[ 0.000000] Linux version 2.6.26 (simon@redrum) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #03414-g33af79d-dirty SMP PREEMPT 2008-07-19T05:24:39+0100 [ 0.000000] Command line: root=/dev/sdb1 ro init=/startup vga=0xf07 sysrq_always_enabled usbhid.mousepoll=1 tuner.debug=1 initcall_debug=1 notsc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000480000000 (usable) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] last_pfn = 0x480000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffd0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffd0000 @ 8000-b000 [ 0.000000] last_map_addr: 7ffd0000 end: 7ffd0000 [ 0.000000] init_memory_mapping [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0100000000 - 0480000000 page 1G [ 0.000000] kernel direct mapping tables up to 480000000 @ a000-b000 [ 0.000000] last_map_addr: 480000000 end: 480000000 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F9680, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7FFD0100, 005C (r1 040208 XSDT1120 20080402 MSFT 97) [ 0.000000] ACPI: FACP 7FFD0290, 00F4 (r3 040208 FACP1120 20080402 MSFT 97) [ 0.000000] ACPI: DSDT 7FFD0470, 4D61 (r1 0AAAA 0AAAA000 0 INTL 20051117) [ 0.000000] ACPI: FACS 7FFDE000, 0040 [ 0.000000] ACPI: APIC 7FFD0390, 00A0 (r1 040208 APIC1120 20080402 MSFT 97) [ 0.000000] ACPI: MCFG 7FFD0430, 003C (r1 040208 OEMMCFG 20080402 MSFT 97) [ 0.000000] ACPI: OEMB 7FFDE040, 0091 (r1 040208 OEMB1120 20080402 MSFT 97) [ 0.000000] ACPI: SRAT 7FFD51E0, 0150 (r1 AMD HAMMER 1 AMD 1) [ 0.000000] ACPI: HPET 7FFD5330, 0038 (r1 040208 OEMHPET0 20080402 MSFT 97) [ 0.000000] ACPI: SSDT 7FFD5370, 143C (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 4 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 5 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 6 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 7 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] Entering add_active_range(0, 0x100, 0x7ffd0) 1 entries of 256 used [ 0.000000] SRAT: Node 0 PXM 0 100000000-280000000 [ 0.000000] Entering add_active_range(0, 0x100000, 0x280000) 2 entries of 256 used [ 0.000000] SRAT: Node 1 PXM 1 280000000-480000000 [ 0.000000] Entering add_active_range(1, 0x280000, 0x480000) 3 entries of 256 used [ 0.000000] NUMA: Allocated memnodemap from a000 - 13040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000280000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000002fff] [ 0.000000] bootmap [0000000000014000 - 0000000000063fff] pages 50 [ 0.000000] (6 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000983d08] TEXT DATA BSS ==> [0000200000 - 0000983d08] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #5 [000000a000 - 0000013040] MEMNODEMAP ==> [000000a000 - 0000013040] [ 0.000000] Bootmem setup node 1 0000000280000000-0000000480000000 [ 0.000000] NODE_DATA [0000000280000000 - 0000000280001fff] [ 0.000000] bootmap [0000000280002000 - 0000000280041fff] pages 40 [ 0.000000] (6 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 0000983d08] TEXT DATA BSS [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE [ 0.000000] #5 [000000a000 - 0000013040] MEMNODEMAP [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe20008bfffff] PMD -> [ffff880028200000-ffff88002f1fffff] on node 0 [ 0.000000] [ffffe20008c00000-ffffe2000fbfffff] PMD -> [ffff880280200000-ffff8802871fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00480000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffd0 [ 0.000000] 0: 0x00100000 -> 0x00280000 [ 0.000000] 1: 0x00280000 -> 0x00480000 [ 0.000000] On node 0 totalpages: 2097007 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2035 pages reserved [ 0.000000] DMA zone: 1908 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505864 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1551360 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 0 pages used for memmap [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 42752 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 2 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4127612 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sdb1 ro init=/startup vga=0xf07 sysrq_always_enabled usbhid.mousepoll=1 tuner.debug=1 initcall_debug=1 notsc [ 0.000000] debug: sysrq always enabled. [ 0.000000] notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 2200.090 MHz processor. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x60 [ 0.000000] console [tty0] enabled [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 80000000 size 1024 MB [ 0.000000] Node 1: aperture @ 80000000 size 1024 MB [ 0.000000] Memory: 16538500k/18874368k available (3947k kernel code, 238136k reserved, 1876k data, 320k init) [ 0.000000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.000000] hpet clockevent registered [ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4400.17 BogoMIPS (lpj=2200087) [ 0.001999] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.009998] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013997] Mount-cache hash table entries: 256 [ 0.013997] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.013997] CPU: L2 Cache: 512K (64 bytes/line) [ 0.013997] CPU 0/0 -> Node 0 [ 0.014997] tseg: 0000000000 [ 0.014997] CPU: Physical Processor ID: 0 [ 0.014997] CPU: Processor Core ID: 0 [ 0.014997] using C1E aware idle routine [ 0.014997] ACPI: Core revision 20080609 [ 0.044991] CPU0: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.045991] Using local APIC timer interrupts. [ 0.046991] APIC timer calibration result 12500532 [ 0.046991] Detected 12.500 MHz APIC timer. [ 0.046991] Booting processor 1/1 ip 6000 [ 0.067000] Initializing CPU#1 [ 0.069000] Calibrating delay loop... <6>2170.88 BogoMIPS (lpj=1085440) [ 0.094000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.094000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.094000] CPU 1/1 -> Node 0 [ 0.094000] CPU: Physical Processor ID: 0 [ 0.094000] CPU: Processor Core ID: 1 [ 0.094000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.093982] CPU1: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.094982] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.095982] Booting processor 2/2 ip 6000 [ 0.117000] Initializing CPU#2 [ 0.119000] Calibrating delay loop... <6>2179.07 BogoMIPS (lpj=1089536) [ 0.143000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.143000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.143000] CPU 2/2 -> Node 0 [ 0.143000] CPU: Physical Processor ID: 0 [ 0.143000] CPU: Processor Core ID: 2 [ 0.143000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.142973] CPU2: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.143973] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.145973] Booting processor 3/3 ip 6000 [ 0.166000] Initializing CPU#3 [ 0.168000] Calibrating delay loop... <6>2179.07 BogoMIPS (lpj=1089536) [ 0.192000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.192000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.192000] CPU 3/3 -> Node 0 [ 0.192000] CPU: Physical Processor ID: 0 [ 0.192000] CPU: Processor Core ID: 3 [ 0.192000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.191964] CPU3: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.192964] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.193964] Booting processor 4/4 ip 6000 [ 0.215000] Initializing CPU#4 [ 0.217000] Calibrating delay loop... <6>2195.45 BogoMIPS (lpj=1097728) [ 0.241000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.241000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.241000] CPU 4/4 -> Node 1 [ 0.241000] CPU: Physical Processor ID: 1 [ 0.241000] CPU: Processor Core ID: 0 [ 0.241000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.240955] CPU4: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.241955] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.242955] Booting processor 5/5 ip 6000 [ 0.263000] Initializing CPU#5 [ 0.265000] Calibrating delay loop... <6>2195.45 BogoMIPS (lpj=1097728) [ 0.289000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.289000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.289000] CPU 5/5 -> Node 1 [ 0.289000] CPU: Physical Processor ID: 1 [ 0.289000] CPU: Processor Core ID: 1 [ 0.289000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.288947] CPU5: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.289946] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.290946] Booting processor 6/6 ip 6000 [ 0.311000] Initializing CPU#6 [ 0.313000] Calibrating delay loop... <6>2195.45 BogoMIPS (lpj=1097728) [ 0.337000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.337000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.337000] CPU 6/6 -> Node 1 [ 0.337000] CPU: Physical Processor ID: 1 [ 0.337000] CPU: Processor Core ID: 2 [ 0.337000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.336938] CPU6: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.337937] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.338937] Booting processor 7/7 ip 6000 [ 0.359000] Initializing CPU#7 [ 0.361000] Calibrating delay loop... <6>2195.45 BogoMIPS (lpj=1097728) [ 0.385000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.385000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.385000] CPU 7/7 -> Node 1 [ 0.385000] CPU: Physical Processor ID: 1 [ 0.385000] CPU: Processor Core ID: 3 [ 0.385000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.384929] CPU7: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.385929] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.386928] Brought up 8 CPUs [ 0.386928] Total of 8 processors activated (19711.02 BogoMIPS). [ 0.386928] calling init_cpufreq_transition_notifier_list+0x0/0x1b [ 0.386928] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs [ 0.387928] calling net_ns_init+0x0/0x182 [ 0.387928] net_namespace: 1224 bytes [ 0.387928] initcall net_ns_init+0x0/0x182 returned 0 after 0 msecs [ 0.387928] calling cpufreq_tsc+0x0/0x16 [ 0.387928] initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs [ 0.387928] calling init_smp_flush+0x0/0x4a [ 0.387928] initcall init_smp_flush+0x0/0x4a returned 0 after 0 msecs [ 0.387928] calling sysctl_init+0x0/0x32 [ 0.388928] initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs [ 0.388928] calling ksysfs_init+0x0/0xbb [ 0.388928] initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs [ 0.388928] calling init_jiffies_clocksource+0x0/0x12 [ 0.388928] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs [ 0.388928] calling pm_init+0x0/0x34 [ 0.388928] initcall pm_init+0x0/0x34 returned 0 after 0 msecs [ 0.389928] calling filelock_init+0x0/0x2e [ 0.389928] initcall filelock_init+0x0/0x2e returned 0 after 0 msecs [ 0.389928] calling init_script_binfmt+0x0/0x12 [ 0.389928] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.389928] calling init_elf_binfmt+0x0/0x12 [ 0.389928] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.389928] calling init_compat_elf_binfmt+0x0/0x12 [ 0.389928] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.390928] calling debugfs_init+0x0/0x51 [ 0.390928] initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs [ 0.390928] calling calibrate_xor_blocks+0x0/0xa7 [ 0.390928] xor: automatically using best checksumming function: generic_sse [ 0.395927] generic_sse: 8532.000 MB/sec [ 0.395927] xor: using function: generic_sse (8532.000 MB/sec) [ 0.395927] initcall calibrate_xor_blocks+0x0/0xa7 returned 0 after 4 msecs [ 0.395927] calling random32_init+0x0/0x5b [ 0.395927] initcall random32_init+0x0/0x5b returned 0 after 0 msecs [ 0.395927] calling cpufreq_core_init+0x0/0x7f [ 0.395927] initcall cpufreq_core_init+0x0/0x7f returned 0 after 0 msecs [ 0.395927] calling sock_init+0x0/0x5e [ 0.395927] initcall sock_init+0x0/0x5e returned 0 after 0 msecs [ 0.396927] calling netlink_proto_init+0x0/0x14e [ 0.396927] NET: Registered protocol family 16 [ 0.396927] initcall netlink_proto_init+0x0/0x14e returned 0 after 0 msecs [ 0.396927] calling bdi_class_init+0x0/0x3d [ 0.396927] initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs [ 0.396927] calling kobject_uevent_init+0x0/0x45 [ 0.396927] initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs [ 0.396927] calling pcibus_class_init+0x0/0x12 [ 0.397926] initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs [ 0.397926] calling pci_driver_init+0x0/0x12 [ 0.397926] initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs [ 0.397926] calling backlight_class_init+0x0/0x49 [ 0.397926] initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs [ 0.397926] calling video_output_class_init+0x0/0x12 [ 0.397926] initcall video_output_class_init+0x0/0x12 returned 0 after 0 msecs [ 0.398926] calling dock_init+0x0/0x5a [ 0.398926] No dock devices found. [ 0.398926] initcall dock_init+0x0/0x5a returned 0 after 0 msecs [ 0.398926] calling tty_class_init+0x0/0x2a [ 0.398926] initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs [ 0.398926] calling vtconsole_class_init+0x0/0xba [ 0.399926] initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs [ 0.399926] calling register_node_type+0x0/0x6b [ 0.399926] initcall register_node_type+0x0/0x6b returned 0 after 0 msecs [ 0.399926] calling enable_pci_io_ecs+0x0/0x2e [ 0.399926] initcall enable_pci_io_ecs+0x0/0x2e returned 0 after 0 msecs [ 0.399926] calling early_fill_mp_bus_info+0x0/0x7e5 [ 0.399926] node 0 link 0: io port [1000, ffffff] [ 0.399926] TOM: 0000000080000000 aka 2048M [ 0.399926] Fam 10h mmconf [e0000000, e00fffff] [ 0.399926] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff] [ 0.399926] node 0 link 0: mmio [f0000000, fec0ffff] [ 0.399926] node 0 link 0: mmio [a0000, bffff] [ 0.399926] node 0 link 0: mmio [80000000, dfffffff] [ 0.400926] TOM2: 0000000480000000 aka 18432M [ 0.400926] bus: [00,07] on node 0 link 0 [ 0.400926] bus: 00 index 0 io port: [0, ffff] [ 0.400926] bus: 00 index 1 mmio: [e0100000, ffffffff] [ 0.400926] bus: 00 index 2 mmio: [a0000, bffff] [ 0.400926] bus: 00 index 3 mmio: [80000000, dfffffff] [ 0.400926] bus: 00 index 4 mmio: [480000000, fcffffffff] [ 0.400926] initcall early_fill_mp_bus_info+0x0/0x7e5 returned 0 after 0 msecs [ 0.400926] calling arch_kdebugfs_init+0x0/0x8 [ 0.400926] initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs [ 0.400926] calling mtrr_if_init+0x0/0x77 [ 0.400926] initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs [ 0.400926] calling ffh_cstate_init+0x0/0x31 [ 0.400926] initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs [ 0.401926] initcall ffh_cstate_init+0x0/0x31 returned with error code -1 [ 0.401926] calling acpi_pci_init+0x0/0x40 [ 0.401926] ACPI: bus type pci registered [ 0.401926] initcall acpi_pci_init+0x0/0x40 returned 0 after 0 msecs [ 0.401926] calling init_acpi_device_notify+0x0/0x4b [ 0.401926] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs [ 0.401926] calling dmi_id_init+0x0/0x2e9 [ 0.402926] initcall dmi_id_init+0x0/0x2e9 returned 0 after 0 msecs [ 0.402926] calling pci_arch_init+0x0/0x4e [ 0.402926] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.402926] PCI: MCFG area at e0000000 reserved in E820 [ 0.407925] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.407925] PCI: Using configuration type 1 for base access [ 0.407925] initcall pci_arch_init+0x0/0x4e returned 0 after 4 msecs [ 0.407925] calling topology_init+0x0/0x7c [ 0.408924] initcall topology_init+0x0/0x7c returned 0 after 0 msecs [ 0.408924] calling mtrr_init_finialize+0x0/0x3d [ 0.408924] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 msecs [ 0.408924] calling param_sysfs_init+0x0/0x1e7 [ 0.412924] initcall param_sysfs_init+0x0/0x1e7 returned 0 after 3 msecs [ 0.412924] calling pm_sysrq_init+0x0/0x19 [ 0.412924] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs [ 0.413924] calling readahead_init+0x0/0x38 [ 0.413924] initcall readahead_init+0x0/0x38 returned 0 after 0 msecs [ 0.413924] calling init_bio+0x0/0xc5 [ 0.414923] initcall init_bio+0x0/0xc5 returned 0 after 0 msecs [ 0.414923] calling blk_settings_init+0x0/0x2a [ 0.414923] initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs [ 0.414923] calling blk_ioc_init+0x0/0x2a [ 0.414923] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs [ 0.414923] calling genhd_device_init+0x0/0x55 [ 0.415923] initcall genhd_device_init+0x0/0x55 returned 0 after 0 msecs [ 0.415923] calling pci_slot_init+0x0/0x45 [ 0.415923] initcall pci_slot_init+0x0/0x45 returned 0 after 0 msecs [ 0.415923] calling fbmem_init+0x0/0x8a [ 0.415923] initcall fbmem_init+0x0/0x8a returned 0 after 0 msecs [ 0.415923] calling acpi_init+0x0/0x221 [ 0.416923] ACPI: EC: Look up EC in DSDT [ 0.433920] ACPI: Interpreter enabled [ 0.433920] ACPI: (supports S0 S5) [ 0.433920] ACPI: Using IOAPIC for interrupt routing [ 0.433920] initcall acpi_init+0x0/0x221 returned 0 after 17 msecs [ 0.433920] calling acpi_scan_init+0x0/0x11e [ 0.446917] initcall acpi_scan_init+0x0/0x11e returned 0 after 12 msecs [ 0.446917] calling acpi_ec_init+0x0/0x61 [ 0.446917] initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs [ 0.447917] calling acpi_pci_root_init+0x0/0x28 [ 0.447917] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.447917] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.447917] pci 0000:00:01.1: PME# disabled [ 0.447917] pci 0000:00:02.0: supports D1 [ 0.447917] pci 0000:00:02.0: supports D2 [ 0.447917] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448917] pci 0000:00:02.0: PME# disabled [ 0.448917] pci 0000:00:02.1: supports D1 [ 0.448917] pci 0000:00:02.1: supports D2 [ 0.448917] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448917] pci 0000:00:02.1: PME# disabled [ 0.448917] pci 0000:00:08.0: supports D1 [ 0.448917] pci 0000:00:08.0: supports D2 [ 0.448917] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.448917] pci 0000:00:08.0: PME# disabled [ 0.448917] pci 0000:00:09.0: supports D1 [ 0.448917] pci 0000:00:09.0: supports D2 [ 0.448917] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449917] pci 0000:00:09.0: PME# disabled [ 0.449917] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449917] pci 0000:00:0a.0: PME# disabled [ 0.449917] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449917] pci 0000:00:0d.0: PME# disabled [ 0.449917] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449917] pci 0000:00:0e.0: PME# disabled [ 0.449917] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.450917] pci 0000:00:0f.0: PME# disabled [ 0.450917] pci 0000:01:06.0: supports D1 [ 0.450917] pci 0000:01:06.0: supports D2 [ 0.450917] pci 0000:01:07.0: supports D1 [ 0.450917] pci 0000:01:07.0: supports D2 [ 0.450917] pci 0000:00:06.0: transparent bridge [ 0.450917] pci 0000:03:00.0: supports D1 [ 0.450917] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.450917] pci 0000:03:00.0: PME# disabled [ 0.451917] pci 0000:03:00.1: supports D1 [ 0.451917] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.451917] pci 0000:03:00.1: PME# disabled [ 0.451917] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.451917] pci 0000:04:00.0: PME# disabled [ 0.451917] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.451917] pci 0000:04:00.1: PME# disabled [ 0.452916] pci 0000:05:00.0: supports D1 [ 0.452916] pci 0000:05:00.0: supports D2 [ 0.452916] pci 0000:07:00.0: supports D1 [ 0.452916] pci 0000:07:00.0: supports D2 [ 0.452916] pci 0000:07:00.1: supports D1 [ 0.452916] pci 0000:07:00.1: supports D2 [ 0.452916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.453916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.453916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.453916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.453916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.453916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] [ 0.469913] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 20 msecs [ 0.469913] calling acpi_pci_link_init+0x0/0x48 [ 0.469913] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 0.470913] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.470913] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 [ 0.471913] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.471913] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *7 [ 0.472913] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.472913] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 [ 0.473912] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 [ 0.473912] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.474912] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5 [ 0.474912] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.475912] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.475912] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.476912] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 0.476912] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.477912] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.477912] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 0.478912] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.478912] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 0.478912] initcall acpi_pci_link_init+0x0/0x48 returned 0 after 8 msecs [ 0.479911] calling acpi_power_init+0x0/0x77 [ 0.479911] initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs [ 0.479911] calling acpi_system_init+0x0/0x1b0 [ 0.479911] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F3, should be F0 [20080609] [ 0.479911] initcall acpi_system_init+0x0/0x1b0 returned 0 after 0 msecs [ 0.479911] calling pnp_init+0x0/0x20 [ 0.480911] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.480911] initcall pnp_init+0x0/0x20 returned 0 after 0 msecs [ 0.480911] calling pnpacpi_init+0x0/0x8c [ 0.480911] pnp: PnP ACPI init [ 0.480911] ACPI: bus type pnp registered [ 0.487910] pnp: PnP ACPI: found 15 devices [ 0.487910] ACPI: ACPI bus type pnp unregistered [ 0.487910] initcall pnpacpi_init+0x0/0x8c returned 0 after 6 msecs [ 0.487910] calling misc_init+0x0/0x98 [ 0.487910] initcall misc_init+0x0/0x98 returned 0 after 0 msecs [ 0.487910] calling init_dvbdev+0x0/0xb9 [ 0.487910] initcall init_dvbdev+0x0/0xb9 returned 0 after 0 msecs [ 0.488910] calling init_scsi+0x0/0x7c [ 0.488910] SCSI subsystem initialized [ 0.488910] initcall init_scsi+0x0/0x7c returned 0 after 0 msecs [ 0.488910] calling ata_init+0x0/0x31f [ 0.489910] libata version 3.00 loaded. [ 0.489910] initcall ata_init+0x0/0x31f returned 0 after 0 msecs [ 0.489910] calling usb_init+0x0/0x122 [ 0.489910] usbcore: registered new interface driver usbfs [ 0.489910] usbcore: registered new interface driver hub [ 0.489910] usbcore: registered new device driver usb [ 0.489910] initcall usb_init+0x0/0x122 returned 0 after 0 msecs [ 0.489910] calling serio_init+0x0/0x89 [ 0.490909] initcall serio_init+0x0/0x89 returned 0 after 0 msecs [ 0.490909] calling input_init+0x0/0x107 [ 0.490909] initcall input_init+0x0/0x107 returned 0 after 0 msecs [ 0.490909] calling i2c_init+0x0/0x5f [ 0.490909] initcall i2c_init+0x0/0x5f returned 0 after 0 msecs [ 0.490909] calling power_supply_class_init+0x0/0x34 [ 0.490909] initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs [ 0.491909] calling hwmon_init+0x0/0x3b [ 0.491909] initcall hwmon_init+0x0/0x3b returned 0 after 0 msecs [ 0.491909] calling thermal_init+0x0/0x39 [ 0.491909] initcall thermal_init+0x0/0x39 returned 0 after 0 msecs [ 0.491909] calling md_init+0x0/0xd0 [ 0.491909] initcall md_init+0x0/0xd0 returned 0 after 0 msecs [ 0.492909] calling pci_subsys_init+0x0/0x12c [ 0.492909] PCI: Using ACPI for IRQ routing [ 0.492909] initcall pci_subsys_init+0x0/0x12c returned 0 after 0 msecs [ 0.492909] calling proto_init+0x0/0x2e [ 0.492909] initcall proto_init+0x0/0x2e returned 0 after 0 msecs [ 0.492909] calling net_dev_init+0x0/0x150 [ 0.492909] initcall net_dev_init+0x0/0x150 returned 0 after 0 msecs [ 0.492909] calling neigh_init+0x0/0x71 [ 0.493909] initcall neigh_init+0x0/0x71 returned 0 after 0 msecs [ 0.493909] calling fib_rules_init+0x0/0xa6 [ 0.493909] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs [ 0.493909] calling pktsched_init+0x0/0xc4 [ 0.493909] initcall pktsched_init+0x0/0xc4 returned 0 after 0 msecs [ 0.493909] calling tc_filter_init+0x0/0x4c [ 0.493909] initcall tc_filter_init+0x0/0x4c returned 0 after 0 msecs [ 0.493909] calling tc_action_init+0x0/0x4c [ 0.493909] initcall tc_action_init+0x0/0x4c returned 0 after 0 msecs [ 0.494909] calling genl_init+0x0/0xd9 [ 0.498908] initcall genl_init+0x0/0xd9 returned 0 after 3 msecs [ 0.498908] calling sysctl_init+0x0/0x2d [ 0.498908] initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs [ 0.498908] calling pci_iommu_init+0x0/0x17 [ 0.498908] DMAR:parse DMAR table failure. [ 0.498908] PCI-DMA: Disabling AGP. [ 0.626907] PCI-DMA: aperture base @ 80000000 size 1048576 KB [ 0.626907] init_memory_mapping [ 0.626907] 0080000000 - 00c0000000 page 1G [ 0.626907] last_map_addr: c0000000 end: c0000000 [ 0.628907] PCI-DMA: using GART IOMMU. [ 0.628907] PCI-DMA: Reserving 1024MB of IOMMU area in the AGP aperture [ 0.660906] initcall pci_iommu_init+0x0/0x17 returned 0 after 154 msecs [ 0.661906] calling hpet_late_init+0x0/0x114 [ 0.661906] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.661906] hpet0: 3 32-bit timers, 25000000 Hz [ 0.662906] initcall hpet_late_init+0x0/0x114 returned 0 after 0 msecs [ 0.662906] calling clocksource_done_booting+0x0/0x12 [ 0.662906] initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs [ 0.662906] calling init_pipe_fs+0x0/0x4c [ 0.663906] Switched to high resolution mode on CPU 0 [ 0.663980] Switched to high resolution mode on CPU 7 [ 0.663971] Switched to high resolution mode on CPU 6 [ 0.663963] Switched to high resolution mode on CPU 5 [ 0.663953] Switched to high resolution mode on CPU 4 [ 0.663906] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs [ 0.663906] calling init_mnt_writers+0x0/0x50 [ 0.663906] initcall init_mnt_writers+0x0/0x50 returned 0 after 0 msecs [ 0.663906] calling eventpoll_init+0x0/0x85 [ 0.663906] initcall eventpoll_init+0x0/0x85 returned 0 after 0 msecs [ 0.663906] calling anon_inode_init+0x0/0x115 [ 0.664222] Switched to high resolution mode on CPU 1 [ 0.664223] Switched to high resolution mode on CPU 3 [ 0.663906] initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs [ 0.664338] Switched to high resolution mode on CPU 2 [ 0.663906] calling pcie_aspm_init+0x0/0x22 [ 0.667907] initcall pcie_aspm_init+0x0/0x22 returned 0 after 3 msecs [ 0.667907] calling acpi_event_init+0x0/0x52 [ 0.671918] initcall acpi_event_init+0x0/0x52 returned 0 after 3 msecs [ 0.671918] calling pnp_system_init+0x0/0x12 [ 0.671918] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.671918] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.671918] system 00:07: ioport range 0x2000-0x207f has been reserved [ 0.671918] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 0.671918] system 00:07: ioport range 0x2400-0x247f has been reserved [ 0.671918] system 00:07: ioport range 0x2480-0x24ff has been reserved [ 0.671918] system 00:07: ioport range 0x2800-0x287f has been reserved [ 0.672921] system 00:07: ioport range 0x2880-0x28ff has been reserved [ 0.672921] system 00:07: ioport range 0x2c00-0x2c7f has been reserved [ 0.672921] system 00:07: ioport range 0x2c80-0x2cff has been reserved [ 0.672921] system 00:07: iomem range 0xfdf80000-0xfdfbffff has been reserved [ 0.672921] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved [ 0.672921] system 00:09: ioport range 0xca0-0xcaf has been reserved [ 0.672921] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.673958] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.673958] system 00:0c: ioport range 0xa00-0xa7f has been reserved [ 0.673958] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.673958] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.673958] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.673958] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.673958] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 0.674914] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.674914] initcall pnp_system_init+0x0/0x12 returned 0 after 2 msecs [ 0.674914] calling chr_dev_init+0x0/0x98 [ 0.675964] initcall chr_dev_init+0x0/0x98 returned 0 after 0 msecs [ 0.675964] calling firmware_class_init+0x0/0x72 [ 0.675964] initcall firmware_class_init+0x0/0x72 returned 0 after 0 msecs [ 0.675964] calling loopback_init+0x0/0x12 [ 0.675964] initcall loopback_init+0x0/0x12 returned 0 after 0 msecs [ 0.675964] calling cpufreq_gov_performance_init+0x0/0x12 [ 0.675964] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs [ 0.676582] calling init_acpi_pm_clocksource+0x0/0xae [ 0.676582] initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs [ 0.678582] calling pcibios_assign_resources+0x0/0x87 [ 0.678582] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.678582] pci 0000:00:06.0: IO window: 0xc000-0xcfff [ 0.678582] pci 0000:00:06.0: MEM window: 0xfe800000-0xfe8fffff [ 0.678582] pci 0000:00:06.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff [ 0.678582] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.678582] pci 0000:00:0a.0: IO window: disabled [ 0.678582] pci 0000:00:0a.0: MEM window: disabled [ 0.679614] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.679614] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.679614] pci 0000:03:00.0: IO window: 0xd000-0xdfff [ 0.679614] pci 0000:03:00.0: MEM window: 0xfe900000-0xfe9fffff [ 0.679614] pci 0000:03:00.0: PREFETCH window: disabled [ 0.679614] pci 0000:03:00.1: PCI bridge, secondary bus 0000:05 [ 0.679614] pci 0000:03:00.1: IO window: disabled [ 0.679614] pci 0000:03:00.1: MEM window: 0xfea00000-0xfeafffff [ 0.679614] pci 0000:03:00.1: PREFETCH window: disabled [ 0.680613] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 0.680613] pci 0000:00:0d.0: IO window: 0xd000-0xdfff [ 0.680613] pci 0000:00:0d.0: MEM window: 0xfe900000-0xfeafffff [ 0.680613] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.680613] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06 [ 0.680613] pci 0000:00:0e.0: IO window: disabled [ 0.680613] pci 0000:00:0e.0: MEM window: disabled [ 0.680613] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.680613] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07 [ 0.681579] pci 0000:00:0f.0: IO window: 0xe000-0xefff [ 0.681579] pci 0000:00:0f.0: MEM window: 0xfeb00000-0xfebfffff [ 0.681579] pci 0000:00:0f.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.681579] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.681579] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.681579] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.681579] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 0.681579] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 0.681579] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.681579] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.681579] initcall pcibios_assign_resources+0x0/0x87 returned 0 after 3 msecs [ 0.681579] calling inet_init+0x0/0x428 [ 0.682552] NET: Registered protocol family 2 [ 0.693460] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.695967] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.699957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.699957] TCP: Hash tables configured (established 524288 bind 65536) [ 0.700956] TCP reno registered [ 0.703968] initcall inet_init+0x0/0x428 returned 0 after 21 msecs [ 0.703968] calling af_unix_init+0x0/0x55 [ 0.703968] NET: Registered protocol family 1 [ 0.703968] initcall af_unix_init+0x0/0x55 returned 0 after 0 msecs [ 0.703968] calling default_rootfs+0x0/0x6b [ 0.703968] initcall default_rootfs+0x0/0x6b returned 0 after 0 msecs [ 0.704968] calling i8259A_init_sysfs+0x0/0x22 [ 0.704119] calling acpi_button_init+0x0/0x5e [ 0.704119] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.704968] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs [ 0.704968] calling vsyscall_init+0x0/0x6c [ 0.704968] initcall vsyscall_init+0x0/0x6c<6>ACPI: Power Button (FF) [PWRF] [ 0.704968] returned 0 after 0 msecs [ 0.705502] calling sbf_init+0x0/0xd7 [ 0.705502] initcall sbf_init+0x0/0xd7 returned 0 after 0 msecs [ 0.705502] calling i8237A_init_sysfs+0x0/0x22 [ 0.705294] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.705502] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs [ 0.705502] calling add_rtc_cmos+0x0/0x1d [ 0.705502] initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs [ 0.705502] calling cache_sysfs_init+0x0/0x5d [ 0.705294] ACPI: Power Button (CM) [PWRB] [ 0.706294] initcall acpi_button_init+0x0/0x5e returned 0 after 2 msecs [ 0.706294] calling acpi_thermal_init+0x0/0x83 [ 0.706294] initcall acpi_thermal_init+0x0/0x83 returned 0 after 0 msecs [ 0.706294] calling ehci_hcd_init+0x0/0x8b [ 0.706294] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 0.707546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 0.707546] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23 [ 0.707546] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 0.707546] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.706943] initcall cache_sysfs_init+0x0/0x5d returned 0 after 2 msecs [ 0.706943] calling mce_init_device+0x0/0x85 [ 0.707734] drivers/usb/core/inode.c: creating file 'devices' [ 0.707734] drivers/usb/core/inode.c: creating file '001' [ 0.707734] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.708151] initcall mce_init_device+0x0/0x85 returned 0 after 0 msecs [ 0.708151] calling periodic_mcheck_init+0x0/0x3f [ 0.708151] initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs [ 0.708151] calling thermal_throttle_init_device+0x0/0x83 [ 0.708151] initcall thermal_throttle_init_device+0x0/0x83 returned 0 after 0 msecs [ 0.708151] calling threshold_init_device+0x0/0x49 [ 0.716194] ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10 [ 0.716194] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 [ 0.716194] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park [ 0.716194] ehci_hcd 0000:00:02.1: park 0 [ 0.716194] ehci_hcd 0000:00:02.1: reset command 080b1a park=3 ithresh=8 Periodic period=256 Reset HALT [ 0.716194] ehci_hcd 0000:00:02.1: debug port 1 [ 0.716194] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.716194] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 0.716194] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfdffac00 [ 0.716194] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 0.716194] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 3.704156] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.732218] usb usb1: default language 0x0409 [ 10.338877] usb usb1: uevent [ 30.099005] usb usb1: usb_probe_device [ 30.099005] usb usb1: configuration #1 chosen from 1 choice [ 30.099005] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 30.099005] usb 1-0:1.0: uevent [ 30.099005] hub 1-0:1.0: usb_probe_interface [ 30.099005] hub 1-0:1.0: usb_probe_interface - got id [ 30.099005] hub 1-0:1.0: USB hub found [ 29.571755] initcall threshold_init_device+0x0/0x49 returned 0 after 27526 msecs [ 29.571755] calling msr_init+0x0/0xf2 [ 30.099005] hub 1-0:1.0: 10 ports detected [ 29.571755] initcall msr_init+0x0/0xf2 returned 0 after 0 msecs [ 29.571755] calling cpuid_init+0x0/0xf2 [ 30.099005] hub 1-0:1.0: standalone hub [ 30.099005] hub 1-0:1.0: no power switching (usb 1.0) [ 30.099005] hub 1-0:1.0: individual port over-current protection [ 30.099005] hub 1-0:1.0: power on to power good time: 20ms [ 30.099005] hub 1-0:1.0: local power source is good [ 30.099005] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 29.571755] initcall cpuid_init+0x0/0xf2 returned 0 after 0 msecs [ 29.573774] calling init_lapic_sysfs+0x0/0x2d [ 29.573774] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs [ 29.573774] calling ioapic_init_sysfs+0x0/0x99 [ 29.573774] initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs [ 29.573774] calling add_pcspkr+0x0/0x43 [ 29.573774] initcall add_pcspkr+0x0/0x43 returned 0 after 0 msecs [ 29.574769] calling uv_ptc_init+0x0/0x75 [ 29.574769] initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs [ 29.574769] calling uv_bau_init+0x0/0x5a1 [ 29.574769] initcall uv_bau_init+0x0/0x5a1 returned 0 after 0 msecs [ 29.574769] calling aes_init+0x0/0x12 [ 29.574769] initcall aes_init+0x0/0x12 returned 0 after 0 msecs [ 29.574769] calling init+0x0/0x12 [ 29.574806] initcall init+0x0/0x12 returned 0 after 0 msecs [ 29.575842] calling init_vdso_vars+0x0/0x1e7 [ 29.575842] initcall init_vdso_vars+0x0/0x1e7 returned 0 after 0 msecs [ 29.575842] calling ia32_binfmt_init+0x0/0x14 [ 29.575842] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs [ 29.575842] calling sysenter_setup+0x0/0x2b6 [ 29.575842] initcall sysenter_setup+0x0/0x2b6 returned 0 after 0 msecs [ 29.575842] calling create_proc_profile+0x0/0x2c7 [ 29.575842] initcall create_proc_profile+0x0/0x2c7 returned 0 after 0 msecs [ 29.576794] calling ioresources_init+0x0/0x3c [ 29.576794] initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs [ 29.576794] calling uid_cache_init+0x0/0x6e [ 29.576794] initcall uid_cache_init+0x0/0x6e returned 0 after 0 msecs [ 29.577758] calling init_posix_timers+0x0/0xb6 [ 29.577758] initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs [ 29.577758] calling init_posix_cpu_timers+0x0/0xd4 [ 29.577758] initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs [ 29.577758] calling nsproxy_cache_init+0x0/0x2d [ 29.577758] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs [ 29.578259] calling timekeeping_init_device+0x0/0x22 [ 29.578259] initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs [ 29.578259] calling init_clocksource_sysfs+0x0/0x50 [ 29.578259] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs [ 29.578259] calling init_timer_list_procfs+0x0/0x2c [ 29.578259] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs [ 29.579255] calling init_tstats_procfs+0x0/0x2c [ 29.579255] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs [ 29.579255] calling futex_init+0x0/0x63 [ 29.579255] initcall futex_init+0x0/0x63 returned 0 after 0 msecs [ 29.579255] calling proc_dma_init+0x0/0x22 [ 29.579255] initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs [ 29.579255] calling percpu_modinit+0x0/0x6e [ 29.580272] initcall percpu_modinit+0x0/0x6e returned 0 after 0 msecs [ 29.580272] calling kallsyms_init+0x0/0x25 [ 29.580272] initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs [ 29.580272] calling ikconfig_init+0x0/0x39 [ 29.580272] initcall ikconfig_init+0x0/0x39 returned 0 after 0 msecs [ 29.580272] calling init_kprobes+0x0/0x103 [ 29.583252] initcall init_kprobes+0x0/0x103 returned 0 after 2 msecs [ 29.583252] calling relay_init+0x0/0x14 [ 29.583252] initcall relay_init+0x0/0x14 returned 0 after 0 msecs [ 29.583252] calling utsname_sysctl_init+0x0/0x14 [ 29.583252] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 29.584252] calling init_per_zone_pages_min+0x0/0x53 [ 29.585298] initcall init_per_zone_pages_min+0x0/0x53 returned 0 after 1 msecs [ 29.585298] calling pdflush_init+0x0/0x1d [ 29.585298] initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs [ 29.585298] calling kswapd_init+0x0/0x63 [ 29.586514] initcall kswapd_init+0x0/0x63 returned 0 after 0 msecs [ 29.586514] calling setup_vmstat+0x0/0x4a [ 29.586514] initcall setup_vmstat+0x0/0x4a returned 0 after 0 msecs [ 29.586514] calling procswaps_init+0x0/0x22 [ 29.586514] initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs [ 29.586514] calling hugetlb_init+0x0/0xaa [ 29.586514] Total HugeTLB memory allocated, 0 [ 29.587253] initcall hugetlb_init+0x0/0xaa returned 0 after 0 msecs [ 29.587253] calling init_tmpfs+0x0/0xda [ 29.587253] initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs [ 29.587253] calling cpucache_init+0x0/0x39 [ 29.587253] initcall cpucache_init+0x0/0x39 returned 0 after 0 msecs [ 29.587253] calling fasync_init+0x0/0x2a [ 29.588335] initcall fasync_init+0x0/0x2a returned 0 after 0 msecs [ 29.588335] calling aio_setup+0x0/0x6e [ 29.588335] initcall aio_setup+0x0/0x6e returned 0 after 0 msecs [ 29.588335] calling inotify_setup+0x0/0x12 [ 29.588335] initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs [ 29.588335] calling inotify_user_setup+0x0/0xb8 [ 29.589374] initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs [ 29.589374] calling init_sys32_ioctl+0x0/0x83 [ 29.589374] initcall init_sys32_ioctl+0x0/0x83 returned 0 after 0 msecs [ 29.589374] calling init_mbcache+0x0/0x14 [ 29.589374] initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs [ 29.589374] calling dnotify_init+0x0/0x2a [ 29.590256] initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs [ 29.590256] calling init_devpts_fs+0x0/0x3f [ 29.590256] initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs [ 29.590256] calling init_ext3_fs+0x0/0x6a [ 29.590256] initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs [ 29.590256] calling journal_init+0x0/0x99 [ 29.591265] initcall journal_init+0x0/0x99 returned 0 after 0 msecs [ 29.591265] calling init_ext2_fs+0x0/0x6a [ 29.591265] initcall init_ext2_fs+0x0/0x6a returned 0 after 0 msecs [ 29.591265] calling init_ramfs_fs+0x0/0x12 [ 29.591265] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs [ 29.591265] calling init_hugetlbfs_fs+0x0/0x98 [ 29.591265] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs [ 29.591265] calling init_fat_fs+0x0/0x4f [ 29.592253] initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs [ 29.592253] calling init_msdos_fs+0x0/0x12 [ 29.592253] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs [ 29.592253] calling init_vfat_fs+0x0/0x12 [ 29.592253] initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs [ 29.592253] calling init_iso9660_fs+0x0/0x5a [ 29.593271] initcall init_iso9660_fs+0x0/0x5a returned 0 after 0 msecs [ 29.593271] calling init_nls_utf8+0x0/0x25 [ 29.593271] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs [ 29.593271] calling init_ntfs_fs+0x0/0x1d1 [ 29.593271] NTFS driver 2.1.29 [Flags: R/O]. [ 29.593271] initcall init_ntfs_fs+0x0/0x1d1 returned 0 after 0 msecs [ 29.593271] calling init_autofs4_fs+0x0/0x12 [ 29.593271] initcall init_autofs4_fs+0x0/0x12 returned 0 after 0 msecs [ 29.594295] calling init_udf_fs+0x0/0x5b [ 29.594295] initcall init_udf_fs+0x0/0x5b returned 0 after 0 msecs [ 29.594295] calling ipc_init+0x0/0x23 [ 29.594295] msgmni has been set to 32301 [ 29.594295] initcall ipc_init+0x0/0x23 returned 0 after 0 msecs [ 29.594295] calling ipc_sysctl_init+0x0/0x14 [ 29.594295] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 29.595344] calling init_mqueue_fs+0x0/0xc6 [ 29.595344] initcall init_mqueue_fs+0x0/0xc6 returned 0 after 0 msecs [ 29.595344] calling crypto_algapi_init+0x0/0xd [ 29.595344] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs [ 29.595344] calling blkcipher_module_init+0x0/0x2a [ 29.601488] initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs [ 29.601488] calling cryptomgr_init+0x0/0x12 [ 29.602603] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs [ 29.602603] calling hmac_module_init+0x0/0x12 [ 29.602603] initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs [ 29.602603] calling md5_mod_init+0x0/0x12 [ 29.602603] initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.602603] calling rmd128_mod_init+0x0/0x12 [ 29.602603] initcall rmd128_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.602603] calling rmd160_mod_init+0x0/0x12 [ 29.603103] initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.603103] calling rmd256_mod_init+0x0/0x12 [ 29.603103] initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.603103] calling rmd320_mod_init+0x0/0x12 [ 29.603103] initcall rmd320_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.603103] calling sha1_generic_mod_init+0x0/0x12 [ 29.603103] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.603103] calling sha256_generic_mod_init+0x0/0x3f [ 29.604121] initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 29.604121] calling sha512_generic_mod_init+0x0/0x3f [ 29.604121] initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 29.604121] calling crypto_cbc_module_init+0x0/0x12 [ 29.604121] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs [ 29.604121] calling blowfish_mod_init+0x0/0x12 [ 29.605160] initcall blowfish_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.605160] calling aes_init+0x0/0x323 [ 29.605160] initcall aes_init+0x0/0x323 returned 0 after 0 msecs [ 29.605160] calling lzo_mod_init+0x0/0x12 [ 29.605160] initcall lzo_mod_init+0x0/0x12 returned 0 after 0 msecs [ 29.605160] calling async_tx_init+0x0/0x16 [ 29.605160] async_tx: api initialized (sync-only) [ 29.605160] initcall async_tx_init+0x0/0x16 returned 0 after 0 msecs [ 29.606110] calling async_memcpy_init+0x0/0x8 [ 29.606110] initcall async_memcpy_init+0x0/0x8 returned 0 after 0 msecs [ 29.606110] calling async_xor_init+0x0/0x8 [ 29.606110] initcall async_xor_init+0x0/0x8 returned 0 after 0 msecs [ 29.606110] calling noop_init+0x0/0x14 [ 29.606110] io scheduler noop registered [ 29.606110] initcall noop_init+0x0/0x14 returned 0 after 0 msecs [ 29.606110] calling deadline_init+0x0/0x14 [ 29.607149] io scheduler deadline registered [ 29.607149] initcall deadline_init+0x0/0x14 returned 0 after 0 msecs [ 29.607149] calling cfq_init+0x0/0x9d [ 29.607149] io scheduler cfq registered (default) [ 29.607149] initcall cfq_init+0x0/0x9d returned 0 after 0 msecs [ 29.607149] calling percpu_counter_startup+0x0/0x14 [ 29.607149] initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs [ 29.608153] calling pci_init+0x0/0x35 [ 29.608153] pci 0000:00:00.0: Enabling HT MSI Mapping [ 29.618852] pci 0000:00:05.0: Enabling HT MSI Mapping [ 29.618852] pci 0000:00:05.1: Enabling HT MSI Mapping [ 29.618852] pci 0000:00:05.2: Enabling HT MSI Mapping [ 29.618852] pci 0000:00:06.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:00:08.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:00:09.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 29.619859] pci 0000:07:00.0: Boot video device [ 29.619859] initcall pci_init+0x0/0x35 returned 0 after 12 msecs [ 29.620833] calling pci_proc_init+0x0/0x6a [ 29.620865] initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs [ 29.620865] calling pcie_portdrv_init+0x0/0x4d [ 40.070978] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 30.149006] drivers/usb/core/inode.c: creating file '001' [ 30.149006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 40.070978] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 40.070978] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s [ 30.149006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.149006] usb usb1: Product: EHCI Host Controller [ 30.149006] usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd [ 30.149006] usb usb1: SerialNumber: 0000:00:02.1 [ 30.099074] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 30.099074] pcieport-driver 0000:00:0a.0: found MSI capability [ 30.099074] pci_express 0000:00:0a.0:pcie00: allocate port service [ 30.099074] pci_express 0000:00:0a.0:pcie01: allocate port service [ 30.099074] pci_express 0000:00:0a.0:pcie03: allocate port service [ 30.099074] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.099074] pcieport-driver 0000:00:0d.0: found MSI capability [ 30.099074] pci_express 0000:00:0d.0:pcie00: allocate port service [ 30.099074] pci_express 0000:00:0d.0:pcie01: allocate port service [ 30.099074] pci_express 0000:00:0d.0:pcie03: allocate port service [ 30.099074] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.099074] pcieport-driver 0000:00:0e.0: found MSI capability [ 30.099074] pci_express 0000:00:0e.0:pcie00: allocate port service [ 30.099074] pci_express 0000:00:0e.0:pcie01: allocate port service [ 30.099074] pci_express 0000:00:0e.0:pcie03: allocate port service [ 30.099074] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 30.099074] pcieport-driver 0000:00:0f.0: found MSI capability [ 30.099074] pci_express 0000:00:0f.0:pcie00: allocate port service [ 30.099074] pci_express 0000:00:0f.0:pcie01: allocate port service [ 30.099074] pci_express 0000:00:0f.0:pcie03: allocate port service [ 30.149006] initcall ehci_hcd_init+0x0/0x8b returned 0 after 27626 msecs [ 30.099074] initcall pcie_portdrv_init+0x0/0x4d returned 0 after 51 msecs [ 30.099074] calling aer_service_init+0x0/0x20 [ 30.149006] calling ohci_hcd_mod_init+0x0/0xa4 [ 30.149006] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.149006] ohci_hcd: block sizes: ed 80 td 96 [ 30.149006] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 [ 30.149006] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22 [ 30.149006] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.149006] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 30.149006] drivers/usb/core/inode.c: creating file '002' [ 30.149006] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 30.149006] ohci_hcd 0000:00:02.0: created debug files [ 30.149006] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 30.149006] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfdffb000 [ 30.099074] aer 0000:00:0a.0:pcie01: service driver aer loaded [ 30.099074] aer 0000:00:0d.0:pcie01: service driver aer loaded [ 30.099074] aer 0000:00:0e.0:pcie01: service driver aer loaded [ 30.099074] aer 0000:00:0f.0:pcie01: service driver aer loaded [ 30.099074] initcall aer_service_init+0x0/0x20 returned 0 after 13 msecs [ 30.099074] calling fb_console_init+0x0/0x129 [ 30.099074] initcall fb_console_init+0x0/0x129 returned 0 after 0 msecs [ 30.099074] calling vesafb_init+0x0/0x235 [ 30.099074] initcall vesafb_init+0x0/0x235 returned 0 after 0 msecs [ 30.099074] calling acpi_reserve_resources+0x0/0xeb [ 30.099074] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs [ 30.099074] calling acpi_fan_init+0x0/0x32 [ 30.099074] initcall acpi_fan_init+0x0/0x32 returned 0 after 0 msecs [ 30.099074] calling acpi_video_init+0x0/0x5e [ 30.099074] initcall acpi_video_init+0x0/0x5e returned 0 after 0 msecs [ 30.099074] calling irqrouter_init_sysfs+0x0/0x38 [ 30.099074] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs [ 30.099074] calling acpi_pci_slot_init+0x0/0x20 [ 30.099074] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 0 msecs [ 30.099074] calling acpi_processor_init+0x0/0xe9 [ 30.099074] ACPI: ACPI0007:00 is registered as cooling_device0 [ 30.099074] ACPI: ACPI0007:01 is registered as cooling_device1 [ 30.099074] ACPI: ACPI0007:02 is registered as cooling_device2 [ 30.099074] ACPI: ACPI0007:03 is registered as cooling_device3 [ 30.099074] ACPI: ACPI0007:04 is registered as cooling_device4 [ 30.099074] ACPI: ACPI0007:05 is registered as cooling_device5 [ 30.099074] ACPI: ACPI0007:06 is registered as cooling_device6 [ 30.099074] ACPI: ACPI0007:07 is registered as cooling_device7 [ 30.099074] initcall acpi_processor_init+0x0/0xe9 returned 0 after 3 msecs [ 30.099074] calling acpi_container_init+0x0/0x42 [ 30.099074] initcall acpi_container_init+0x0/0x42 returned 0 after 4 msecs [ 30.099074] calling rand_initialize+0x0/0x2c [ 30.099074] initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs [ 30.099074] calling tty_init+0x0/0x1c5 [ 30.099074] initcall tty_init+0x0/0x1c5 returned 0 after 11 msecs [ 30.099074] calling pty_init+0x0/0x46e [ 30.149007] ohci_hcd 0000:00:02.0: OHCI controller state [ 30.149007] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 30.149007] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 30.149007] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 30.149007] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 30.149007] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH [ 30.149007] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 30.149007] ohci_hcd 0000:00:02.0: roothub.a 0100120a POTPGT=1 NOCP NPS NDP=10(10) [ 30.149007] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 30.149007] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS [ 30.149007] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS [ 30.149007] usb usb2: default language 0x0409 [ 30.149007] usb usb2: uevent [ 30.149007] usb usb2: usb_probe_device [ 30.149007] usb usb2: configuration #1 chosen from 1 choice [ 30.149007] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 30.149007] usb 2-0:1.0: uevent [ 30.149007] hub 2-0:1.0: usb_probe_interface [ 30.149007] hub 2-0:1.0: usb_probe_interface - got id [ 30.149007] hub 2-0:1.0: USB hub found [ 30.149007] hub 2-0:1.0: 10 ports detected [ 30.149007] hub 2-0:1.0: standalone hub [ 30.149007] hub 2-0:1.0: no power switching (usb 1.0) [ 30.149007] hub 2-0:1.0: no over-current protection [ 30.149007] hub 2-0:1.0: power on to power good time: 2ms [ 30.149007] hub 2-0:1.0: local power source is good [ 30.149007] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 30.099076] initcall pty_init+0x0/0x46e returned 0 after 33 msecs [ 30.099076] calling rtc_init+0x0/0xa6 [ 30.099076] Real Time Clock Driver v1.12ac [ 30.099076] initcall rtc_init+0x0/0xa6 returned 0 after 0 msecs [ 30.099076] calling hpet_init+0x0/0x6a [ 30.099076] hpet_resources: 0xfed00000 is busy [ 30.099076] initcall hpet_init+0x0/0x6a returned 0 after 0 msecs [ 30.099076] calling agp_init+0x0/0x26 [ 30.099076] Linux agpgart interface v0.103 [ 30.099076] initcall agp_init+0x0/0x26 returned 0 after 0 msecs [ 30.099076] calling hangcheck_init+0x0/0x89 [ 30.099076] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 30.099076] Hangcheck: Using get_cycles(). [ 30.099076] initcall hangcheck_init+0x0/0x89 returned 0 after 0 msecs [ 30.099076] calling serial8250_init+0x0/0x131 [ 30.099076] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 30.099076] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.099076] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 30.099076] initcall serial8250_init+0x0/0x131 returned 0 after 1 msecs [ 30.099076] calling serial8250_pnp_init+0x0/0x12 [ 30.099076] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.099076] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 30.099076] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 0 msecs [ 30.099076] calling serial8250_pci_init+0x0/0x1b [ 40.095860] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [ 40.146860] ehci_hcd 0000:00:02.1: port 1 high speed [ 40.146860] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 30.223516] drivers/usb/core/inode.c: creating file '001' [ 30.223516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 30.223516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.223516] usb usb2: Product: OHCI Host Controller [ 30.223516] usb usb2: Manufacturer: Linux 2.6.26 ohci_hcd [ 30.223516] usb usb2: SerialNumber: 0000:00:02.0 [ 30.223516] initcall ohci_hcd_mod_init+0x0/0xa4 returned 0 after 150 msecs [ 30.099076] initcall serial8250_pci_init+0x0/0x1b returned 0 after 72 msecs [ 30.099076] calling topology_sysfs_init+0x0/0x49 [ 30.099076] initcall topology_sysfs_init+0x0/0x49 returned 0 after 0 msecs [ 30.099076] calling brd_init+0x0/0x18e [ 30.099076] brd: module loaded [ 30.099076] initcall brd_init+0x0/0x18e returned 0 after 1 msecs [ 30.099076] calling loop_init+0x0/0x1a1 [ 30.099076] loop: module loaded [ 30.099076] initcall loop_init+0x0/0x1a1 returned 0 after 0 msecs [ 30.099076] calling e1000_init_module+0x0/0x88 [ 30.099076] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 30.099076] Copyright (c) 1999-2006 Intel Corporation. [ 30.099076] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 30.099076] e1000 0000:04:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 40.182858] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 30.354012] e1000: 0000:04:00.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:a8:25:f0 [ 30.389014] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 30.390014] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 30.390014] e1000 0000:04:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 30.904009] e1000: 0000:04:00.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:a8:25:f1 [ 30.939014] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 30.939014] initcall e1000_init_module+0x0/0x88 returned 0 after 1049 msecs [ 30.940014] calling net_olddevs_init+0x0/0xa0 [ 30.940014] initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs [ 30.940014] calling init_nic+0x0/0x1b [ 30.940014] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 30.940014] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 30.941079] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 30.941079] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 30.942106] forcedeth 0000:00:08.0: ifname eth2, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:2b:ec [ 30.943074] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 30.943074] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20 [ 30.943074] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 20 (level, low) -> IRQ 20 [ 30.943074] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.945024] forcedeth 0000:00:09.0: ifname eth3, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:2b:ed [ 30.945024] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 30.946077] initcall init_nic+0x0/0x1b returned 0 after 5 msecs [ 30.946077] calling videodev_init+0x0/0x7d [ 30.946077] Linux video capture interface: v2.00 [ 30.946077] initcall videodev_init+0x0/0x7d returned 0 after 0 msecs [ 30.946077] calling v4l2_i2c_drv_init+0x0/0x104 [ 30.946077] initcall v4l2_i2c_drv_init+0x0/0x104 returned 0 after 0 msecs [ 30.946077] calling ir_init+0x0/0x14 [ 30.947081] initcall ir_init+0x0/0x14 returned 0 after 0 msecs [ 30.947081] calling saa7134_init+0x0/0x4a [ 30.947081] saa7130/34: v4l2 driver version 0.2.14 loaded [ 30.947081] saa7134 0000:05:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 30.947081] saa7134[0]: found at 0000:05:00.0, rev: 1, irq: 19, latency: 64, mmio: 0xfeaffc00 [ 30.947081] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected] [ 30.948105] saa7134[0]: board init: gpio is c806000 [ 30.955572] ohci_hcd 0000:00:02.0: auto-stop root hub [ 31.053963] tda829x_probe: driver disabled by Kconfig [ 31.053963] tuner' 0-0043: chip found @ 0x86 (saa7134[0]) [ 31.053963] tda9887 0-0043: creating new instance [ 31.053963] tda9887 0-0043: tda988[5/6/7] found [ 31.053963] tuner' 0-0043: type set to tda9887 [ 31.053963] tuner' 0-0043: tv freq set to 0.00 [ 31.053963] tuner' 0-0043: TV freq (0.00) out of range (44-958) [ 31.055944] tuner' 0-0043: saa7134[0] tuner' I2C addr 0x86 with type 74 used for 0x0e [ 31.057950] tea5767_autodetection: not probed - driver disabled by Kconfig [ 31.057950] tuner' 0-0060: Setting mode_mask to 0x0e [ 31.057950] tuner' 0-0060: chip found @ 0xc0 (saa7134[0]) [ 31.057950] tuner' 0-0060: tuner 0x60: Tuner type absent [ 31.098010] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 [ 31.098010] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff [ 31.098010] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff [ 31.099014] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.099014] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff [ 31.099014] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.100059] saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 11 e1 a1 ff ff ff ff ff ff ff ff [ 31.100059] saa7134[0]: i2c eeprom 70: 00 30 8d 18 3b 02 ff ff 74 50 ff ff ff ff ff ff [ 31.101025] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.101025] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.101025] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.102037] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.102037] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.103007] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.103007] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.103007] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 31.104096] tuner' 0-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00 [ 31.104096] tuner' 0-0043: set addr discarded for type 74, mask e. Asked to change tuner at addr 0xff, with mask e [ 31.104096] tuner' 0-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00 [ 31.104096] tuner' 0-0060: defining GPIO callback [ 31.110904] mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=22 [ 31.117897] mt20xx 0-0060: microtune MT2050 found, OK [ 31.117897] tuner' 0-0060: type set to MT2050 [ 31.117897] tuner' 0-0060: tv freq set to 400.00 [ 31.122907] tuner' 0-0060: saa7134[0] tuner' I2C addr 0xc0 with type 33 used for 0x0e [ 31.124894] tuner' 0-0043: switching to v4l2 [ 31.124894] tuner' 0-0060: switching to v4l2 [ 31.124894] tuner' 0-0060: tv freq set to 400.00 [ 31.129903] tuner' 0-0060: tv freq set to 400.00 [ 31.134905] saa7134[0]: registered device video0 [v4l2] [ 31.134905] saa7134[0]: registered device vbi0 [ 31.134905] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 31.137908] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 31.137908] initcall saa7134_init+0x0/0x4a returned 0 after 182 msecs [ 31.137908] calling empress_register+0x0/0x12 [ 31.137908] initcall empress_register+0x0/0x12 returned 0 after 0 msecs [ 31.137908] calling saa6752hs_init_module+0x0/0x14 [ 31.137908] initcall saa6752hs_init_module+0x0/0x14 returned 0 after 0 msecs [ 31.137908] calling dvb_register+0x0/0x12 [ 31.140905] DVB: registering new adapter (saa7134[0]) [ 31.141905] DVB: registering frontend 0 (Zarlink MT352 DVB-T)... [ 31.181227] initcall dvb_register+0x0/0x12 returned 0 after 41 msecs [ 31.181227] calling ide_init+0x0/0x76 [ 31.181227] Uniform Multi-Platform E-IDE driver [ 31.181227] initcall ide_init+0x0/0x76 returned 0 after 0 msecs [ 31.181227] calling amd74xx_ide_init+0x0/0x1b [ 31.181227] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 31.181227] NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0 [ 31.182227] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 31.182227] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. [ 31.182227] NFORCE-MCP55: IDE port disabled [ 31.182227] ide0: BM-DMA at 0xffa0-0xffa7 [ 31.182227] Probing IDE interface ide0... [ 31.863328] hda: PIONEER DVD-RW DVR-110, ATAPI CD/DVD-ROM drive [ 32.475319] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 32.475319] hda: UDMA/66 mode selected [ 32.475319] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 32.477330] initcall amd74xx_ide_init+0x0/0x1b returned 0 after 1235 msecs [ 32.477330] calling idedisk_init+0x0/0x12 [ 32.477330] initcall idedisk_init+0x0/0x12 returned 0 after 0 msecs [ 32.477330] calling ide_cdrom_init+0x0/0x12 [ 32.477924] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache [ 32.477924] Uniform CD-ROM driver Revision: 3.20 [ 32.496426] initcall ide_cdrom_init+0x0/0x12 returned 0 after 17 msecs [ 32.496426] calling sas_transport_init+0x0/0xbb [ 32.497425] initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs [ 32.503420] calling megasas_init+0x0/0x160 [ 32.503420] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 [ 32.503420] initcall megasas_init+0x0/0x160 returned 0 after 0 msecs [ 32.503420] calling init_sd+0x0/0xff [ 32.503420] Driver 'sd' needs updating - please use bus_type methods [ 32.503420] initcall init_sd+0x0/0xff returned 0 after 0 msecs [ 32.503420] calling init_sg+0x0/0xbf [ 32.503420] initcall init_sg+0x0/0xbf returned 0 after 0 msecs [ 32.503420] calling ahci_init+0x0/0x1b [ 32.504420] initcall ahci_init+0x0/0x1b returned 0 after 0 msecs [ 32.504420] calling nv_init+0x0/0x1b [ 32.504555] sata_nv 0000:00:05.0: version 3.5 [ 32.504555] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 32.504555] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 32.505560] sata_nv 0000:00:05.0: Using SWNCQ mode [ 32.505560] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 32.505521] ehci_hcd 0000:00:02.1: devpath 1 ep0in 3strikes [ 32.506587] scsi0 : sata_nv [ 32.506587] scsi1 : sata_nv [ 32.506587] ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 23 [ 32.506587] ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 23 [ 32.964566] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 32.965522] ehci_hcd 0000:00:02.1: devpath 1 ep0in 3strikes [ 32.967566] ata1.00: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133 [ 32.967566] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 32.968522] ehci_hcd 0000:00:02.1: devpath 1 ep0in 3strikes [ 32.970566] ata1.00: configured for UDMA/133 [ 33.019523] ehci_hcd 0000:00:02.1: port 1 high speed [ 33.019523] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001007 POWER sig=se0 PE CSC CONNECT [ 33.019523] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 33.025977] ehci_hcd 0000:00:02.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 33.025977] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s [ 33.129709] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 [ 33.180709] ehci_hcd 0000:00:02.1: port 3 full speed --> companion [ 33.180709] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT [ 33.180709] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 33.180709] ohci_hcd 0000:00:02.0: auto-wakeup root hub [ 33.231713] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003802 POWER OWNER sig=j CSC [ 33.231713] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 33.231713] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS [ 33.231713] hub 2-0:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 33.284672] ata2: SATA link down (SStatus 0 SControl 300) [ 33.284558] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5 [ 33.284558] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 33.284558] sd 0:0:0:0: [sda] Write Protect is off [ 33.285526] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.285526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.285526] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 33.285526] sd 0:0:0:0: [sda] Write Protect is off [ 33.286529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.286529] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.286529] sda: sda1 sda2 [ 33.297610] sd 0:0:0:0: [sda] Attached SCSI disk [ 33.297610] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.298619] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 [ 33.298619] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 33.298619] sata_nv 0000:00:05.1: Using SWNCQ mode [ 33.299536] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 33.299536] scsi2 : sata_nv [ 33.299536] scsi3 : sata_nv [ 33.299536] ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 22 [ 33.300674] ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 22 [ 33.335855] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 33.441846] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 33.492845] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 33.600522] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 33.665390] usb 2-3: ep0 maxpacket = 8 [ 33.684596] usb 2-3: default language 0x0409 [ 33.695016] usb 2-3: uevent [ 33.695016] usb 2-3: usb_probe_device [ 33.695016] usb 2-3: configuration #1 chosen from 1 choice [ 33.698016] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 33.698016] usb 2-3:1.0: uevent [ 33.698016] drivers/usb/core/inode.c: creating file '002' [ 33.698016] usb 2-3: New USB device found, idVendor=04f9, idProduct=0027 [ 33.698016] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 33.698020] usb 2-3: Product: HL-2030 series [ 33.698020] usb 2-3: Manufacturer: Brother [ 33.698020] usb 2-3: SerialNumber: E6J824776 [ 33.698020] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0002 [ 33.698020] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 33.698020] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s [ 33.756570] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.778523] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 33.778523] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 33.781524] ata3.00: configured for UDMA/133 [ 33.801952] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [ 33.852515] ehci_hcd 0000:00:02.1: port 1 high speed [ 33.852515] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 33.903509] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 34.097209] ata4: SATA link down (SStatus 0 SControl 300) [ 34.096496] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 34.096496] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 34.096496] sd 2:0:0:0: [sdb] Write Protect is off [ 34.097510] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 34.097510] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.097510] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 34.097510] sd 2:0:0:0: [sdb] Write Protect is off [ 34.097510] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 34.097510] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.097510] sdb: sdb1 sdb2 sdb3 [ 34.105565] sd 2:0:0:0: [sdb] Attached SCSI disk [ 34.105565] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 34.107516] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21 [ 34.107516] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21 [ 34.107516] sata_nv 0000:00:05.2: Using SWNCQ mode [ 34.107516] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 34.107516] scsi4 : sata_nv [ 34.108516] scsi5 : sata_nv [ 34.108516] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 21 [ 34.108516] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 21 [ 34.564935] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 34.583436] ata5.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 34.583436] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 34.589507] ata5.00: configured for UDMA/133 [ 34.905698] ata6: SATA link down (SStatus 0 SControl 300) [ 34.904484] scsi 4:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 34.904484] sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 34.904484] sd 4:0:0:0: [sdc] Write Protect is off [ 34.904484] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 34.905509] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.905509] sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 34.905509] sd 4:0:0:0: [sdc] Write Protect is off [ 34.905509] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 34.905509] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.905509] sdc: sdc1 sdc2 sdc3 [ 34.910585] sd 4:0:0:0: [sdc] Attached SCSI disk [ 34.910585] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 34.910585] initcall nv_init+0x0/0x1b returned 0 after 2295 msecs [ 34.910585] calling fusion_init+0x0/0xf8 [ 34.911609] Fusion MPT base driver 3.04.07 [ 34.911609] Copyright (c) 1999-2008 LSI Corporation [ 34.911609] initcall fusion_init+0x0/0xf8 returned 0 after 0 msecs [ 34.911609] calling mptsas_init+0x0/0xf5 [ 34.911609] Fusion MPT SAS Host driver 3.04.07 [ 34.911609] initcall mptsas_init+0x0/0xf5 returned 0 after 0 msecs [ 34.911609] calling mptctl_init+0x0/0x105 [ 34.911609] Fusion MPT misc device (ioctl) driver 3.04.07 [ 34.912606] mptctl: Registered with Fusion MPT base driver [ 34.912606] mptctl: /dev/mptctl @ (major,minor=10,220) [ 34.912606] initcall mptctl_init+0x0/0x105 returned 0 after 0 msecs [ 34.912606] calling ieee1394_init+0x0/0x256 [ 34.912606] initcall ieee1394_init+0x0/0x256 returned 0 after 0 msecs [ 34.912606] calling ohci1394_init+0x0/0x1b [ 34.913546] initcall ohci1394_init+0x0/0x1b returned 0 after 0 msecs [ 34.913546] calling video1394_init_module+0x0/0xc6 [ 34.913546] video1394: Installed video1394 module [ 34.913546] initcall video1394_init_module+0x0/0xc6 returned 0 after 0 msecs [ 34.913546] calling init_raw1394+0x0/0xf2 [ 34.913546] ieee1394: raw1394: /dev/raw1394 device initialized [ 34.913546] initcall init_raw1394+0x0/0xf2 returned 0 after 0 msecs [ 34.915510] calling sbp2_module_init+0x0/0x72 [ 34.915510] initcall sbp2_module_init+0x0/0x72 returned 0 after 0 msecs [ 34.915510] calling ether1394_init_module+0x0/0x70 [ 34.915510] initcall ether1394_init_module+0x0/0x70 returned 0 after 0 msecs [ 34.915510] calling cdrom_init+0x0/0xd [ 34.915510] initcall cdrom_init+0x0/0xd returned 0 after 0 msecs [ 34.915510] calling mon_init+0x0/0x103 [ 34.916516] initcall mon_init+0x0/0x103 returned 0 after 0 msecs [ 34.916516] calling usblp_init+0x0/0x1b [ 38.913944] usb 1-1: khubd timed out on ep0in len=18/64 [ 38.964510] ehci_hcd 0000:00:02.1: port 1 high speed [ 38.964510] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 44.028856] usb 1-1: khubd timed out on ep0out len=0/0 [ 49.239049] usb 1-1: khubd timed out on ep0out len=0/0 [ 49.439974] usb 1-1: device not accepting address 4, error -110 [ 49.490977] ehci_hcd 0000:00:02.1: port 1 high speed [ 49.490977] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 49.541964] usb 1-1: new high speed USB device using ehci_hcd and address 5 [ 54.551361] usb 1-1: khubd timed out on ep0in len=18/64 [ 54.602333] ehci_hcd 0000:00:02.1: port 1 high speed [ 54.602333] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 59.662745] usb 1-1: khubd timed out on ep0out len=0/0 [ 64.873638] usb 1-1: khubd timed out on ep0out len=0/0 [ 65.074567] usb 1-1: device not accepting address 5, error -110 [ 65.125571] ehci_hcd 0000:00:02.1: port 1 high speed [ 65.125571] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 65.176571] usb 1-1: new high speed USB device using ehci_hcd and address 6 [ 70.186433] usb 1-1: khubd timed out on ep0out len=0/0 [ 75.397368] usb 1-1: khubd timed out on ep0out len=0/0 [ 75.598343] usb 1-1: device not accepting address 6, error -110 [ 75.649338] ehci_hcd 0000:00:02.1: port 1 high speed [ 75.649338] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 75.700336] usb 1-1: new high speed USB device using ehci_hcd and address 7 [ 80.710515] usb 1-1: khubd timed out on ep0out len=0/0 [ 85.921510] usb 1-1: khubd timed out on ep0out len=0/0 [ 86.122441] usb 1-1: device not accepting address 7, error -110 [ 86.122441] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 86.128442] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 86.127523] usblp 2-3:1.0: usb_probe_interface [ 86.127523] usblp 2-3:1.0: usb_probe_interface - got id [ 86.135442] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 86.135442] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027 [ 86.135442] usbcore: registered new interface driver usblp [ 86.141447] initcall usblp_init+0x0/0x1b returned 0 after 48852 msecs [ 86.141447] calling usb_stor_init+0x0/0x50 [ 86.141447] Initializing USB Mass Storage driver... [ 86.142483] usbcore: registered new interface driver usb-storage [ 86.142483] USB Mass Storage support registered. [ 86.142483] initcall usb_stor_init+0x0/0x50 returned 0 after 0 msecs [ 86.142483] calling usb_usual_init+0x0/0x3e [ 86.142483] usbcore: registered new interface driver libusual [ 86.142483] initcall usb_usual_init+0x0/0x3e returned 0 after 0 msecs [ 86.142483] calling i8042_init+0x0/0x39f [ 86.143335] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 86.145403] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 86.146484] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 86.146484] initcall i8042_init+0x0/0x39f returned 0 after 3 msecs [ 86.146484] calling mousedev_init+0x0/0x8e [ 86.146484] mice: PS/2 mouse device common for all mice [ 86.146484] initcall mousedev_init+0x0/0x8e returned 0 after 0 msecs [ 86.146484] calling evdev_init+0x0/0x12 [ 86.154260] initcall evdev_init+0x0/0x12 returned 0 after 7 msecs [ 86.154260] calling atkbd_init+0x0/0x27 [ 86.154260] initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs [ 86.154260] calling psmouse_init+0x0/0x6d [ 86.175261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 86.204124] initcall psmouse_init+0x0/0x6d returned 0 after 47 msecs [ 86.204124] calling i2c_dev_init+0x0/0x9e [ 86.204124] i2c /dev entries driver [ 86.205115] initcall i2c_dev_init+0x0/0x9e returned 0 after 0 msecs [ 86.205115] calling nforce2_init+0x0/0x1b [ 86.205078] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2d00 [ 86.205078] i2c-adapter i2c-2: nForce2 SMBus adapter at 0x2e00 [ 86.206078] initcall nforce2_init+0x0/0x1b returned 0 after 0 msecs [ 86.206078] calling sm_lm85_init+0x0/0x14 [ 86.223515] i2c-adapter i2c-2: lm85: Detected SMSC chip [ 86.223515] i2c-adapter i2c-2: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. [ 86.223515] hwmon-vid: Unknown VRM version of your x86 CPU [ 86.237521] i2c-adapter i2c-2: lm85: Detected SMSC chip [ 86.237521] i2c-adapter i2c-2: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. [ 86.237521] hwmon-vid: Unknown VRM version of your x86 CPU [ 86.245512] initcall sm_lm85_init+0x0/0x14 returned 0 after 37 msecs [ 86.245512] calling linear_init+0x0/0x12 [ 86.245512] md: linear personality registered for level -1 [ 86.245512] initcall linear_init+0x0/0x12 returned 0 after 0 msecs [ 86.245512] calling raid0_init+0x0/0x12 [ 86.245512] md: raid0 personality registered for level 0 [ 86.245512] initcall raid0_init+0x0/0x12 returned 0 after 0 msecs [ 86.245512] calling raid_init+0x0/0x12 [ 86.245512] md: raid1 personality registered for level 1 [ 86.246612] initcall raid_init+0x0/0x12 returned 0 after 0 msecs [ 86.246612] calling raid5_init+0x0/0x3e [ 86.263618] raid6: int64x1 2050 MB/s [ 86.280618] raid6: int64x2 2765 MB/s [ 86.297617] raid6: int64x4 2269 MB/s [ 86.314617] raid6: int64x8 1488 MB/s [ 86.331607] raid6: sse2x1 2949 MB/s [ 86.348607] raid6: sse2x2 4921 MB/s [ 86.365607] raid6: sse2x4 6031 MB/s [ 86.365607] raid6: using algorithm sse2x4 (6031 MB/s) [ 86.365607] md: raid6 personality registered for level 6 [ 86.365607] md: raid5 personality registered for level 5 [ 86.365607] md: raid4 personality registered for level 4 [ 86.365607] initcall raid5_init+0x0/0x3e returned 0 after 113 msecs [ 86.365607] calling dm_init+0x0/0x49 [ 86.365607] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 86.366715] initcall dm_init+0x0/0x49 returned 0 after 0 msecs [ 86.366715] calling dm_crypt_init+0x0/0x69 [ 86.366715] initcall dm_crypt_init+0x0/0x69 returned 0 after 0 msecs [ 86.366715] calling dm_snapshot_init+0x0/0x1f1 [ 86.366715] initcall dm_snapshot_init+0x0/0x1f1 returned 0 after 0 msecs [ 86.366715] calling dm_mirror_init+0x0/0x2f [ 86.367924] initcall dm_mirror_init+0x0/0x2f returned 0 after 0 msecs [ 86.367924] calling dm_dirty_log_init+0x0/0x59 [ 86.367924] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 msecs [ 86.367924] calling dm_zero_init+0x0/0x31 [ 86.367924] initcall dm_zero_init+0x0/0x31 returned 0 after 0 msecs [ 86.367924] calling edac_init+0x0/0x9d [ 86.367924] EDAC MC: Ver: 2.1.0 Jul 19 2008 [ 86.369504] initcall edac_init+0x0/0x9d returned 0 after 0 msecs [ 86.369504] calling cpufreq_stats_init+0x0/0x8f [ 86.369504] initcall cpufreq_stats_init+0x0/0x8f returned 0 after 0 msecs [ 86.369504] calling cpufreq_gov_powersave_init+0x0/0x12 [ 86.369504] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 msecs [ 86.369504] calling cpufreq_gov_userspace_init+0x0/0x12 [ 86.369504] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs [ 86.370504] calling cpufreq_gov_dbs_init+0x0/0x46 [ 86.370504] initcall cpufreq_gov_dbs_init+0x0/0x46 returned 0 after 0 msecs [ 86.370504] calling cpufreq_gov_dbs_init+0x0/0x12 [ 86.370504] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs [ 86.370504] calling hid_init+0x0/0xb [ 86.371504] initcall hid_init+0x0/0xb returned 0 after 0 msecs [ 86.371504] calling hid_init+0x0/0x62 [ 86.371504] usbcore: registered new interface driver hiddev [ 86.371504] usbcore: registered new interface driver usbhid [ 86.371504] usbhid: v2.6:USB HID core driver [ 86.371504] initcall hid_init+0x0/0x62 returned 0 after 0 msecs [ 86.371504] calling init_soundcore+0x0/0x59 [ 86.371504] initcall init_soundcore+0x0/0x59 returned 0 after 0 msecs [ 86.372503] calling alsa_sound_init+0x0/0x87 [ 86.372503] Advanced Linux Sound Architecture Driver Version 1.0.17. [ 86.372503] initcall alsa_sound_init+0x0/0x87 returned 0 after 0 msecs [ 86.372503] calling alsa_hwdep_init+0x0/0x64 [ 86.372503] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 0 msecs [ 86.372503] calling alsa_timer_init+0x0/0x162 [ 86.372503] initcall alsa_timer_init+0x0/0x162 returned 0 after 0 msecs [ 86.372555] calling rtctimer_init+0x0/0x115 [ 86.373606] initcall rtctimer_init+0x0/0x115 returned 0 after 0 msecs [ 86.373606] calling alsa_pcm_init+0x0/0x6c [ 86.373606] initcall alsa_pcm_init+0x0/0x6c returned 0 after 0 msecs [ 86.373606] calling snd_mem_init+0x0/0x2c [ 86.373606] initcall snd_mem_init+0x0/0x2c returned 0 after 0 msecs [ 86.373606] calling alsa_rawmidi_init+0x0/0x80 [ 86.373606] initcall alsa_rawmidi_init+0x0/0x80 returned 0 after 0 msecs [ 86.373606] calling alsa_mixer_oss_init+0x0/0x3a [ 86.374603] initcall alsa_mixer_oss_init+0x0/0x3a returned 0 after 0 msecs [ 86.374603] calling alsa_pcm_oss_init+0x0/0x7d [ 86.374603] initcall alsa_pcm_oss_init+0x0/0x7d returned 0 after 0 msecs [ 86.374603] calling alsa_seq_oss_init+0x0/0x16c [ 86.374603] initcall alsa_seq_oss_init+0x0/0x16c returned 0 after 0 msecs [ 86.374603] calling alsa_seq_init+0x0/0x57 [ 86.375599] initcall alsa_seq_init+0x0/0x57 returned 0 after 0 msecs [ 86.375599] calling alsa_seq_device_init+0x0/0x5b [ 86.375599] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 0 msecs [ 86.375599] calling alsa_seq_midi_event_init+0x0/0x8 [ 86.375599] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 msecs [ 86.375599] calling alsa_seq_midi_init+0x0/0x3a [ 86.375599] initcall alsa_seq_midi_init+0x0/0x3a returned 0 after 0 msecs [ 86.376126] calling alsa_seq_midi_emul_init+0x0/0x8 [ 86.376126] initcall alsa_seq_midi_emul_init+0x0/0x8 returned 0 after 0 msecs [ 86.376126] calling alsa_opl3_init+0x0/0x8 [ 86.376126] initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 msecs [ 86.376126] calling alsa_opl3_seq_init+0x0/0x1e [ 86.376126] initcall alsa_opl3_seq_init+0x0/0x1e returned 0 after 0 msecs [ 86.376126] calling alsa_mpu401_uart_init+0x0/0x8 [ 86.376126] initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 msecs [ 86.376535] calling alsa_card_cmipci_init+0x0/0x1b [ 86.377535] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 86.377535] C-Media PCI 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 86.384509] initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 7 msecs [ 86.384509] calling snd_usb_audio_init+0x0/0x3d [ 86.384509] usbcore: registered new interface driver snd-usb-audio [ 86.384509] initcall snd_usb_audio_init+0x0/0x3d returned 0 after 0 msecs [ 86.385621] calling alsa_sound_last_init+0x0/0x61 [ 86.385621] ALSA device list: [ 86.385621] #0: C-Media CMI8768 at 0xc800, irq 17 [ 86.385621] initcall alsa_sound_last_init+0x0/0x61 returned 0 after 0 msecs [ 86.385621] calling sysctl_core_init+0x0/0x12 [ 86.385621] initcall sysctl_core_init+0x0/0x12 returned 0 after 0 msecs [ 86.385621] calling flow_cache_init+0x0/0x1bb [ 86.386605] initcall flow_cache_init+0x0/0x1bb returned 0 after 0 msecs [ 86.386605] calling blackhole_module_init+0x0/0x12 [ 86.386605] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 msecs [ 86.386605] calling sysctl_ipv4_init+0x0/0x4e [ 86.387590] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs [ 86.387590] calling init_syncookies+0x0/0x19 [ 86.387590] initcall init_syncookies+0x0/0x19 returned 0 after 0 msecs [ 86.387590] calling ipv4_netfilter_init+0x0/0x12 [ 86.387590] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 msecs [ 86.387590] calling inet_diag_init+0x0/0x69 [ 86.387590] initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs [ 86.388090] calling tcp_diag_init+0x0/0x12 [ 86.388090] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs [ 86.388090] calling bictcp_register+0x0/0x12 [ 86.388090] TCP bic registered [ 86.388090] initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs [ 86.388090] calling cubictcp_register+0x0/0x6e [ 86.388090] TCP cubic registered [ 86.388090] initcall cubictcp_register+0x0/0x6e returned 0 after 0 msecs [ 86.389122] calling tcp_westwood_register+0x0/0x12 [ 86.389122] TCP westwood registered [ 86.389122] initcall tcp_westwood_register+0x0/0x12 returned 0 after 0 msecs [ 86.389122] calling hstcp_register+0x0/0x12 [ 86.389122] TCP highspeed registered [ 86.389122] initcall hstcp_register+0x0/0x12 returned 0 after 0 msecs [ 86.389122] calling hybla_register+0x0/0x12 [ 86.389513] TCP hybla registered [ 86.390513] initcall hybla_register+0x0/0x12 returned 0 after 0 msecs [ 86.390513] calling htcp_register+0x0/0x12 [ 86.390513] TCP htcp registered [ 86.390513] initcall htcp_register+0x0/0x12 returned 0 after 0 msecs [ 86.390513] calling tcp_vegas_register+0x0/0x14 [ 86.390513] TCP vegas registered [ 86.390513] initcall tcp_vegas_register+0x0/0x14 returned 0 after 0 msecs [ 86.391513] calling tcp_veno_register+0x0/0x14 [ 86.391513] TCP veno registered [ 86.391513] initcall tcp_veno_register+0x0/0x14 returned 0 after 0 msecs [ 86.391513] calling tcp_scalable_register+0x0/0x12 [ 86.391513] TCP scalable registered [ 86.391513] initcall tcp_scalable_register+0x0/0x12 returned 0 after 0 msecs [ 86.391513] calling tcp_lp_register+0x0/0x12 [ 86.391518] TCP lp registered [ 86.392518] initcall tcp_lp_register+0x0/0x12 returned 0 after 0 msecs [ 86.392518] calling tcp_yeah_register+0x0/0x14 [ 86.392518] TCP yeah registered [ 86.392518] initcall tcp_yeah_register+0x0/0x14 returned 0 after 0 msecs [ 86.392518] calling tcp_illinois_register+0x0/0x12 [ 86.392518] TCP illinois registered [ 86.392518] initcall tcp_illinois_register+0x0/0x12 returned 0 after 0 msecs [ 86.393518] calling inet6_init+0x0/0x320 [ 86.393518] NET: Registered protocol family 10 [ 86.394518] lo: Disabled Privacy Extensions [ 86.395517] initcall inet6_init+0x0/0x320 returned 0 after 2 msecs [ 86.395552] calling packet_init+0x0/0x47 [ 86.396592] NET: Registered protocol family 17 [ 86.396592] initcall packet_init+0x0/0x47 returned 0 after 0 msecs [ 86.396592] calling powernowk8_init+0x0/0x92 [ 86.396353] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2354 processors (8 cpu cores) (version 2.20.00) [ 86.396592] powernow-k8: 0 : pstate 0 (2200 MHz) [ 86.397632] powernow-k8: 1 : pstate 1 (2000 MHz) [ 86.397632] powernow-k8: 2 : pstate 2 (1700 MHz) [ 86.397632] powernow-k8: 3 : pstate 3 (1400 MHz) [ 86.397632] powernow-k8: 4 : pstate 4 (1100 MHz) [ 86.399969] powernow-k8: 0 : pstate 0 (2200 MHz) [ 86.399969] powernow-k8: 1 : pstate 1 (2000 MHz) [ 86.399969] powernow-k8: 2 : pstate 2 (1700 MHz) [ 86.399969] powernow-k8: 3 : pstate 3 (1400 MHz) [ 86.399969] powernow-k8: 4 : pstate 4 (1100 MHz) [ 86.399387] initcall powernowk8_init+0x0/0x92 returned 0 after 2 msecs [ 86.399387] calling hpet_insert_resource+0x0/0x23 [ 86.399387] initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs [ 86.400398] calling update_mp_table+0x0/0x492 [ 86.400398] initcall update_mp_table+0x0/0x492 returned 0 after 0 msecs [ 86.400398] calling lapic_insert_resource+0x0/0x40 [ 86.400398] initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs [ 86.400398] calling init_lapic_nmi_sysfs+0x0/0x38 [ 86.400398] initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs [ 86.400398] calling ioapic_insert_resources+0x0/0x4f [ 86.401433] initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs [ 86.401433] calling check_early_ioremap_leak+0x0/0x42 [ 86.401433] initcall check_early_ioremap_leak+0x0/0x42 returned 0 after 0 msecs [ 86.401433] calling init_oops_id+0x0/0x23 [ 86.401433] initcall init_oops_id+0x0/0x23 returned 0 after 0 msecs [ 86.402444] calling disable_boot_consoles+0x0/0x3a [ 86.402444] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs [ 86.402444] calling pm_qos_power_init+0x0/0x61 [ 86.402444] initcall pm_qos_power_init+0x0/0x61 returned 0 after 0 msecs [ 86.402444] calling debugfs_kprobe_init+0x0/0x89 [ 86.403461] initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs [ 86.403461] calling random32_reseed+0x0/0x6c [ 86.403461] initcall random32_reseed+0x0/0x6c returned 0 after 0 msecs [ 86.403461] calling pci_sysfs_init+0x0/0x4c [ 86.403461] initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs [ 86.403461] calling acpi_wakeup_device_init+0x0/0xb1 [ 86.404502] initcall acpi_wakeup_device_init+0x0/0xb1 returned 0 after 0 msecs [ 86.404502] calling seqgen_init+0x0/0xf [ 86.404502] initcall seqgen_init+0x0/0xf returned 0 after 0 msecs [ 86.404502] calling saa7134_alsa_init+0x0/0x6e [ 86.404502] saa7134 ALSA driver for DMA sound loaded [ 86.404502] saa7134[0]/alsa: saa7134[0] at 0xfeaffc00 irq 19 registered as card -1 [ 86.405432] initcall saa7134_alsa_init+0x0/0x6e returned 0 after 0 msecs [ 86.405432] calling scsi_complete_async_scans+0x0/0x10c [ 86.406419] initcall scsi_complete_async_scans+0x0/0x10c returned 0 after 0 msecs [ 86.406419] calling memmap_init+0x0/0x98 [ 86.406419] initcall memmap_init+0x0/0x98 returned 0 after 0 msecs [ 86.406419] calling pci_mmcfg_late_insert_resources+0x0/0x43 [ 86.406419] initcall pci_mmcfg_late_insert_resources+0x0/0x43 returned 0 after 0 msecs [ 86.407521] calling tcp_congestion_default+0x0/0x12 [ 86.407521] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs [ 86.407521] md: Autodetecting RAID arrays. [ 86.407521] md: Scanned 0 and added 0 devices. [ 86.407521] md: autorun ... [ 86.408448] md: ... autorun DONE. [ 92.683256] kjournald starting. Commit interval 5 seconds [ 86.426397] EXT3-fs: mounted filesystem with ordered data mode. [ 86.426397] VFS: Mounted root (ext3 filesystem) readonly. [ 86.426397] Freeing unused kernel memory: 320k freed [ 86.426397] Write protecting the kernel read-only data: 5328k [ 87.102942] md: md0 stopped. [ 87.239209] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0002 [ 87.239209] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 87.239209] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s [ 87.303980] md: bind [ 87.303980] md: bind [ 87.310140] raid1: raid set md0 active with 2 out of 2 mirrors [ 87.342953] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [ 87.343946] md0: bitmap initialized from disk: read 15/15 pages, set 28 bits [ 87.343946] created bitmap (233 pages) for device md0 [ 87.395982] ehci_hcd 0000:00:02.1: port 1 high speed [ 87.395982] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 87.445005] usb 1-1: new high speed USB device using ehci_hcd and address 8 [ 92.986963] kjournald starting. Commit interval 5 seconds [ 87.712771] EXT3-fs: mounted filesystem with ordered data mode. [ 93.198925] usb usb2: uevent [ 93.198925] usb 2-0:1.0: uevent [ 93.198925] usb 2-3: uevent [ 93.198925] usb 2-3:1.0: uevent [ 93.198925] usb usb1: uevent [ 93.198925] usb 1-0:1.0: uevent [ 90.481955] ehci_hcd 0000:00:02.1: port 1 high speed [ 90.481955] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 90.558954] usb 1-1: uevent [ 90.558954] usb 1-1: usb_probe_device [ 90.558954] usb 1-1: configuration #1 chosen from 1 choice [ 90.558954] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 90.558954] usb 1-1:1.0: uevent [ 90.558954] hub 1-1:1.0: usb_probe_interface [ 90.558954] hub 1-1:1.0: usb_probe_interface - got id [ 90.558954] hub 1-1:1.0: USB hub found [ 90.558954] hub 1-1:1.0: 2 ports detected [ 90.558954] hub 1-1:1.0: compound device; port removable status: FR [ 90.558954] hub 1-1:1.0: individual port power switching [ 90.558954] hub 1-1:1.0: individual port over-current protection [ 90.558954] hub 1-1:1.0: Single TT [ 90.558954] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 90.558954] hub 1-1:1.0: power on to power good time: 100ms [ 90.559953] hub 1-1:1.0: local power source is good [ 90.559953] hub 1-1:1.0: enabling power on all ports [ 90.661003] usb 1-1: link qh256-0001/ffff88007f800140 start 255 [1/0 us] [ 90.661003] drivers/usb/core/inode.c: creating file '008' [ 90.661003] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 90.661003] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 90.661003] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0000 [ 90.843242] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 90.844243] Symbol init_mm is marked as UNUSED, however this module is using it. [ 90.844243] This symbol will go away in the future. [ 90.844243] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. [ 93.317784] [fglrx] vendor: 1002 device: 95c0 count: 1 [ 93.317784] [fglrx] Maximum main memory to use for locked dma buffers: 15775 MBytes. [ 93.317784] [fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured [ 93.317784] [fglrx] PAT is disabled! [ 93.317784] [fglrx] module loaded - fglrx 8.50.3 [Jun 2 2008] with 1 minors [ 91.671112] usb 1-1: khubd timed out on ep0in len=4/4 [ 91.726113] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 91.994613] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 92.168034] usb 1-1.1: new high speed USB device using ehci_hcd and address 9 [ 92.533476] usb 1-1.1: uevent [ 92.533476] usb 1-1.1: usb_probe_device [ 92.533476] usb 1-1.1: configuration #1 chosen from 1 choice [ 92.538450] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 92.538450] usb 1-1.1:1.0: uevent [ 92.538450] hub 1-1.1:1.0: usb_probe_interface [ 92.538450] hub 1-1.1:1.0: usb_probe_interface - got id [ 92.538450] hub 1-1.1:1.0: USB hub found [ 92.543446] hub 1-1.1:1.0: 4 ports detected [ 92.543446] hub 1-1.1:1.0: compound device; port removable status: FRRR [ 92.543446] hub 1-1.1:1.0: ganged power switching [ 92.543446] hub 1-1.1:1.0: global over-current protection [ 92.548450] hub 1-1.1:1.0: TT per port [ 92.548450] hub 1-1.1:1.0: TT requires at most 8 FS bit times (666 ns) [ 92.548450] hub 1-1.1:1.0: power on to power good time: 100ms [ 92.558444] hub 1-1.1:1.0: local power source is good [ 92.558444] hub 1-1.1:1.0: no over-current condition exists [ 92.558444] hub 1-1.1:1.0: enabling power on all ports [ 92.678492] usb 1-1.1: link qh256-0001/ffff88007f800280 start 255 [1/0 us] [ 92.678492] drivers/usb/core/inode.c: creating file '009' [ 92.678492] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2602 [ 92.678492] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 92.747587] hub 1-1:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 93.012738] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 93.182538] usb 1-1.2: new high speed USB device using ehci_hcd and address 10 [ 93.773343] usb 1-1.2: skipped 1 descriptor after configuration [ 93.773343] usb 1-1.2: skipped 11 descriptors after interface [ 93.773343] usb 1-1.2: skipped 1 descriptor after endpoint [ 93.773343] usb 1-1.2: skipped 17 descriptors after interface [ 93.773343] usb 1-1.2: skipped 1 descriptor after endpoint [ 93.773343] usb 1-1.2: skipped 4 descriptors after interface [ 93.773343] usb 1-1.2: skipped 1 descriptor after endpoint [ 93.773343] usb 1-1.2: skipped 1 descriptor after endpoint [ 93.773343] usb 1-1.2: skipped 2 descriptors after interface [ 93.773343] usb 1-1.2: skipped 1 descriptor after endpoint [ 93.776300] usb 1-1.2: default language 0x0409 [ 93.780244] usb 1-1.2: uevent [ 93.780244] usb 1-1.2: usb_probe_device [ 93.780244] usb 1-1.2: configuration #1 chosen from 1 choice [ 93.780244] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 93.780244] usb 1-1.2:1.0: uevent [ 93.780244] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) [ 93.780244] usb 1-1.2:1.1: uevent [ 93.780244] usb 1-1.2: adding 1-1.2:1.2 (config #1, interface 2) [ 93.780244] usb 1-1.2:1.2: uevent [ 93.780244] snd-usb-audio 1-1.2:1.2: usb_probe_interface [ 93.780244] snd-usb-audio 1-1.2:1.2: usb_probe_interface - got id [ 93.823238] usb 1-1.2: adding 1-1.2:1.3 (config #1, interface 3) [ 93.823238] usb 1-1.2:1.3: uevent [ 93.823238] drivers/usb/core/inode.c: creating file '010' [ 93.823238] usb 1-1.2: New USB device found, idVendor=046d, idProduct=08ce [ 93.823238] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 93.823238] usb 1-1.2: SerialNumber: 48ADA3A2 [ 93.823238] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0004 [ 93.826247] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0006 [ 93.829237] hub 1-1.1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 94.667902] hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 94.678897] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms [ 94.029310] usb 1-1.1.1: new high speed USB device using ehci_hcd and address 11 [ 94.099355] ------------[ cut here ]------------ [ 94.099355] WARNING: at include/linux/blkdev.h:447 blk_plug_device+0x5e/0x97() [ 94.099355] Modules linked in: fglrx(P) [ 94.099355] Pid: 3065, comm: mount Tainted: P 2.6.26 #03414-g33af79d-dirty [ 94.099355] [ 94.099355] Call Trace: [ 94.099355] [] warn_on_slowpath+0x58/0x86 [ 94.099355] [] ? bitmap_get_counter+0x156/0x1fa [ 94.099355] [] blk_plug_device+0x5e/0x97 [ 94.099355] [] bitmap_startwrite+0x12a/0x172 [ 94.099355] [] ? bio_alloc_bioset+0x4b/0x8f [ 94.099355] [] make_request+0x5c3/0x658 [ 94.099355] [] ? up_read+0x9/0xb [ 94.099355] [] generic_make_request+0x1e3/0x21a [ 94.099355] [] ? bvec_alloc_bs+0x81/0xa7 [ 94.099355] [] submit_bio+0x111/0x11a [ 94.099355] [] submit_bh+0xf0/0x114 [ 94.099355] [] __block_write_full_page+0x1c2/0x2ae [ 94.099355] [] ? blkdev_get_block+0x0/0x4d [ 94.099355] [] ? blkdev_get_block+0x0/0x4d [ 94.099355] [] block_write_full_page+0xf2/0xfb [ 94.099355] [] blkdev_writepage+0x13/0x15 [ 94.099355] [] __writepage+0x12/0x2b [ 94.099355] [] write_cache_pages+0x1ae/0x318 [ 94.099355] [] ? __writepage+0x0/0x2b [ 94.099355] [] ? d_splice_alias+0xec/0xf8 [ 94.099355] [] ? __d_lookup+0xe3/0x149 [ 94.099355] [] generic_writepages+0x1f/0x25 [ 94.099355] [] do_writepages+0x28/0x37 [ 94.099355] [] __filemap_fdatawrite_range+0x55/0x60 [ 94.099355] [] filemap_fdatawrite+0x1a/0x1c [ 94.099355] [] filemap_write_and_wait+0x19/0x38 [ 94.099355] [] sync_blockdev+0x1b/0x1d [ 94.099355] [] __fsync_super+0x5e/0x6f [ 94.099355] [] fsync_super+0x11/0x21 [ 94.099355] [] do_remount_sb+0x4a/0x194 [ 94.099355] [] do_remount+0x111/0x147 [ 94.099355] [] do_mount+0x147/0x1de [ 94.099355] [] ? handle_mm_fault+0x1f9/0x6e5 [ 94.099355] [] ? __alloc_pages_nodemask+0x9/0xb [ 94.099355] [] ? alloc_pages_current+0x96/0x9f [ 94.099355] [] sys_mount+0x89/0xd5 [ 94.099355] [] ? sys_rt_sigprocmask+0x58/0xd7 [ 94.099355] [] system_call_after_swapgs+0x7b/0x80 [ 94.099355] [ 94.099355] ---[ end trace 901f35b4854e210a ]--- [ 94.946799] EXT3 FS on dm-0, internal journal [ 95.550587] kjournald starting. Commit interval 5 seconds [ 94.449670] EXT3 FS on sdb1, internal journal [ 94.449670] EXT3-fs: mounted filesystem with ordered data mode. [ 95.566478] kjournald starting. Commit interval 5 seconds [ 94.495752] usb 1-1.1.1: skipped 1 descriptor after endpoint [ 94.495752] EXT3 FS on sdc1, internal journal [ 94.495752] EXT3-fs: mounted filesystem with ordered data mode. [ 95.595455] kjournald starting. Commit interval 5 seconds [ 94.501190] EXT3 FS on sda2, internal journal [ 94.501190] EXT3-fs: mounted filesystem with ordered data mode. [ 94.508169] usb 1-1.1.1: default language 0x0409 [ 94.514198] NTFS volume version 3.1. [ 94.630236] usb 1-1.1.1: uevent [ 94.630236] usb 1-1.1.1: usb_probe_device [ 94.630236] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 94.630236] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0) [ 94.630236] usb 1-1.1.1:1.0: uevent [ 94.630236] usb-storage 1-1.1.1:1.0: usb_probe_interface [ 94.630236] usb-storage 1-1.1.1:1.0: usb_probe_interface - got id [ 94.630236] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 94.628437] scsi6 : SCSI emulation for USB Mass Storage devices [ 95.699435] usb-storage: device found at 11 [ 95.699435] usb-storage: waiting for device to settle before scanning [ 94.629437] drivers/usb/core/inode.c: creating file '011' [ 94.629437] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 94.629437] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 94.629437] usb 1-1.1.1: Product: Flash Card Reader [ 94.629437] usb 1-1.1.1: Manufacturer: Generic [ 94.629437] usb 1-1.1.1: SerialNumber: 071031504947 [ 94.634235] hub 1-1.1:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 94.648224] ISOFS: changing to secondary root [ 94.886635] hub 1-1.1:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 94.938007] Adding 506036k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:506036k [ 95.060952] usb 1-1.1.2: new low speed USB device using ehci_hcd and address 12 [ 95.425949] usb 1-1.1.2: skipped 1 descriptor after interface [ 95.430512] usb 1-1.1.2: default language 0x0409 [ 95.440942] usb 1-1.1.2: uevent [ 95.440942] usb 1-1.1.2: usb_probe_device [ 95.440942] usb 1-1.1.2: configuration #1 chosen from 1 choice [ 95.445955] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0) [ 95.445955] usb 1-1.1.2:1.0: uevent [ 95.445955] usbhid 1-1.1.2:1.0: usb_probe_interface [ 95.445955] usbhid 1-1.1.2:1.0: usb_probe_interface - got id [ 95.455952] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input3 [ 95.465965] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1.1.2 [ 95.465965] drivers/usb/core/inode.c: creating file '012' [ 95.465965] usb 1-1.1.2: New USB device found, idVendor=046d, idProduct=c044 [ 95.465965] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 95.465965] usb 1-1.1.2: Product: USB-PS/2 Optical Mouse [ 95.465965] usb 1-1.1.2: Manufacturer: Logitech [ 95.565946] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0004 [ 99.706865] usb-storage: device scan complete [ 99.721834] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 [ 99.936486] scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 [ 100.261053] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 100.261053] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 100.398980] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 100.398980] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 101.160567] usb 1-1.1.2: link qh1-0e01/ffff88007f800640 start 0 [1/2 us] [ 105.050962] tuner' 0-0043: Cmd VIDIOC_S_STD accepted for analog TV [ 105.050962] tuner' 0-0060: Cmd VIDIOC_S_STD accepted for analog TV [ 105.050962] tuner' 0-0060: tv freq set to 400.00 [ 105.055984] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 105.058991] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 105.063388] tuner' 0-0043: Cmd VIDIOC_S_STD accepted for analog TV [ 105.063388] tuner' 0-0060: Cmd VIDIOC_S_STD accepted for analog TV [ 105.063388] tuner' 0-0060: tv freq set to 400.00 [ 105.069398] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 105.072401] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 105.378032] hda: UDMA/66 mode selected [ 209.750505] Hangcheck: hangcheck value past margin!