| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20080722211250.20478.35402.sendpatchset@localhost.localdomain>
Date: Tue, 22 Jul 2008 23:12:50 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/10] ide: remove drive->driveid
* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling
to ide_get_identity_ioctl().
* Use temporary buffer in ide_get_identity_ioctl() instead
of accessing drive->id directly.
* Add ide_id_to_hd_driveid() inline to convert raw id into
struct hd_driveid format (needed on big-endian).
* Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(),
cleanup ide_fix_driveid() and switch ide to use use raw id.
* Remove no longer needed drive->driveid.
This leaves us with 3 users of struct hd_driveid in tree:
- arch/um/drivers/ubd_kern.c
- drivers/block/xsysace.c
- drivers/usb/storage/isd200.c
While at it:
* Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ide/ide-disk.c | 23 +++++++--------
drivers/ide/ide-dma.c | 6 ++--
drivers/ide/ide-iops.c | 20 +------------
drivers/ide/ide-lib.c | 4 +-
drivers/ide/ide-probe.c | 22 +++++++--------
drivers/ide/ide-timings.c | 2 -
drivers/ide/ide.c | 59 +++++++++++++++++++++++++++++++++++------
drivers/ide/legacy/qd65xx.c | 4 +-
drivers/ide/pci/cs5530.c | 2 -
drivers/ide/pci/it821x.c | 4 +-
drivers/ide/pci/pdc202xx_old.c | 2 -
drivers/ide/pci/sc1200.c | 2 -
include/linux/ide.h | 9 +-----
13 files changed, 90 insertions(+), 69 deletions(-)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -94,13 +94,14 @@ static void ide_disk_put(struct ide_disk
*/
static int lba_capacity_is_ok(u16 *id)
{
- struct hd_driveid *driveid = (struct hd_driveid *)id;
unsigned long lba_sects, chs_sects, head, tail;
/* No non-LBA info .. so valid! */
if (id[ATA_ID_CYLS] == 0)
return 1;
+ lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
+
/*
* The ATA spec tells large drives to return
* C/H/S = 16383/16/63 independent of their size.
@@ -111,10 +112,9 @@ static int lba_capacity_is_ok(u16 *id)
(id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) &&
id[ATA_ID_SECTORS] == 63 &&
(id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) &&
- (driveid->lba_capacity >= 16383 * 63 * id[ATA_ID_HEADS]))
+ (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS]))
return 1;
- lba_sects = driveid->lba_capacity;
chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS];
/* perform a rough sanity check on lba_sects: within 10% is OK */
@@ -126,7 +126,7 @@ static int lba_capacity_is_ok(u16 *id)
tail = (lba_sects & 0xffff);
lba_sects = (head | (tail << 16));
if ((lba_sects - chs_sects) < chs_sects/10) {
- driveid->lba_capacity = lba_sects;
+ *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects);
return 1; /* lba_capacity is (now) good */
}
@@ -396,7 +396,7 @@ static inline int idedisk_supports_lba48
{
return (id[ATA_ID_COMMAND_SET_2] & 0x0400) &&
(id[ATA_ID_CFS_ENABLE_2] & 0x0400) &&
- ((struct hd_driveid *)id)->lba_capacity_2;
+ ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
}
/*
@@ -463,7 +463,6 @@ static void idedisk_check_hpa(ide_drive_
*/
static void init_idedisk_capacity(ide_drive_t *drive)
{
- struct hd_driveid *driveid = drive->driveid;
u16 *id = drive->id;
/*
* If this drive supports the Host Protected Area feature set,
@@ -474,13 +473,13 @@ static void init_idedisk_capacity(ide_dr
if (idedisk_supports_lba48(id)) {
/* drive speaks 48-bit LBA */
drive->select.b.lba = 1;
- drive->capacity64 = driveid->lba_capacity_2;
+ drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
if (hpa)
idedisk_check_hpa(drive);
- } else if ((driveid->capability & 2) && lba_capacity_is_ok(id)) {
+ } else if (ata_id_has_lba(id) && lba_capacity_is_ok(id)) {
/* drive speaks 28-bit LBA */
drive->select.b.lba = 1;
- drive->capacity64 = driveid->lba_capacity;
+ drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
if (hpa)
idedisk_check_hpa(drive);
} else {
@@ -629,7 +628,7 @@ static int set_multcount(ide_drive_t *dr
struct request *rq;
int error;
- if (arg < 0 || arg > drive->driveid->max_multsect)
+ if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
return -EINVAL;
if (drive->special.b.set_multmode)
@@ -782,8 +781,8 @@ static void idedisk_add_settings(ide_dri
ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1,
&drive->addressing, set_lba_addressing);
ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0,
- drive->driveid->max_multsect, 1, 1, &drive->mult_count,
- set_multcount);
+ drive->id[ATA_ID_MAX_MULTSECT] & 0xff, 1, 1,
+ &drive->mult_count, set_multcount);
ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
&drive->nowerr, set_nowerr);
ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1,
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -649,8 +649,8 @@ static unsigned int ide_get_mode_mask(id
case XFER_SW_DMA_0:
if (id[ATA_ID_FIELD_VALID] & 2) {
mask = id[ATA_ID_SWDMA_MODES] & hwif->swdma_mask;
- } else if (drive->driveid->tDMA) {
- u8 mode = drive->driveid->tDMA;
+ } else if (id[ATA_ID_OLD_DMA_MODES] >> 8) {
+ u8 mode = id[ATA_ID_OLD_DMA_MODES] >> 8;
/*
* if the mode is valid convert it to the mask
@@ -727,7 +727,7 @@ static int ide_tune_dma(ide_drive_t *dri
ide_hwif_t *hwif = drive->hwif;
u8 speed;
- if (drive->nodma || (drive->driveid->capability & 1) == 0)
+ if (drive->nodma || ata_id_has_dma(drive->id) == 0)
return 0;
/* consult the list of known "bad" drives */
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -404,26 +404,10 @@ void ide_fix_driveid(u16 *id)
{
#ifndef __LITTLE_ENDIAN
# ifdef __BIG_ENDIAN
- struct hd_driveid *driveid = (struct hd_driveid *)id;
int i;
- for (i = 0; i < 256; i++) {
- /* these words are accessed as two 8-bit values */
- if (i == 47 || i == 49 || i == 51 || i == 52 || i == 59)
- continue;
- if (i == 60 || i == 61) /* ->lba_capacity is 32-bit */
- continue;
- if (i == 98 || i == 99) /* ->spg is 32-bit */
- continue;
- if (i > 99 && i < 104) /* ->lba_capacity_2 is 64-bit */
- continue;
-
+ for (i = 0; i < 256; i++)
id[i] = __le16_to_cpu(id[i]);
- }
-
- driveid->lba_capacity = __le32_to_cpu(driveid->lba_capacity);
- driveid->spg = __le32_to_cpu(driveid->spg);
- driveid->lba_capacity_2 = __le64_to_cpu(driveid->lba_capacity_2);
# else
# error "Please fix <asm/byteorder.h>"
# endif
@@ -752,7 +736,7 @@ int ide_config_drive_speed(ide_drive_t *
#endif
/* Skip setting PIO flow-control modes on pre-EIDE drives */
- if ((speed & 0xf8) == XFER_PIO_0 && !(drive->driveid->capability & 8))
+ if ((speed & 0xf8) == XFER_PIO_0 && ata_id_has_iordy(drive->id) == 0)
goto skip;
/*
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -102,14 +102,14 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
if (pio_mode != -1) {
printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
} else {
- pio_mode = drive->driveid->tPIO;
+ pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8;
if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
pio_mode = 2;
overridden = 1;
}
if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */
- if (drive->driveid->capability & 8) { /* IORDY sup? */
+ if (ata_id_has_iordy(id)) {
if (id[ATA_ID_PIO_MODES] & 7) {
overridden = 0;
if (id[ATA_ID_PIO_MODES] & 4)
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -87,20 +87,20 @@ static void ide_disk_init_chs(ide_drive_
static void ide_disk_init_mult_count(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->driveid;
+ u16 *id = drive->id;
+ u8 max_multsect = id[ATA_ID_MAX_MULTSECT] & 0xff;
- if (id->max_multsect) {
+ if (max_multsect) {
#ifdef CONFIG_IDEDISK_MULTI_MODE
- if ((id->max_multsect / 2) > 1) {
- id->multsect = id->max_multsect;
- id->multsect_valid = 1;
- } else {
- id->multsect = 0;
- id->multsect_valid = 0;
- }
- drive->mult_req = id->multsect;
+ if ((max_multsect / 2) > 1)
+ id[ATA_ID_MULTSECT] = max_multsect | 0x100;
+ else
+ id[ATA_ID_MULTSECT] &= ~0x1ff;
+
+ drive->mult_req = id[ATA_ID_MULTSECT] & 0xff;
#endif
- if ((id->multsect_valid & 1) && id->multsect)
+ if ((id[ATA_ID_MULTSECT] & 0x100) &&
+ (id[ATA_ID_MULTSECT] & 0xff))
drive->special.b.set_multmode = 1;
}
}
Index: b/drivers/ide/ide-timings.c
===================================================================
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -83,7 +83,7 @@ u16 ide_pio_cycle_time(ide_drive_t *driv
u16 cycle = 0;
if (id[ATA_ID_FIELD_VALID] & 2) {
- if (drive->driveid->capability & 8)
+ if (ata_id_has_iordy(drive->id))
cycle = id[ATA_ID_EIDE_PIO_IORDY];
else
cycle = id[ATA_ID_EIDE_PIO];
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -328,7 +328,7 @@ int set_using_dma(ide_drive_t *drive, in
if (arg < 0 || arg > 1)
return -EINVAL;
- if ((drive->driveid->capability & 1) == 0)
+ if (ata_id_has_dma(drive->id) == 0)
goto out;
if (hwif->dma_ops == NULL)
@@ -502,12 +502,60 @@ static int generic_drive_reset(ide_drive
return ret;
}
+static inline void ide_id_to_hd_driveid(u16 *id)
+{
+#ifdef __BIG_ENDIAN
+ /* accessed in struct hd_driveid as 8-bit values */
+ id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]);
+ id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]);
+ id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]);
+ id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]);
+ id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]);
+
+ /* as 32-bit values */
+ *(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
+ *(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG);
+
+ /* as 64-bit value */
+ *(u64 *)&id[ATA_ID_LBA_CAPACITY_2] =
+ ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
+#endif
+}
+
+static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd,
+ unsigned long arg)
+{
+ u16 *id = NULL;
+ int size = (cmd == HDIO_GET_IDENTITY) ? (ATA_ID_WORDS * 2) : 142;
+ int rc = 0;
+
+ if (drive->id_read == 0) {
+ rc = -ENOMSG;
+ goto out;
+ }
+
+ id = kmalloc(size, GFP_KERNEL);
+ if (id == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(id, drive->id, size);
+ ide_id_to_hd_driveid(id);
+
+ if (copy_to_user((void __user *)arg, id, size))
+ rc = -EFAULT;
+
+ kfree(id);
+out:
+ return rc;
+}
+
int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
unsigned int cmd, unsigned long arg)
{
unsigned long flags;
ide_driver_t *drv;
- void __user *p = (void __user *)arg;
int err = 0, (*setfunc)(ide_drive_t *, int);
u8 *val;
@@ -528,12 +576,7 @@ int generic_ide_ioctl(ide_drive_t *drive
case HDIO_GET_IDENTITY:
if (bdev != bdev->bd_contains)
return -EINVAL;
- if (drive->id_read == 0)
- return -ENOMSG;
- if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
- return -EFAULT;
- return 0;
-
+ return ide_get_identity_ioctl(drive, cmd, arg);
case HDIO_GET_NICE:
return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP |
drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP |
Index: b/drivers/ide/legacy/qd65xx.c
===================================================================
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -195,10 +195,10 @@ static void qd6500_set_pio_mode(ide_driv
* FIXME: use "pio" value
*/
if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
- drive->driveid->tPIO && (id[ATA_ID_FIELD_VALID] & 2) &&
+ (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
id[ATA_ID_EIDE_PIO] >= 240) {
printk(KERN_INFO "%s: PIO mode%d\n", drive->name,
- drive->driveid->tPIO);
+ id[ATA_ID_OLD_PIO_MODES] & 0xff);
active_time = 110;
recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120;
}
Index: b/drivers/ide/pci/cs5530.c
===================================================================
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -88,7 +88,7 @@ static u8 cs5530_udma_filter(ide_drive_t
if (mate->present == 0)
goto out;
- if ((mate->driveid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
(mateid[ATA_ID_UDMA_MODES] & 7))
goto out;
Index: b/drivers/ide/pci/it821x.c
===================================================================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -470,7 +470,7 @@ static void __devinit it821x_quirkproc(i
/* In raid mode the ident block is slightly buggy
We need to set the bits so that the IDE layer knows
LBA28. LBA48 and DMA ar valid */
- drive->driveid->capability |= 3; /* LBA28, DMA */
+ id[ATA_ID_CAPABILITY] |= (3 << 8); /* LBA28, DMA */
id[ATA_ID_COMMAND_SET_2] |= 0x0400; /* LBA48 valid */
id[ATA_ID_CFS_ENABLE_2] |= 0x0400; /* LBA48 on */
/* Reporting logic */
@@ -504,7 +504,7 @@ static void __devinit it821x_quirkproc(i
* IDE core that DMA is supported (it821x hardware
* takes care of DMA mode programming).
*/
- if (drive->driveid->capability & 1) {
+ if (ata_id_has_dma(id)) {
id[ATA_ID_MWDMA_MODES] |= 0x0101;
drive->current_speed = XFER_MW_DMA_0;
}
Index: b/drivers/ide/pci/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -86,7 +86,7 @@ static void pdc202xx_set_mode(ide_drive_
* Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
*/
AP &= ~0x3f;
- if (drive->driveid->capability & 4)
+ if (ata_id_iordy_disable(drive->id))
AP |= 0x20; /* set IORDY_EN bit */
if (drive->media == ide_disk)
AP |= 0x10; /* set Prefetch_EN bit */
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -111,7 +111,7 @@ static u8 sc1200_udma_filter(ide_drive_t
if (mate->present == 0)
goto out;
- if ((mate->driveid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
(mateid[ATA_ID_UDMA_MODES] & 7))
goto out;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -389,11 +389,7 @@ struct ide_drive_s {
struct request *rq; /* current request */
struct ide_drive_s *next; /* circular list of hwgroup drives */
void *driver_data; /* extra driver data */
- union {
- /* identification info */
- struct hd_driveid *driveid;
- u16 *id;
- };
+ u16 *id; /* identification info */
#ifdef CONFIG_IDE_PROC_FS
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
struct ide_settings_s *settings;/* /proc/ide/ drive settings */
@@ -1353,8 +1349,7 @@ extern int ide_set_xfer_rate(ide_drive_t
static inline int ide_dev_has_iordy(u16 *id)
{
- return ((id[ATA_ID_FIELD_VALID] & 2) &&
- (((struct hd_driveid *)id)->capability & 8)) ? 1 : 0;
+ return ((id[ATA_ID_FIELD_VALID] & 2) && ata_id_has_iordy(id)) ? 1 : 0;
}
static inline int ide_dev_is_sata(u16 *id)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists