| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1217957207-23116-2-git-send-email-matthew@wil.cx>
Date: Tue, 5 Aug 2008 13:26:46 -0400
From: Matthew Wilcox <matthew@....cx>
To: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Cc: jgarzik@...ox.com, Matt_Domsch@...l.com,
Matthew Wilcox <willy@...ux.intel.com>
Subject: [PATCH] ata: Define new commands from ATA8
From: Matthew Wilcox <willy@...ux.intel.com>
Later patches require knowledge of some commands which aren't currently
defined. While I'm at it, add all the commands that are in ATA8 and
reorder the existing commands to be in the same order as ATA8.
Signed-off-by: Matthew Wilcox <willy@...ux.intel.com>
---
include/linux/ata.h | 97 ++++++++++++++++++++++++++++++++++----------------
1 files changed, 66 insertions(+), 31 deletions(-)
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 1c622e2..3815431 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -149,58 +149,93 @@ enum {
ATA_REG_IRQ = ATA_REG_NSECT,
/* ATA device commands */
- ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */
+ ATA_CMD_CFA_ERASE_SECTORS = 0xC0,
+ ATA_CMD_CFA_REQUEST_EXT_ERROR = 0x03,
+ ATA_CMD_CFA_TRANSLATE_SECTOR = 0x87,
+ ATA_CMD_CFA_WRITE_MULTI_WITHOUT_ERASE = 0xCD,
+ ATA_CMD_CFA_WRITE_SECTORS_WITHOUT_ERASE = 0x38,
+ ATA_CMD_CHK_MEDIA_CARD_TYPE = 0xD1,
ATA_CMD_CHK_POWER = 0xE5, /* check power mode */
- ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
- ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
+ ATA_CMD_CONFIG_STREAM = 0x51,
+ ATA_CMD_CONF_OVERLAY = 0xB1,
+ ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */
+ ATA_CMD_DLOAD_MCODE = 0x92,
ATA_CMD_EDD = 0x90, /* execute device diagnostic */
ATA_CMD_FLUSH = 0xE7,
ATA_CMD_FLUSH_EXT = 0xEA,
ATA_CMD_ID_ATA = 0xEC,
ATA_CMD_ID_ATAPI = 0xA1,
- ATA_CMD_READ = 0xC8,
- ATA_CMD_READ_EXT = 0x25,
- ATA_CMD_WRITE = 0xCA,
- ATA_CMD_WRITE_EXT = 0x35,
- ATA_CMD_WRITE_FUA_EXT = 0x3D,
+ ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
+ ATA_CMD_IDLEIMMEDIATE = 0xE1,
+ ATA_CMD_NVCACHE = 0xB6,
+ ATA_CMD_NOP = 0x00,
+ ATA_CMD_PACKET = 0xA0,
+ ATA_CMD_PMP_READ = 0xE4, /* aka READ BUFFER */
+ ATA_CMD_READ = 0xC8, /* aka READ DMA */
+ ATA_CMD_READ_EXT = 0x25, /* aka READ DMA EXT */
+ ATA_CMD_READ_QUEUED = 0xC7,
+ ATA_CMD_READ_QUEUED_EXT = 0x26,
ATA_CMD_FPDMA_READ = 0x60,
- ATA_CMD_FPDMA_WRITE = 0x61,
- ATA_CMD_PIO_READ = 0x20,
- ATA_CMD_PIO_READ_EXT = 0x24,
- ATA_CMD_PIO_WRITE = 0x30,
- ATA_CMD_PIO_WRITE_EXT = 0x34,
+ ATA_CMD_READ_LOG_EXT = 0x2F,
+ ATA_CMD_READ_LOG_DMA_EXT= 0x47,
ATA_CMD_READ_MULTI = 0xC4,
ATA_CMD_READ_MULTI_EXT = 0x29,
- ATA_CMD_WRITE_MULTI = 0xC5,
- ATA_CMD_WRITE_MULTI_EXT = 0x39,
- ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
- ATA_CMD_SET_FEATURES = 0xEF,
- ATA_CMD_SET_MULTI = 0xC6,
- ATA_CMD_PACKET = 0xA0,
- ATA_CMD_VERIFY = 0x40,
- ATA_CMD_VERIFY_EXT = 0x42,
- ATA_CMD_STANDBYNOW1 = 0xE0,
- ATA_CMD_IDLEIMMEDIATE = 0xE1,
- ATA_CMD_SLEEP = 0xE6,
- ATA_CMD_INIT_DEV_PARAMS = 0x91,
ATA_CMD_READ_NATIVE_MAX = 0xF8,
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
+ ATA_CMD_PIO_READ = 0x20, /* aka READ SECTOR(S) */
+ ATA_CMD_PIO_READ_EXT = 0x24, /* aka READ SECTOR(S) EXT */
+ ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
+ ATA_CMD_READ_STREAM_EXT = 0x2B,
+ ATA_CMD_VERIFY = 0x40, /* aka READ VERIFY SECTOR(S) */
+ ATA_CMD_VERIFY_EXT = 0x42, /* aka READ VERIFY SECTOR(S) EXT */
+ ATA_CMD_SEC_DISABLE_PASSWORD = 0xF6,
+ ATA_CMD_SEC_ERASE_PREPARE = 0xF3,
+ ATA_CMD_SEC_ERASE_UNIT = 0xF4,
+ ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+ ATA_CMD_SEC_SET_PASSWORD = 0xF1,
+ ATA_CMD_SEC_UNLOCK = 0xF2,
+ ATA_CMD_SERVICE = 0xA2,
+ ATA_CMD_SET_FEATURES = 0xEF,
ATA_CMD_SET_MAX = 0xF9,
ATA_CMD_SET_MAX_EXT = 0x37,
- ATA_CMD_READ_LOG_EXT = 0x2f,
- ATA_CMD_PMP_READ = 0xE4,
- ATA_CMD_PMP_WRITE = 0xE8,
- ATA_CMD_CONF_OVERLAY = 0xB1,
- ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+ ATA_CMD_SET_MULTI = 0xC6,
+ ATA_CMD_SLEEP = 0xE6,
+ ATA_CMD_SMART = 0xB0,
+ ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
+ ATA_CMD_STANDBYNOW1 = 0xE0,
+ ATA_CMD_TRUSTED_NON_DATA = 0x5B,
+ ATA_CMD_TRUSTED_RECEIVE = 0x5C,
+ ATA_CMD_TRUSTED_RECEIVE_DMA = 0x5D,
+ ATA_CMD_TRUSTED_SEND = 0x5E,
+ ATA_CMD_TRUSTED_SEND_DMA = 0x5F,
+ ATA_CMD_PMP_WRITE = 0xE8, /* aka WRITE BUFFER */
+ ATA_CMD_WRITE = 0xCA, /* aka WRITE DMA */
+ ATA_CMD_WRITE_EXT = 0x35, /* aka WRITE DMA EXT */
+ ATA_CMD_WRITE_FUA_EXT = 0x3D, /* aka WRITE DMA FUA EXT */
+ ATA_CMD_WRITE_DMA_QUEUED = 0xCC,
+ ATA_CMD_WRITE_DMA_QUEUED_EXT = 0x36,
+ ATA_CMD_WRITE_DMA_QUEUED_FUA_EXT = 0x3E,
+ ATA_CMD_FPDMA_WRITE = 0x61, /* aka WRITE FPDMA QUEUED */
+ ATA_CMD_WRITE_LOG_EXT = 0x3F,
+ ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
+ ATA_CMD_WRITE_MULTI = 0xC5,
+ ATA_CMD_WRITE_MULTI_EXT = 0x39,
+ ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
+ ATA_CMD_PIO_WRITE = 0x30, /* aka WRITE SECTOR(S) */
+ ATA_CMD_PIO_WRITE_EXT = 0x34, /* aka WRITE SECTOR(S) EXT */
+ ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
+ ATA_CMD_WRITE_STREAM_EXT = 0x3B,
+ ATA_CMD_WRITE_UNCORRECTABLE_EXT = 0x45,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
- /* READ/WRITE LONG (obsolete) */
+ /* Obsolete */
ATA_CMD_READ_LONG = 0x22,
ATA_CMD_READ_LONG_ONCE = 0x23,
ATA_CMD_WRITE_LONG = 0x32,
ATA_CMD_WRITE_LONG_ONCE = 0x33,
+ ATA_CMD_INIT_DEV_PARAMS = 0x91,
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists