x0/0xa4 returned 0 after 148 msecs [ 5.846854] calling usblp_init+0x0/0x1b [ 5.895986] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.947046] ehci_hcd 0000:00:02.1: port 1 high speed [ 5.947051] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 6.010921] usb 1-1: uevent [ 6.010970] usb 1-1: usb_probe_device [ 6.010972] usb 1-1: configuration #1 chosen from 1 choice [ 6.011132] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 6.011144] usb 1-1:1.0: uevent [ 6.011188] hub 1-1:1.0: usb_probe_interface [ 6.011190] hub 1-1:1.0: usb_probe_interface - got id [ 6.011192] hub 1-1:1.0: USB hub found [ 6.011382] hub 1-1:1.0: 2 ports detected [ 6.011494] hub 1-1:1.0: compound device; port removable status: FR [ 6.011500] hub 1-1:1.0: individual port power switching [ 6.011501] hub 1-1:1.0: individual port over-current protection [ 6.011503] hub 1-1:1.0: Single TT [ 6.011505] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 6.011507] hub 1-1:1.0: power on to power good time: 100ms [ 6.011755] hub 1-1:1.0: local power source is good [ 6.011758] hub 1-1:1.0: enabling power on all ports [ 6.112798] usb 1-1: link qh256-0001/ffff88007f808140 start 255 [1/0 us] [ 6.112866] drivers/usb/core/inode.c: creating file '002' [ 6.112883] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 6.113006] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.113143] ehci_hcd 0000:00:02.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 6.113148] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s [ 6.216796] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 [ 6.267782] ehci_hcd 0000:00:02.1: port 3 full speed --> companion [ 6.267785] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT [ 6.267812] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 6.318795] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003802 POWER OWNER sig=j CSC [ 6.318824] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 6.318835] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS [ 6.318839] hub 2-0:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 6.422778] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 6.528790] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 6.579788] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 6.687786] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 6.751780] usb 2-3: ep0 maxpacket = 8 [ 6.773805] usb 2-3: default language 0x0409 [ 6.784828] usb 2-3: uevent [ 6.784871] usb 2-3: usb_probe_device [ 6.784873] usb 2-3: configuration #1 chosen from 1 choice [ 6.787804] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 6.787815] usb 2-3:1.0: uevent [ 6.787952] drivers/usb/core/inode.c: creating file '002' [ 6.787960] usb 2-3: New USB device found, idVendor=04f9, idProduct=0027 [ 6.788071] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.788216] usb 2-3: Product: HL-2030 series [ 6.788335] usb 2-3: Manufacturer: Brother [ 6.788446] usb 2-3: SerialNumber: E6J824776 [ 6.788593] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0006 [ 6.788865] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 6.892617] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 6.903614] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 6.965619] usb 1-1.1: new high speed USB device using ehci_hcd and address 4 [ 6.978613] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 7.053885] usb 1-1.1: uevent [ 7.053929] usb 1-1.1: usb_probe_device [ 7.053930] usb 1-1.1: configuration #1 chosen from 1 choice [ 7.054110] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 7.054120] usb 1-1.1:1.0: uevent [ 7.054163] hub 1-1.1:1.0: usb_probe_interface [ 7.054164] hub 1-1.1:1.0: usb_probe_interface - got id [ 7.054166] hub 1-1.1:1.0: USB hub found [ 7.054360] hub 1-1.1:1.0: 4 ports detected [ 7.060458] hub 1-1.1:1.0: compound device; port removable status: FRRR [ 7.060460] hub 1-1.1:1.0: ganged power switching [ 7.060462] hub 1-1.1:1.0: global over-current protection [ 7.060661] hub 1-1.1:1.0: TT per port [ 7.060662] hub 1-1.1:1.0: TT requires at most 8 FS bit times (666 ns) [ 7.060664] hub 1-1.1:1.0: power on to power good time: 100ms [ 7.060859] hub 1-1.1:1.0: local power source is good [ 7.060861] hub 1-1.1:1.0: no over-current condition exists [ 7.060863] hub 1-1.1:1.0: enabling power on all ports [ 7.161775] usb 1-1.1: link qh256-0001/ffff88007f808280 start 255 [1/0 us] [ 7.161779] drivers/usb/core/inode.c: creating file '004' [ 7.161788] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2602 [ 7.161911] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.162359] hub 1-1:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 7.266611] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 7.277606] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 7.339611] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 7.356604] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 7.567601] usb 1-1.2: skipped 1 descriptor after configuration [ 7.567604] usb 1-1.2: skipped 11 descriptors after interface [ 7.567606] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.567608] usb 1-1.2: skipped 17 descriptors after interface [ 7.567612] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.567614] usb 1-1.2: skipped 4 descriptors after interface [ 7.567616] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.567618] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.567620] usb 1-1.2: skipped 2 descriptors after interface [ 7.567622] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.569975] usb 1-1.2: default language 0x0409 [ 7.573619] usb 1-1.2: uevent [ 7.573662] usb 1-1.2: usb_probe_device [ 7.573664] usb 1-1.2: configuration #1 chosen from 1 choice [ 7.573850] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 7.573868] usb 1-1.2:1.0: uevent [ 7.573955] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) [ 7.573969] usb 1-1.2:1.1: uevent [ 7.574007] usb 1-1.2: adding 1-1.2:1.2 (config #1, interface 2) [ 7.574020] usb 1-1.2:1.2: uevent [ 7.574058] usb 1-1.2: adding 1-1.2:1.3 (config #1, interface 3) [ 7.574073] usb 1-1.2:1.3: uevent [ 7.574113] drivers/usb/core/inode.c: creating file '005' [ 7.574121] usb 1-1.2: New USB device found, idVendor=046d, idProduct=08ce [ 7.574250] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 7.574451] usb 1-1.2: SerialNumber: 48ADA3A2 [ 7.574562] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 7.574569] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 7.574573] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0004 [ 7.574780] usblp 2-3:1.0: usb_probe_interface [ 7.574782] usblp 2-3:1.0: usb_probe_interface - got id [ 7.575602] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0006 [ 7.575849] hub 1-1.1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 7.580785] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 7.580885] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027 [ 7.680603] hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 7.691597] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms [ 7.753602] usb 1-1.1.1: new high speed USB device using ehci_hcd and address 6 [ 7.772595] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms [ 7.867720] usb 1-1.1.1: skipped 1 descriptor after endpoint [ 7.875347] usb 1-1.1.1: default language 0x0409 [ 7.917365] usb 1-1.1.1: uevent [ 7.917409] usb 1-1.1.1: usb_probe_device [ 7.917410] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 7.917591] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0) [ 7.917603] usb 1-1.1.1:1.0: uevent [ 7.917738] drivers/usb/core/inode.c: creating file '006' [ 7.917746] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 7.917861] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.918063] usb 1-1.1.1: Product: Flash Card Reader [ 7.918184] usb 1-1.1.1: Manufacturer: Generic [ 7.918297] usb 1-1.1.1: SerialNumber: 071031504947 [ 7.918716] hub 1-1.1:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 8.023596] hub 1-1.1:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 8.034590] hub 1-1.1:1.0: port 2 not reset yet, waiting 10ms [ 8.096594] usb 1-1.1.2: new low speed USB device using ehci_hcd and address 7 [ 8.109588] hub 1-1.1:1.0: port 2 not reset yet, waiting 10ms [ 8.188335] usb 1-1.1.2: skipped 1 descriptor after interface [ 8.188836] usb 1-1.1.2: default language 0x0409 [ 8.191121] usb 1-1.1.2: uevent [ 8.191163] usb 1-1.1.2: usb_probe_device [ 8.191165] usb 1-1.1.2: configuration #1 chosen from 1 choice [ 8.191711] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0) [ 8.191722] usb 1-1.1.2:1.0: uevent [ 8.191817] drivers/usb/core/inode.c: creating file '007' [ 8.191825] usb 1-1.1.2: New USB device found, idVendor=046d, idProduct=c044 [ 8.191941] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.192142] usb 1-1.1.2: Product: USB-PS/2 Optical Mouse [ 8.192256] usb 1-1.1.2: Manufacturer: Logitech [ 8.192710] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0004 [ 8.192891] usbcore: registered new interface driver usblp [ 8.193008] initcall usblp_init+0x0/0x1b returned 0 after 2237 msecs [ 8.193137] calling usb_stor_init+0x0/0x50 [ 8.193254] Initializing USB Mass Storage driver... [ 8.193395] usb-storage 1-1.1.1:1.0: usb_probe_interface [ 8.193399] usb-storage 1-1.1.1:1.0: usb_probe_interface - got id [ 8.193470] scsi6 : SCSI emulation for USB Mass Storage devices [ 8.193784] usb-storage: device found at 6 [ 8.193786] usb-storage: waiting for device to settle before scanning [ 8.193769] usbcore: registered new interface driver usb-storage [ 8.193889] USB Mass Storage support registered. [ 8.194007] initcall usb_stor_init+0x0/0x50 returned 0 after 0 msecs [ 8.194130] calling usb_usual_init+0x0/0x3e [ 8.194313] usbcore: registered new interface driver libusual [ 8.194432] initcall usb_usual_init+0x0/0x3e returned 0 after 0 msecs [ 8.194564] calling i8042_init+0x0/0x39f [ 8.194785] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 8.197604] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.197721] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.197840] initcall i8042_init+0x0/0x39f returned 0 after 3 msecs [ 8.197965] calling mousedev_init+0x0/0x8e [ 8.198175] mice: PS/2 mouse device common for all mice [ 8.198298] initcall mousedev_init+0x0/0x8e returned 0 after 0 msecs [ 8.198432] calling evdev_init+0x0/0x12 [ 8.206229] initcall evdev_init+0x0/0x12 returned 0 after 7 msecs [ 8.206353] calling atkbd_init+0x0/0x27 [ 8.206536] initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs [ 8.206672] calling psmouse_init+0x0/0x6d [ 8.227380] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 8.256472] initcall psmouse_init+0x0/0x6d returned 0 after 47 msecs [ 8.256606] calling i2c_dev_init+0x0/0x9e [ 8.256740] i2c /dev entries driver [ 8.257036] initcall i2c_dev_init+0x0/0x9e returned 0 after 0 msecs [ 8.257193] calling nforce2_init+0x0/0x1b [ 8.257635] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2d00 [ 8.257825] i2c-adapter i2c-2: nForce2 SMBus adapter at 0x2e00 [ 8.257990] initcall nforce2_init+0x0/0x1b returned 0 after 0 msecs [ 8.258120] calling sm_lm85_init+0x0/0x14 [ 8.275944] i2c-adapter i2c-2: lm85: Detected SMSC chip [ 8.276055] i2c-adapter i2c-2: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. [ 8.276255] hwmon-vid: Unknown VRM version of your x86 CPU [ 8.289934] i2c-adapter i2c-2: lm85: Detected SMSC chip [ 8.290045] i2c-adapter i2c-2: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. [ 8.290253] hwmon-vid: Unknown VRM version of your x86 CPU [ 8.297996] initcall sm_lm85_init+0x0/0x14 returned 0 after 37 msecs [ 8.298117] calling linear_init+0x0/0x12 [ 8.298223] md: linear personality registered for level -1 [ 8.298329] initcall linear_init+0x0/0x12 returned 0 after 0 msecs [ 8.298438] calling raid0_init+0x0/0x12 [ 8.298543] md: raid0 personality registered for level 0 [ 8.298649] initcall raid0_init+0x0/0x12 returned 0 after 0 msecs [ 8.298758] calling raid_init+0x0/0x12 [ 8.298872] md: raid1 personality registered for level 1 [ 8.298984] initcall raid_init+0x0/0x12 returned 0 after 0 msecs [ 8.299095] calling raid5_init+0x0/0x3e [ 8.315952] raid6: int64x1 2203 MB/s [ 8.332953] raid6: int64x2 2714 MB/s [ 8.349939] raid6: int64x4 2375 MB/s [ 8.366986] raid6: int64x8 1500 MB/s [ 8.383940] raid6: sse2x1 2984 MB/s [ 8.400935] raid6: sse2x2 4875 MB/s [ 8.417939] raid6: sse2x4 5886 MB/s [ 8.418044] raid6: using algorithm sse2x4 (5886 MB/s) [ 8.418151] md: raid6 personality registered for level 6 [ 8.418250] md: raid5 personality registered for level 5 [ 8.418359] md: raid4 personality registered for level 4 [ 8.418465] initcall raid5_init+0x0/0x3e returned 0 after 113 msecs [ 8.418587] calling dm_init+0x0/0x49 [ 8.418838] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 8.419033] initcall dm_init+0x0/0x49 returned 0 after 0 msecs [ 8.419155] calling dm_crypt_init+0x0/0x69 [ 8.419267] initcall dm_crypt_init+0x0/0x69 returned 0 after 0 msecs [ 8.419380] calling dm_snapshot_init+0x0/0x1f1 [ 8.419584] initcall dm_snapshot_init+0x0/0x1f1 returned 0 after 0 msecs [ 8.419708] calling dm_mirror_init+0x0/0x2f [ 8.419824] initcall dm_mirror_init+0x0/0x2f returned 0 after 0 msecs [ 8.419941] calling dm_dirty_log_init+0x0/0x59 [ 8.420048] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 msecs [ 8.420178] calling dm_zero_init+0x0/0x31 [ 8.420291] initcall dm_zero_init+0x0/0x31 returned 0 after 0 msecs [ 8.420400] calling edac_init+0x0/0x9d [ 8.420504] EDAC MC: Ver: 2.1.0 Jul 17 2008 [ 8.420789] initcall edac_init+0x0/0x9d returned 0 after 0 msecs [ 8.420911] calling cpufreq_stats_init+0x0/0x8f [ 8.421035] initcall cpufreq_stats_init+0x0/0x8f returned 0 after 0 msecs [ 8.421166] calling cpufreq_gov_powersave_init+0x0/0x12 [ 8.421284] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 msecs [ 8.421474] calling cpufreq_gov_userspace_init+0x0/0x12 [ 8.421590] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs [ 8.421781] calling cpufreq_gov_dbs_init+0x0/0x46 [ 8.422123] initcall cpufreq_gov_dbs_init+0x0/0x46 returned 0 after 0 msecs [ 8.422233] calling cpufreq_gov_dbs_init+0x0/0x12 [ 8.422350] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs [ 8.422473] calling hid_init+0x0/0xb [ 8.422622] initcall hid_init+0x0/0xb returned 0 after 0 msecs [ 8.422752] calling hid_init+0x0/0x62 [ 8.422922] usbcore: registered new interface driver hiddev [ 8.423047] usbhid 1-1.1.2:1.0: usb_probe_interface [ 8.423049] usbhid 1-1.1.2:1.0: usb_probe_interface - got id [ 8.425979] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input3 [ 8.436269] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1.1.2 [ 8.436652] usbcore: registered new interface driver usbhid [ 8.436763] usbhid: v2.6:USB HID core driver [ 8.436884] initcall hid_init+0x0/0x62 returned 0 after 13 msecs [ 8.437026] calling init_soundcore+0x0/0x59 [ 8.437187] initcall init_soundcore+0x0/0x59 returned 0 after 0 msecs [ 8.437330] calling alsa_sound_init+0x0/0x87 [ 8.437471] Advanced Linux Sound Architecture Driver Version 1.0.17. [ 8.437585] initcall alsa_sound_init+0x0/0x87 returned 0 after 0 msecs [ 8.437729] calling alsa_hwdep_init+0x0/0x64 [ 8.437857] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 0 msecs [ 8.437990] calling alsa_timer_init+0x0/0x162 [ 8.438156] initcall alsa_timer_init+0x0/0x162 returned 0 after 0 msecs [ 8.438318] calling rtctimer_init+0x0/0x115 [ 8.444432] initcall rtctimer_init+0x0/0x115 returned 0 after 0 msecs [ 8.444558] calling alsa_pcm_init+0x0/0x6c [ 8.444708] initcall alsa_pcm_init+0x0/0x6c returned 0 after 0 msecs [ 8.444832] calling snd_mem_init+0x0/0x2c [ 8.444985] initcall snd_mem_init+0x0/0x2c returned 0 after 0 msecs [ 8.445109] calling alsa_rawmidi_init+0x0/0x80 [ 8.445267] initcall alsa_rawmidi_init+0x0/0x80 returned 0 after 0 msecs [ 8.445402] calling alsa_mixer_oss_init+0x0/0x3a [ 8.445540] initcall alsa_mixer_oss_init+0x0/0x3a returned 0 after 0 msecs [ 8.445693] calling alsa_pcm_oss_init+0x0/0x7d [ 8.445839] initcall alsa_pcm_oss_init+0x0/0x7d returned 0 after 0 msecs [ 8.446001] calling alsa_seq_oss_init+0x0/0x16c [ 8.446313] initcall alsa_seq_oss_init+0x0/0x16c returned 0 after 0 msecs [ 8.446454] calling alsa_seq_init+0x0/0x57 [ 8.446653] initcall alsa_seq_init+0x0/0x57 returned 0 after 0 msecs [ 8.446797] calling alsa_seq_device_init+0x0/0x5b [ 8.446942] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 0 msecs [ 8.447088] calling alsa_seq_midi_event_init+0x0/0x8 [ 8.447236] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 msecs [ 8.447487] calling alsa_seq_midi_init+0x0/0x3a [ 8.447635] initcall alsa_seq_midi_init+0x0/0x3a returned 0 after 0 msecs [ 8.447795] calling alsa_seq_midi_emul_init+0x0/0x8 [ 8.447933] initcall alsa_seq_midi_emul_init+0x0/0x8 returned 0 after 0 msecs [ 8.448086] calling alsa_opl3_init+0x0/0x8 [ 8.448234] initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 msecs [ 8.448386] calling alsa_opl3_seq_init+0x0/0x1e [ 8.448515] initcall alsa_opl3_seq_init+0x0/0x1e returned 0 after 0 msecs [ 8.448677] calling alsa_mpu401_uart_init+0x0/0x8 [ 8.448806] initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 msecs [ 8.448959] calling alsa_card_cmipci_init+0x0/0x1b [ 8.449708] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 8.449836] C-Media PCI 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 8.451366] initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 2 msecs [ 8.451515] calling snd_usb_audio_init+0x0/0x3d [ 8.451668] snd-usb-audio 1-1.2:1.2: usb_probe_interface [ 8.451671] snd-usb-audio 1-1.2:1.2: usb_probe_interface - got id [ 8.476426] usbcore: registered new interface driver snd-usb-audio [ 8.476554] initcall snd_usb_audio_init+0x0/0x3d returned 0 after 23 msecs [ 8.476699] calling alsa_sound_last_init+0x0/0x61 [ 8.476826] ALSA device list: [ 8.476947] #0: C-Media CMI8768 at 0xc800, irq 17 [ 8.477068] #1: USB Device 0x46d:0x8ce at usb-0000:00:02.1-1.2, high speed [ 8.477203] initcall alsa_sound_last_init+0x0/0x61 returned 0 after 0 msecs [ 8.477331] calling sysctl_core_init+0x0/0x12 [ 8.477510] initcall sysctl_core_init+0x0/0x12 returned 0 after 0 msecs [ 8.477634] calling flow_cache_init+0x0/0x1bb [ 8.477810] initcall flow_cache_init+0x0/0x1bb returned 0 after 0 msecs [ 8.477946] calling blackhole_module_init+0x0/0x12 [ 8.478077] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 msecs [ 8.478217] calling sysctl_ipv4_init+0x0/0x4e [ 8.478679] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs [ 8.478809] calling init_syncookies+0x0/0x19 [ 8.478959] initcall init_syncookies+0x0/0x19 returned 0 after 0 msecs [ 8.479104] calling ipv4_netfilter_init+0x0/0x12 [ 8.479234] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 msecs [ 8.479357] calling inet_diag_init+0x0/0x69 [ 8.479499] initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs [ 8.479621] calling tcp_diag_init+0x0/0x12 [ 8.479753] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs [ 8.479885] calling bictcp_register+0x0/0x12 [ 8.480013] TCP bic registered [ 8.480129] initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs [ 8.480276] calling cubictcp_register+0x0/0x6e [ 8.480397] TCP cubic registered [ 8.480527] initcall cubictcp_register+0x0/0x6e returned 0 after 0 msecs [ 8.480662] calling tcp_westwood_register+0x0/0x12 [ 8.480790] TCP westwood registered [ 8.480915] initcall tcp_westwood_register+0x0/0x12 returned 0 after 0 msecs [ 8.481046] calling hstcp_register+0x0/0x12 [ 8.481173] TCP highspeed registered [ 8.481291] initcall hstcp_register+0x0/0x12 returned 0 after 0 msecs [ 8.481452] calling hybla_register+0x0/0x12 [ 8.481598] TCP hybla registered [ 8.481724] initcall hybla_register+0x0/0x12 returned 0 after 0 msecs [ 8.481880] calling htcp_register+0x0/0x12 [ 8.482016] TCP htcp registered [ 8.482154] initcall htcp_register+0x0/0x12 returned 0 after 0 msecs [ 8.482317] calling tcp_vegas_register+0x0/0x14 [ 8.482452] TCP vegas registered [ 8.482579] initcall tcp_vegas_register+0x0/0x14 returned 0 after 0 msecs [ 8.482746] calling tcp_veno_register+0x0/0x14 [ 8.482883] TCP veno registered [ 8.483015] initcall tcp_veno_register+0x0/0x14 returned 0 after 0 msecs [ 8.483179] calling tcp_scalable_register+0x0/0x12 [ 8.483327] TCP scalable registered [ 8.483453] initcall tcp_scalable_register+0x0/0x12 returned 0 after 0 msecs [ 8.483615] calling tcp_lp_register+0x0/0x12 [ 8.483751] TCP lp registered [ 8.483876] initcall tcp_lp_register+0x0/0x12 returned 0 after 0 msecs [ 8.484027] calling tcp_yeah_register+0x0/0x14 [ 8.484184] TCP yeah registered [ 8.484310] initcall tcp_yeah_register+0x0/0x14 returned 0 after 0 msecs [ 8.484483] calling tcp_illinois_register+0x0/0x12 [ 8.484620] TCP illinois registered [ 8.484752] initcall tcp_illinois_register+0x0/0x12 returned 0 after 0 msecs [ 8.484906] calling inet6_init+0x0/0x320 [ 8.485154] NET: Registered protocol family 10 [ 8.485884] lo: Disabled Privacy Extensions [ 8.487537] initcall inet6_init+0x0/0x320 returned 0 after 2 msecs [ 8.487710] calling packet_init+0x0/0x47 [ 8.487843] NET: Registered protocol family 17 [ 8.487983] initcall packet_init+0x0/0x47 returned 0 after 0 msecs [ 8.488136] calling powernowk8_init+0x0/0x92 [ 8.488348] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2354 processors (8 cpu cores) (version 2.20.00) [ 8.488828] powernow-k8: 0 : pstate 0 (2200 MHz) [ 8.488953] powernow-k8: 1 : pstate 1 (2000 MHz) [ 8.489052] powernow-k8: 2 : pstate 2 (1700 MHz) [ 8.489182] powernow-k8: 3 : pstate 3 (1400 MHz) [ 8.489300] powernow-k8: 4 : pstate 4 (1100 MHz) [ 8.490647] powernow-k8: 0 : pstate 0 (2200 MHz) [ 8.490781] powernow-k8: 1 : pstate 1 (2000 MHz) [ 8.490919] powernow-k8: 2 : pstate 2 (1700 MHz) [ 8.491005] powernow-k8: 3 : pstate 3 (1400 MHz) [ 8.491005] powernow-k8: 4 : pstate 4 (1100 MHz) [ 8.491297] initcall powernowk8_init+0x0/0x92 returned 0 after 2 msecs [ 8.491461] calling hpet_insert_resource+0x0/0x23 [ 8.491584] initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs [ 8.491755] calling update_mp_table+0x0/0x492 [ 8.491892] initcall update_mp_table+0x0/0x492 returned 0 after 0 msecs [ 8.492047] calling lapic_insert_resource+0x0/0x40 [ 8.492186] initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs [ 8.492320] calling init_lapic_nmi_sysfs+0x0/0x38 [ 8.492458] initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs [ 8.492610] calling ioapic_insert_resources+0x0/0x4f [ 8.492758] initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs [ 8.493030] calling check_early_ioremap_leak+0x0/0x42 [ 8.493162] initcall check_early_ioremap_leak+0x0/0x42 returned 0 after 0 msecs [ 8.493426] calling init_oops_id+0x0/0x23 [ 8.493547] initcall init_oops_id+0x0/0x23 returned 0 after 0 msecs [ 8.493717] calling disable_boot_consoles+0x0/0x3a [ 8.493855] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs [ 8.494017] calling pm_qos_power_init+0x0/0x61 [ 8.494294] initcall pm_qos_power_init+0x0/0x61 returned 0 after 0 msecs [ 8.494454] calling debugfs_kprobe_init+0x0/0x89 [ 8.494588] initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs [ 8.494749] calling random32_reseed+0x0/0x6c [ 8.494885] initcall random32_reseed+0x0/0x6c returned 0 after 0 msecs [ 8.495032] calling pci_sysfs_init+0x0/0x4c [ 8.495398] initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs [ 8.495542] calling acpi_wakeup_device_init+0x0/0xb1 [ 8.495683] initcall acpi_wakeup_device_init+0x0/0xb1 returned 0 after 0 msecs [ 8.501951] calling seqgen_init+0x0/0xf [ 8.502086] initcall seqgen_init+0x0/0xf returned 0 after 0 msecs [ 8.502232] calling saa7134_alsa_init+0x0/0x6e [ 8.502357] saa7134 ALSA driver for DMA sound loaded [ 8.502521] saa7134[0]/alsa: saa7134[0] at 0xfeaffc00 irq 19 registered as card -1 [ 8.503170] initcall saa7134_alsa_init+0x0/0x6e returned 0 after 0 msecs [ 8.503316] calling scsi_complete_async_scans+0x0/0x10c [ 8.503435] initcall scsi_complete_async_scans+0x0/0x10c returned 0 after 0 msecs [ 8.503658] calling memmap_init+0x0/0x98 [ 8.503811] initcall memmap_init+0x0/0x98 returned 0 after 0 msecs [ 8.503954] calling pci_mmcfg_late_insert_resources+0x0/0x43 [ 8.504094] initcall pci_mmcfg_late_insert_resources+0x0/0x43 returned 0 after 0 msecs [ 8.504341] calling tcp_congestion_default+0x0/0x12 [ 8.504454] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs [ 8.504800] md: Autodetecting RAID arrays. [ 8.504919] md: Scanned 0 and added 0 devices. [ 8.505042] md: autorun ... [ 8.505164] md: ... autorun DONE. [ 8.529514] kjournald starting. Commit interval 5 seconds [ 8.529432] EXT3-fs: mounted filesystem with ordered data mode. [ 8.529442] VFS: Mounted root (ext3 filesystem) readonly. [ 8.529464] Freeing unused kernel memory: 320k freed [ 8.529623] Write protecting the kernel read-only data: 5328k