| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080721195432.GA7107@elte.hu>
Date: Mon, 21 Jul 2008 21:54:32 +0200
From: Ingo Molnar <mingo@...e.hu>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: Re: [git pull] x86 updates for v2.6.27, phase #2
* Linus Torvalds <torvalds@...ux-foundation.org> wrote:
> On Mon, 21 Jul 2008, Ingo Molnar wrote:
> >
> > i'll fix it ... Dprintk in apic.h is historic and ugly. Should i
> > redo the tree and the pull request?
>
> I already pulled it, so please just send a (tested) patch. But it
> would have ben _so_ much better to have noticed this before-the-fact.
yeah, sorry about that. Thomas has fixed up that old mess and i've
tested it, please pull the fix from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-fixes-for-linus
Thanks,
Ingo
------------------>
Thomas Gleixner (1):
x86: convert Dprintk to pr_debug
arch/x86/kernel/acpi/boot.c | 6 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 4 +-
arch/x86/kernel/setup_percpu.c | 6 +-
arch/x86/kernel/smpboot.c | 52 +++++++++++++-------------
arch/x86/mm/numa_64.c | 4 --
arch/x86/pci/early.c | 16 +++----
include/asm-x86/apic.h | 2 -
include/asm-x86/mach-default/smpboot_hooks.h | 6 +-
8 files changed, 44 insertions(+), 52 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index f489d7a..fa88a1d 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1021,7 +1021,7 @@ void __init mp_config_acpi_legacy_irqs(void)
mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
#endif
set_bit(MP_ISA_BUS, mp_bus_not_pci);
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+ pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
#ifdef CONFIG_X86_ES7000
/*
@@ -1127,8 +1127,8 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
return gsi;
}
if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+ pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+ mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
#ifdef CONFIG_X86_32
return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
#else
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 6d4bdc0..de7439f 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -250,7 +250,7 @@ static void write_watchdog_counter(unsigned int perfctr_msr,
do_div(count, nmi_hz);
if(descr)
- Dprintk("setting %s to -0x%08Lx\n", descr, count);
+ pr_debug("setting %s to -0x%08Lx\n", descr, count);
wrmsrl(perfctr_msr, 0 - count);
}
@@ -261,7 +261,7 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
do_div(count, nmi_hz);
if(descr)
- Dprintk("setting %s to -0x%08Lx\n", descr, count);
+ pr_debug("setting %s to -0x%08Lx\n", descr, count);
wrmsr(perfctr_msr, (u32)(-count), 0);
}
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index cac6843..f7745f9 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -227,8 +227,8 @@ static void __init setup_node_to_cpumask_map(void)
/* allocate the map */
map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
- Dprintk(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
- map, nr_node_ids);
+ pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+ map, nr_node_ids);
/* node_to_cpumask() will now work */
node_to_cpumask_map = map;
@@ -248,7 +248,7 @@ void __cpuinit numa_set_node(int cpu, int node)
per_cpu(x86_cpu_to_node_map, cpu) = node;
else
- Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu);
+ pr_debug("Setting node for non-present cpu %d\n", cpu);
}
void __cpuinit numa_clear_node(int cpu)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2764019..4b53a64 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -216,7 +216,7 @@ static void __cpuinit smp_callin(void)
panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
phys_id, cpuid);
}
- Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+ pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
/*
* STARTUP IPIs are fragile beasts as they might sometimes
@@ -251,7 +251,7 @@ static void __cpuinit smp_callin(void)
* boards)
*/
- Dprintk("CALLIN, before setup_local_APIC().\n");
+ pr_debug("CALLIN, before setup_local_APIC().\n");
smp_callin_clear_local_apic();
setup_local_APIC();
end_local_APIC_setup();
@@ -266,7 +266,7 @@ static void __cpuinit smp_callin(void)
local_irq_enable();
calibrate_delay();
local_irq_disable();
- Dprintk("Stack at about %p\n", &cpuid);
+ pr_debug("Stack at about %p\n", &cpuid);
/*
* Save our processor parameters
@@ -513,7 +513,7 @@ static void impress_friends(void)
/*
* Allow the user to impress friends.
*/
- Dprintk("Before bogomips.\n");
+ pr_debug("Before bogomips.\n");
for_each_possible_cpu(cpu)
if (cpu_isset(cpu, cpu_callout_map))
bogosum += cpu_data(cpu).loops_per_jiffy;
@@ -523,7 +523,7 @@ static void impress_friends(void)
bogosum/(500000/HZ),
(bogosum/(5000/HZ))%100);
- Dprintk("Before bogocount - setting activated=1.\n");
+ pr_debug("Before bogocount - setting activated=1.\n");
}
static inline void __inquire_remote_apic(int apicid)
@@ -585,7 +585,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
/* Kick the second */
apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
- Dprintk("Waiting for send to finish...\n");
+ pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
/*
@@ -596,7 +596,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
accept_status = (apic_read(APIC_ESR) & 0xEF);
- Dprintk("NMI sent.\n");
+ pr_debug("NMI sent.\n");
if (send_status)
printk(KERN_ERR "APIC never delivered???\n");
@@ -631,7 +631,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
apic_read(APIC_ESR);
}
- Dprintk("Asserting INIT.\n");
+ pr_debug("Asserting INIT.\n");
/*
* Turn INIT on target chip
@@ -644,12 +644,12 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
apic_write(APIC_ICR,
APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
- Dprintk("Waiting for send to finish...\n");
+ pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
mdelay(10);
- Dprintk("Deasserting INIT.\n");
+ pr_debug("Deasserting INIT.\n");
/* Target chip */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
@@ -657,7 +657,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
/* Send IPI */
apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
- Dprintk("Waiting for send to finish...\n");
+ pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
mb();
@@ -684,14 +684,14 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
/*
* Run STARTUP IPI loop.
*/
- Dprintk("#startup loops: %d.\n", num_starts);
+ pr_debug("#startup loops: %d.\n", num_starts);
for (j = 1; j <= num_starts; j++) {
- Dprintk("Sending STARTUP #%d.\n", j);
+ pr_debug("Sending STARTUP #%d.\n", j);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
- Dprintk("After apic_write.\n");
+ pr_debug("After apic_write.\n");
/*
* STARTUP IPI
@@ -709,9 +709,9 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
*/
udelay(300);
- Dprintk("Startup point 1.\n");
+ pr_debug("Startup point 1.\n");
- Dprintk("Waiting for send to finish...\n");
+ pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
/*
@@ -724,7 +724,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
if (send_status || accept_status)
break;
}
- Dprintk("After Startup.\n");
+ pr_debug("After Startup.\n");
if (send_status)
printk(KERN_ERR "APIC never delivered???\n");
@@ -875,7 +875,7 @@ do_rest:
if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
- Dprintk("Setting warm reset code and vector.\n");
+ pr_debug("Setting warm reset code and vector.\n");
store_NMI_vector(&nmi_high, &nmi_low);
@@ -896,9 +896,9 @@ do_rest:
/*
* allow APs to start initializing.
*/
- Dprintk("Before Callout %d.\n", cpu);
+ pr_debug("Before Callout %d.\n", cpu);
cpu_set(cpu, cpu_callout_map);
- Dprintk("After Callout %d.\n", cpu);
+ pr_debug("After Callout %d.\n", cpu);
/*
* Wait 5s total for a response
@@ -911,10 +911,10 @@ do_rest:
if (cpu_isset(cpu, cpu_callin_map)) {
/* number CPUs logically, starting from 1 (BSP is 0) */
- Dprintk("OK.\n");
+ pr_debug("OK.\n");
printk(KERN_INFO "CPU%d: ", cpu);
print_cpu_info(&cpu_data(cpu));
- Dprintk("CPU has booted.\n");
+ pr_debug("CPU has booted.\n");
} else {
boot_error = 1;
if (*((volatile unsigned char *)trampoline_base)
@@ -959,7 +959,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
WARN_ON(irqs_disabled());
- Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu);
+ pr_debug("++++++++++++++++++++=_---CPU UP %u\n", cpu);
if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
!physid_isset(apicid, phys_cpu_present_map)) {
@@ -971,7 +971,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
* Already booted CPU?
*/
if (cpu_isset(cpu, cpu_callin_map)) {
- Dprintk("do_boot_cpu %d Already started\n", cpu);
+ pr_debug("do_boot_cpu %d Already started\n", cpu);
return -ENOSYS;
}
@@ -998,7 +998,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
err = do_boot_cpu(apicid, cpu);
#endif
if (err) {
- Dprintk("do_boot_cpu failed %d\n", err);
+ pr_debug("do_boot_cpu failed %d\n", err);
return -EIO;
}
@@ -1202,7 +1202,7 @@ void __init native_smp_prepare_boot_cpu(void)
void __init native_smp_cpus_done(unsigned int max_cpus)
{
- Dprintk("Boot done.\n");
+ pr_debug("Boot done.\n");
impress_friends();
smp_checks();
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index b432d57..9782f42 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -20,10 +20,6 @@
#include <asm/acpi.h>
#include <asm/k8.h>
-#ifndef Dprintk
-#define Dprintk(x...)
-#endif
-
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 858dbe3..86631cc 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -7,15 +7,13 @@
/* Direct PCI access. This is used for PCI accesses in early boot before
the PCI subsystem works. */
-#define PDprintk(x...)
-
u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
{
u32 v;
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
v = inl(0xcfc);
if (v != 0xffffffff)
- PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+ pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
return v;
}
@@ -24,7 +22,7 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
u8 v;
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
v = inb(0xcfc + (offset&3));
- PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+ pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
return v;
}
@@ -33,28 +31,28 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
u16 v;
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
v = inw(0xcfc + (offset&2));
- PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+ pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
return v;
}
void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
u32 val)
{
- PDprintk("%x writing to %x: %x\n", slot, offset, val);
+ pr_debug("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outl(val, 0xcfc);
}
void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
{
- PDprintk("%x writing to %x: %x\n", slot, offset, val);
+ pr_debug("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outb(val, 0xcfc + (offset&3));
}
void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
{
- PDprintk("%x writing to %x: %x\n", slot, offset, val);
+ pr_debug("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outw(val, 0xcfc + (offset&2));
}
@@ -71,7 +69,7 @@ void early_dump_pci_device(u8 bus, u8 slot, u8 func)
int j;
u32 val;
- printk("PCI: %02x:%02x:%02x", bus, slot, func);
+ printk(KERN_INFO "PCI: %02x:%02x:%02x", bus, slot, func);
for (i = 0; i < 256; i += 4) {
if (!(i & 0x0f))
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
index b96460a..133c998 100644
--- a/include/asm-x86/apic.h
+++ b/include/asm-x86/apic.h
@@ -12,8 +12,6 @@
#define ARCH_APICTIMER_STOPS_ON_C3 1
-#define Dprintk printk
-
/*
* Debugging macros
*/
diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h
index 56d001b..dbab36d 100644
--- a/include/asm-x86/mach-default/smpboot_hooks.h
+++ b/include/asm-x86/mach-default/smpboot_hooks.h
@@ -12,11 +12,11 @@ static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
{
CMOS_WRITE(0xa, 0xf);
local_flush_tlb();
- Dprintk("1.\n");
+ pr_debug("1.\n");
*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
- Dprintk("2.\n");
+ pr_debug("2.\n");
*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
- Dprintk("3.\n");
+ pr_debug("3.\n");
}
static inline void smpboot_restore_warm_reset_vector(void)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists