| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Aug 2008 19:14:06 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Borislav Petkov <petkovbb@...il.com>
Subject: [PATCH 4/2] ide-{floppy,tape}: remove request stack
* Add 'struct request request_sense_rq' to struct ide_{floppy,tape}_obj
and switch ide*_retry_pc() to use it (there can be only one REQUEST SENSE
request active for a given device).
* Remove no longer needed ide*_next_rq_storage(), rq_stack[]
and rq_stack_index.
* DBG_PCRQ_STACK -> DBG_PC_STACK
* Update comments for IDE*_PC_STACK and idetape_queue_pc_{head,tail}().
There should be no functional changes caused by this patch.
Cc: Borislav Petkov <petkovbb@...il.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
pc stack can also be removed with a bit of care, we just need sth like:
- add request_sense_pc (request_sense_rq alike)
- dynamically allocate pc-s for blk_{fs,pc}_request() in ide-floppy.c
and for REQ_IDETAPE_{READ,WRITE} in ide-tape.c
- add PC_FLAG_DYN for dynamically allocated pc-s
- (the difficult part) figure out where to put freeing of dynamic pc-s
Borislav, AFAIR you had some patches doing dynamic pc/rq-s?
Maybe it would be possible to dust off just their rq-parts?
drivers/ide/ide-floppy.c | 22 ++++-----------
drivers/ide/ide-tape.c | 68 ++++++++---------------------------------------
2 files changed, 18 insertions(+), 72 deletions(-)
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -76,8 +76,8 @@
/*
* In various places in the driver, we need to allocate storage for packet
- * commands and requests, which will remain valid while we leave the driver to
- * wait for an interrupt or a timeout event.
+ * commands, which will remain valid while we leave the driver to wait for
+ * an interrupt or a timeout event.
*/
#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
@@ -107,9 +107,8 @@ typedef struct ide_floppy_obj {
struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
/* Next free packet command storage space */
int pc_stack_index;
- struct request rq_stack[IDEFLOPPY_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
+
+ struct request request_sense_rq;
/* Last error information */
u8 sense_key, asc, ascq;
@@ -298,15 +297,6 @@ static struct ide_atapi_pc *idefloppy_ne
return (&floppy->pc_stack[floppy->pc_stack_index++]);
}
-static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
- floppy->rq_stack_index = 0;
- return (&floppy->rq_stack[floppy->rq_stack_index++]);
-}
-
static void ide_floppy_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -365,12 +355,12 @@ static void idefloppy_create_request_sen
*/
static void idefloppy_retry_pc(ide_drive_t *drive)
{
+ struct ide_floppy_obj *floppy = drive->driver_data;
+ struct request *rq = &floppy->request_sense_rq;
struct ide_atapi_pc *pc;
- struct request *rq;
(void)ide_read_error(drive);
pc = idefloppy_next_pc_storage(drive);
- rq = idefloppy_next_rq_storage(drive);
idefloppy_create_request_sense_cmd(pc);
idefloppy_queue_pc_head(drive, pc, rq);
}
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -56,8 +56,8 @@ enum {
DBG_CHRDEV = (1 << 2),
/* all remaining procedures */
DBG_PROCS = (1 << 3),
- /* buffer alloc info (pc_stack & rq_stack) */
- DBG_PCRQ_STACK = (1 << 4),
+ /* buffer alloc info (pc_stack) */
+ DBG_PC_STACK = (1 << 4),
};
/* define to see debug info */
@@ -89,9 +89,9 @@ enum {
#define IDETAPE_PC_BUFFER_SIZE 256
/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
+ * In various places in the driver, we need to allocate storage for packet
+ * commands, which will remain valid while we leave the driver to wait for
+ * an interrupt or a timeout event.
*/
#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
@@ -230,9 +230,8 @@ typedef struct ide_tape_obj {
struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
/* Next free packet command storage space */
int pc_stack_index;
- struct request rq_stack[IDETAPE_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
+
+ struct request request_sense_rq;
/*
* DSC polling variables.
@@ -462,7 +461,7 @@ static struct ide_atapi_pc *idetape_next
{
idetape_tape_t *tape = drive->driver_data;
- debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
+ debug_log(DBG_PC_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
if (tape->pc_stack_index == IDETAPE_PC_STACK)
tape->pc_stack_index = 0;
@@ -470,30 +469,6 @@ static struct ide_atapi_pc *idetape_next
}
/*
- * idetape_next_rq_storage is used along with idetape_next_pc_storage.
- * Since we queue packet commands in the request queue, we need to
- * allocate a request, along with the allocation of a packet command.
- */
-
-/**************************************************************
- * *
- * This should get fixed to use kmalloc(.., GFP_ATOMIC) *
- * followed later on by kfree(). -ml *
- * *
- **************************************************************/
-
-static struct request *idetape_next_rq_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
-
- if (tape->rq_stack_index == IDETAPE_PC_STACK)
- tape->rq_stack_index = 0;
- return (&tape->rq_stack[tape->rq_stack_index++]);
-}
-
-/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
*/
@@ -692,17 +667,7 @@ static void idetape_create_request_sense
/*
* Generate a new packet command request in front of the request queue, before
* the current request, so that it will be processed immediately, on the next
- * pass through the driver. The function below is called from the request
- * handling part of the driver (the "bottom" part). Safe storage for the request
- * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
- *
- * Memory for those requests is pre-allocated at initialization time, and is
- * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
- * the maximum possible number of inter-dependent packet commands.
- *
- * The higher level of the driver - The ioctl handler and the character device
- * handling functions should queue request to the lower level part and wait for
- * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
+ * pass through the driver.
*/
static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
struct request *rq)
@@ -726,12 +691,12 @@ static void idetape_queue_pc_head(ide_dr
*/
static void idetape_retry_pc(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct request *rq = &tape->request_sense_rq;
struct ide_atapi_pc *pc;
- struct request *rq;
(void)ide_read_error(drive);
pc = idetape_next_pc_storage(drive);
- rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
idetape_queue_pc_head(drive, pc, rq);
@@ -1246,16 +1211,7 @@ static void idetape_create_test_unit_rea
/*
* We add a special packet command request to the tail of the request queue, and
- * wait for it to be serviced. This is not to be called from within the request
- * handling part of the driver! We allocate here data on the stack and it is
- * valid until the request is finished. This is not the case for the bottom part
- * of the driver, where we are always leaving the functions to wait for an
- * interrupt or a timer event.
- *
- * From the bottom part of the driver, we should allocate safe memory using
- * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
- * to the request list without waiting for it to be serviced! In that case, we
- * usually use idetape_queue_pc_head().
+ * wait for it to be serviced.
*/
static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists