[ 0.000000] Linux version 2.6.26 (simon@redrum) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #03414-g33af79d-dirty SMP PREEMPT 2008-07-19T05:24:39+0100 [ 0.000000] Command line: root=/dev/sdb1 ro init=/startup vga=0xf07 sysrq_always_enabled usbhid.mousepoll=1 tuner.debug=1 initcall_debug=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000480000000 (usable) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] last_pfn = 0x480000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffd0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffd0000 @ 8000-b000 [ 0.000000] last_map_addr: 7ffd0000 end: 7ffd0000 [ 0.000000] init_memory_mapping [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0100000000 - 0480000000 page 1G [ 0.000000] kernel direct mapping tables up to 480000000 @ a000-b000 [ 0.000000] last_map_addr: 480000000 end: 480000000 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F9680, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7FFD0100, 005C (r1 040208 XSDT1120 20080402 MSFT 97) [ 0.000000] ACPI: FACP 7FFD0290, 00F4 (r3 040208 FACP1120 20080402 MSFT 97) [ 0.000000] ACPI: DSDT 7FFD0470, 4D61 (r1 0AAAA 0AAAA000 0 INTL 20051117) [ 0.000000] ACPI: FACS 7FFDE000, 0040 [ 0.000000] ACPI: APIC 7FFD0390, 00A0 (r1 040208 APIC1120 20080402 MSFT 97) [ 0.000000] ACPI: MCFG 7FFD0430, 003C (r1 040208 OEMMCFG 20080402 MSFT 97) [ 0.000000] ACPI: OEMB 7FFDE040, 0091 (r1 040208 OEMB1120 20080402 MSFT 97) [ 0.000000] ACPI: SRAT 7FFD51E0, 0150 (r1 AMD HAMMER 1 AMD 1) [ 0.000000] ACPI: HPET 7FFD5330, 0038 (r1 040208 OEMHPET0 20080402 MSFT 97) [ 0.000000] ACPI: SSDT 7FFD5370, 143C (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 4 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 5 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 6 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 7 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] Entering add_active_range(0, 0x100, 0x7ffd0) 1 entries of 256 used [ 0.000000] SRAT: Node 0 PXM 0 100000000-280000000 [ 0.000000] Entering add_active_range(0, 0x100000, 0x280000) 2 entries of 256 used [ 0.000000] SRAT: Node 1 PXM 1 280000000-480000000 [ 0.000000] Entering add_active_range(1, 0x280000, 0x480000) 3 entries of 256 used [ 0.000000] NUMA: Allocated memnodemap from a000 - 13040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000280000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000002fff] [ 0.000000] bootmap [0000000000014000 - 0000000000063fff] pages 50 [ 0.000000] (6 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000983d08] TEXT DATA BSS ==> [0000200000 - 0000983d08] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #5 [000000a000 - 0000013040] MEMNODEMAP ==> [000000a000 - 0000013040] [ 0.000000] Bootmem setup node 1 0000000280000000-0000000480000000 [ 0.000000] NODE_DATA [0000000280000000 - 0000000280001fff] [ 0.000000] bootmap [0000000280002000 - 0000000280041fff] pages 40 [ 0.000000] (6 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 0000983d08] TEXT DATA BSS [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE [ 0.000000] #5 [000000a000 - 0000013040] MEMNODEMAP [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe20008bfffff] PMD -> [ffff880028200000-ffff88002f1fffff] on node 0 [ 0.000000] [ffffe20008c00000-ffffe2000fbfffff] PMD -> [ffff880280200000-ffff8802871fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00480000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffd0 [ 0.000000] 0: 0x00100000 -> 0x00280000 [ 0.000000] 1: 0x00280000 -> 0x00480000 [ 0.000000] On node 0 totalpages: 2097007 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2035 pages reserved [ 0.000000] DMA zone: 1908 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505864 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1551360 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 0 pages used for memmap [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 42752 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 2 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4127612 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sdb1 ro init=/startup vga=0xf07 sysrq_always_enabled usbhid.mousepoll=1 tuner.debug=1 initcall_debug=1 [ 0.000000] debug: sysrq always enabled. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 2200.092 MHz processor. [ 0.001999] spurious 8259A interrupt: IRQ7. [ 0.001999] Console: colour VGA+ 80x60 [ 0.001999] console [tty0] enabled [ 0.001999] Checking aperture... [ 0.001999] No AGP bridge found [ 0.001999] Node 0: aperture @ 80000000 size 1024 MB [ 0.001999] Node 1: aperture @ 80000000 size 1024 MB [ 0.001999] Memory: 16538500k/18874368k available (3947k kernel code, 238136k reserved, 1876k data, 320k init) [ 0.001999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.001999] hpet clockevent registered [ 0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4400.17 BogoMIPS (lpj=2200089) [ 0.003642] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.011807] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015518] Mount-cache hash table entries: 256 [ 0.015802] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.015910] CPU: L2 Cache: 512K (64 bytes/line) [ 0.015997] CPU 0/0 -> Node 0 [ 0.015997] tseg: 0000000000 [ 0.015997] CPU: Physical Processor ID: 0 [ 0.015997] CPU: Processor Core ID: 0 [ 0.015997] using C1E aware idle routine [ 0.015997] ACPI: Core revision 20080609 [ 0.036463] CPU0: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.036604] Using local APIC timer interrupts. [ 0.037994] APIC timer calibration result 12500530 [ 0.037994] Detected 12.500 MHz APIC timer. [ 0.037994] Booting processor 1/1 ip 6000 [ 0.047992] Initializing CPU#1 [ 0.108298] Calibrating delay using timer specific routine.. <6>4404.50 BogoMIPS (lpj=2202253) [ 0.108305] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.108307] CPU: L2 Cache: 512K (64 bytes/line) [ 0.108309] CPU 1/1 -> Node 0 [ 0.108311] CPU: Physical Processor ID: 0 [ 0.108312] CPU: Processor Core ID: 1 [ 0.108697] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.108983] CPU1: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.109983] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.111006] Booting processor 2/2 ip 6000 [ 0.121981] Initializing CPU#2 [ 0.182538] Calibrating delay using timer specific routine.. <6>4404.39 BogoMIPS (lpj=2202198) [ 0.182545] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.182547] CPU: L2 Cache: 512K (64 bytes/line) [ 0.182549] CPU 2/2 -> Node 0 [ 0.182551] CPU: Physical Processor ID: 0 [ 0.182552] CPU: Processor Core ID: 2 [ 0.182960] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.182972] CPU2: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.183971] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.185048] Booting processor 3/3 ip 6000 [ 0.195970] Initializing CPU#3 [ 0.256519] Calibrating delay using timer specific routine.. <6>4404.39 BogoMIPS (lpj=2202198) [ 0.256526] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.256527] CPU: L2 Cache: 512K (64 bytes/line) [ 0.256529] CPU 3/3 -> Node 0 [ 0.256531] CPU: Physical Processor ID: 0 [ 0.256532] CPU: Processor Core ID: 3 [ 0.256920] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.256960] CPU3: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.257960] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.259209] Booting processor 4/4 ip 6000 [ 0.270958] Initializing CPU#4 [ 0.331291] Calibrating delay using timer specific routine.. <6>4401.68 BogoMIPS (lpj=2200840) [ 0.331300] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.331301] CPU: L2 Cache: 512K (64 bytes/line) [ 0.331303] CPU 4/4 -> Node 1 [ 0.331306] CPU: Physical Processor ID: 1 [ 0.331307] CPU: Processor Core ID: 0 [ 0.331723] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.331949] CPU4: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.332923] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.333948] Booting processor 5/5 ip 6000 [ 0.343947] Initializing CPU#5 [ 0.404339] Calibrating delay using timer specific routine.. <6>4400.73 BogoMIPS (lpj=2200366) [ 0.404347] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.404349] CPU: L2 Cache: 512K (64 bytes/line) [ 0.404351] CPU 5/5 -> Node 1 [ 0.404353] CPU: Physical Processor ID: 1 [ 0.404354] CPU: Processor Core ID: 1 [ 0.404778] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.404938] CPU5: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.405937] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.406937] Booting processor 6/6 ip 6000 [ 0.416936] Initializing CPU#6 [ 0.477281] Calibrating delay using timer specific routine.. <6>4402.58 BogoMIPS (lpj=2201290) [ 0.477289] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.477291] CPU: L2 Cache: 512K (64 bytes/line) [ 0.477293] CPU 6/6 -> Node 1 [ 0.477295] CPU: Physical Processor ID: 1 [ 0.477296] CPU: Processor Core ID: 2 [ 0.477715] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.477926] CPU6: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.478926] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.479926] Booting processor 7/7 ip 6000 [ 0.489925] Initializing CPU#7 [ 0.550322] Calibrating delay using timer specific routine.. <6>4401.78 BogoMIPS (lpj=2200893) [ 0.550330] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.550332] CPU: L2 Cache: 512K (64 bytes/line) [ 0.550334] CPU 7/7 -> Node 1 [ 0.550336] CPU: Physical Processor ID: 1 [ 0.550337] CPU: Processor Core ID: 3 [ 0.550761] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.550923] CPU7: Quad-Core AMD Opteron(tm) Processor 2354 stepping 03 [ 0.551902] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.552923] Brought up 8 CPUs [ 0.552923] Total of 8 processors activated (35220.25 BogoMIPS). [ 0.552923] calling init_cpufreq_transition_notifier_list+0x0/0x1b [ 0.552923] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs [ 0.553035] calling net_ns_init+0x0/0x182 [ 0.553137] net_namespace: 1224 bytes [ 0.553243] initcall net_ns_init+0x0/0x182 returned 0 after 0 msecs [ 0.553365] calling cpufreq_tsc+0x0/0x16 [ 0.553465] initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs [ 0.553587] calling init_smp_flush+0x0/0x4a [ 0.553687] initcall init_smp_flush+0x0/0x4a returned 0 after 0 msecs [ 0.553811] calling sysctl_init+0x0/0x32 [ 0.554059] initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs [ 0.554200] calling ksysfs_init+0x0/0xbb [ 0.554318] initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs [ 0.554459] calling init_jiffies_clocksource+0x0/0x12 [ 0.554574] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs [ 0.554798] calling pm_init+0x0/0x34 [ 0.554922] initcall pm_init+0x0/0x34 returned 0 after 0 msecs [ 0.555050] calling filelock_init+0x0/0x2e [ 0.555184] initcall filelock_init+0x0/0x2e returned 0 after 0 msecs [ 0.555326] calling init_script_binfmt+0x0/0x12 [ 0.555439] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.555566] calling init_elf_binfmt+0x0/0x12 [ 0.555679] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.555806] calling init_compat_elf_binfmt+0x0/0x12 [ 0.555919] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.556061] calling debugfs_init+0x0/0x51 [ 0.556165] initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs [ 0.556297] calling calibrate_xor_blocks+0x0/0xa7 [ 0.556397] xor: automatically using best checksumming function: generic_sse [ 0.561003] generic_sse: 8532.000 MB/sec [ 0.561099] xor: using function: generic_sse (8532.000 MB/sec) [ 0.561217] initcall calibrate_xor_blocks+0x0/0xa7 returned 0 after 4 msecs [ 0.561326] calling random32_init+0x0/0x5b [ 0.561444] initcall random32_init+0x0/0x5b returned 0 after 0 msecs [ 0.561562] calling cpufreq_core_init+0x0/0x7f [ 0.561674] initcall cpufreq_core_init+0x0/0x7f returned 0 after 0 msecs [ 0.561786] calling sock_init+0x0/0x5e [ 0.561923] initcall sock_init+0x0/0x5e returned 0 after 0 msecs [ 0.562051] calling netlink_proto_init+0x0/0x14e [ 0.562157] NET: Registered protocol family 16 [ 0.562264] initcall netlink_proto_init+0x0/0x14e returned 0 after 0 msecs [ 0.562394] calling bdi_class_init+0x0/0x3d [ 0.562541] initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs [ 0.562661] calling kobject_uevent_init+0x0/0x45 [ 0.562769] initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs [ 0.562885] calling pcibus_class_init+0x0/0x12 [ 0.563054] initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs [ 0.563209] calling pci_driver_init+0x0/0x12 [ 0.563372] initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs [ 0.563513] calling backlight_class_init+0x0/0x49 [ 0.563673] initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs [ 0.563807] calling video_output_class_init+0x0/0x12 [ 0.563958] initcall video_output_class_init+0x0/0x12 returned 0 after 0 msecs [ 0.564174] calling dock_init+0x0/0x5a [ 0.564347] No dock devices found. [ 0.564455] initcall dock_init+0x0/0x5a returned 0 after 0 msecs [ 0.564576] calling tty_class_init+0x0/0x2a [ 0.564723] initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs [ 0.564843] calling vtconsole_class_init+0x0/0xba [ 0.565001] initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs [ 0.565127] calling register_node_type+0x0/0x6b [ 0.565273] initcall register_node_type+0x0/0x6b returned 0 after 0 msecs [ 0.565394] calling enable_pci_io_ecs+0x0/0x2e [ 0.565513] initcall enable_pci_io_ecs+0x0/0x2e returned 0 after 0 msecs [ 0.565655] calling early_fill_mp_bus_info+0x0/0x7e5 [ 0.565764] node 0 link 0: io port [1000, ffffff] [ 0.565767] TOM: 0000000080000000 aka 2048M [ 0.565872] Fam 10h mmconf [e0000000, e00fffff] [ 0.565874] node 0 link 0: mmio [e0000000, efffffff] ==> [e0100000, efffffff] [ 0.565878] node 0 link 0: mmio [f0000000, fec0ffff] [ 0.565881] node 0 link 0: mmio [a0000, bffff] [ 0.565883] node 0 link 0: mmio [80000000, dfffffff] [ 0.565885] TOM2: 0000000480000000 aka 18432M [ 0.565995] bus: [00,07] on node 0 link 0 [ 0.565996] bus: 00 index 0 io port: [0, ffff] [ 0.565998] bus: 00 index 1 mmio: [e0100000, ffffffff] [ 0.566000] bus: 00 index 2 mmio: [a0000, bffff] [ 0.566007] bus: 00 index 3 mmio: [80000000, dfffffff] [ 0.566009] bus: 00 index 4 mmio: [480000000, fcffffffff] [ 0.566011] initcall early_fill_mp_bus_info+0x0/0x7e5 returned 0 after 0 msecs [ 0.566204] calling arch_kdebugfs_init+0x0/0x8 [ 0.566309] initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs [ 0.566429] calling mtrr_if_init+0x0/0x77 [ 0.566532] initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs [ 0.566657] calling ffh_cstate_init+0x0/0x31 [ 0.566762] initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs [ 0.566877] initcall ffh_cstate_init+0x0/0x31 returned with error code -1 [ 0.567001] calling acpi_pci_init+0x0/0x40 [ 0.567101] ACPI: bus type pci registered [ 0.567202] initcall acpi_pci_init+0x0/0x40 returned 0 after 0 msecs [ 0.567324] calling init_acpi_device_notify+0x0/0x4b [ 0.567425] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs [ 0.567624] calling dmi_id_init+0x0/0x2e9 [ 0.567814] initcall dmi_id_init+0x0/0x2e9 returned 0 after 0 msecs [ 0.567934] calling pci_arch_init+0x0/0x4e [ 0.568065] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.568185] PCI: MCFG area at e0000000 reserved in E820 [ 0.573327] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.573435] PCI: Using configuration type 1 for base access [ 0.573547] initcall pci_arch_init+0x0/0x4e returned 0 after 4 msecs [ 0.573680] calling topology_init+0x0/0x7c [ 0.574189] initcall topology_init+0x0/0x7c returned 0 after 0 msecs [ 0.574340] calling mtrr_init_finialize+0x0/0x3d [ 0.575923] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 msecs [ 0.575923] calling param_sysfs_init+0x0/0x1e7 [ 0.579301] initcall param_sysfs_init+0x0/0x1e7 returned 0 after 3 msecs [ 0.579423] calling pm_sysrq_init+0x0/0x19 [ 0.579532] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs [ 0.579671] calling readahead_init+0x0/0x38 [ 0.579833] initcall readahead_init+0x0/0x38 returned 0 after 0 msecs [ 0.579958] calling init_bio+0x0/0xc5 [ 0.580192] initcall init_bio+0x0/0xc5 returned 0 after 0 msecs [ 0.580320] calling blk_settings_init+0x0/0x2a [ 0.580421] initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs [ 0.580537] calling blk_ioc_init+0x0/0x2a [ 0.580655] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs [ 0.580784] calling genhd_device_init+0x0/0x55 [ 0.581115] initcall genhd_device_init+0x0/0x55 returned 0 after 0 msecs [ 0.581251] calling pci_slot_init+0x0/0x45 [ 0.581364] initcall pci_slot_init+0x0/0x45 returned 0 after 0 msecs [ 0.581508] calling fbmem_init+0x0/0x8a [ 0.581667] initcall fbmem_init+0x0/0x8a returned 0 after 0 msecs [ 0.581792] calling acpi_init+0x0/0x221 [ 0.582690] ACPI: EC: Look up EC in DSDT [ 0.599102] ACPI: Interpreter enabled [ 0.599217] ACPI: (supports S0 S5) [ 0.599380] ACPI: Using IOAPIC for interrupt routing [ 0.599558] initcall acpi_init+0x0/0x221 returned 0 after 17 msecs [ 0.599687] calling acpi_scan_init+0x0/0x11e [ 0.612031] initcall acpi_scan_init+0x0/0x11e returned 0 after 12 msecs [ 0.612161] calling acpi_ec_init+0x0/0x61 [ 0.612342] initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs [ 0.612471] calling acpi_pci_root_init+0x0/0x28 [ 0.612653] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.613064] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.613177] pci 0000:00:01.1: PME# disabled [ 0.613322] pci 0000:00:02.0: supports D1 [ 0.613324] pci 0000:00:02.0: supports D2 [ 0.613325] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.613437] pci 0000:00:02.0: PME# disabled [ 0.613570] pci 0000:00:02.1: supports D1 [ 0.613571] pci 0000:00:02.1: supports D2 [ 0.613583] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.613694] pci 0000:00:02.1: PME# disabled [ 0.614045] pci 0000:00:08.0: supports D1 [ 0.614047] pci 0000:00:08.0: supports D2 [ 0.614048] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614149] pci 0000:00:08.0: PME# disabled [ 0.614298] pci 0000:00:09.0: supports D1 [ 0.614299] pci 0000:00:09.0: supports D2 [ 0.614310] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614422] pci 0000:00:09.0: PME# disabled [ 0.614556] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614662] pci 0000:00:0a.0: PME# disabled [ 0.614797] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.614905] pci 0000:00:0d.0: PME# disabled [ 0.615036] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.615130] pci 0000:00:0e.0: PME# disabled [ 0.615252] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.615351] pci 0000:00:0f.0: PME# disabled [ 0.615799] pci 0000:01:06.0: supports D1 [ 0.615800] pci 0000:01:06.0: supports D2 [ 0.615878] pci 0000:01:07.0: supports D1 [ 0.615879] pci 0000:01:07.0: supports D2 [ 0.615909] pci 0000:00:06.0: transparent bridge [ 0.616118] pci 0000:03:00.0: supports D1 [ 0.616120] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.616229] pci 0000:03:00.0: PME# disabled [ 0.616401] pci 0000:03:00.1: supports D1 [ 0.616403] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.616525] pci 0000:03:00.1: PME# disabled [ 0.616885] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.617006] pci 0000:04:00.0: PME# disabled [ 0.617168] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.617271] pci 0000:04:00.1: PME# disabled [ 0.617474] pci 0000:05:00.0: supports D1 [ 0.617476] pci 0000:05:00.0: supports D2 [ 0.617614] pci 0000:07:00.0: supports D1 [ 0.617615] pci 0000:07:00.0: supports D2 [ 0.617671] pci 0000:07:00.1: supports D1 [ 0.617681] pci 0000:07:00.1: supports D2 [ 0.617809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.618342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.618533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.618685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.618833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.618999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] [ 0.634146] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 20 msecs [ 0.634269] calling acpi_pci_link_init+0x0/0x48 [ 0.634651] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 0.635157] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.635634] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 [ 0.636090] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.636544] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *7 [ 0.636996] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.637477] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 [ 0.637923] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 [ 0.638406] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.638840] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5 [ 0.639315] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.639781] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.640242] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.640695] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 0.641149] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.641633] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.642108] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 0.642566] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.643039] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 0.643324] initcall acpi_pci_link_init+0x0/0x48 returned 0 after 8 msecs [ 0.643455] calling acpi_power_init+0x0/0x77 [ 0.643631] initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs [ 0.643746] calling acpi_system_init+0x0/0x1b0 [ 0.643923] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F3, should be F0 [20080609] [ 0.644217] initcall acpi_system_init+0x0/0x1b0 returned 0 after 0 msecs [ 0.644348] calling pnp_init+0x0/0x20 [ 0.644447] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.644594] initcall pnp_init+0x0/0x20 returned 0 after 0 msecs [ 0.644723] calling pnpacpi_init+0x0/0x8c [ 0.644829] pnp: PnP ACPI init [ 0.644942] ACPI: bus type pnp registered [ 0.651275] pnp: PnP ACPI: found 15 devices [ 0.651391] ACPI: ACPI bus type pnp unregistered [ 0.651500] initcall pnpacpi_init+0x0/0x8c returned 0 after 6 msecs [ 0.651621] calling misc_init+0x0/0x98 [ 0.651778] initcall misc_init+0x0/0x98 returned 0 after 0 msecs [ 0.651899] calling init_dvbdev+0x0/0xb9 [ 0.652051] initcall init_dvbdev+0x0/0xb9 returned 0 after 0 msecs [ 0.652163] calling init_scsi+0x0/0x7c [ 0.652531] SCSI subsystem initialized [ 0.652621] initcall init_scsi+0x0/0x7c returned 0 after 0 msecs [ 0.652746] calling ata_init+0x0/0x31f [ 0.653040] libata version 3.00 loaded. [ 0.653042] initcall ata_init+0x0/0x31f returned 0 after 0 msecs [ 0.653186] calling usb_init+0x0/0x122 [ 0.653467] usbcore: registered new interface driver usbfs [ 0.653640] usbcore: registered new interface driver hub [ 0.653823] usbcore: registered new device driver usb [ 0.653923] initcall usb_init+0x0/0x122 returned 0 after 0 msecs [ 0.654084] calling serio_init+0x0/0x89 [ 0.654253] initcall serio_init+0x0/0x89 returned 0 after 0 msecs [ 0.654373] calling input_init+0x0/0x107 [ 0.654524] initcall input_init+0x0/0x107 returned 0 after 0 msecs [ 0.654632] calling i2c_init+0x0/0x5f [ 0.654855] initcall i2c_init+0x0/0x5f returned 0 after 0 msecs [ 0.654975] calling power_supply_class_init+0x0/0x34 [ 0.655115] initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs [ 0.655321] calling hwmon_init+0x0/0x3b [ 0.655468] initcall hwmon_init+0x0/0x3b returned 0 after 0 msecs [ 0.655586] calling thermal_init+0x0/0x39 [ 0.655725] initcall thermal_init+0x0/0x39 returned 0 after 0 msecs [ 0.655853] calling md_init+0x0/0xd0 [ 0.655977] initcall md_init+0x0/0xd0 returned 0 after 0 msecs [ 0.656095] calling pci_subsys_init+0x0/0x12c [ 0.656199] PCI: Using ACPI for IRQ routing [ 0.656390] initcall pci_subsys_init+0x0/0x12c returned 0 after 0 msecs [ 0.656529] calling proto_init+0x0/0x2e [ 0.656635] initcall proto_init+0x0/0x2e returned 0 after 0 msecs [ 0.656751] calling net_dev_init+0x0/0x150 [ 0.656918] initcall net_dev_init+0x0/0x150 returned 0 after 0 msecs [ 0.657037] calling neigh_init+0x0/0x71 [ 0.657154] initcall neigh_init+0x0/0x71 returned 0 after 0 msecs [ 0.657273] calling fib_rules_init+0x0/0xa6 [ 0.657392] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs [ 0.657512] calling pktsched_init+0x0/0xc4 [ 0.657640] initcall pktsched_init+0x0/0xc4 returned 0 after 0 msecs [ 0.657769] calling tc_filter_init+0x0/0x4c [ 0.657884] initcall tc_filter_init+0x0/0x4c returned 0 after 0 msecs [ 0.658018] calling tc_action_init+0x0/0x4c [ 0.658112] initcall tc_action_init+0x0/0x4c returned 0 after 0 msecs [ 0.658234] calling genl_init+0x0/0xd9 [ 0.662973] initcall genl_init+0x0/0xd9 returned 0 after 4 msecs [ 0.663088] calling sysctl_init+0x0/0x2d [ 0.663197] initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs [ 0.663326] calling pci_iommu_init+0x0/0x17 [ 0.664923] DMAR:parse DMAR table failure. [ 0.664923] PCI-DMA: Disabling AGP. [ 0.792923] PCI-DMA: aperture base @ 80000000 size 1048576 KB [ 0.792923] init_memory_mapping [ 0.793033] 0080000000 - 00c0000000 page 1G [ 0.793036] last_map_addr: c0000000 end: c0000000 [ 0.793139] PCI-DMA: using GART IOMMU. [ 0.793257] PCI-DMA: Reserving 1024MB of IOMMU area in the AGP aperture [ 0.826923] initcall pci_iommu_init+0x0/0x17 returned 0 after 154 msecs [ 0.826923] calling hpet_late_init+0x0/0x114 [ 0.826923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.826923] hpet0: 3 32-bit timers, 25000000 Hz [ 0.827923] initcall hpet_late_init+0x0/0x114 returned 0 after 0 msecs [ 0.827923] calling clocksource_done_booting+0x0/0x12 [ 0.827923] initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs [ 0.827443] Switched to high resolution mode on CPU 5 [ 0.828071] Switched to high resolution mode on CPU 0 [ 0.828079] calling init_pipe_fs+0x0/0x4c [ 0.828323] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs [ 0.828444] calling init_mnt_writers+0x0/0x50 [ 0.828558] initcall init_mnt_writers+0x0/0x50 returned 0 after 0 msecs [ 0.828679] calling eventpoll_init+0x0/0x85 [ 0.828836] initcall eventpoll_init+0x0/0x85 returned 0 after 0 msecs [ 0.828956] calling anon_inode_init+0x0/0x115 [ 0.828424] Switched to high resolution mode on CPU 1 [ 0.828441] Switched to high resolution mode on CPU 2 [ 0.828482] Switched to high resolution mode on CPU 3 [ 0.829058] initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs [ 0.828445] Switched to high resolution mode on CPU 4 [ 0.828459] Switched to high resolution mode on CPU 6 [ 0.828425] Switched to high resolution mode on CPU 7 [ 0.829058] calling pcie_aspm_init+0x0/0x22 [ 0.832343] initcall pcie_aspm_init+0x0/0x22 returned 0 after 3 msecs [ 0.832475] calling acpi_event_init+0x0/0x52 [ 0.836121] initcall acpi_event_init+0x0/0x52 returned 0 after 3 msecs [ 0.836254] calling pnp_system_init+0x0/0x12 [ 0.836388] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.836497] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.836606] system 00:07: ioport range 0x2000-0x207f has been reserved [ 0.836715] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 0.836823] system 00:07: ioport range 0x2400-0x247f has been reserved [ 0.836931] system 00:07: ioport range 0x2480-0x24ff has been reserved [ 0.837016] system 00:07: ioport range 0x2800-0x287f has been reserved [ 0.837128] system 00:07: ioport range 0x2880-0x28ff has been reserved [ 0.837238] system 00:07: ioport range 0x2c00-0x2c7f has been reserved [ 0.837347] system 00:07: ioport range 0x2c80-0x2cff has been reserved [ 0.837456] system 00:07: iomem range 0xfdf80000-0xfdfbffff has been reserved [ 0.837567] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved [ 0.837760] system 00:09: ioport range 0xca0-0xcaf has been reserved [ 0.837862] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.838053] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.838255] system 00:0c: ioport range 0xa00-0xa7f has been reserved [ 0.838371] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.838569] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.838679] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.838788] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.838891] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 0.839095] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.839347] initcall pnp_system_init+0x0/0x12 returned 0 after 2 msecs [ 0.839479] calling chr_dev_init+0x0/0x98 [ 0.839979] initcall chr_dev_init+0x0/0x98 returned 0 after 0 msecs [ 0.840033] calling firmware_class_init+0x0/0x72 [ 0.840182] initcall firmware_class_init+0x0/0x72 returned 0 after 0 msecs [ 0.840313] calling loopback_init+0x0/0x12 [ 0.840502] initcall loopback_init+0x0/0x12 returned 0 after 0 msecs [ 0.840634] calling cpufreq_gov_performance_init+0x0/0x12 [ 0.840748] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs [ 0.840960] calling init_acpi_pm_clocksource+0x0/0xae [ 0.841075] initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs [ 0.841292] calling pcibios_assign_resources+0x0/0x87 [ 0.841468] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.841578] pci 0000:00:06.0: IO window: 0xc000-0xcfff [ 0.841693] pci 0000:00:06.0: MEM window: 0xfe800000-0xfe8fffff [ 0.841801] pci 0000:00:06.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff [ 0.841995] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.842095] pci 0000:00:0a.0: IO window: disabled [ 0.842202] pci 0000:00:0a.0: MEM window: disabled [ 0.842328] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.842437] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.842539] pci 0000:03:00.0: IO window: 0xd000-0xdfff [ 0.842648] pci 0000:03:00.0: MEM window: 0xfe900000-0xfe9fffff [ 0.842757] pci 0000:03:00.0: PREFETCH window: disabled [ 0.842877] pci 0000:03:00.1: PCI bridge, secondary bus 0000:05 [ 0.842974] pci 0000:03:00.1: IO window: disabled [ 0.843100] pci 0000:03:00.1: MEM window: 0xfea00000-0xfeafffff [ 0.843204] pci 0000:03:00.1: PREFETCH window: disabled [ 0.843317] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 [ 0.843415] pci 0000:00:0d.0: IO window: 0xd000-0xdfff [ 0.843523] pci 0000:00:0d.0: MEM window: 0xfe900000-0xfeafffff [ 0.843621] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.843739] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06 [ 0.843836] pci 0000:00:0e.0: IO window: disabled [ 0.843944] pci 0000:00:0e.0: MEM window: disabled [ 0.844057] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.844166] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07 [ 0.844264] pci 0000:00:0f.0: IO window: 0xe000-0xefff [ 0.844373] pci 0000:00:0f.0: MEM window: 0xfeb00000-0xfebfffff [ 0.844482] pci 0000:00:0f.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.844687] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.844692] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.844696] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.844704] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 0.844712] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 0.844719] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.844724] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.844727] initcall pcibios_assign_resources+0x0/0x87 returned 0 after 3 msecs [ 0.844940] calling inet_init+0x0/0x428 [ 0.845155] NET: Registered protocol family 2 [ 0.856631] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.859700] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.863574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.864114] TCP: Hash tables configured (established 524288 bind 65536) [ 0.864225] TCP reno registered [ 0.867161] initcall inet_init+0x0/0x428 returned 0 after 21 msecs [ 0.867310] calling af_unix_init+0x0/0x55 [ 0.867436] NET: Registered protocol family 1 [ 0.867556] initcall af_unix_init+0x0/0x55 returned 0 after 0 msecs [ 0.867688] calling default_rootfs+0x0/0x6b [ 0.867823] initcall default_rootfs+0x0/0x6b returned 0 after 0 msecs [ 0.867955] calling i8259A_init_sysfs+0x0/0x22 [ 0.868166] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs [ 0.868308] calling vsyscall_init+0x0/0x6c [ 0.868447] initcall vsyscall_init+0x0/0x6c returned 0 after 0 msecs [ 0.868587] calling sbf_init+0x0/0xd7 [ 0.868693] initcall sbf_init+0x0/0xd7 returned 0 after 0 msecs [ 0.868823] calling i8237A_init_sysfs+0x0/0x22 [ 0.869020] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs [ 0.869151] calling add_rtc_cmos+0x0/0x1d [ 0.869258] initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs [ 0.869388] calling cache_sysfs_init+0x0/0x5d [ 0.885583] initcall cache_sysfs_init+0x0/0x5d returned 0 after 1 msecs [ 0.885583] calling mce_init_device+0x0/0x85 [ 0.885583] initcall mce_init_device+0x0/0x85 returned 0 after 0 msecs [ 0.885583] calling periodic_mcheck_init+0x0/0x3f [ 0.885583] initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs [ 0.885583] calling thermal_throttle_init_device+0x0/0x83 [ 0.885583] initcall thermal_throttle_init_device+0x0/0x83 returned 0 after 0 msecs [ 0.885583] calling threshold_init_device+0x0/0x49 [ 0.884910] initcall threshold_init_device+0x0/0x49 returned 0 after 0 msecs [ 0.884910] calling msr_init+0x0/0xf2 [ 0.884910] initcall msr_init+0x0/0xf2 returned 0 after 0 msecs [ 0.884910] calling cpuid_init+0x0/0xf2 [ 0.884910] initcall cpuid_init+0x0/0xf2 returned 0 after 0 msecs [ 0.884910] calling init_lapic_sysfs+0x0/0x2d [ 0.884910] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs [ 0.884910] calling ioapic_init_sysfs+0x0/0x99 [ 0.884910] initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs [ 0.884910] calling add_pcspkr+0x0/0x43 [ 0.884910] initcall add_pcspkr+0x0/0x43 returned 0 after 0 msecs [ 0.884910] calling uv_ptc_init+0x0/0x75 [ 0.884910] initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs [ 0.884910] calling uv_bau_init+0x0/0x5a1 [ 0.884910] initcall uv_bau_init+0x0/0x5a1 returned 0 after 0 msecs [ 0.884910] calling aes_init+0x0/0x12 [ 0.884910] initcall aes_init+0x0/0x12 returned 0 after 0 msecs [ 0.884910] calling init+0x0/0x12 [ 0.884910] initcall init+0x0/0x12 returned 0 after 0 msecs [ 0.884910] calling init_vdso_vars+0x0/0x1e7 [ 0.884910] initcall init_vdso_vars+0x0/0x1e7 returned 0 after 0 msecs [ 0.884910] calling ia32_binfmt_init+0x0/0x14 [ 0.885046] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs [ 0.885046] calling sysenter_setup+0x0/0x2b6 [ 0.885046] initcall sysenter_setup+0x0/0x2b6 returned 0 after 0 msecs [ 0.885046] calling create_proc_profile+0x0/0x2c7 [ 0.885046] initcall create_proc_profile+0x0/0x2c7 returned 0 after 0 msecs [ 0.885046] calling ioresources_init+0x0/0x3c [ 0.885046] initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs [ 0.885049] calling uid_cache_init+0x0/0x6e [ 0.885203] initcall uid_cache_init+0x0/0x6e returned 0 after 0 msecs [ 0.885358] calling init_posix_timers+0x0/0xb6 [ 0.885503] initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs [ 0.885637] calling init_posix_cpu_timers+0x0/0xd4 [ 0.885757] initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs [ 0.885904] calling nsproxy_cache_init+0x0/0x2d [ 0.886045] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs [ 0.886177] calling timekeeping_init_device+0x0/0x22 [ 0.886278] initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs [ 0.886278] calling init_clocksource_sysfs+0x0/0x50 [ 0.886351] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs [ 0.886499] calling init_timer_list_procfs+0x0/0x2c [ 0.886645] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs [ 0.886781] calling init_tstats_procfs+0x0/0x2c [ 0.886910] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs [ 0.887055] calling futex_init+0x0/0x63 [ 0.887187] initcall futex_init+0x0/0x63 returned 0 after 0 msecs [ 0.887322] calling proc_dma_init+0x0/0x22 [ 0.887337] initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs [ 0.887356] calling percpu_modinit+0x0/0x6e [ 0.887483] initcall percpu_modinit+0x0/0x6e returned 0 after 0 msecs [ 0.887626] calling kallsyms_init+0x0/0x25 [ 0.887745] initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs [ 0.887880] calling ikconfig_init+0x0/0x39 [ 0.888008] initcall ikconfig_init+0x0/0x39 returned 0 after 0 msecs [ 0.888143] calling init_kprobes+0x0/0x103 [ 0.890910] initcall init_kprobes+0x0/0x103 returned 0 after 2 msecs [ 0.891034] calling relay_init+0x0/0x14 [ 0.891162] initcall relay_init+0x0/0x14 returned 0 after 0 msecs [ 0.891299] calling utsname_sysctl_init+0x0/0x14 [ 0.891435] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 0.891571] calling init_per_zone_pages_min+0x0/0x53 [ 0.892912] initcall init_per_zone_pages_min+0x0/0x53 returned 0 after 1 msecs [ 0.893147] calling pdflush_init+0x0/0x1d [ 0.893348] initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs [ 0.893481] calling kswapd_init+0x0/0x63 [ 0.893677] initcall kswapd_init+0x0/0x63 returned 0 after 0 msecs [ 0.893827] calling setup_vmstat+0x0/0x4a [ 0.893957] initcall setup_vmstat+0x0/0x4a returned 0 after 0 msecs [ 0.894092] calling procswaps_init+0x0/0x22 [ 0.894213] initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs [ 0.894354] calling hugetlb_init+0x0/0xaa [ 0.894473] Total HugeTLB memory allocated, 0 [ 0.894587] initcall hugetlb_init+0x0/0xaa returned 0 after 0 msecs [ 0.894719] calling init_tmpfs+0x0/0xda [ 0.894889] initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs [ 0.895013] calling cpucache_init+0x0/0x39 [ 0.895158] initcall cpucache_init+0x0/0x39 returned 0 after 0 msecs [ 0.895309] calling fasync_init+0x0/0x2a [ 0.895446] initcall fasync_init+0x0/0x2a returned 0 after 0 msecs [ 0.895590] calling aio_setup+0x0/0x6e [ 0.895940] initcall aio_setup+0x0/0x6e returned 0 after 0 msecs [ 0.896086] calling inotify_setup+0x0/0x12 [ 0.896213] initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs [ 0.896361] calling inotify_user_setup+0x0/0xb8 [ 0.896529] initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs [ 0.896664] calling init_sys32_ioctl+0x0/0x83 [ 0.896799] initcall init_sys32_ioctl+0x0/0x83 returned 0 after 0 msecs [ 0.896933] calling init_mbcache+0x0/0x14 [ 0.897060] initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs [ 0.897193] calling dnotify_init+0x0/0x2a [ 0.897331] initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs [ 0.897472] calling init_devpts_fs+0x0/0x3f [ 0.897607] initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs [ 0.897741] calling init_ext3_fs+0x0/0x6a [ 0.897906] initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs [ 0.898041] calling journal_init+0x0/0x99 [ 0.898241] initcall journal_init+0x0/0x99 returned 0 after 0 msecs [ 0.898387] calling init_ext2_fs+0x0/0x6a [ 0.898546] initcall init_ext2_fs+0x0/0x6a returned 0 after 0 msecs [ 0.898679] calling init_ramfs_fs+0x0/0x12 [ 0.898798] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs [ 0.898922] calling init_hugetlbfs_fs+0x0/0x98 [ 0.899085] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs [ 0.899210] calling init_fat_fs+0x0/0x4f [ 0.899377] initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs [ 0.899502] calling init_msdos_fs+0x0/0x12 [ 0.899630] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs [ 0.899755] calling init_vfat_fs+0x0/0x12 [ 0.899883] initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs [ 0.900007] calling init_iso9660_fs+0x0/0x5a [ 0.900153] initcall init_iso9660_fs+0x0/0x5a returned 0 after 0 msecs [ 0.900276] calling init_nls_utf8+0x0/0x25 [ 0.900407] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs [ 0.900541] calling init_ntfs_fs+0x0/0x1d1 [ 0.900677] NTFS driver 2.1.29 [Flags: R/O]. [ 0.900875] initcall init_ntfs_fs+0x0/0x1d1 returned 0 after 0 msecs [ 0.901020] calling init_autofs4_fs+0x0/0x12 [ 0.901141] initcall init_autofs4_fs+0x0/0x12 returned 0 after 0 msecs [ 0.901275] calling init_udf_fs+0x0/0x5b [ 0.901413] initcall init_udf_fs+0x0/0x5b returned 0 after 0 msecs [ 0.901548] calling ipc_init+0x0/0x23 [ 0.901669] msgmni has been set to 32301 [ 0.901791] initcall ipc_init+0x0/0x23 returned 0 after 0 msecs [ 0.901925] calling ipc_sysctl_init+0x0/0x14 [ 0.902070] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 0.902195] calling init_mqueue_fs+0x0/0xc6 [ 0.902382] initcall init_mqueue_fs+0x0/0xc6 returned 0 after 0 msecs [ 0.902506] calling crypto_algapi_init+0x0/0xd [ 0.902636] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs [ 0.902760] calling blkcipher_module_init+0x0/0x2a [ 0.902897] initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs [ 0.903031] calling cryptomgr_init+0x0/0x12 [ 0.903149] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs [ 0.903294] calling hmac_module_init+0x0/0x12 [ 0.903419] initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs [ 0.903553] calling md5_mod_init+0x0/0x12 [ 0.903671] initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.903814] calling rmd128_mod_init+0x0/0x12 [ 0.903933] initcall rmd128_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904066] calling rmd160_mod_init+0x0/0x12 [ 0.904185] initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904329] calling rmd256_mod_init+0x0/0x12 [ 0.904451] initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904586] calling rmd320_mod_init+0x0/0x12 [ 0.904705] initcall rmd320_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.904838] calling sha1_generic_mod_init+0x0/0x12 [ 0.904958] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.905101] calling sha256_generic_mod_init+0x0/0x3f [ 0.905222] initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 0.911515] calling sha512_generic_mod_init+0x0/0x3f [ 0.911635] initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 0.911850] calling crypto_cbc_module_init+0x0/0x12 [ 0.911981] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs [ 0.912115] calling blowfish_mod_init+0x0/0x12 [ 0.912235] initcall blowfish_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.912373] calling aes_init+0x0/0x323 [ 0.912506] initcall aes_init+0x0/0x323 returned 0 after 0 msecs [ 0.912640] calling lzo_mod_init+0x0/0x12 [ 0.912767] initcall lzo_mod_init+0x0/0x12 returned 0 after 0 msecs [ 0.912890] calling async_tx_init+0x0/0x16 [ 0.913018] async_tx: api initialized (sync-only) [ 0.913139] initcall async_tx_init+0x0/0x16 returned 0 after 0 msecs [ 0.913262] calling async_memcpy_init+0x0/0x8 [ 0.913393] initcall async_memcpy_init+0x0/0x8 returned 0 after 0 msecs [ 0.913519] calling async_xor_init+0x0/0x8 [ 0.913637] initcall async_xor_init+0x0/0x8 returned 0 after 0 msecs [ 0.913784] calling noop_init+0x0/0x14 [ 0.913903] io scheduler noop registered [ 0.914022] initcall noop_init+0x0/0x14 returned 0 after 0 msecs [ 0.914155] calling deadline_init+0x0/0x14 [ 0.914273] io scheduler deadline registered [ 0.914395] initcall deadline_init+0x0/0x14 returned 0 after 0 msecs [ 0.914528] calling cfq_init+0x0/0x9d [ 0.914681] io scheduler cfq registered (default) [ 0.914802] initcall cfq_init+0x0/0x9d returned 0 after 0 msecs [ 0.914935] calling percpu_counter_startup+0x0/0x14 [ 0.915055] initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs [ 0.915200] calling pci_init+0x0/0x35 [ 0.915366] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.957964] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.958116] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.958265] pci 0000:00:05.2: Enabling HT MSI Mapping [ 0.958414] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.958567] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.958714] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.958856] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.958856] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.958856] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.958856] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.958856] pci 0000:07:00.0: Boot video device [ 0.958856] initcall pci_init+0x0/0x35 returned 0 after 22 msecs [ 0.958856] calling pci_proc_init+0x0/0x6a [ 0.958856] initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs [ 0.958856] calling pcie_portdrv_init+0x0/0x4d [ 0.939618] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.939640] pcieport-driver 0000:00:0a.0: found MSI capability [ 0.939766] pci_express 0000:00:0a.0:pcie00: allocate port service [ 0.939823] pci_express 0000:00:0a.0:pcie01: allocate port service [ 0.939864] pci_express 0000:00:0a.0:pcie03: allocate port service [ 0.939971] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.940001] pcieport-driver 0000:00:0d.0: found MSI capability [ 0.940123] pci_express 0000:00:0d.0:pcie00: allocate port service [ 0.940164] pci_express 0000:00:0d.0:pcie01: allocate port service [ 0.940206] pci_express 0000:00:0d.0:pcie03: allocate port service [ 0.940300] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.940326] pcieport-driver 0000:00:0e.0: found MSI capability [ 0.940489] pci_express 0000:00:0e.0:pcie00: allocate port service [ 0.940530] pci_express 0000:00:0e.0:pcie01: allocate port service [ 0.940569] pci_express 0000:00:0e.0:pcie03: allocate port service [ 0.940660] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 0.940685] pcieport-driver 0000:00:0f.0: found MSI capability [ 0.940818] pci_express 0000:00:0f.0:pcie00: allocate port service [ 0.940858] pci_express 0000:00:0f.0:pcie01: allocate port service [ 0.940898] pci_express 0000:00:0f.0:pcie03: allocate port service [ 0.941081] initcall pcie_portdrv_init+0x0/0x4d returned 0 after 1 msecs [ 0.941230] calling aer_service_init+0x0/0x20 [ 0.944735] aer 0000:00:0a.0:pcie01: service driver aer loaded [ 0.948130] aer 0000:00:0d.0:pcie01: service driver aer loaded [ 0.951491] aer 0000:00:0e.0:pcie01: service driver aer loaded [ 0.954866] aer 0000:00:0f.0:pcie01: service driver aer loaded [ 0.954937] initcall aer_service_init+0x0/0x20 returned 0 after 12 msecs [ 0.955058] calling fb_console_init+0x0/0x129 [ 0.955231] initcall fb_console_init+0x0/0x129 returned 0 after 0 msecs [ 0.955362] calling vesafb_init+0x0/0x235 [ 0.955562] initcall vesafb_init+0x0/0x235 returned 0 after 0 msecs [ 0.955694] calling acpi_reserve_resources+0x0/0xeb [ 0.955807] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs [ 0.955941] calling acpi_button_init+0x0/0x5e [ 0.956159] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.956355] ACPI: Power Button (FF) [PWRF] [ 0.956599] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.956801] ACPI: Power Button (CM) [PWRB] [ 0.956961] initcall acpi_button_init+0x0/0x5e returned 0 after 0 msecs [ 0.957094] calling acpi_fan_init+0x0/0x32 [ 0.957264] initcall acpi_fan_init+0x0/0x32 returned 0 after 0 msecs [ 0.957393] calling acpi_video_init+0x0/0x5e [ 0.957580] initcall acpi_video_init+0x0/0x5e returned 0 after 0 msecs [ 0.957701] calling irqrouter_init_sysfs+0x0/0x38 [ 0.957895] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs [ 0.958039] calling acpi_pci_slot_init+0x0/0x20 [ 0.958326] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 0 msecs [ 0.958469] calling acpi_processor_init+0x0/0xe9 [ 0.958991] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.959475] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.959951] ACPI: ACPI0007:02 is registered as cooling_device2 [ 0.960429] ACPI: ACPI0007:03 is registered as cooling_device3 [ 0.960916] ACPI: ACPI0007:04 is registered as cooling_device4 [ 0.961412] ACPI: ACPI0007:05 is registered as cooling_device5 [ 0.961897] ACPI: ACPI0007:06 is registered as cooling_device6 [ 0.962389] ACPI: ACPI0007:07 is registered as cooling_device7 [ 0.962598] initcall acpi_processor_init+0x0/0xe9 returned 0 after 3 msecs [ 0.962731] calling acpi_container_init+0x0/0x42 [ 0.966984] initcall acpi_container_init+0x0/0x42 returned 0 after 3 msecs [ 0.967098] calling acpi_thermal_init+0x0/0x83 [ 0.967294] initcall acpi_thermal_init+0x0/0x83 returned 0 after 0 msecs [ 0.967428] calling rand_initialize+0x0/0x2c [ 0.967551] initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs [ 0.967693] calling tty_init+0x0/0x1c5 [ 0.979036] initcall tty_init+0x0/0x1c5 returned 0 after 10 msecs [ 0.979159] calling pty_init+0x0/0x46e [ 1.011394] initcall pty_init+0x0/0x46e returned 0 after 30 msecs [ 1.011524] calling rtc_init+0x0/0xa6 [ 1.011689] Real Time Clock Driver v1.12ac [ 1.011788] initcall rtc_init+0x0/0xa6 returned 0 after 0 msecs [ 1.011909] calling hpet_init+0x0/0x6a [ 1.012205] hpet_resources: 0xfed00000 is busy [ 1.012289] initcall hpet_init+0x0/0x6a returned 0 after 0 msecs [ 1.012420] calling agp_init+0x0/0x26 [ 1.012526] Linux agpgart interface v0.103 [ 1.012634] initcall agp_init+0x0/0x26 returned 0 after 0 msecs [ 1.012753] calling hangcheck_init+0x0/0x89 [ 1.012870] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.013056] Hangcheck: Using get_cycles(). [ 1.013168] initcall hangcheck_init+0x0/0x89 returned 0 after 0 msecs [ 1.013277] calling serial8250_init+0x0/0x131 [ 1.013396] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 1.013720] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.013992] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.014332] initcall serial8250_init+0x0/0x131 returned 0 after 0 msecs [ 1.014461] calling serial8250_pnp_init+0x0/0x12 [ 1.014839] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.015259] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.015518] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 0 msecs [ 1.015638] calling serial8250_pci_init+0x0/0x1b [ 1.015842] initcall serial8250_pci_init+0x0/0x1b returned 0 after 0 msecs [ 1.015965] calling topology_sysfs_init+0x0/0x49 [ 1.016128] initcall topology_sysfs_init+0x0/0x49 returned 0 after 0 msecs [ 1.016261] calling brd_init+0x0/0x18e [ 1.018037] brd: module loaded [ 1.018144] initcall brd_init+0x0/0x18e returned 0 after 1 msecs [ 1.018267] calling loop_init+0x0/0x1a1 [ 1.019231] loop: module loaded [ 1.019339] initcall loop_init+0x0/0x1a1 returned 0 after 0 msecs [ 1.019460] calling e1000_init_module+0x0/0x88 [ 1.019568] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.019676] Copyright (c) 1999-2006 Intel Corporation. [ 1.020217] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 1.020324] e1000 0000:04:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 1.284893] e1000: 0000:04:00.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:a8:25:f0 [ 1.311885] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.312366] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 1.312477] e1000 0000:04:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 1.576805] e1000: 0000:04:00.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:a8:25:f1 [ 1.603669] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.603829] initcall e1000_init_module+0x0/0x88 returned 0 after 557 msecs [ 1.603952] calling net_olddevs_init+0x0/0xa0 [ 1.604079] initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs [ 1.609349] calling init_nic+0x0/0x1b [ 1.609473] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 1.610021] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 1.610135] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 1.610336] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 1.611586] forcedeth 0000:00:08.0: ifname eth2, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:2b:ec [ 1.611780] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 1.612316] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 22 [ 1.612429] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 22 (level, low) -> IRQ 22 [ 1.612622] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 1.613903] forcedeth 0000:00:09.0: ifname eth3, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:2b:ed [ 1.614099] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 1.614360] initcall init_nic+0x0/0x1b returned 0 after 4 msecs [ 1.614488] calling videodev_init+0x0/0x7d [ 1.614604] Linux video capture interface: v2.00 [ 1.614754] initcall videodev_init+0x0/0x7d returned 0 after 0 msecs [ 1.614866] calling v4l2_i2c_drv_init+0x0/0x104 [ 1.615069] initcall v4l2_i2c_drv_init+0x0/0x104 returned 0 after 0 msecs [ 1.615192] calling ir_init+0x0/0x14 [ 1.615340] initcall ir_init+0x0/0x14 returned 0 after 0 msecs [ 1.615464] calling saa7134_init+0x0/0x4a [ 1.615575] saa7130/34: v4l2 driver version 0.2.14 loaded [ 1.615733] saa7134 0000:05:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 1.615939] saa7134[0]: found at 0000:05:00.0, rev: 1, irq: 19, latency: 64, mmio: 0xfeaffc00 [ 1.616137] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected] [ 1.616345] saa7134[0]: board init: gpio is c806000 [ 1.718983] tda829x_probe: driver disabled by Kconfig [ 1.719099] tuner' 0-0043: chip found @ 0x86 (saa7134[0]) [ 1.719207] tda9887 0-0043: creating new instance [ 1.719313] tda9887 0-0043: tda988[5/6/7] found [ 1.719420] tuner' 0-0043: type set to tda9887 [ 1.719422] tuner' 0-0043: tv freq set to 0.00 [ 1.719425] tuner' 0-0043: TV freq (0.00) out of range (44-958) [ 1.721981] tuner' 0-0043: saa7134[0] tuner' I2C addr 0x86 with type 74 used for 0x0e [ 1.723983] tea5767_autodetection: not probed - driver disabled by Kconfig [ 1.724095] tuner' 0-0060: Setting mode_mask to 0x0e [ 1.724097] tuner' 0-0060: chip found @ 0xc0 (saa7134[0]) [ 1.724195] tuner' 0-0060: tuner 0x60: Tuner type absent [ 1.765980] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 [ 1.766374] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff [ 1.766762] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff [ 1.767155] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.767534] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff [ 1.767914] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.768315] saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 11 e1 a1 ff ff ff ff ff ff ff ff [ 1.768703] saa7134[0]: i2c eeprom 70: 00 30 8d 18 3b 02 ff ff 74 50 ff ff ff ff ff ff [ 1.769105] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.769484] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.769864] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.770274] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.770654] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.771055] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.771435] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.771823] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.772324] tuner' 0-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00 [ 1.772327] tuner' 0-0043: set addr discarded for type 74, mask e. Asked to change tuner at addr 0xff, with mask e [ 1.772330] tuner' 0-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00 [ 1.772333] tuner' 0-0060: defining GPIO callback [ 1.778980] mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=22 [ 1.786978] mt20xx 0-0060: microtune MT2050 found, OK [ 1.787078] tuner' 0-0060: type set to MT2050 [ 1.787089] tuner' 0-0060: tv freq set to 400.00 [ 1.791979] tuner' 0-0060: saa7134[0] tuner' I2C addr 0xc0 with type 33 used for 0x0e [ 1.793980] tuner' 0-0043: switching to v4l2 [ 1.793982] tuner' 0-0060: switching to v4l2 [ 1.793984] tuner' 0-0060: tv freq set to 400.00 [ 1.798979] tuner' 0-0060: tv freq set to 400.00 [ 1.804094] saa7134[0]: registered device video0 [v4l2] [ 1.804246] saa7134[0]: registered device vbi0 [ 1.804359] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 1.806979] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 1.807030] initcall saa7134_init+0x0/0x4a returned 0 after 182 msecs [ 1.807170] calling empress_register+0x0/0x12 [ 1.807282] initcall empress_register+0x0/0x12 returned 0 after 0 msecs [ 1.807411] calling saa6752hs_init_module+0x0/0x14 [ 1.807706] initcall saa6752hs_init_module+0x0/0x14 returned 0 after 0 msecs [ 1.807830] calling dvb_register+0x0/0x12 [ 1.809981] DVB: registering new adapter (saa7134[0]) [ 1.810093] DVB: registering frontend 0 (Zarlink MT352 DVB-T)... [ 1.849978] initcall dvb_register+0x0/0x12 returned 0 after 40 msecs [ 1.850099] calling ide_init+0x0/0x76 [ 1.850205] Uniform Multi-Platform E-IDE driver [ 1.850406] initcall ide_init+0x0/0x76 returned 0 after 0 msecs [ 1.850527] calling amd74xx_ide_init+0x0/0x1b [ 1.850653] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 1.850763] NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0 [ 1.850970] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 1.851081] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. [ 1.851276] NFORCE-MCP55: IDE port disabled [ 1.851387] ide0: BM-DMA at 0xffa0-0xffa7 [ 1.851497] Probing IDE interface ide0... [ 2.523051] hda: PIONEER DVD-RW DVR-110, ATAPI CD/DVD-ROM drive [ 3.135000] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.135114] hda: UDMA/66 mode selected [ 3.135362] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.137552] initcall amd74xx_ide_init+0x0/0x1b returned 0 after 1227 msecs [ 3.137673] calling idedisk_init+0x0/0x12 [ 3.137834] initcall idedisk_init+0x0/0x12 returned 0 after 0 msecs [ 3.137971] calling ide_cdrom_init+0x0/0x12 [ 3.139284] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache [ 3.139284] Uniform CD-ROM driver Revision: 3.20 [ 3.157393] initcall ide_cdrom_init+0x0/0x12 returned 0 after 18 msecs [ 3.157549] calling sas_transport_init+0x0/0xbb [ 3.157885] initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs [ 3.158012] calling megasas_init+0x0/0x160 [ 3.158139] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 [ 3.158352] initcall megasas_init+0x0/0x160 returned 0 after 0 msecs [ 3.158496] calling init_sd+0x0/0xff [ 3.158654] Driver 'sd' needs updating - please use bus_type methods [ 3.158818] initcall init_sd+0x0/0xff returned 0 after 0 msecs [ 3.158958] calling init_sg+0x0/0xbf [ 3.159123] initcall init_sg+0x0/0xbf returned 0 after 0 msecs [ 3.159249] calling ahci_init+0x0/0x1b [ 3.159437] initcall ahci_init+0x0/0x1b returned 0 after 0 msecs [ 3.159571] calling nv_init+0x0/0x1b [ 3.159344] sata_nv 0000:00:05.0: version 3.5 [ 3.159711] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 3.159820] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 3.160027] sata_nv 0000:00:05.0: Using SWNCQ mode [ 3.160489] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 3.160600] scsi0 : sata_nv [ 3.160888] scsi1 : sata_nv [ 3.161198] ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21 [ 3.161314] ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21 [ 3.616942] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.620634] ata1.00: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133 [ 3.620769] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.623623] ata1.00: configured for UDMA/133 [ 3.938334] ata2: SATA link down (SStatus 0 SControl 300) [ 3.943583] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5 [ 3.944502] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 3.944502] sd 0:0:0:0: [sda] Write Protect is off [ 3.944502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.944502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.944502] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 3.944502] sd 0:0:0:0: [sda] Write Protect is off [ 3.944502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.944502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.944502] sda: sda1 sda2 [ 3.949016] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.954120] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.954585] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 3.954703] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 3.954896] sata_nv 0000:00:05.1: Using SWNCQ mode [ 3.955362] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 3.955469] scsi2 : sata_nv [ 3.955700] scsi3 : sata_nv [ 3.956008] ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 20 [ 3.956109] ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 20 [ 4.411924] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.439134] ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 4.439134] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.444756] ata3.00: configured for UDMA/133 [ 4.760322] ata4: SATA link down (SStatus 0 SControl 300) [ 4.760644] scsi 2:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 4.760978] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 4.761187] sd 2:0:0:0: [sdb] Write Protect is off [ 4.761285] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.761313] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.761549] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 4.761751] sd 2:0:0:0: [sdb] Write Protect is off [ 4.761852] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.761886] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.762096] sdb: sdb1 sdb2 sdb3 [ 4.765537] sd 2:0:0:0: [sdb] Attached SCSI disk [ 4.765749] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.766222] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23 [ 4.766331] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 23 (level, low) -> IRQ 23 [ 4.766522] sata_nv 0000:00:05.2: Using SWNCQ mode [ 4.766978] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 4.767085] scsi4 : sata_nv [ 4.767314] scsi5 : sata_nv [ 4.767629] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 23 [ 4.767744] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 23 [ 5.222912] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.247051] ata5.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133 [ 5.247174] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 5.253756] ata5.00: configured for UDMA/133 [ 5.569303] ata6: SATA link down (SStatus 0 SControl 300) [ 5.569598] scsi 4:0:0:0: Direct-Access ATA WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5 [ 5.569964] sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 5.570174] sd 4:0:0:0: [sdc] Write Protect is off [ 5.570274] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.570299] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.570540] sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) [ 5.570735] sd 4:0:0:0: [sdc] Write Protect is off [ 5.570846] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.570871] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.571078] sdc: sdc1 sdc2 sdc3 [ 5.573848] sd 4:0:0:0: [sdc] Attached SCSI disk [ 5.574065] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 5.574240] initcall nv_init+0x0/0x1b returned 0 after 2303 msecs [ 5.574381] calling fusion_init+0x0/0xf8 [ 5.574487] Fusion MPT base driver 3.04.07 [ 5.574593] Copyright (c) 1999-2008 LSI Corporation [ 5.574709] initcall fusion_init+0x0/0xf8 returned 0 after 0 msecs [ 5.574832] calling mptsas_init+0x0/0xf5 [ 5.574938] Fusion MPT SAS Host driver 3.04.07 [ 5.575120] initcall mptsas_init+0x0/0xf5 returned 0 after 0 msecs [ 5.575251] calling mptctl_init+0x0/0x105 [ 5.575363] Fusion MPT misc device (ioctl) driver 3.04.07 [ 5.575517] mptctl: Registered with Fusion MPT base driver [ 5.575618] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.575735] initcall mptctl_init+0x0/0x105 returned 0 after 0 msecs [ 5.575858] calling ieee1394_init+0x0/0x256 [ 5.576263] initcall ieee1394_init+0x0/0x256 returned 0 after 0 msecs [ 5.576395] calling ohci1394_init+0x0/0x1b [ 5.576557] initcall ohci1394_init+0x0/0x1b returned 0 after 0 msecs [ 5.576679] calling video1394_init_module+0x0/0xc6 [ 5.576827] video1394: Installed video1394 module [ 5.576939] initcall video1394_init_module+0x0/0xc6 returned 0 after 0 msecs [ 5.577072] calling init_raw1394+0x0/0xf2 [ 5.577228] ieee1394: raw1394: /dev/raw1394 device initialized [ 5.577378] initcall init_raw1394+0x0/0xf2 returned 0 after 0 msecs [ 5.577513] calling sbp2_module_init+0x0/0x72 [ 5.577670] initcall sbp2_module_init+0x0/0x72 returned 0 after 0 msecs [ 5.577803] calling ether1394_init_module+0x0/0x70 [ 5.577982] initcall ether1394_init_module+0x0/0x70 returned 0 after 0 msecs [ 5.578102] calling cdrom_init+0x0/0xd [ 5.578216] initcall cdrom_init+0x0/0xd returned 0 after 0 msecs [ 5.578338] calling mon_init+0x0/0x103 [ 5.578544] initcall mon_init+0x0/0x103 returned 0 after 0 msecs [ 5.578665] calling ehci_hcd_init+0x0/0x8b [ 5.578772] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 5.579144] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 5.579255] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 5.579461] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 5.579463] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 5.579632] drivers/usb/core/inode.c: creating file 'devices' [ 5.579638] drivers/usb/core/inode.c: creating file '001' [ 5.579689] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 5.579887] ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10 [ 5.579896] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 [ 5.579901] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park [ 5.579915] ehci_hcd 0000:00:02.1: park 0 [ 5.579919] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 5.579927] ehci_hcd 0000:00:02.1: debug port 1 [ 5.580042] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 5.580044] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 5.580058] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfdffac00 [ 5.580167] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 5.580173] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 5.585991] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.586215] usb usb1: default language 0x0409 [ 5.586244] usb usb1: uevent [ 5.586289] usb usb1: usb_probe_device [ 5.586291] usb usb1: configuration #1 chosen from 1 choice [ 5.586406] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 5.586418] usb 1-0:1.0: uevent [ 5.586463] hub 1-0:1.0: usb_probe_interface [ 5.586465] hub 1-0:1.0: usb_probe_interface - got id [ 5.586467] hub 1-0:1.0: USB hub found [ 5.586581] hub 1-0:1.0: 10 ports detected [ 5.586694] hub 1-0:1.0: standalone hub [ 5.586695] hub 1-0:1.0: no power switching (usb 1.0) [ 5.586697] hub 1-0:1.0: individual port over-current protection [ 5.586699] hub 1-0:1.0: power on to power good time: 20ms [ 5.586703] hub 1-0:1.0: local power source is good [ 5.586706] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 5.686825] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 [ 5.687087] drivers/usb/core/inode.c: creating file '001' [ 5.687100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.686941] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 5.686950] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s [ 5.687210] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.687401] usb usb1: Product: EHCI Host Controller [ 5.687507] usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd [ 5.687604] usb usb1: SerialNumber: 0000:00:02.1 [ 5.687778] initcall ehci_hcd_init+0x0/0x8b returned 0 after 103 msecs [ 5.687910] calling ohci_hcd_mod_init+0x0/0xa4 [ 5.688021] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.688024] ohci_hcd: block sizes: ed 80 td 96 [ 5.688364] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 5.688473] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 5.688673] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 5.688675] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 5.688828] drivers/usb/core/inode.c: creating file '002' [ 5.688875] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 5.689093] ohci_hcd 0000:00:02.0: created debug files [ 5.689094] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 5.689098] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfdffb000 [ 5.741993] ohci_hcd 0000:00:02.0: OHCI controller state [ 5.741996] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 5.741999] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 5.742002] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 5.742005] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 5.742007] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH [ 5.742012] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 5.742016] ohci_hcd 0000:00:02.0: roothub.a 0100120a POTPGT=1 NOCP NPS NDP=10(10) [ 5.742019] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 5.742022] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 5.742026] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 5.742029] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 5.742032] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 5.742035] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 5.742038] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 5.742042] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 5.742045] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS [ 5.742048] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS [ 5.742051] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS [ 5.742054] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS [ 5.742063] usb usb2: default language 0x0409 [ 5.742092] usb usb2: uevent [ 5.742130] usb usb2: usb_probe_device [ 5.742133] usb usb2: configuration #1 chosen from 1 choice [ 5.742250] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.742260] usb 2-0:1.0: uevent [ 5.742295] hub 2-0:1.0: usb_probe_interface [ 5.742297] hub 2-0:1.0: usb_probe_interface - got id [ 5.742299] hub 2-0:1.0: USB hub found [ 5.742413] hub 2-0:1.0: 10 ports detected [ 5.742512] hub 2-0:1.0: standalone hub [ 5.742514] hub 2-0:1.0: no power switching (usb 1.0) [ 5.742525] hub 2-0:1.0: no over-current protection [ 5.742526] hub 2-0:1.0: power on to power good time: 2ms [ 5.742531] hub 2-0:1.0: local power source is good [ 5.742533] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 5.790809] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [ 5.842048] ehci_hcd 0000:00:02.1: port 1 high speed [ 5.842052] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 5.843029] drivers/usb/core/inode.c: creating file '001' [ 5.843037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.843135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.843336] usb usb2: Product: OHCI Host Controller [ 5.843433] usb usb2: Manufacturer: Linux 2.6.26 ohci_hcd [ 5.843539] usb usb2: SerialNumber: 0000:00:02.0 [ 5.843721] initcall ohci_hcd_mod_init+0x0/0xa4 returned 0 after 148 msecs [ 5.843842] calling usblp_init+0x0/0x1b [ 5.892813] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.944110] ehci_hcd 0000:00:02.1: port 1 high speed [ 5.944115] ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 6.007481] usb 1-1: uevent [ 6.007532] usb 1-1: usb_probe_device [ 6.007535] usb 1-1: configuration #1 chosen from 1 choice [ 6.007695] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 6.007707] usb 1-1:1.0: uevent [ 6.007752] hub 1-1:1.0: usb_probe_interface [ 6.007754] hub 1-1:1.0: usb_probe_interface - got id [ 6.007756] hub 1-1:1.0: USB hub found [ 6.007945] hub 1-1:1.0: 2 ports detected [ 6.008017] hub 1-1:1.0: compound device; port removable status: FR [ 6.008017] hub 1-1:1.0: individual port power switching [ 6.008017] hub 1-1:1.0: individual port over-current protection [ 6.008017] hub 1-1:1.0: Single TT [ 6.008017] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 6.008017] hub 1-1:1.0: power on to power good time: 100ms [ 6.008261] hub 1-1:1.0: local power source is good [ 6.008263] hub 1-1:1.0: enabling power on all ports [ 6.108818] usb 1-1: link qh256-0001/ffff88007f808140 start 255 [1/0 us] [ 6.108886] drivers/usb/core/inode.c: creating file '002' [ 6.108902] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 6.109017] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.109156] ehci_hcd 0000:00:02.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 6.109161] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s [ 6.212814] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 [ 6.263801] ehci_hcd 0000:00:02.1: port 3 full speed --> companion [ 6.263804] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT [ 6.263830] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 6.314813] ehci_hcd 0000:00:02.1: GetStatus port 3 status 003802 POWER OWNER sig=j CSC [ 6.314843] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 6.314853] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS [ 6.314857] hub 2-0:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 6.418797] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 6.524809] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 6.575807] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 6.683805] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 6.747799] usb 2-3: ep0 maxpacket = 8 [ 6.767826] usb 2-3: default language 0x0409 [ 6.777849] usb 2-3: uevent [ 6.777894] usb 2-3: usb_probe_device [ 6.777895] usb 2-3: configuration #1 chosen from 1 choice [ 6.780827] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 6.780838] usb 2-3:1.0: uevent [ 6.780973] drivers/usb/core/inode.c: creating file '002' [ 6.780982] usb 2-3: New USB device found, idVendor=04f9, idProduct=0027 [ 6.781094] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.781237] usb 2-3: Product: HL-2030 series [ 6.781356] usb 2-3: Manufacturer: Brother [ 6.781473] usb 2-3: SerialNumber: E6J824776 [ 6.781620] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0006 [ 6.781870] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 6.885122] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 6.896119] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 6.958124] usb 1-1.1: new high speed USB device using ehci_hcd and address 4 [ 6.971117] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 7.046385] usb 1-1.1: uevent [ 7.046429] usb 1-1.1: usb_probe_device [ 7.046431] usb 1-1.1: configuration #1 chosen from 1 choice [ 7.046614] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 7.046628] usb 1-1.1:1.0: uevent [ 7.046670] hub 1-1.1:1.0: usb_probe_interface [ 7.046671] hub 1-1.1:1.0: usb_probe_interface - got id [ 7.046673] hub 1-1.1:1.0: USB hub found [ 7.046864] hub 1-1.1:1.0: 4 ports detected [ 7.053010] hub 1-1.1:1.0: compound device; port removable status: FRRR [ 7.053011] hub 1-1.1:1.0: ganged power switching [ 7.053013] hub 1-1.1:1.0: global over-current protection [ 7.054154] hub 1-1.1:1.0: TT per port [ 7.054155] hub 1-1.1:1.0: TT requires at most 8 FS bit times (666 ns) [ 7.054157] hub 1-1.1:1.0: power on to power good time: 100ms [ 7.054353] hub 1-1.1:1.0: local power source is good [ 7.054355] hub 1-1.1:1.0: no over-current condition exists [ 7.054357] hub 1-1.1:1.0: enabling power on all ports [ 7.154785] usb 1-1.1: link qh256-0001/ffff88007f808280 start 255 [1/0 us] [ 7.154789] drivers/usb/core/inode.c: creating file '004' [ 7.154798] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2602 [ 7.154920] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.155352] hub 1-1:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 7.259104] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 7.270101] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 7.332106] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 7.349099] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 7.562472] usb 1-1.2: skipped 1 descriptor after configuration [ 7.562475] usb 1-1.2: skipped 11 descriptors after interface [ 7.562477] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.562479] usb 1-1.2: skipped 17 descriptors after interface [ 7.562483] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.562485] usb 1-1.2: skipped 4 descriptors after interface [ 7.562487] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.562489] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.562491] usb 1-1.2: skipped 2 descriptors after interface [ 7.562493] usb 1-1.2: skipped 1 descriptor after endpoint [ 7.564343] usb 1-1.2: default language 0x0409 [ 7.567989] usb 1-1.2: uevent [ 7.568032] usb 1-1.2: usb_probe_device [ 7.568034] usb 1-1.2: configuration #1 chosen from 1 choice [ 7.568220] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 7.568233] usb 1-1.2:1.0: uevent [ 7.568326] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) [ 7.568339] usb 1-1.2:1.1: uevent [ 7.568377] usb 1-1.2: adding 1-1.2:1.2 (config #1, interface 2) [ 7.568390] usb 1-1.2:1.2: uevent [ 7.568427] usb 1-1.2: adding 1-1.2:1.3 (config #1, interface 3) [ 7.568441] usb 1-1.2:1.3: uevent [ 7.568486] drivers/usb/core/inode.c: creating file '005' [ 7.568494] usb 1-1.2: New USB device found, idVendor=046d, idProduct=08ce [ 7.568606] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 7.568833] usb 1-1.2: SerialNumber: 48ADA3A2 [ 7.568948] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 7.568955] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008 [ 7.568960] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0004 [ 7.569132] usblp 2-3:1.0: usb_probe_interface [ 7.569135] usblp 2-3:1.0: usb_probe_interface - got id [ 7.570096] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0006 [ 7.570342] hub 1-1.1:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 7.575803] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 7.575900] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027 [ 7.674097] hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 7.686093] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms [ 7.748097] usb 1-1.1.1: new high speed USB device using ehci_hcd and address 6 [ 7.767090] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms [ 7.862214] usb 1-1.1.1: skipped 1 descriptor after endpoint [ 7.869842] usb 1-1.1.1: default language 0x0409 [ 7.911859] usb 1-1.1.1: uevent [ 7.911903] usb 1-1.1.1: usb_probe_device [ 7.911905] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 7.912086] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0) [ 7.912099] usb 1-1.1.1:1.0: uevent [ 7.912237] drivers/usb/core/inode.c: creating file '006' [ 7.912245] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=2228 [ 7.912364] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.912566] usb 1-1.1.1: Product: Flash Card Reader [ 7.912679] usb 1-1.1.1: Manufacturer: Generic [ 7.912793] usb 1-1.1.1: SerialNumber: 071031504947 [ 7.913212] hub 1-1.1:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 8.017090] hub 1-1.1:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 8.028084] hub 1-1.1:1.0: port 2 not reset yet, waiting 10ms [ 8.090090] usb 1-1.1.2: new low speed USB device using ehci_hcd and address 7 [ 8.103082] hub 1-1.1:1.0: port 2 not reset yet, waiting 10ms [ 8.180591] usb 1-1.1.2: skipped 1 descriptor after interface [ 8.180957] usb 1-1.1.2: default language 0x0409 [ 8.183351] usb 1-1.1.2: uevent [ 8.183395] usb 1-1.1.2: usb_probe_device [ 8.183397] usb 1-1.1.2: configuration #1 chosen from 1 choice [ 8.183830] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0) [ 8.183841] usb 1-1.1.2:1.0: uevent [ 8.183933] drivers/usb/core/inode.c: creating file '007' [ 8.183940] usb 1-1.1.2: New USB device found, idVendor=046d, idProduct=c044 [ 8.184052] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.184263] usb 1-1.1.2: Product: USB-PS/2 Optical Mouse [ 8.184372] usb 1-1.1.2: Manufacturer: Logitech [ 8.185208] hub 1-1.1:1.0: state 7 ports 4 chg 0000 evt 0004 [ 8.185385] usbcore: registered new interface driver usblp [ 8.185504] initcall usblp_init+0x0/0x1b returned 0 after 2233 msecs [ 8.185633] calling usb_stor_init+0x0/0x50 [ 8.185747] Initializing USB Mass Storage driver... [ 8.185893] usb-storage 1-1.1.1:1.0: usb_probe_interface [ 8.185897] usb-storage 1-1.1.1:1.0: usb_probe_interface - got id [ 8.185971] scsi6 : SCSI emulation for USB Mass Storage devices [ 8.186232] usb-storage: device found at 6 [ 8.186234] usb-storage: waiting for device to settle before scanning [ 8.186267] usbcore: registered new interface driver usb-storage [ 8.186378] USB Mass Storage support registered. [ 8.186498] initcall usb_stor_init+0x0/0x50 returned 0 after 0 msecs [ 8.186621] calling usb_usual_init+0x0/0x3e [ 8.186800] usbcore: registered new interface driver libusual [ 8.186912] initcall usb_usual_init+0x0/0x3e returned 0 after 0 msecs [ 8.187036] calling i8042_init+0x0/0x39f [ 8.187271] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 8.190282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.190407] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.190532] initcall i8042_init+0x0/0x39f returned 0 after 3 msecs [ 8.190657] calling mousedev_init+0x0/0x8e [ 8.190883] mice: PS/2 mouse device common for all mice [ 8.191004] initcall mousedev_init+0x0/0x8e returned 0 after 0 msecs [ 8.191138] calling evdev_init+0x0/0x12 [ 8.200242] initcall evdev_init+0x0/0x12 returned 0 after 8 msecs [ 8.200367] calling atkbd_init+0x0/0x27 [ 8.200549] initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs [ 8.200687] calling psmouse_init+0x0/0x6d [ 8.221641] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 8.250475] initcall psmouse_init+0x0/0x6d returned 0 after 47 msecs [ 8.250610] calling i2c_dev_init+0x0/0x9e [ 8.250745] i2c /dev entries driver [ 8.251046] initcall i2c_dev_init+0x0/0x9e returned 0 after 0 msecs [ 8.251193] calling nforce2_init+0x0/0x1b [ 8.251598] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2d00 [ 8.251780] i2c-adapter i2c-2: nForce2 SMBus adapter at 0x2e00 [ 8.251943] initcall nforce2_init+0x0/0x1b returned 0 after 0 msecs [ 8.252074] calling sm_lm85_init+0x0/0x14 [ 8.269927] i2c-adapter i2c-2: lm85: Detected SMSC chip [ 8.270038] i2c-adapter i2c-2: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. [ 8.270240] hwmon-vid: Unknown VRM version of your x86 CPU [ 8.283917] i2c-adapter i2c-2: lm85: Detected SMSC chip [ 8.284028] i2c-adapter i2c-2: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. [ 8.284238] hwmon-vid: Unknown VRM version of your x86 CPU [ 8.291970] initcall sm_lm85_init+0x0/0x14 returned 0 after 37 msecs [ 8.292083] calling linear_init+0x0/0x12 [ 8.292189] md: linear personality registered for level -1 [ 8.292297] initcall linear_init+0x0/0x12 returned 0 after 0 msecs [ 8.292407] calling raid0_init+0x0/0x12 [ 8.292522] md: raid0 personality registered for level 0 [ 8.292630] initcall raid0_init+0x0/0x12 returned 0 after 0 msecs [ 8.292749] calling raid_init+0x0/0x12 [ 8.292865] md: raid1 personality registered for level 1 [ 8.292977] initcall raid_init+0x0/0x12 returned 0 after 0 msecs [ 8.293098] calling raid5_init+0x0/0x3e [ 8.309936] raid6: int64x1 2062 MB/s [ 8.326932] raid6: int64x2 2785 MB/s [ 8.343938] raid6: int64x4 2281 MB/s [ 8.360919] raid6: int64x8 1496 MB/s [ 8.377916] raid6: sse2x1 2968 MB/s [ 8.394925] raid6: sse2x2 4937 MB/s [ 8.411913] raid6: sse2x4 6062 MB/s [ 8.412010] raid6: using algorithm sse2x4 (6062 MB/s) [ 8.412118] md: raid6 personality registered for level 6 [ 8.412227] md: raid5 personality registered for level 5 [ 8.412336] md: raid4 personality registered for level 4 [ 8.412434] initcall raid5_init+0x0/0x3e returned 0 after 113 msecs [ 8.412568] calling dm_init+0x0/0x49 [ 8.412815] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 8.413014] initcall dm_init+0x0/0x49 returned 0 after 0 msecs [ 8.413137] calling dm_crypt_init+0x0/0x69 [ 8.413260] initcall dm_crypt_init+0x0/0x69 returned 0 after 0 msecs [ 8.413383] calling dm_snapshot_init+0x0/0x1f1 [ 8.413583] initcall dm_snapshot_init+0x0/0x1f1 returned 0 after 0 msecs [ 8.413707] calling dm_mirror_init+0x0/0x2f [ 8.413824] initcall dm_mirror_init+0x0/0x2f returned 0 after 0 msecs [ 8.413942] calling dm_dirty_log_init+0x0/0x59 [ 8.414051] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 msecs [ 8.414181] calling dm_zero_init+0x0/0x31 [ 8.414299] initcall dm_zero_init+0x0/0x31 returned 0 after 0 msecs [ 8.414418] calling edac_init+0x0/0x9d [ 8.414534] EDAC MC: Ver: 2.1.0 Jul 19 2008 [ 8.414808] initcall edac_init+0x0/0x9d returned 0 after 0 msecs [ 8.414938] calling cpufreq_stats_init+0x0/0x8f [ 8.415058] initcall cpufreq_stats_init+0x0/0x8f returned 0 after 0 msecs [ 8.415182] calling cpufreq_gov_powersave_init+0x0/0x12 [ 8.415295] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 msecs [ 8.415498] calling cpufreq_gov_userspace_init+0x0/0x12 [ 8.415615] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs [ 8.415818] calling cpufreq_gov_dbs_init+0x0/0x46 [ 8.416145] initcall cpufreq_gov_dbs_init+0x0/0x46 returned 0 after 0 msecs [ 8.416268] calling cpufreq_gov_dbs_init+0x0/0x12 [ 8.416381] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs [ 8.416510] calling hid_init+0x0/0xb [ 8.416653] initcall hid_init+0x0/0xb returned 0 after 0 msecs [ 8.416785] calling hid_init+0x0/0x62 [ 8.416958] usbcore: registered new interface driver hiddev [ 8.417098] usbhid 1-1.1.2:1.0: usb_probe_interface [ 8.417100] usbhid 1-1.1.2:1.0: usb_probe_interface - got id [ 8.420102] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input3 [ 8.430282] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1.1.2 [ 8.430658] usbcore: registered new interface driver usbhid [ 8.430771] usbhid: v2.6:USB HID core driver [ 8.430893] initcall hid_init+0x0/0x62 returned 0 after 13 msecs [ 8.431035] calling init_soundcore+0x0/0x59 [ 8.431194] initcall init_soundcore+0x0/0x59 returned 0 after 0 msecs [ 8.431338] calling alsa_sound_init+0x0/0x87 [ 8.431485] Advanced Linux Sound Architecture Driver Version 1.0.17. [ 8.431599] initcall alsa_sound_init+0x0/0x87 returned 0 after 0 msecs [ 8.431742] calling alsa_hwdep_init+0x0/0x64 [ 8.431865] initcall alsa_hwdep_init+0x0/0x64 returned 0 after 0 msecs [ 8.431998] calling alsa_timer_init+0x0/0x162 [ 8.432177] initcall alsa_timer_init+0x0/0x162 returned 0 after 0 msecs [ 8.432310] calling rtctimer_init+0x0/0x115 [ 8.438481] initcall rtctimer_init+0x0/0x115 returned 0 after 0 msecs [ 8.438616] calling alsa_pcm_init+0x0/0x6c [ 8.438765] initcall alsa_pcm_init+0x0/0x6c returned 0 after 0 msecs [ 8.438891] calling snd_mem_init+0x0/0x2c [ 8.439040] initcall snd_mem_init+0x0/0x2c returned 0 after 0 msecs [ 8.439165] calling alsa_rawmidi_init+0x0/0x80 [ 8.439325] initcall alsa_rawmidi_init+0x0/0x80 returned 0 after 0 msecs [ 8.439460] calling alsa_mixer_oss_init+0x0/0x3a [ 8.439608] initcall alsa_mixer_oss_init+0x0/0x3a returned 0 after 0 msecs [ 8.439761] calling alsa_pcm_oss_init+0x0/0x7d [ 8.439902] initcall alsa_pcm_oss_init+0x0/0x7d returned 0 after 0 msecs [ 8.440055] calling alsa_seq_oss_init+0x0/0x16c [ 8.440379] initcall alsa_seq_oss_init+0x0/0x16c returned 0 after 0 msecs [ 8.440515] calling alsa_seq_init+0x0/0x57 [ 8.440714] initcall alsa_seq_init+0x0/0x57 returned 0 after 0 msecs [ 8.440859] calling alsa_seq_device_init+0x0/0x5b [ 8.440998] initcall alsa_seq_device_init+0x0/0x5b returned 0 after 0 msecs [ 8.441147] calling alsa_seq_midi_event_init+0x0/0x8 [ 8.441298] initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 msecs [ 8.441553] calling alsa_seq_midi_init+0x0/0x3a [ 8.441702] initcall alsa_seq_midi_init+0x0/0x3a returned 0 after 0 msecs [ 8.441856] calling alsa_seq_midi_emul_init+0x0/0x8 [ 8.441995] initcall alsa_seq_midi_emul_init+0x0/0x8 returned 0 after 0 msecs [ 8.442156] calling alsa_opl3_init+0x0/0x8 [ 8.442296] initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 msecs [ 8.442448] calling alsa_opl3_seq_init+0x0/0x1e [ 8.442578] initcall alsa_opl3_seq_init+0x0/0x1e returned 0 after 0 msecs [ 8.442738] calling alsa_mpu401_uart_init+0x0/0x8 [ 8.442873] initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 msecs [ 8.443026] calling alsa_card_cmipci_init+0x0/0x1b [ 8.443738] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 8.443874] C-Media PCI 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 8.445368] initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 1 msecs [ 8.445528] calling snd_usb_audio_init+0x0/0x3d [ 8.445682] snd-usb-audio 1-1.2:1.2: usb_probe_interface [ 8.445686] snd-usb-audio 1-1.2:1.2: usb_probe_interface - got id [ 8.456343] 5:3:3: cannot get freq at ep 0x86 [ 8.483417] usbcore: registered new interface driver snd-usb-audio [ 8.483549] initcall snd_usb_audio_init+0x0/0x3d returned 0 after 36 msecs [ 8.483675] calling alsa_sound_last_init+0x0/0x61 [ 8.483801] ALSA device list: [ 8.483916] #0: C-Media CMI8768 at 0xc800, irq 17 [ 8.484038] #1: USB Device 0x46d:0x8ce at usb-0000:00:02.1-1.2, high speed [ 8.484167] initcall alsa_sound_last_init+0x0/0x61 returned 0 after 0 msecs [ 8.484311] calling sysctl_core_init+0x0/0x12 [ 8.484482] initcall sysctl_core_init+0x0/0x12 returned 0 after 0 msecs [ 8.484607] calling flow_cache_init+0x0/0x1bb [ 8.484790] initcall flow_cache_init+0x0/0x1bb returned 0 after 0 msecs [ 8.484928] calling blackhole_module_init+0x0/0x12 [ 8.485055] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 msecs [ 8.485191] calling sysctl_ipv4_init+0x0/0x4e [ 8.485637] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs [ 8.485778] calling init_syncookies+0x0/0x19 [ 8.485921] initcall init_syncookies+0x0/0x19 returned 0 after 0 msecs [ 8.486052] calling ipv4_netfilter_init+0x0/0x12 [ 8.486183] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 msecs [ 8.486320] calling inet_diag_init+0x0/0x69 [ 8.486446] initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs [ 8.486570] calling tcp_diag_init+0x0/0x12 [ 8.486692] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs [ 8.486820] calling bictcp_register+0x0/0x12 [ 8.486948] TCP bic registered [ 8.487069] initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs [ 8.487220] calling cubictcp_register+0x0/0x6e [ 8.487348] TCP cubic registered [ 8.487462] initcall cubictcp_register+0x0/0x6e returned 0 after 0 msecs [ 8.487596] calling tcp_westwood_register+0x0/0x12 [ 8.487720] TCP westwood registered [ 8.487850] initcall tcp_westwood_register+0x0/0x12 returned 0 after 0 msecs [ 8.487977] calling hstcp_register+0x0/0x12 [ 8.488105] TCP highspeed registered [ 8.488230] initcall hstcp_register+0x0/0x12 returned 0 after 0 msecs [ 8.488396] calling hybla_register+0x0/0x12 [ 8.488523] TCP hybla registered [ 8.488664] initcall hybla_register+0x0/0x12 returned 0 after 0 msecs [ 8.488819] calling htcp_register+0x0/0x12 [ 8.488965] TCP htcp registered [ 8.489103] initcall htcp_register+0x0/0x12 returned 0 after 0 msecs [ 8.489258] calling tcp_vegas_register+0x0/0x14 [ 8.489396] TCP vegas registered [ 8.489531] initcall tcp_vegas_register+0x0/0x14 returned 0 after 0 msecs [ 8.489703] calling tcp_veno_register+0x0/0x14 [ 8.489838] TCP veno registered [ 8.489965] initcall tcp_veno_register+0x0/0x14 returned 0 after 0 msecs [ 8.490143] calling tcp_scalable_register+0x0/0x12 [ 8.490283] TCP scalable registered [ 8.490425] initcall tcp_scalable_register+0x0/0x12 returned 0 after 0 msecs [ 8.490568] calling tcp_lp_register+0x0/0x12 [ 8.490726] TCP lp registered [ 8.490850] initcall tcp_lp_register+0x0/0x12 returned 0 after 0 msecs [ 8.491008] calling tcp_yeah_register+0x0/0x14 [ 8.491149] TCP yeah registered [ 8.491293] initcall tcp_yeah_register+0x0/0x14 returned 0 after 0 msecs [ 8.491445] calling tcp_illinois_register+0x0/0x12 [ 8.491593] TCP illinois registered [ 8.491720] initcall tcp_illinois_register+0x0/0x12 returned 0 after 0 msecs [ 8.491873] calling inet6_init+0x0/0x320 [ 8.492116] NET: Registered protocol family 10 [ 8.492856] lo: Disabled Privacy Extensions [ 8.494459] initcall inet6_init+0x0/0x320 returned 0 after 2 msecs [ 8.494622] calling packet_init+0x0/0x47 [ 8.494750] NET: Registered protocol family 17 [ 8.494900] initcall packet_init+0x0/0x47 returned 0 after 0 msecs [ 8.495044] calling powernowk8_init+0x0/0x92 [ 8.495273] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2354 processors (8 cpu cores) (version 2.20.00) [ 8.495751] powernow-k8: 0 : pstate 0 (2200 MHz) [ 8.495869] powernow-k8: 1 : pstate 1 (2000 MHz) [ 8.496017] powernow-k8: 2 : pstate 2 (1700 MHz) [ 8.496117] powernow-k8: 3 : pstate 3 (1400 MHz) [ 8.496239] powernow-k8: 4 : pstate 4 (1100 MHz) [ 8.497326] powernow-k8: 0 : pstate 0 (2200 MHz) [ 8.497469] powernow-k8: 1 : pstate 1 (2000 MHz) [ 8.497616] powernow-k8: 2 : pstate 2 (1700 MHz) [ 8.497764] powernow-k8: 3 : pstate 3 (1400 MHz) [ 8.497902] powernow-k8: 4 : pstate 4 (1100 MHz) [ 8.498279] initcall powernowk8_init+0x0/0x92 returned 0 after 2 msecs [ 8.498444] calling hpet_insert_resource+0x0/0x23 [ 8.498598] initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs [ 8.498743] calling update_mp_table+0x0/0x492 [ 8.498890] initcall update_mp_table+0x0/0x492 returned 0 after 0 msecs [ 8.499045] calling lapic_insert_resource+0x0/0x40 [ 8.499188] initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs [ 8.499324] calling init_lapic_nmi_sysfs+0x0/0x38 [ 8.499480] initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs [ 8.499633] calling ioapic_insert_resources+0x0/0x4f [ 8.499778] initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs [ 8.500038] calling check_early_ioremap_leak+0x0/0x42 [ 8.500161] initcall check_early_ioremap_leak+0x0/0x42 returned 0 after 0 msecs [ 8.500459] calling init_oops_id+0x0/0x23 [ 8.500582] initcall init_oops_id+0x0/0x23 returned 0 after 0 msecs [ 8.500743] calling disable_boot_consoles+0x0/0x3a [ 8.500887] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs [ 8.501044] calling pm_qos_power_init+0x0/0x61 [ 8.501328] initcall pm_qos_power_init+0x0/0x61 returned 0 after 0 msecs [ 8.501503] calling debugfs_kprobe_init+0x0/0x89 [ 8.501645] initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs [ 8.501798] calling random32_reseed+0x0/0x6c [ 8.501962] initcall random32_reseed+0x0/0x6c returned 0 after 0 msecs [ 8.502098] calling pci_sysfs_init+0x0/0x4c [ 8.502466] initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs [ 8.502619] calling acpi_wakeup_device_init+0x0/0xb1 [ 8.502771] initcall acpi_wakeup_device_init+0x0/0xb1 returned 0 after 0 msecs [ 8.509043] calling seqgen_init+0x0/0xf [ 8.509182] initcall seqgen_init+0x0/0xf returned 0 after 0 msecs [ 8.509326] calling saa7134_alsa_init+0x0/0x6e [ 8.509445] saa7134 ALSA driver for DMA sound loaded [ 8.509598] saa7134[0]/alsa: saa7134[0] at 0xfeaffc00 irq 19 registered as card -1 [ 8.510243] initcall saa7134_alsa_init+0x0/0x6e returned 0 after 0 msecs [ 8.510388] calling scsi_complete_async_scans+0x0/0x10c [ 8.510508] initcall scsi_complete_async_scans+0x0/0x10c returned 0 after 0 msecs [ 8.510744] calling memmap_init+0x0/0x98 [ 8.510893] initcall memmap_init+0x0/0x98 returned 0 after 0 msecs [ 8.511045] calling pci_mmcfg_late_insert_resources+0x0/0x43 [ 8.511169] initcall pci_mmcfg_late_insert_resources+0x0/0x43 returned 0 after 0 msecs [ 8.511413] calling tcp_congestion_default+0x0/0x12 [ 8.511534] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs [ 8.511872] md: Autodetecting RAID arrays. [ 8.511999] md: Scanned 0 and added 0 devices. [ 8.512118] md: autorun ... [ 8.512240] md: ... autorun DONE. [ 8.532967] kjournald starting. Commit interval 5 seconds [ 8.532979] EXT3-fs: mounted filesystem with ordered data mode. [ 8.532990] VFS: Mounted root (ext3 filesystem) readonly. [ 8.533004] Freeing unused kernel memory: 320k freed [ 8.533162] Write protecting the kernel read-only data: 5328k [ 9.210264] md: md0 stopped. [ 9.408280] md: bind [ 9.408583] md: bind [ 9.408903] raid1: raid set md0 active with 2 out of 2 mirrors [ 9.440980] md0: bitmap initialized from disk: read 15/15 pages, set 47 bits [ 9.441104] created bitmap (233 pages) for device md0 [ 9.822598] kjournald starting. Commit interval 5 seconds [ 9.822532] EXT3-fs: mounted filesystem with ordered data mode. [ 12.321768] usb usb2: uevent [ 12.321785] usb 2-0:1.0: uevent [ 12.321816] usb 2-3: uevent [ 12.321831] usb 2-3:1.0: uevent [ 12.321917] usb usb1: uevent [ 12.321931] usb 1-0:1.0: uevent [ 12.321957] usb 1-1: uevent [ 12.321973] usb 1-1.1: uevent [ 12.321990] usb 1-1.1.1: uevent [ 12.322006] usb 1-1.1.1:1.0: uevent [ 12.322080] usb 1-1.1.2: uevent [ 12.322096] usb 1-1.1.2:1.0: uevent [ 12.322192] usb 1-1.1:1.0: uevent [ 12.322220] usb 1-1.2: uevent [ 12.322235] usb 1-1.2:1.0: uevent [ 12.322265] usb 1-1.2:1.1: uevent [ 12.322281] usb 1-1.2:1.2: uevent [ 12.322378] usb 1-1.2:1.3: uevent [ 12.322393] usb 1-1:1.0: uevent [ 12.776745] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 12.777181] Symbol init_mm is marked as UNUSED, however this module is using it. [ 12.777183] This symbol will go away in the future. [ 12.777186] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. [ 12.800018] [fglrx] vendor: 1002 device: 95c0 count: 1 [ 12.800770] [fglrx] Maximum main memory to use for locked dma buffers: 15775 MBytes. [ 12.801147] [fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured [ 12.801268] [fglrx] PAT is disabled! [ 12.801291] [fglrx] module loaded - fglrx 8.50.3 [Jun 2 2008] with 1 minors [ 13.191916] usb-storage: device scan complete [ 13.196062] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0 [ 13.200048] scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0 [ 13.205158] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 13.205202] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 13.210910] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 13.210952] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 15.939702] ------------[ cut here ]------------ [ 15.939706] WARNING: at include/linux/blkdev.h:447 blk_plug_device+0x5e/0x97() [ 15.939709] Modules linked in: fglrx(P) [ 15.939715] Pid: 3192, comm: mount Tainted: P 2.6.26 #03414-g33af79d-dirty [ 15.939717] [ 15.939717] Call Trace: [ 15.939724] [] warn_on_slowpath+0x58/0x86 [ 15.939731] [] ? bitmap_get_counter+0x156/0x1fa [ 15.939734] [] blk_plug_device+0x5e/0x97 [ 15.939737] [] bitmap_startwrite+0x12a/0x172 [ 15.939740] [] ? bio_alloc_bioset+0x4b/0x8f [ 15.939744] [] make_request+0x5c3/0x658 [ 15.939748] [] ? up_read+0x9/0xb [ 15.939751] [] generic_make_request+0x1e3/0x21a [ 15.939754] [] ? bvec_alloc_bs+0x81/0xa7 [ 15.939756] [] submit_bio+0x111/0x11a [ 15.939760] [] submit_bh+0xf0/0x114 [ 15.939764] [] __block_write_full_page+0x1c2/0x2ae [ 15.939767] [] ? blkdev_get_block+0x0/0x4d [ 15.939770] [] ? blkdev_get_block+0x0/0x4d [ 15.939773] [] block_write_full_page+0xf2/0xfb [ 15.939779] [] blkdev_writepage+0x13/0x15 [ 15.939783] [] __writepage+0x12/0x2b [ 15.939785] [] write_cache_pages+0x1ae/0x318 [ 15.939787] [] ? __writepage+0x0/0x2b [ 15.939790] [] ? ktime_get_ts+0x49/0x4e [ 15.939793] [] ? ktime_get+0x11/0x42 [ 15.939797] [] ? hrtick_start_fair+0xf3/0x130 [ 15.939800] [] generic_writepages+0x1f/0x25 [ 15.939802] [] do_writepages+0x28/0x37 [ 15.939807] [] __filemap_fdatawrite_range+0x55/0x60 [ 15.939810] [] filemap_fdatawrite+0x1a/0x1c [ 15.939813] [] filemap_write_and_wait+0x19/0x38 [ 15.939816] [] sync_blockdev+0x1b/0x1d [ 15.939818] [] __fsync_super+0x5e/0x6f [ 15.939821] [] fsync_super+0x11/0x21 [ 15.939823] [] do_remount_sb+0x4a/0x194 [ 15.939827] [] do_remount+0x111/0x147 [ 15.939830] [] do_mount+0x147/0x1de [ 15.939833] [] ? handle_mm_fault+0x1f9/0x6e5 [ 15.939835] [] ? __alloc_pages_nodemask+0x9/0xb [ 15.939838] [] ? alloc_pages_current+0x96/0x9f [ 15.939842] [] sys_mount+0x89/0xd5 [ 15.939845] [] ? sys_rt_sigprocmask+0x58/0xd7 [ 15.939848] [] system_call_after_swapgs+0x7b/0x80 [ 15.939850] [ 15.939852] ---[ end trace e14f146f3ea1d407 ]--- [ 16.062362] EXT3 FS on dm-0, internal journal [ 16.277444] kjournald starting. Commit interval 5 seconds [ 16.317276] EXT3 FS on sdb1, internal journal [ 16.317283] EXT3-fs: mounted filesystem with ordered data mode. [ 16.327275] kjournald starting. Commit interval 5 seconds [ 16.327282] EXT3 FS on sdc1, internal journal [ 16.327286] EXT3-fs: mounted filesystem with ordered data mode. [ 16.331850] kjournald starting. Commit interval 5 seconds [ 16.331930] EXT3 FS on sda2, internal journal [ 16.331934] EXT3-fs: mounted filesystem with ordered data mode. [ 16.350289] NTFS volume version 3.1. [ 16.399596] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 16.417552] ISOFS: changing to secondary root [ 16.679349] Adding 506036k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:506036k [ 19.927706] usb 1-1.1.2: link qh1-0e01/ffff88007f808640 start 0 [1/2 us] [ 23.487473] tuner' 0-0043: Cmd VIDIOC_S_STD accepted for analog TV [ 23.487481] tuner' 0-0060: Cmd VIDIOC_S_STD accepted for analog TV [ 23.487484] tuner' 0-0060: tv freq set to 400.00 [ 23.492722] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 23.494897] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 23.499256] tuner' 0-0043: Cmd VIDIOC_S_STD accepted for analog TV [ 23.499263] tuner' 0-0060: Cmd VIDIOC_S_STD accepted for analog TV [ 23.499266] tuner' 0-0060: tv freq set to 400.00 [ 23.505381] tuner' 0-0043: Cmd TUNER_SET_STANDBY accepted for analog TV [ 23.508103] tuner' 0-0060: Cmd TUNER_SET_STANDBY accepted for analog TV [ 23.783747] hda: UDMA/66 mode selected