Linux version 2.6.26-next-20080718 (mako@flyhigh) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 PREEMPT Sat Jul 19 08:14:13 CEST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001df70000 (usable) BIOS-e820: 000000001df70000 - 000000001df7c000 (ACPI data) BIOS-e820: 000000001df7c000 - 000000001df80000 (ACPI NVS) BIOS-e820: 000000001df80000 - 000000001e000000 (reserved) BIOS-e820: 000000002df80000 - 000000002e000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) last_pfn = 0x1df70 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 1df70000 @ 7000-d000 DMI present. ACPI: RSDP 000F6FE0, 0014 (r0 PTLTD ) ACPI: RSDT 1DF774D1, 002C (r1 SONY K7 6040000 LTP 0) ACPI: FACP 1DF7BF64, 0074 (r1 SONY K7 6040000 PTL F4240) ACPI: DSDT 1DF774FD, 4A67 (r1 SONY K7 6040000 MSFT 100000E) ACPI: FACS 1DF7CFC0, 0040 ACPI: BOOT 1DF7BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Sony Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used Entering add_active_range(0, 0x100, 0x1df70) 1 entries of 256 used 479MB LOWMEM available. mapped low ram: 0 - 1df70000 low ram: 00000000 - 1df70000 bootmap 00001000 - 00004bf0 (6 early reservations) ==> bootmem #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00006c4430] TEXT DATA BSS ==> [0000100000 - 00006c4430] #2 [00006c5000 - 00006c8000] INIT_PG_TABLE ==> [00006c5000 - 00006c8000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009f800 for 1024 bytes. Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001df70 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001df70 On node 0 totalpages: 122639 free_area_init_node: node 0, pgdat c0384f80, node_mem_map c1000000 DMA zone: 36 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 Normal zone: 1043 pages used for memmap Normal zone: 117597 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x8008 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffb000 (fee00000) ------------[ cut here ]------------ WARNING: at /home/mako/linux/lkt/sources/linux-next/kernel/lockdep.c:2068 trace_hardirqs_on_caller+0xdc/0x128() Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.26-next-20080718 #1 [] warn_on_slowpath+0x4e/0x68 [] ? init_srcu_struct+0x17/0x3b [] ? release_console_sem+0x1c2/0x1e8 [] ? trace_hardirqs_off+0xb/0xd [] ? _spin_unlock_irqrestore+0x39/0x60 [] ? release_console_sem+0x1d6/0x1e8 [] ? up+0x23/0x30 [] ? release_console_sem+0x1c2/0x1e8 [] ? up+0x23/0x30 [] ? release_console_sem+0x1c2/0x1e8 [] ? __lock_acquire+0x365/0x1151 [] trace_hardirqs_on_caller+0xdc/0x128 [] trace_hardirqs_on+0xb/0xd [] __slab_alloc+0x329/0x61e [] ? kmemcheck_memset+0x24/0xe5 [] kmem_cache_alloc+0xa0/0xb6 [] ? kobject_init+0x3b/0xdd [] ? kobject_init+0x3b/0xdd [] kobject_init+0x3b/0xdd [] firmware_map_add_entry+0x2a/0x4b [] firmware_map_add_early+0x32/0x56 [] e820_reserve_resources+0x10a/0x14e [] setup_arch+0x375/0x540 [] ? clockevents_register_notifier+0x28/0x2d [] ? printk+0x1b/0x1d [] start_kernel+0x67/0x278 [] i386_start_kernel+0x64/0x70 ======================= ---[ end trace 4eaa2a86a8e2da22 ]--- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 2e000000:d1f80000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121560 Kernel command line: root=/dev/hda3 vga=0 video=vesafb:mtrr lapic pci=routeirq rootflags=data=writeback Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 2048 (order: 11, 8192 bytes) TSC calibrated against PM_TIMER Detected 2392.442 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1056 kB per task-struct memory footprint: 1920 bytes Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 479676k/490944k available (1769k kernel code, 10752k reserved, 903k data, 288k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB) vmalloc : 0xde800000 - 0xfffb7000 ( 535 MB) lowmem : 0xc0000000 - 0xddf70000 ( 479 MB) .init : 0xc03a0000 - 0xc03e8000 ( 288 kB) .data : 0xc02ba5ef - 0xc039c5b0 ( 903 kB) .text : 0xc0100000 - 0xc02ba5ef (1769 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4784.88 BogoMIPS (lpj=9569768) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080609 ACPI: setting ELCR to 0200 (from 0c00) kmemcheck: "Bugs, beware!" net_namespace: 296 bytes NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 pci 0000:00:04.0: PME# supported from D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: quirk: region 8000-803f claimed by ali7101 ACPI pci 0000:00:06.0: quirk: region 8040-805f claimed by ali7101 SMB pci 0000:00:0a.0: supports D1 pci 0000:00:0a.0: supports D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0a.1: supports D1 pci 0000:00:0a.1: supports D2 pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold pci 0000:00:0a.2: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0c.1: PME# supported from D0 D3hot D3cold pci 0000:00:0c.1: PME# disabled pci 0000:00:0c.2: PME# supported from D0 D3hot D3cold pci 0000:00:0c.2: PME# disabled pci 0000:00:12.0: supports D1 pci 0000:00:12.0: supports D2 pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:05.0: supports D1 pci 0000:01:05.0: supports D2 bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11) ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:03.0: PCI INT A -> Link[LNK6] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 pci 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10 pci 0000:00:0a.2: PCI INT C -> Link[LNK5] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:0c.1: PCI INT B -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:0c.2: PCI INT C -> Link[LNK5] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:0f.0: can't derive routing for PCI INT A ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 pci 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10 system 00:05: ioport range 0x40b-0x40b has been reserved system 00:05: ioport range 0x480-0x48f has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x4d6-0x4d6 has been reserved system 00:05: ioport range 0x8000-0x807f could not be reserved system 00:05: ioport range 0xfe00-0xfe01 has been reserved system 00:05: ioport range 0xfe10-0xfe11 has been reserved system 00:06: iomem range 0x0-0x9ffff could not be reserved system 00:06: iomem range 0xdc000-0xdffff could not be reserved system 00:06: iomem range 0xe0000-0xfffff could not be reserved system 00:06: iomem range 0x100000-0x1dffffff could not be reserved system 00:06: iomem range 0xfff80000-0xffffffff could not be reserved system 00:06: iomem range 0xf0800000-0xf0800fff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xa000-0xafff pci 0000:00:01.0: MEM window: 0xf0500000-0xf05fffff pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0x001000-0x0010ff pci 0000:00:0a.0: IO window: 0x001400-0x0014ff pci 0000:00:0a.0: PREFETCH window: 0x30000000-0x33ffffff pci 0000:00:0a.0: MEM window: 0x34000000-0x37ffffff pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06 pci 0000:00:0a.1: IO window: 0x001800-0x0018ff pci 0000:00:0a.1: IO window: 0x001c00-0x001cff pci 0000:00:0a.1: PREFETCH window: 0x38000000-0x3bffffff pci 0000:00:0a.1: MEM window: 0x3c000000-0x3fffffff pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:0a.1: PCI INT B -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 7, 524288 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. msgmni has been set to 937 io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:07.0: Activating ISA DMA hang workarounds pci 0000:01:05.0: Boot video device ACPI: AC Adapter [ACAD] (on-line) ACPI: EC: GPE storm detected, disabling EC GPE Switched to high resolution mode on CPU 0 ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PBTN] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID] ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ01] (49 C) console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver alim15x3 0000:00:0f.0: IDE controller (0x10b9:0x5229 rev 0xc4) ALI15x3_IDE 0000:00:0f.0: can't derive routing for PCI INT A alim15x3 0000:00:0f.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x80c0-0x80c7 ide1: BM-DMA at 0x80c8-0x80cf Probing IDE interface ide0... hda: HITACHI_DK23EA-30, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Marking TSC unstable due to TSC halts in idle input: AT Translated Set 2 keyboard as /class/input/input3 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 288k freed input: PC Speaker as /class/input/input4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 agpgart: Detected Ati IGP345M chipset agpgart: AGP aperture is 64M @ 0xf4000000 sony-laptop: Sony Notebook Control Driver v0.6. input: Sony Vaio Keys as /class/input/input5 input: Sony Vaio Jogdial as /class/input/input6 input: PS/2 Mouse as /class/input/input7 input: AlpsPS/2 ALPS GlidePoint as /class/input/input8 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 8139too Fast Ethernet driver 0.9.28 8139too 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xde862c00, 08:00:46:a8:48:d3, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158] Yenta: ISA IRQ mask 0x04a8, PCI irq 11 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158] Yenta: ISA IRQ mask 0x00a8, PCI irq 10 Socket status: 30000006 ALI 5451 0000:00:04.0: power state changed by ACPI to D0 ALI 5451 0000:00:04.0: PCI INT A -> Link[LNK7] -> GSI 11 (level, low) -> IRQ 11 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 AC'97 1 does not respond - RESET AC'97 1 access is not valid [0xffffffff], removing mixer. ali mixer 1 creating error. uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:0c.0: UHCI Host Controller uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNK5] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:0c.2: EHCI Host Controller ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0c.2: irq 10, io mem 0xf0404800 ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNK4] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:0c.1: UHCI Host Controller uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected EXT3 FS on hda3, internal journal eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 hda: UDMA/100 mode selected hdc: UDMA/33 mode selected RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [drm] Initialized drm 1.1.0 20060810 pci 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.29.0 20080528 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode [drm] Setting GART location based on old memory map [drm] Loading R100 Microcode [drm] writeback test succeeded in 1 usecs agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode [drm] Loading R100 Microcode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode [drm] Loading R100 Microcode