| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <12173619152424@xenotime.net> Date: Tue, 29 Jul 2008 13:05:15 -0700 From: Randy Dunlap <rdunlap@...otime.net> To: linux-kernel@...r.kernel.org Cc: akpm@...ux-foundation.org, Sam Ravnborg <sam@...nborg.org> Subject: [PATCH 1/5] docsrc: build Documentation/ sources From: Randy Dunlap <randy.dunlap@...cle.com> Currently source files in the Documentation/ sub-dir can easily bit-rot since they are not generally buildable, either because they are hidden in text files or because there are no Makefile rules for them. This needs to be fixed so that the source files remain usable and good examples of code instead of bad examples. Add the ability to build source files that are in the Documentation/ dir. Add to Kconfig as "BUILD_DOCSRC" config symbol. Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the Documentation/ sources. Or enable BUILD_DOCSRC in the *config system. However, this symbol depends on HEADERS_CHECK since the header files need to be installed (for userspace builds). Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32, sparc64, powerpc, sh, m68k, & mips. Signed-off-by: Randy Dunlap <randy.dunlap@...cle.com> Reviewed-by: Sam Ravnborg <sam@...nborg.org> --- Documentation/DocBook/Makefile | 7 +++++++ Documentation/Makefile | 3 +++ Documentation/accounting/Makefile | 10 ++++++++++ Documentation/auxdisplay/Makefile | 10 ++++++++++ Documentation/connector/Makefile | 11 +++++++++++ Documentation/filesystems/configfs/Makefile | 3 +++ Documentation/ia64/Makefile | 8 ++++++++ Documentation/networking/Makefile | 8 ++++++++ Documentation/pcmcia/Makefile | 10 ++++++++++ Documentation/spi/Makefile | 11 +++++++++++ Documentation/video4linux/Makefile | 8 ++++++++ Documentation/vm/Makefile | 8 ++++++++ Documentation/watchdog/src/Makefile | 8 ++++++++ Makefile | 5 ++++- lib/Kconfig.debug | 9 +++++++++ 15 files changed, 118 insertions(+), 1 deletion(-) create mode 100644 Documentation/Makefile create mode 100644 Documentation/accounting/Makefile --- /dev/null +++ linux-next-20080729/Documentation/Makefile @@ -0,0 +1,3 @@ +obj-m := DocBook/ accounting/ auxdisplay/ connector/ \ + filesystems/configfs/ ia64/ networking/ \ + pcmcia/ spi/ video4linux/ vm/ watchdog/src/ --- /dev/null +++ linux-next-20080729/Documentation/accounting/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := getdelays + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include --- linux-next-20080729.orig/Makefile +++ linux-next-20080729/Makefile @@ -823,6 +823,9 @@ endif ifdef CONFIG_SAMPLES $(Q)$(MAKE) $(build)=samples endif +ifdef CONFIG_BUILD_DOCSRC + $(Q)$(MAKE) $(build)=Documentation +endif $(call vmlinux-modpost) $(call if_changed_rule,vmlinux__) $(Q)rm -f .old_version @@ -1167,7 +1170,7 @@ MRPROPER_FILES += .config .config.old in # clean: rm-dirs := $(CLEAN_DIRS) clean: rm-files := $(CLEAN_FILES) -clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs)) +clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation) PHONY += $(clean-dirs) clean archclean $(clean-dirs): --- linux-next-20080729.orig/Documentation/DocBook/Makefile +++ linux-next-20080729/Documentation/DocBook/Makefile @@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) $(obj)/procfs-guide.xml: $(C-procfs-example2) +# List of programs to build +##oops, this is a kernel module::hostprogs-y := procfs_example +obj-m += procfs_example.o + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \ exit 1 db2xtemplate = db2TYPE -o $(dir $@) $< --- /dev/null +++ linux-next-20080729/Documentation/auxdisplay/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := cfag12864b-example + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include --- /dev/null +++ linux-next-20080729/Documentation/connector/Makefile @@ -0,0 +1,11 @@ +ifneq ($(CONFIG_CONNECTOR),) +obj-m += cn_test.o +endif + +# List of programs to build +hostprogs-y := ucon + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include --- /dev/null +++ linux-next-20080729/Documentation/ia64/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := aliasing-test + +# Tell kbuild to always build the programs +always := $(hostprogs-y) --- /dev/null +++ linux-next-20080729/Documentation/networking/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := ifenslave + +# Tell kbuild to always build the programs +always := $(hostprogs-y) --- /dev/null +++ linux-next-20080729/Documentation/pcmcia/Makefile @@ -0,0 +1,10 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := crc32hash + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include --- /dev/null +++ linux-next-20080729/Documentation/spi/Makefile @@ -0,0 +1,11 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := spidev_test spidev_fdx + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include +HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include --- /dev/null +++ linux-next-20080729/Documentation/video4linux/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := v4lgrab + +# Tell kbuild to always build the programs +always := $(hostprogs-y) --- /dev/null +++ linux-next-20080729/Documentation/vm/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := slabinfo + +# Tell kbuild to always build the programs +always := $(hostprogs-y) --- /dev/null +++ linux-next-20080729/Documentation/watchdog/src/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := watchdog-simple watchdog-test + +# Tell kbuild to always build the programs +always := $(hostprogs-y) --- /dev/null +++ linux-next-20080729/Documentation/filesystems/configfs/Makefile @@ -0,0 +1,3 @@ +ifneq ($(CONFIG_CONFIGFS_FS),) +obj-m += configfs_example_explicit.o configfs_example_macros.o +endif --- linux-next-20080729.orig/lib/Kconfig.debug +++ linux-next-20080729/lib/Kconfig.debug @@ -644,6 +644,15 @@ config FIREWIRE_OHCI_REMOTE_DMA If unsure, say N. +menuconfig BUILD_DOCSRC + bool "Build targets in Documentation/ tree" + depends on HEADERS_CHECK + help + This option attempts to build objects from the source files in the + kernel Documentation/ tree. + + Say N if you are unsure. + source "samples/Kconfig" source "lib/Kconfig.kgdb" -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists