lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 28 Jul 2008 10:37:31 -0700
From:	Randy Dunlap <randy.dunlap@...cle.com>
To:	"Robert P. J. Day" <rpjday@...shcourse.ca>
Cc:	Calvin Walton <calvin.walton@...il.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Andrew Morton <akpm@...l.org>
Subject: Re: [PATCH] FILESYSTEMS: Make "advanced partitions" immediately
 unselectable.


>   yes, it's nitpicking but, as it's laid out right now, it's
> unnecessarily confusing and inconsistent.  but i don't know if there's
> a trivial fix for it.

Yes, I'd call MSDOS partitions basic, not Advanced, and then put all others
under an Advanced menu that can be toggled on/off easily with menuconfig.

Not quite trivial, but not messy either.

Patch below.  Comments?
---

From: Randy Dunlap <randy.dunlap@...cle.com>

Use "menuconfig" to allow all advanced partitions to be deselectable
from the FS partitions menu.
However, leave MSDOS_PARTITION as a basic partition type (i.e.,
not advanced), so that its "default y" remains in effect.

Signed-off-by: Randy Dunlap <randy.dunlap@...cle.com>
---

 fs/Kconfig            |    6 ----
 fs/partitions/Kconfig |   72 ++++++++++++++++++++++++++++----------------------
 2 files changed, 41 insertions(+), 37 deletions(-)

--- lin2626-g9-kerndoc.orig/fs/Kconfig
+++ lin2626-g9-kerndoc/fs/Kconfig
@@ -2142,14 +2142,8 @@ config 9P_FS
 
 endif # NETWORK_FILESYSTEMS
 
-if BLOCK
-menu "Partition Types"
-
 source "fs/partitions/Kconfig"
 
-endmenu
-endif
-
 source "fs/nls/Kconfig"
 source "fs/dlm/Kconfig"
 
--- lin2626-g9-kerndoc.orig/fs/partitions/Kconfig
+++ lin2626-g9-kerndoc/fs/partitions/Kconfig
@@ -1,8 +1,19 @@
 #
 # Partition configuration
 #
-config PARTITION_ADVANCED
-	bool "Advanced partition selection"
+
+if BLOCK
+
+menu "Partition types"
+
+config MSDOS_PARTITION
+	bool "PC BIOS (MSDOS partition tables) support"
+	default y
+	help
+	  Say Y here.
+
+menuconfig PARTITION_ADVANCED
+	bool "Advanced partition support"
 	help
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned under an operating system running on a different
@@ -14,14 +25,16 @@ config PARTITION_ADVANCED
 
 	  If unsure, say N.
 
+if PARTITION_ADVANCED
+
 config ACORN_PARTITION
-	bool "Acorn partition support" if PARTITION_ADVANCED
+	bool "Acorn partition support"
 	default y if ARCH_ACORN
 	help
 	  Support hard disks partitioned under Acorn operating systems.
 
 config ACORN_PARTITION_CUMANA
-	bool "Cumana partition support" if PARTITION_ADVANCED
+	bool "Cumana partition support"
 	default y if ARCH_ACORN
 	depends on ACORN_PARTITION
 	help
@@ -29,12 +42,12 @@ config ACORN_PARTITION_CUMANA
 	  were partitioned using the Cumana interface on Acorn machines.
 
 config ACORN_PARTITION_EESOX
-	bool "EESOX partition support" if PARTITION_ADVANCED
+	bool "EESOX partition support"
 	default y if ARCH_ACORN
 	depends on ACORN_PARTITION
 
 config ACORN_PARTITION_ICS
-	bool "ICS partition support" if PARTITION_ADVANCED
+	bool "ICS partition support"
 	default y if ARCH_ACORN
 	depends on ACORN_PARTITION
 	help
@@ -42,7 +55,7 @@ config ACORN_PARTITION_ICS
 	  were partitioned using the ICS interface on Acorn machines.
 
 config ACORN_PARTITION_ADFS
-	bool "Native filecore partition support" if PARTITION_ADVANCED
+	bool "Native filecore partition support"
 	default y if ARCH_ACORN
 	depends on ACORN_PARTITION
 	help
@@ -52,7 +65,7 @@ config ACORN_PARTITION_ADFS
 	  `Y' here, Linux will support disk partitions created under ADFS.
 
 config ACORN_PARTITION_POWERTEC
-	bool "PowerTec partition support" if PARTITION_ADVANCED
+	bool "PowerTec partition support"
 	default y if ARCH_ACORN
 	depends on ACORN_PARTITION
 	help
@@ -60,7 +73,7 @@ config ACORN_PARTITION_POWERTEC
 	  the PowerTec SCSI drive.
 
 config ACORN_PARTITION_RISCIX
-	bool "RISCiX partition support" if PARTITION_ADVANCED
+	bool "RISCiX partition support"
 	default y if ARCH_ACORN
 	depends on ACORN_PARTITION
 	help
@@ -69,21 +82,21 @@ config ACORN_PARTITION_RISCIX
 	  to read disks partitioned under RISCiX.
 
 config OSF_PARTITION
-	bool "Alpha OSF partition support" if PARTITION_ADVANCED
+	bool "Alpha OSF partition support"
 	default y if ALPHA
 	help
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned on an Alpha machine.
 
 config AMIGA_PARTITION
-	bool "Amiga partition table support" if PARTITION_ADVANCED
+	bool "Amiga partition table support"
 	default y if (AMIGA || AFFS_FS=y)
 	help
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned under AmigaOS.
 
 config ATARI_PARTITION
-	bool "Atari partition table support" if PARTITION_ADVANCED
+	bool "Atari partition table support"
 	default y if ATARI
 	help
 	  Say Y here if you would like to use hard disks under Linux which
@@ -91,28 +104,22 @@ config ATARI_PARTITION
 
 config IBM_PARTITION
 	bool "IBM disk label and partition support"
-	depends on PARTITION_ADVANCED && S390
+	depends on S390
 	help
 	  Say Y here if you would like to be able to read the hard disk
 	  partition table format used by IBM DASD disks operating under CMS.
 	  Otherwise, say N.
 
 config MAC_PARTITION
-	bool "Macintosh partition map support" if PARTITION_ADVANCED
+	bool "Macintosh partition map support"
 	default y if (MAC || PPC_PMAC)
 	help
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned on a Macintosh.
 
-config MSDOS_PARTITION
-	bool "PC BIOS (MSDOS partition tables) support" if PARTITION_ADVANCED
-	default y
-	help
-	  Say Y here.
-
 config BSD_DISKLABEL
 	bool "BSD disklabel (FreeBSD partition tables) support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	depends on MSDOS_PARTITION
 	help
 	  FreeBSD uses its own hard disk partition scheme on your PC. It
 	  requires only one entry in the primary partition table of your disk
@@ -125,7 +132,7 @@ config BSD_DISKLABEL
 
 config MINIX_SUBPARTITION
 	bool "Minix subpartition support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	depends on MSDOS_PARTITION
 	help
 	  Minix 2.0.0/2.0.2 subpartition table support for Linux.
 	  Say Y here if you want to mount and use Minix 2.0.0/2.0.2
@@ -133,7 +140,7 @@ config MINIX_SUBPARTITION
 
 config SOLARIS_X86_PARTITION
 	bool "Solaris (x86) partition table support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	depends on MSDOS_PARTITION
 	help
 	  Like most systems, Solaris x86 uses its own hard disk partition
 	  table format, incompatible with all others. Saying Y here allows you
@@ -143,7 +150,7 @@ config SOLARIS_X86_PARTITION
 
 config UNIXWARE_DISKLABEL
 	bool "Unixware slices support"
-	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	depends on MSDOS_PARTITION
 	---help---
 	  Like some systems, UnixWare uses its own slice table inside a
 	  partition (VTOC - Virtual Table of Contents). Its format is
@@ -163,7 +170,6 @@ config UNIXWARE_DISKLABEL
 
 config LDM_PARTITION
 	bool "Windows Logical Disk Manager (Dynamic Disk) support"
-	depends on PARTITION_ADVANCED
 	---help---
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned using Windows 2000's/XP's or Vista's Logical Disk
@@ -197,14 +203,14 @@ config LDM_DEBUG
 	  If unsure, say N.
 
 config SGI_PARTITION
-	bool "SGI partition support" if PARTITION_ADVANCED
+	bool "SGI partition support"
 	default y if DEFAULT_SGI_PARTITION
 	help
 	  Say Y here if you would like to be able to read the hard disk
 	  partition table format used by SGI machines.
 
 config ULTRIX_PARTITION
-	bool "Ultrix partition table support" if PARTITION_ADVANCED
+	bool "Ultrix partition table support"
 	default y if MACH_DECSTATION
 	help
 	  Say Y here if you would like to be able to read the hard disk
@@ -212,7 +218,7 @@ config ULTRIX_PARTITION
 	  Otherwise, say N.
 
 config SUN_PARTITION
-	bool "Sun partition tables support" if PARTITION_ADVANCED
+	bool "Sun partition tables support"
 	default y if (SPARC || SUN3 || SUN3X)
 	---help---
 	  Like most systems, SunOS uses its own hard disk partition table
@@ -228,24 +234,28 @@ config SUN_PARTITION
 
 config KARMA_PARTITION
 	bool "Karma Partition support"
-	depends on PARTITION_ADVANCED
 	help
 	  Say Y here if you would like to mount the Rio Karma MP3 player, as it
 	  uses a proprietary partition table.
 
 config EFI_PARTITION
 	bool "EFI GUID Partition support"
-	depends on PARTITION_ADVANCED
 	select CRC32
 	help
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned using EFI GPT.
 
 config SYSV68_PARTITION
-	bool "SYSV68 partition table support" if PARTITION_ADVANCED
+	bool "SYSV68 partition table support"
 	default y if VME
 	help
 	  Say Y here if you would like to be able to read the hard disk
 	  partition table format used by Motorola Delta machines (using
 	  sysv68).
 	  Otherwise, say N.
+
+endif # PARTITION_ADVANCED
+
+endmenu
+
+endif # BLOCK
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists