| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080805182007.GA4631@Krystal>
Date: Tue, 5 Aug 2008 14:20:07 -0400
From: Mathieu Desnoyers <mathieu.desnoyers@...ymtl.ca>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>
Cc: James Bottomley <James.Bottomley@...senPartnership.com>,
akpm@...ux-foundation.org, Peter Zijlstra <peterz@...radead.org>,
Steven Rostedt <rostedt@...dmis.org>,
linux-kernel@...r.kernel.org, ltt-dev@...ts.casi.polymtl.ca
Subject: LTTng finds abnormally long APIC interrupt handler : 58.2 ms
Hi,
I would like to bring an interesting kernel latency issue I am
experiencing.
A trace taken with LTTng on a x86_64 dual quad-core, Linux kernel
2.6.26.1, shows that IRQ 239 handler (LOCAL_TIMER_VECTOR ->
smp_apic_timer_interrupt) runs for about 58.2 ms on 2 of the 8 cores,
and a bit later on the other 6. It can be repeated by taking a trace
shortly after boot : it happens at about 120 seconds after the cycle
counters has been reset.
The execution trace of one interrupt handler is (edited for clarity) :
Format :
event name: timestamp
pid, tgid, process name, execution mode
{ event data }
kernel_irq_entry: 121.733399510
0, 0, swapper, IRQ
{ irq_id = 239, kernel_mode = 1, ip = 0xFFFFFFFF80213936 }
kernel_softirq_raise: 121.733400143
0, 0, swapper, IRQ
{ softirq_id = 1 [run_timer_softirq+0x0/0x230] }
(takes a while : 58.2 ms)
kernel_sched_try_wakeup: 121.791694536
0, 0, swapper, IRQ
{ pid = 8, state = 1 }
kernel_softirq_raise: 121.791696762
0, 0, swapper, IRQ
{ softirq_id = 6 [run_rebalance_domains+0x0/0x6e0] }
kernel_irq_exit: 121.791697692
0, 0, swapper, SYSCALL
{ handled = 1 }
Where pid = 8 is kernel thread watchdog/1
The same trace happens on the other CPUs which also have a long
interrupt handler. The surroundings of the problem points out to
run_local_timers(), which is the function responsible for raising the
TIMER_SOFTIRQ. (which is the last event that occurs on the system for a
while). It could also be the caller : update_process_times(), any
function called from update_process_times() after the run_local_timers()
call or actually any function executing between the "raise" and the "try
wakeup" events.
The kernel config is attached below, so is the dmesg.
Any idea regarding what is happening here ?
Mathieu
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26.1
# Tue Aug 5 13:59:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-trace"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_MARKERS_USERSPACE=y
CONFIG_HAVE_MARKERS_ABI=y
CONFIG_TRACEPROBES=y
#
# Linux Trace Toolkit
#
CONFIG_LTT_TIMESTAMP=y
CONFIG_HAVE_LTT_UNSTABLE_TSC=y
CONFIG_HAVE_LTT_CLOCK=y
# CONFIG_HAVE_LTT_SYNTHETIC_TSC is not set
CONFIG_HAVE_LTT_DUMP_TABLES=y
CONFIG_LTT=y
CONFIG_LTT_RELAY=y
CONFIG_LTT_SERIALIZE=y
CONFIG_LTT_MARKER_CONTROL=y
CONFIG_LTT_TRACER=y
CONFIG_LTT_ALIGNMENT=y
CONFIG_LTT_VMCORE=y
# CONFIG_LTT_HEARTBEAT is not set
CONFIG_LTT_NETLINK_CONTROL=m
CONFIG_LTT_STATEDUMP=m
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_IMMEDIATE=y
CONFIG_IMMEDIATE=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_CLASSIC_RCU is not set
#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_CLOCK is not set
CONFIG_MEMTEST_BOOTPARAM=y
CONFIG_MEMTEST_BOOTPARAM_VALUE=0
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_TRACE=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_X86_PAT is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
# CONFIG_ACPI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
#
# PCILynx controller requires I2C
#
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I5000=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
CONFIG_SAMPLE_TRACEPOINTS=m
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
CONFIG_KVM_TRACE=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[ 0.000000] Linux version 2.6.26.1-trace (compudj@ok) (gcc version 4.3.1 (Debian 4.3.1-2) ) #1062 SMP PREEMPT Tue Aug 5 12:21:42 EDT 2008
[ 0.000000] Command line: root=/dev/md1 ro console=tty0 console=ttyS0,38400n8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff60000 (usable)
[ 0.000000] BIOS-e820: 00000000bff60000 - 00000000bff69000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff69000 - 00000000bff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 786272) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 4456448) 2 entries of 256 used
[ 0.000000] max_pfn_mapped = 4456448
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 786272) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 4456448) 2 entries of 256 used
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-cedea7] TEXT DATA BSS
[ 0.000000] early res: 3 [9d000-fffff] BIOS reserved
[ 0.000000] early res: 4 [8000-19fff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200197fffff] PMD -> [ffff81000c200000-ffff8100259fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 4456448
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 786272
[ 0.000000] 0: 1048576 -> 4456448
[ 0.000000] On node 0 totalpages: 4194045
[ 0.000000] DMA zone: 96 pages used for memmap
[ 0.000000] DMA zone: 2919 pages reserved
[ 0.000000] DMA zone: 982 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 24480 pages used for memmap
[ 0.000000] DMA32 zone: 757696 pages, LIFO batch:31
[ 0.000000] Normal zone: 79872 pages used for memmap
[ 0.000000] Normal zone: 3328000 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: INTEL Product ID: Bridge CRB <6>MPTABLE: Product ID: Bridge CRB <6>MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #4
[ 0.000000] Processor #1
[ 0.000000] Processor #5
[ 0.000000] Processor #2
[ 0.000000] Processor #6
[ 0.000000] Processor #3
[ 0.000000] Processor #7
[ 0.000000] I/O APIC #8 Version 32 at 0xFEC00000.
[ 0.000000] I/O APIC #9 Version 32 at 0xFEC81000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 8
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 428100 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4086678
[ 0.000000] Kernel command line: root=/dev/md1 ro console=tty0 console=ttyS0,38400n8
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PIT
[ 0.000000] time.c: Detected 2000.121 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004000] ... MAX_LOCK_DEPTH: 48
[ 0.004000] ... MAX_LOCKDEP_KEYS: 2048
[ 0.004000] ... CLASSHASH_SIZE: 1024
[ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.004000] ... CHAINHASH_SIZE: 8192
[ 0.004000] memory used by lock dependency info: 1712 kB
[ 0.004000] per task-struct memory footprint: 3456 bytes
[ 0.004000] ------------------------
[ 0.004000] | Locking API testsuite:
[ 0.004000] ----------------------------------------------------------------------------
[ 0.004000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.004000] --------------------------------------------------------------------------
[ 0.004000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.004000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.004000] --------------------------------------------------------------------------
[ 0.004000] recursive read-lock: | ok | | ok |
[ 0.004000] recursive read-lock #2: | ok | | ok |
[ 0.004000] mixed read-write-lock: | ok | | ok |
[ 0.004000] mixed write-read-lock: | ok | | ok |
[ 0.004000] --------------------------------------------------------------------------
[ 0.004000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.004000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.004000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.004000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.004000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.004000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.004000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.004000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.004000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.004000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.004000] hard-irq read-recursion/123: ok |
[ 0.004000] soft-irq read-recursion/123: ok |
[ 0.004000] hard-irq read-recursion/132: ok |
[ 0.004000] soft-irq read-recursion/132: ok |
[ 0.004000] hard-irq read-recursion/213: ok |
[ 0.004000] soft-irq read-recursion/213: ok |
[ 0.004000] hard-irq read-recursion/231: ok |
[ 0.004000] soft-irq read-recursion/231: ok |
[ 0.004000] hard-irq read-recursion/312: ok |
[ 0.004000] soft-irq read-recursion/312: ok |
[ 0.004000] hard-irq read-recursion/321: ok |
[ 0.004000] soft-irq read-recursion/321: ok |
[ 0.004000] -------------------------------------------------------
[ 0.004000] Good, all 218 testcases passed! |
[ 0.004000] ---------------------------------
[ 0.004000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004000] Checking aperture...
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x2b53000 - 0x6b53000
[ 0.004000] Memory: 16251968k/17825792k available (4174k kernel code, 523620k reserved, 1935k data, 640k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.087824] Calibrating delay using timer specific routine.. 4006.56 BogoMIPS (lpj=8013129)
[ 0.096000] Security Framework initialized
[ 0.100000] Capability LSM initialized
[ 0.104000] Mount-cache hash table entries: 256
[ 0.108000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.116000] CPU: L2 cache: 6144K
[ 0.120000] CPU: Physical Processor ID: 0
[ 0.124000] CPU: Processor Core ID: 0
[ 0.128000] CPU0: Thermal monitoring handled by SMI
[ 0.128000] using mwait in idle threads.
[ 0.132000] ExtINT not setup in hardware but reported by MP table
[ 0.176000] CPU0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.187716] Using local APIC timer interrupts.
[ 0.196000] APIC timer calibration result 20834587
[ 0.196000] Detected 20.834 MHz APIC timer.
[ 0.200000] lockdep: fixing up alternatives.
[ 0.204000] Booting processor 1/4 ip 6000
[ 0.220013] Initializing CPU#1
[ 0.220013] Calibrating delay using timer specific routine.. 4000.33 BogoMIPS (lpj=8000667)
[ 0.220013] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.220013] CPU: L2 cache: 6144K
[ 0.220013] CPU: Physical Processor ID: 1
[ 0.220013] CPU: Processor Core ID: 0
[ 0.220013] CPU1: Thermal monitoring enabled (TM1)
[ 0.299458] CPU1: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.311734] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.316000] lockdep: fixing up alternatives.
[ 0.320000] Booting processor 2/1 ip 6000
[ 0.336021] Initializing CPU#2
[ 0.336021] Calibrating delay using timer specific routine.. 4000.31 BogoMIPS (lpj=8000630)
[ 0.336021] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.336021] CPU: L2 cache: 6144K
[ 0.336021] CPU: Physical Processor ID: 0
[ 0.336021] CPU: Processor Core ID: 1
[ 0.336021] CPU2: Thermal monitoring enabled (TM1)
[ 0.416021] CPU2: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.428701] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.432966] lockdep: fixing up alternatives.
[ 0.436966] Booting processor 3/5 ip 6000
[ 0.452028] Initializing CPU#3
[ 0.452028] Calibrating delay using timer specific routine.. 4000.32 BogoMIPS (lpj=8000645)
[ 0.452028] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.452028] CPU: L2 cache: 6144K
[ 0.452028] CPU: Physical Processor ID: 1
[ 0.452028] CPU: Processor Core ID: 1
[ 0.452028] CPU3: Thermal monitoring enabled (TM1)
[ 0.532024] CPU3: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.544902] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.549168] lockdep: fixing up alternatives.
[ 0.553168] Booting processor 4/2 ip 6000
[ 0.568035] Initializing CPU#4
[ 0.568035] Calibrating delay using timer specific routine.. 4000.31 BogoMIPS (lpj=8000623)
[ 0.568035] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.568035] CPU: L2 cache: 6144K
[ 0.568035] CPU: Physical Processor ID: 0
[ 0.568035] CPU: Processor Core ID: 2
[ 0.568035] CPU4: Thermal monitoring enabled (TM1)
[ 0.648219] CPU4: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.660903] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.665168] lockdep: fixing up alternatives.
[ 0.669168] Booting processor 5/6 ip 6000
[ 0.684042] Initializing CPU#5
[ 0.684042] Calibrating delay using timer specific routine.. 4000.32 BogoMIPS (lpj=8000643)
[ 0.684042] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.684042] CPU: L2 cache: 6144K
[ 0.684042] CPU: Physical Processor ID: 1
[ 0.684042] CPU: Processor Core ID: 2
[ 0.684042] CPU5: Thermal monitoring enabled (TM1)
[ 0.764220] CPU5: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.777033] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.781168] lockdep: fixing up alternatives.
[ 0.785168] Booting processor 6/3 ip 6000
[ 0.800050] Initializing CPU#6
[ 0.800050] Calibrating delay using timer specific routine.. 4000.30 BogoMIPS (lpj=8000614)
[ 0.800050] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.800050] CPU: L2 cache: 6144K
[ 0.800050] CPU: Physical Processor ID: 0
[ 0.800050] CPU: Processor Core ID: 3
[ 0.800050] CPU6: Thermal monitoring enabled (TM1)
[ 0.880114] CPU6: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.892902] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.897168] lockdep: fixing up alternatives.
[ 0.901168] Booting processor 7/7 ip 6000
[ 0.916057] Initializing CPU#7
[ 0.916057] Calibrating delay using timer specific routine.. 4000.31 BogoMIPS (lpj=8000622)
[ 0.916057] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.916057] CPU: L2 cache: 6144K
[ 0.916057] CPU: Physical Processor ID: 1
[ 0.916057] CPU: Processor Core ID: 3
[ 0.916057] CPU7: Thermal monitoring enabled (TM1)
[ 0.996050] CPU7: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 1.009044] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 1.013299] Brought up 8 CPUs
[ 1.017299] Total of 8 processors activated (32008.78 BogoMIPS).
[ 1.021299] CPU0 attaching sched-domain:
[ 1.021299] domain 0: span 0,2
[ 1.021299] groups: 0 2
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 0,2 1,3 4,6 5,7
[ 1.021299] CPU1 attaching sched-domain:
[ 1.021299] domain 0: span 1,3
[ 1.021299] groups: 1 3
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 1,3 4,6 5,7 0,2
[ 1.021299] CPU2 attaching sched-domain:
[ 1.021299] domain 0: span 0,2
[ 1.021299] groups: 2 0
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 0,2 1,3 4,6 5,7
[ 1.021299] CPU3 attaching sched-domain:
[ 1.021299] domain 0: span 1,3
[ 1.021299] groups: 3 1
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 1,3 4,6 5,7 0,2
[ 1.021299] CPU4 attaching sched-domain:
[ 1.021299] domain 0: span 4,6
[ 1.021299] groups: 4 6
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 4,6 5,7 0,2 1,3
[ 1.021299] CPU5 attaching sched-domain:
[ 1.021299] domain 0: span 5,7
[ 1.021299] groups: 5 7
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 5,7 0,2 1,3 4,6
[ 1.021299] CPU6 attaching sched-domain:
[ 1.021299] domain 0: span 4,6
[ 1.021299] groups: 6 4
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 4,6 5,7 0,2 1,3
[ 1.021299] CPU7 attaching sched-domain:
[ 1.021299] domain 0: span 5,7
[ 1.021299] groups: 7 5
[ 1.021299] domain 1: span 0-7
[ 1.021299] groups: 5,7 0,2 1,3 4,6
[ 1.025299] net_namespace: 1296 bytes
[ 1.029299] xor: automatically using best checksumming function: generic_sse
[ 1.051269] generic_sse: 7118.000 MB/sec
[ 1.057299] xor: using function: generic_sse (7118.000 MB/sec)
[ 1.061299] NET: Registered protocol family 16
[ 1.069299] PCI: Using configuration type 1 for base access
[ 1.081998] SCSI subsystem initialized
[ 1.086742] libata version 3.00 loaded.
[ 1.090742] usbcore: registered new interface driver usbfs
[ 1.098206] usbcore: registered new interface driver hub
[ 1.105759] usbcore: registered new device driver usb
[ 1.109759] PCI: Probing PCI hardware
[ 1.113961] PCI: Probing PCI hardware (bus 00)
[ 1.113961] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.113961] PCI: Transparent bridge - 0000:00:1e.0
[ 1.122120] PCI: Using IRQ router PIIX/ICH [8086/2670] at 0000:00:1f.0
[ 1.127856] PCI->APIC IRQ transform: 0000:00:00.0[A] -> IRQ 16
[ 1.131856] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
[ 1.135856] PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 16
[ 1.139856] PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 16
[ 1.143856] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 16
[ 1.147856] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 17
[ 1.151856] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
[ 1.155856] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
[ 1.159856] PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16
[ 1.163856] PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 17
[ 1.167856] PCI->APIC IRQ transform: 0000:00:1e.2[A] -> IRQ 17
[ 1.171856] PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 19
[ 1.175856] PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
[ 1.179856] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
[ 1.183856] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 1.187856] PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16
[ 1.191856] PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 16
[ 1.195856] PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 18
[ 1.199856] PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 18
[ 1.203856] PCI->APIC IRQ transform: 0000:05:00.1[B] -> IRQ 19
[ 1.241786] PCI-GART: No AMD northbridge found.
[ 1.249681] hpet clockevent registered
[ 1.249681] PCI: Failed to allocate mem resource #6:20000@...00000 for 0000:01:00.0
[ 1.256383] PCI: Bridge: 0000:00:02.0
[ 1.270033] IO window: 3000-3fff
[ 1.280308] MEM window: 0xd0000000-0xd2ffffff
[ 1.297930] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[ 1.321019] PCI: Bridge: 0000:03:00.0
[ 1.332031] IO window: disabled.
[ 1.343261] MEM window: disabled.
[ 1.353763] PREFETCH window: disabled.
[ 1.365572] PCI: Bridge: 0000:03:02.0
[ 1.376782] IO window: 4000-4fff
[ 1.388008] MEM window: 0xd3000000-0xd30fffff
[ 1.403387] PREFETCH window: 0x00000000d3200000-0x00000000d32fffff
[ 1.430472] PCI: Bridge: 0000:02:00.0
[ 1.441488] IO window: 4000-4fff
[ 1.451734] MEM window: 0xd3000000-0xd30fffff
[ 1.469357] PREFETCH window: 0x00000000d3200000-0x00000000d32fffff
[ 1.496443] PCI: Bridge: 0000:02:00.3
[ 1.507457] IO window: disabled.
[ 1.518686] MEM window: disabled.
[ 1.529187] PREFETCH window: disabled.
[ 1.540994] PCI: Bridge: 0000:00:03.0
[ 1.552206] IO window: 4000-4fff
[ 1.563438] MEM window: 0xd3000000-0xd31fffff
[ 1.581060] PREFETCH window: 0x00000000d3200000-0x00000000d32fffff
[ 1.608147] PCI: Bridge: 0000:00:04.0
[ 1.619160] IO window: disabled.
[ 1.629409] MEM window: disabled.
[ 1.641661] PREFETCH window: disabled.
[ 1.654965] PCI: Bridge: 0000:00:1e.0
[ 1.665981] IO window: disabled.
[ 1.677205] MEM window: disabled.
[ 1.688483] PREFETCH window: disabled.
[ 1.700311] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.700332] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.700359] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.700393] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 1.700426] PCI: Setting latency timer of device 0000:03:02.0 to 64
[ 1.700452] PCI: Setting latency timer of device 0000:02:00.3 to 64
[ 1.700472] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.700490] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1.700513] NET: Registered protocol family 2
[ 1.861618] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.893596] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.933390] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 1.965323] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.997382] TCP reno registered
[ 2.054974] NET: Registered protocol family 1
[ 2.082880] Initializing RT-Tester: OK
[ 2.094182] audit: initializing netlink socket (disabled)
[ 2.111571] type=2000 audit(1217956139.981:1): initialized
[ 2.612369] Total HugeTLB memory allocated, 0
[ 2.895157] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
[ 2.914010] fuse init (API version 7.9)
[ 2.937859] msgmni has been set to 31743
[ 2.951926] async_tx: api initialized (sync-only)
[ 2.963961] io scheduler noop registered
[ 2.979762] io scheduler anticipatory registered (default)
[ 3.000450] io scheduler deadline registered
[ 3.013304] io scheduler cfq registered
[ 3.025291] LTT : ltt-relay init
[ 11.316468] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 11.338853] pci 0000:01:00.0: Boot video device
[ 11.401651] lp: driver loaded but no devices found
[ 11.417850] Linux agpgart interface v0.103
[ 11.434166] [drm] Initialized drm 1.1.0 20060810
[ 11.448016] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.727918] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.004370] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 12.024214] parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
[ 12.043924] parport0: irq 7 detected
[ 12.056696] lp0: using parport0 (polling).
[ 12.085326] FDC 0 is a post-1991 82077
[ 12.107036] brd: module loaded
[ 12.120040] Uniform Multi-Platform E-IDE driver
[ 12.133630] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 12.158121] ESB2: IDE controller (0x8086:0x269e rev 0x09) at PCI slot 0000:00:1f.1
[ 12.178145] ESB2: not 100% native mode: will probe irqs later
[ 12.198135] ESB2: IDE port disabled
[ 12.207409] ide0: BM-DMA at 0x18c0-0x18c7
[ 12.221914] Probing IDE interface ide0...
[ 12.790355] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 12.808264] Driver 'sd' needs updating - please use bus_type methods
[ 12.828972] ahci 0000:00:1f.2: version 3.0
[ 13.829005] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 13.854888] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
[ 13.874184] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 13.875944] scsi0 : ahci
[ 13.884972] scsi1 : ahci
[ 13.893886] scsi2 : ahci
[ 13.901618] scsi3 : ahci
[ 13.909470] scsi4 : ahci
[ 13.917321] scsi5 : ahci
[ 13.925225] ata1: SATA max UDMA/133 abar m1024@...3400c00 port 0xd3400d00 irq 19
[ 13.948519] ata2: SATA max UDMA/133 abar m1024@...3400c00 port 0xd3400d80 irq 19
[ 13.970893] ata3: SATA max UDMA/133 abar m1024@...3400c00 port 0xd3400e00 irq 19
[ 13.993049] ata4: SATA max UDMA/133 abar m1024@...3400c00 port 0xd3400e80 irq 19
[ 14.016517] ata5: SATA max UDMA/133 abar m1024@...3400c00 port 0xd3400f00 irq 19
[ 14.038676] ata6: SATA max UDMA/133 abar m1024@...3400c00 port 0xd3400f80 irq 19
[ 14.378909] ata1: SATA link down (SStatus 0 SControl 300)
[ 14.716305] ata2: SATA link down (SStatus 0 SControl 300)
[ 15.384770] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 15.407344] ata3.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL01, max UDMA/100
[ 15.433440] ata3.00: configured for UDMA/100
[ 15.762601] ata4: SATA link down (SStatus 0 SControl 300)
[ 16.265467] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 16.287496] ata5.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 16.303502] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 16.325715] ata5.00: configured for UDMA/133
[ 16.823507] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 16.846941] ata6.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 16.862946] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 16.885133] ata6.00: configured for UDMA/133
[ 16.901689] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL01 PQ: 0 ANSI: 5
[ 16.930144] scsi 2:0:0:0: Attached scsi generic sg0 type 5
[ 16.946152] scsi 4:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 16.971729] sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 16.991768] sd 4:0:0:0: [sda] Write Protect is off
[ 17.007170] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.007232] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.035165] sd 4:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 17.056582] sd 4:0:0:0: [sda] Write Protect is off
[ 17.071170] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.071233] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.098340] sda: sda1 sda2 sda3
[ 17.131117] sd 4:0:0:0: [sda] Attached SCSI disk
[ 17.146232] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 17.162503] scsi 5:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 17.187161] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 17.210966] sd 5:0:0:0: [sdb] Write Protect is off
[ 17.225330] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.226931] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.255671] sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 17.275708] sd 5:0:0:0: [sdb] Write Protect is off
[ 17.289272] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.291690] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.315698] sdb: sdb1 sdb2 sdb3
[ 17.352118] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 17.367295] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 17.386216] ieee1394: raw1394: /dev/raw1394 device initialized
[ 17.405365] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 17.405365] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 17.423821] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 17.448920] ehci_hcd 0000:00:1d.7: debug port 1
[ 17.462523] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 17.462535] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd3400000
[ 17.494956] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 17.519577] usb usb1: configuration #1 chosen from 1 choice
[ 17.536622] hub 1-0:1.0: USB hub found
[ 17.544660] hub 1-0:1.0: 8 ports detected
[ 17.665765] USB Universal Host Controller Interface driver v3.0
[ 17.683764] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 17.683768] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.702266] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 17.724459] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
[ 17.752980] usb usb2: configuration #1 chosen from 1 choice
[ 17.769985] hub 2-0:1.0: USB hub found
[ 17.778027] hub 2-0:1.0: 2 ports detected
[ 17.895015] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 17.895020] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.914436] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 17.921493] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 17.958246] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 17.975873] usb usb3: configuration #1 chosen from 1 choice
[ 17.992876] hub 3-0:1.0: USB hub found
[ 18.004134] hub 3-0:1.0: 2 ports detected
[ 18.055779] usb 1-7: configuration #1 chosen from 1 choice
[ 18.121254] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 18.121254] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 18.137355] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 18.158232] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 18.177311] usb usb4: configuration #1 chosen from 1 choice
[ 18.194979] hub 4-0:1.0: USB hub found
[ 18.206235] hub 4-0:1.0: 2 ports detected
[ 18.322097] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 18.322097] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 18.338160] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 18.358215] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 18.377284] usb usb5: configuration #1 chosen from 1 choice
[ 18.394993] hub 5-0:1.0: USB hub found
[ 18.406401] hub 5-0:1.0: 2 ports detected
[ 18.648964] usbcore: registered new interface driver usblp
[ 18.665828] Initializing USB Mass Storage driver...
[ 18.681756] scsi6 : SCSI emulation for USB Mass Storage devices
[ 18.702787] usb-storage: device found at 2
[ 18.702787] usb-storage: waiting for device to settle before scanning
[ 18.702787] usbcore: registered new interface driver usb-storage
[ 18.720788] USB Mass Storage support registered.
[ 18.985893] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.002730] mice: PS/2 mouse device common for all mice
[ 19.186244] md: linear personality registered for level -1
[ 19.202684] md: raid0 personality registered for level 0
[ 19.218612] md: raid1 personality registered for level 1
[ 19.234545] md: raid10 personality registered for level 10
[ 19.316190] raid6: int64x1 1865 MB/s
[ 19.394449] raid6: int64x2 2452 MB/s
[ 19.472697] raid6: int64x4 2347 MB/s
[ 19.550955] raid6: int64x8 1747 MB/s
[ 19.629222] raid6: sse2x1 3147 MB/s
[ 19.707483] raid6: sse2x2 5741 MB/s
[ 19.785735] raid6: sse2x4 5920 MB/s
[ 19.801002] raid6: using algorithm sse2x4 (5920 MB/s)
[ 19.820197] md: raid6 personality registered for level 6
[ 19.836164] md: raid5 personality registered for level 5
[ 19.852165] md: raid4 personality registered for level 4
[ 19.868163] md: multipath personality registered for level -4
[ 19.889466] md: faulty personality registered for level -5
[ 19.913914] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@...hat.com
[ 19.937921] EDAC MC: Ver: 2.1.0 Aug 5 2008
[ 19.952211] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
[ 19.976276] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 20.012335] usbcore: registered new interface driver usbhid
[ 20.029498] usbhid: v2.6:USB HID core driver
[ 20.043330] Advanced Linux Sound Architecture Driver Version 1.0.16.
[ 20.062551] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 20.381501] intel8x0_measure_ac97_clock: measured 56632 usecs
[ 20.398716] intel8x0: clocking to 48000
[ 20.414165] ALSA device list:
[ 20.422413] #0: Intel ESB2 with ALC650F at irq 17
[ 20.626882] TCP cubic registered
[ 20.639674] NET: Registered protocol family 10
[ 20.653277] IPv6 over IPv4 tunneling driver
[ 20.668623] NET: Registered protocol family 17
[ 20.683479] RPC: Registered udp transport module.
[ 20.697053] RPC: Registered tcp transport module.
[ 20.716359] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 20.737138] md: Autodetecting RAID arrays.
[ 20.809753] md: Scanned 4 and added 4 devices.
[ 20.823080] md: autorun ...
[ 20.831480] md: considering sdb3 ...
[ 20.842943] md: adding sdb3 ...
[ 20.853706] md: sdb1 has different UUID to sdb3
[ 20.867306] md: adding sda3 ...
[ 20.877007] md: sda1 has different UUID to sdb3
[ 20.892346] md: created md1
[ 20.900405] md: bind<sda3>
[ 20.908732] md: bind<sdb3>
[ 20.916906] md: running: <sdb3><sda3>
[ 20.928442] raid1: raid set md1 active with 2 out of 2 mirrors
[ 20.947817] md: considering sdb1 ...
[ 20.958564] md: adding sdb1 ...
[ 20.968266] md: adding sda1 ...
[ 20.976568] md: created md0
[ 20.984969] md: bind<sda1>
[ 20.993149] md: bind<sdb1>
[ 21.001314] md: running: <sdb1><sda1>
[ 21.014055] raid1: raid set md0 active with 2 out of 2 mirrors
[ 21.036432] md: ... autorun DONE.
[ 21.092432] kjournald starting. Commit interval 5 seconds
[ 21.094602] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.094602] VFS: Mounted root (ext3 filesystem) readonly.
[ 21.094602] Freeing unused kernel memory: 640k freed
[ 21.094602] Write protecting the kernel read-only data: 5728k
[ 23.737886] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 23.756548] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 23.777017] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 23.798426] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 23.823922] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 23.841018] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 23.868563] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 23.898329] eth0: (PCI Express:2.5GB/s:Width x4) 00:30:48:c0:7c:bc
[ 23.900883] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 23.901005] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 23.951110] eth0: Intel(R) PRO/1000 Network Connection
[ 23.967138] eth0: MAC: 3, PHY: 5, PBA No: 2050ff-0ff
[ 23.967138] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 24.007038] PCI: Setting latency timer of device 0000:05:00.1 to 64
[ 24.008599] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 24.036214] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 24.055494] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 24.087104] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 24.114518] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 24.120059] eth1: (PCI Express:2.5GB/s:Width x4) 00:30:48:c0:7c:bd
[ 24.120062] eth1: Intel(R) PRO/1000 Network Connection
[ 24.120140] eth1: MAC: 3, PHY: 5, PBA No: 2050ff-0ff
[ 24.201331] usb-storage: device scan complete
[ 24.921496] Adding 9767512k swap on /dev/sda2. Priority:-1 extents:1 across:9767512k
[ 24.969007] Adding 9767512k swap on /dev/sdb2. Priority:-2 extents:1 across:9767512k
[ 25.470385] EXT3 FS on md1, internal journal
[ 25.831023] loop: module loaded
[ 25.879961] ltt-control init
[ 25.908137] LTT : State dump init
[ 26.540346] kjournald starting. Commit interval 5 seconds
[ 26.557742] EXT3 FS on md0, internal journal
[ 26.571915] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.258990] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.988195] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 30.007806] eth0: 10/100 speed: disabling TSO
[ 30.023831] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.280283] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 33.782303] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 47.556787] ltt-control ltt_control_input
[ 47.556795] ltt_control : trace test
[ 47.567510] Creating trace test
[ 47.615989] ltt-control ltt_control_input
[ 47.615998] ltt_control : trace test
[ 47.629696] Start tracing test
[ 47.630221] LTT state dump begin
[ 47.630226] LTT state dump thread start
[ 47.642728] LTT state dump end
[ 50.099028] eth0: no IPv6 routers present
[ 456.026353] ltt-control ltt_control_input
[ 456.026363] ltt_control : trace test
[ 456.037638] Stop tracing test
[ 456.041891] ltt-control ltt_control_input
[ 456.041901] ltt_control : trace test
[ 456.052507] Destroying trace test
--
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists