| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <nifs94lqm5a3qjr3rm2p9mks5tad33cbmi@4ax.com>
Date: Sun, 10 Aug 2008 11:07:30 +1000
From: Grant Coady <grant_lkml@...o.com.au>
To: Alan Cox <alan@...rguk.ukuu.org.uk>
Cc: Krzysztof Halasa <khc@...waw.pl>,
"Robert P. J. Day" <rpjday@...shcourse.ca>,
Grant Coady <gcoady.lk@...il.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [RFC PATCH] cleanup Serial ATA and Parallel ATA Kconfig try2
On Sat, 9 Aug 2008 21:59:18 +0100, Alan Cox <alan@...rguk.ukuu.org.uk> wrote:
>> Even if we do, we can still sort the single driver list
>> alphabetically, and we can still "select ATA_SFF" instead of the other
>> way around.
>
>That I agree with entirely.
>
>Alan
Okay, here's another try:
¦ ¦ --- Serial ATA (SATA) and Parallel ATA (PATA) drivers ¦ ¦
¦ ¦ <*> AHCI SATA support ¦ ¦
¦ ¦ [*] ATA ACPI Support ¦ ¦
¦ ¦ [ ] SATA Port Multiplier support ¦ ¦
¦ ¦ < > Silicon Image 3124/3132 SATA support ¦ ¦
¦ ¦ [*] Parallel ATA (PATA) support ¦ ¦
¦ ¦ [*] Serial ATA (SATA) support ¦ ¦
¦ ¦ < > ACPI firmware driver for PATA ¦ ¦
¦ ¦ < > ALi PATA support (Experimental) ¦ ¦
¦ ¦ < > AMD/NVidia PATA support ¦ ¦
¦ ¦ < > ARTOP 6210/6260 PATA support ¦ ¦
¦ ¦ < > ATI PATA support ¦ ¦
¦ ¦ < > CMD640 PCI PATA support (Very Experimental) ¦ ¦
¦ ¦ < > CMD64x PATA support ¦ ¦
¦ ¦ < > CMD / Silicon Image 680 PATA support ¦ ¦
¦ ¦ < > Compaq Triflex PATA support ¦ ¦
¦ ¦ < > CS5510/5520 PATA support ¦ ¦
¦ ¦ < > CS5530 PATA support (Experimental) ¦ ¦
¦ ¦ < > Cypress CY82C693 PATA support (Very Experimental) ¦ ¦
¦ ¦ < > EFAR SLC90E66 support ¦ ¦
¦ ¦ < > Generic ATA support ¦ ¦
¦ ¦ < > HPT 366/368 PATA support ¦ ¦
¦ ¦ < > HPT 370/370A/371/372/374/302 PATA support (Experimental) ¦ ¦
¦ ¦ < > HPT 372N/302N PATA support (Very Experimental) ¦ ¦
¦ ¦ < > HPT 343/363 PATA support ¦ ¦
¦ ¦ < > Initio 162x SATA support (NEW) ¦ ¦
¦ ¦ < > Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support (NEW) ¦ ¦
¦ ¦ < > Intel PATA MPIIX support ¦ ¦
¦ ¦ < > Intel PATA old PIIX support ¦ ¦
¦ ¦ < > Intel SCH PATA support ¦ ¦
¦ ¦ < > IT8211/2 PATA support ¦ ¦
¦ ¦ < > IT8213 PATA support (Experimental) ¦ ¦
¦ ¦ <*> JMicron PATA support ¦ ¦
¦ ¦ < > Marvell PATA support via legacy mode ¦ ¦
¦ ¦ < > Marvell SATA support (HIGHLY EXPERIMENTAL) (NEW) ¦ ¦
¦ ¦ < > Nat Semi NS87410 PATA support (Experimental) ¦ ¦
¦ ¦ < > Nat Semi NS87415 PATA support (Experimental) ¦ ¦
¦ ¦ < > NETCELL Revolution RAID support ¦ ¦
¦ ¦ < > Ninja32/Delkin Cardbus ATA support (Experimental) ¦ ¦
¦ ¦ < > NVIDIA SATA support (NEW) ¦ ¦
¦ ¦ < > OPTI621/6215 PATA support (Very Experimental) ¦ ¦
¦ ¦ < > OPTI FireStar PATA support (Very Experimental) ¦ ¦
¦ ¦ < > Pacific Digital ADMA support (NEW) ¦ ¦
¦ ¦ < > Pacific Digital SATA QStor support (NEW) ¦ ¦
¦ ¦ < > Promise PATA 2027x support ¦ ¦
¦ ¦ < > Promise old PATA controller support (Experimental) ¦ ¦
¦ ¦ < > Promise SATA SX4 support (NEW) ¦ ¦
¦ ¦ < > Promise SATA TX2/TX4 support (NEW) ¦ ¦
¦ ¦ < > RADISYS 82600 PATA support (Very Experimental) ¦ ¦
¦ ¦ < > PC Tech RZ1000 PATA support ¦ ¦
¦ ¦ < > SC1200 PATA support (Very Experimental) ¦ ¦
¦ ¦ < > ServerWorks Frodo / Apple K2 SATA support (NEW) ¦ ¦
¦ ¦ < > ServerWorks OSB4/CSB5/CSB6/HT1000 PATA support ¦ ¦
¦ ¦ < > Silicon Image SATA support (NEW) ¦ ¦
¦ ¦ < > SiS 964/965/966/180 SATA support (NEW) ¦ ¦
¦ ¦ < > SiS PATA support (Experimental) ¦ ¦
¦ ¦ < > ULi Electronics SATA support (NEW) ¦ ¦
¦ ¦ < > VIA PATA support ¦ ¦
¦ ¦ < > VIA SATA support (NEW) ¦ ¦
¦ ¦ < > VITESSE VSC-7174 / INTEL 31244 SATA support (NEW) ¦ ¦
¦ ¦ < > Winbond SL82C105 PATA support ¦ ¦
From: Grant Coady <gcoady.lk@...il.com>
Cleanup ATA Kconfig
Cleanup ATA Kconfig, hide the SFF option behind new PATA and SATA menu
items, sort drivers into a single list, add missing "if unsure, say..."
help text.
Signed-off-by: Grant Coady <gcoady.lk@...il.com>
---
Kconfig | 555 +++++++++++++++++++++++++++++++++++++---------------------------
1 files changed, 328 insertions(+), 227 deletions(-)
--- linux-2.6.27-rc2/drivers/ata/Kconfig 2008-07-14 07:51:29.000000000 +1000
+++ linux-2.6.27-rc2d/drivers/ata/Kconfig 2008-08-10 10:57:33.642213799 +1000
@@ -3,7 +3,7 @@
#
menuconfig ATA
- tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+ tristate "Serial ATA (SATA) and Parallel ATA (PATA) drivers"
depends on HAS_IOMEM
depends on BLOCK
depends on !(M32R || M68K) || BROKEN
@@ -27,6 +27,14 @@
bool
default n
+config SATA_AHCI
+ tristate "AHCI SATA support"
+ depends on PCI
+ help
+ This option enables support for AHCI Serial ATA.
+
+ If unsure, say N.
+
config ATA_ACPI
bool "ATA ACPI Support"
depends on ACPI && PCI
@@ -41,28 +49,7 @@
You can disable this at kernel boot time by using the
option libata.noacpi=1
-config SATA_PMP
- bool "SATA Port Multiplier support"
- default y
- help
- This option adds support for SATA Port Multipliers
- (the SATA version of an ethernet hub, or SAS expander).
-
-config SATA_AHCI
- tristate "AHCI SATA support"
- depends on PCI
- help
- This option enables support for AHCI Serial ATA.
-
- If unsure, say N.
-
-config SATA_SIL24
- tristate "Silicon Image 3124/3132 SATA support"
- depends on PCI
- help
- This option enables support for Silicon Image 3124/3132 Serial ATA.
-
- If unsure, say N.
+ If unsure, say Y.
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
@@ -73,155 +60,82 @@
If unsure, say N.
-config ATA_SFF
- bool "ATA SFF support"
+config SATA_PMP
+ bool "SATA Port Multiplier support"
default y
help
- This option adds support for ATA controllers with SFF
- compliant or similar programming interface.
-
- SFF is the legacy IDE interface that has been around since
- the dawn of time. Almost all PATA controllers have an
- SFF interface. Many SATA controllers have an SFF interface
- when configured into a legacy compatibility mode.
-
- For users with exclusively modern controllers like AHCI,
- Silicon Image 3124, or Marvell 6440, you may choose to
- disable this uneeded SFF support.
+ This option adds support for SATA Port Multipliers
+ (the SATA version of an ethernet hub, or SAS expander).
If unsure, say Y.
-if ATA_SFF
-
-config SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support"
- depends on PCI
- help
- This option enables support for Broadcom/Serverworks/Apple K2
- SATA support.
-
- If unsure, say N.
-
-config ATA_PIIX
- tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
- depends on PCI
- help
- This option enables support for ICH5/6/7/8 Serial ATA
- and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
- host controllers.
-
- If unsure, say N.
-
-config SATA_MV
- tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This option enables support for the Marvell Serial ATA family.
- Currently supports 88SX[56]0[48][01] chips.
-
- If unsure, say N.
-
-config SATA_NV
- tristate "NVIDIA SATA support"
- depends on PCI
- help
- This option enables support for NVIDIA Serial ATA.
-
- If unsure, say N.
-
-config PDC_ADMA
- tristate "Pacific Digital ADMA support"
- depends on PCI
- help
- This option enables support for Pacific Digital ADMA controllers
-
- If unsure, say N.
-
-config SATA_QSTOR
- tristate "Pacific Digital SATA QStor support"
+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
help
- This option enables support for Pacific Digital Serial ATA QStor.
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
-config SATA_PROMISE
- tristate "Promise SATA TX2/TX4 support"
- depends on PCI
- help
- This option enables support for Promise Serial ATA TX2/TX4.
-
- If unsure, say N.
+config ATA_SFF
+ bool
+ default n
-config SATA_SX4
- tristate "Promise SATA SX4 support"
- depends on PCI && EXPERIMENTAL
+config ATA_SFF_PATA
+ bool "Parallel ATA (PATA) support"
+ default y
+ select ATA_SFF
help
- This option enables support for Promise Serial ATA SX4.
-
- If unsure, say N.
+ Say Y here if you want support for Parallel ATA (PATA) devices,
+ also known as IDE devices.
-config SATA_SIL
- tristate "Silicon Image SATA support"
- depends on PCI
- help
- This option enables support for Silicon Image Serial ATA.
+ This option enables a list of available PATA drivers.
- If unsure, say N.
+ You may turn this option off if running AHCI or similar devices.
-config SATA_SIS
- tristate "SiS 964/965/966/180 SATA support"
- depends on PCI
- select PATA_SIS
- help
- This option enables support for SiS Serial ATA on
- SiS 964/965/966/180 and Parallel ATA on SiS 180.
- The PATA support for SiS 180 requires additionally to
- enable the PATA_SIS driver in the config.
- If unsure, say N.
-
-config SATA_ULI
- tristate "ULi Electronics SATA support"
- depends on PCI
- help
- This option enables support for ULi Electronics SATA.
-
- If unsure, say N.
+ If unsure, say Y.
-config SATA_VIA
- tristate "VIA SATA support"
- depends on PCI
+config ATA_SFF_SATA
+ bool "Serial ATA (SATA) support"
+ default y
+ select ATA_SFF
help
- This option enables support for VIA Serial ATA.
+ Say Y here if you want support for Serial ATA (SATA) devices.
- If unsure, say N.
+ This option enables a list of available SATA drivers.
-config SATA_VITESSE
- tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
- depends on PCI
- help
- This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
+ You may turn this option off if running AHCI or similar devices.
- If unsure, say N.
+ If unsure, say Y.
-config SATA_INIC162X
- tristate "Initio 162x SATA support"
- depends on PCI
- help
- This option enables support for Initio 162x Serial ATA.
+if ATA_SFF
config PATA_ACPI
tristate "ACPI firmware driver for PATA"
depends on ATA_ACPI
+ depends on ATA_SFF_PATA
help
This option enables an ACPI method driver which drives
motherboard PATA controller interfaces through the ACPI
firmware in the BIOS. This driver can sometimes handle
otherwise unsupported hardware.
+ If unsure, say Y.
+
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
+ depends on ATA_SFF_PATA
+ help
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.
+
+ If unsure, say N.
+
config PATA_ALI
tristate "ALi PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the ALi ATA interfaces
found on the many ALi chipsets.
@@ -231,6 +145,7 @@
config PATA_AMD
tristate "AMD/NVidia PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the AMD and NVidia PATA
interfaces found on the chipsets for Athlon/Athlon64.
@@ -240,6 +155,7 @@
config PATA_ARTOP
tristate "ARTOP 6210/6260 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for ARTOP PATA controllers.
@@ -248,6 +164,7 @@
config PATA_AT32
tristate "Atmel AVR32 PATA support (Experimental)"
depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the IDE devices on the
Atmel AT32AP platform.
@@ -257,15 +174,27 @@
config PATA_ATIIXP
tristate "ATI PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the ATI ATA interfaces
found on the many ATI chipsets.
If unsure, say N.
+config PATA_BF54X
+ tristate "Blackfin 54x ATAPI support"
+ depends on BF542 || BF548 || BF549
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for the built-in ATAPI controller on
+ Blackfin 54x family chips.
+
+ If unsure, say N.
+
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the CMD640 PCI IDE
interface chip. Only the primary channel is currently
@@ -276,15 +205,36 @@
config PATA_CMD64X
tristate "CMD64x PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the CMD64x series chips
except for the CMD640.
If unsure, say N.
+config PATA_SIL680
+ tristate "CMD / Silicon Image 680 PATA support"
+ depends on PCI
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for CMD / Silicon Image 680 PATA.
+
+ If unsure, say N.
+
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ depends on ATA_SFF_PATA
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_CS5520
tristate "CS5510/5520 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the Cyrix 5510/5520
companion chip used with the MediaGX/Geode processor family.
@@ -294,6 +244,7 @@
config PATA_CS5530
tristate "CS5530 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
companion chip used with the MediaGX/Geode processor family.
@@ -303,6 +254,7 @@
config PATA_CS5535
tristate "CS5535 PATA support (Experimental)"
depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the NatSemi/AMD CS5535
companion chip used with the Geode processor family.
@@ -312,6 +264,7 @@
config PATA_CS5536
tristate "CS5536 PATA support (Experimental)"
depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
@@ -321,6 +274,7 @@
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the Cypress/Contaq CY82C693
chipset found in some Alpha systems
@@ -330,15 +284,27 @@
config PATA_EFAR
tristate "EFAR SLC90E66 support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the EFAR SLC90E66
IDE controller found on some older machines.
If unsure, say N.
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
config ATA_GENERIC
tristate "Generic ATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for generic BIOS configured
ATA controllers via the new ATA layer
@@ -348,6 +314,7 @@
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the HPT 366 and 368
PATA controllers via the new ATA layer.
@@ -357,6 +324,7 @@
config PATA_HPT37X
tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the majority of the later HPT
PATA controllers via the new ATA layer.
@@ -366,6 +334,7 @@
config PATA_HPT3X2N
tristate "HPT 372N/302N PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the N variant HPT PATA
controllers via the new ATA layer
@@ -375,6 +344,7 @@
config PATA_HPT3X3
tristate "HPT 343/363 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the HPT 343/363
PATA controllers via the new ATA layer
@@ -384,14 +354,64 @@
config PATA_HPT3X3_DMA
bool "HPT 343/363 DMA support (Experimental)"
depends on PATA_HPT3X3
+ depends on ATA_SFF_PATA
help
This option enables DMA support for the HPT343/363
controllers. Enable with care as there are still some
problems with DMA on this chipset.
+config SATA_INIC162X
+ tristate "Initio 162x SATA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Initio 162x Serial ATA.
+
+ If unsure, say N.
+
+config ATA_PIIX
+ tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
+ depends on PCI
+ depends on ATA_SFF_PATA_SUPPORT || ATA_SFF_SATA
+ help
+ This option enables support for ICH5/6/7/8 Serial ATA
+ and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
+ host controllers.
+
+ If unsure, say N.
+
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support"
+ depends on PCI
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for early PIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_SCH
+ tristate "Intel SCH PATA support"
+ depends on PCI
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
+
+ If unsure, say N.
+
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support (Experimental)"
depends on EXPERIMENTAL && ISAPNP
+ depends on ATA_SFF_PATA
help
This option enables support for ISA plug & play ATA
controllers such as those found on old soundcards.
@@ -401,6 +421,7 @@
config PATA_IT821X
tristate "IT8211/2 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the ITE 8211 and 8212
PATA controllers via the new ATA layer, including RAID
@@ -411,15 +432,28 @@
config PATA_IT8213
tristate "IT8213 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the ITE 821 PATA
controllers via the new ATA layer.
If unsure, say N.
+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
config PATA_JMICRON
tristate "JMicron PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
Enable support for the JMicron IDE controller, via the new
ATA layer.
@@ -429,58 +463,57 @@
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
depends on ISA && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for ISA/VLB bus legacy PATA
ports and allows them to be accessed via the new ATA layer.
If unsure, say N.
-config PATA_TRIFLEX
- tristate "Compaq Triflex PATA support"
- depends on PCI
- help
- Enable support for the Compaq 'Triflex' IDE controller as found
- on many Compaq Pentium-Pro systems, via the new ATA layer.
-
- If unsure, say N.
-
config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables limited support for the Marvell 88SE6145 ATA
controller.
If unsure, say N.
-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx
+config SATA_MV
+ tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on ATA_SFF_SATA
help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
+ This option enables support for the Marvell Serial ATA family.
+ Currently supports 88SX[56]0[48][01] chips.
If unsure, say N.
-config PATA_MPIIX
- tristate "Intel PATA MPIIX support"
- depends on PCI
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
- This option enables support for MPIIX PATA support.
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.
If unsure, say N.
-config PATA_OLDPIIX
- tristate "Intel PATA old PIIX support"
- depends on PCI
+config PATA_NS87415
+ tristate "Nat Semi NS87415 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
- This option enables support for early PIIX PATA support.
+ This option enables support for the National Semiconductor
+ NS87415 PCI-IDE controller.
If unsure, say N.
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the Netcell Revolution RAID
PATA controller.
@@ -490,33 +523,26 @@
config PATA_NINJA32
tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the Ninja32, Delkin and
possibly other brands of Cardbus ATA adapter
If unsure, say N.
-config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for the National Semiconductor
- NS87410 PCI-IDE controller.
-
- If unsure, say N.
-
-config PATA_NS87415
- tristate "Nat Semi NS87415 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+config SATA_NV
+ tristate "NVIDIA SATA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
help
- This option enables support for the National Semiconductor
- NS87415 PCI-IDE controller.
+ This option enables support for NVIDIA Serial ATA.
If unsure, say N.
config PATA_OPTI
tristate "OPTI621/6215 PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables full PIO support for the early Opti ATA
controllers found on some old motherboards.
@@ -526,6 +552,7 @@
config PATA_OPTIDMA
tristate "OPTI FireStar PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
@@ -533,33 +560,85 @@
If unsure, say N.
+config PDC_ADMA
+ tristate "Pacific Digital ADMA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Pacific Digital ADMA controllers
+
+ If unsure, say N.
+
+config SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
+ depends on ATA_SFF_PATA
help
This option enables support for PCMCIA ATA interfaces, including
compact flash card adapters via the new ATA layer.
If unsure, say N.
+config PATA_PDC2027X
+ tristate "Promise PATA 2027x support"
+ depends on PCI
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for Promise PATA pdc20268
+ to pdc20277 host adapters.
+
+ If unsure, say N.
+
config PATA_PDC_OLD
- tristate "Older Promise PATA controller support (Experimental)"
+ tristate "Promise old PATA controller support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
If unsure, say N.
+config SATA_SX4
+ tristate "Promise SATA SX4 support"
+ depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Promise Serial ATA SX4.
+
+ If unsure, say N.
+
+config SATA_PROMISE
+ tristate "Promise SATA TX2/TX4 support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
config PATA_QDI
tristate "QDI VLB PATA support"
depends on ISA
+ depends on ATA_SFF_PATA
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
+ If unsure, say N.
+
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the RADISYS 82600
PATA controllers via the new ATA layer
@@ -569,6 +648,7 @@
config PATA_RB532
tristate "RouterBoard 532 PATA CompactFlash support"
depends on MIKROTIK_RB532
+ depends on ATA_SFF_PATA
help
This option enables support for the RouterBoard 532
PATA CompactFlash controller.
@@ -578,6 +658,7 @@
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables basic support for the PC Tech RZ1000/1
PATA controllers via the new ATA layer
@@ -587,57 +668,116 @@
config PATA_SC1200
tristate "SC1200 PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
If unsure, say N.
+config SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
config PATA_SERVERWORKS
- tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
+ tristate "ServerWorks OSB4/CSB5/CSB6/HT1000 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
HT1000 PATA controllers, via the new ATA layer.
If unsure, say N.
-config PATA_PDC2027X
- tristate "Promise PATA 2027x support"
+config SATA_SIL
+ tristate "Silicon Image SATA support"
depends on PCI
+ depends on ATA_SFF_SATA
help
- This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+ This option enables support for Silicon Image Serial ATA.
If unsure, say N.
-config PATA_SIL680
- tristate "CMD / Silicon Image 680 PATA support"
+config SATA_SIS
+ tristate "SiS 964/965/966/180 SATA support"
depends on PCI
+ depends on ATA_SFF_SATA
+ select PATA_SIS
help
- This option enables support for CMD / Silicon Image 680 PATA.
+ This option enables support for SiS Serial ATA on
+ SiS 964/965/966/180 and Parallel ATA on SiS 180.
+ The PATA support for SiS 180 requires additionally to
+ enable the PATA_SIS driver in the config.
If unsure, say N.
config PATA_SIS
tristate "SiS PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
This option enables support for SiS PATA controllers
If unsure, say N.
+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_CELLEB
+ depends on ATA_SFF_PATA
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
+config SATA_ULI
+ tristate "ULi Electronics SATA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for ULi Electronics SATA.
+
+ If unsure, say N.
+
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for the VIA PATA interfaces
found on the many VIA chipsets.
If unsure, say N.
+config SATA_VIA
+ tristate "VIA SATA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for VIA Serial ATA.
+
+ If unsure, say N.
+
+config SATA_VITESSE
+ tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
+ depends on PCI
+ depends on ATA_SFF_SATA
+ help
+ This option enables support for Vitesse VSC7174 and
+ Intel 31244 Serial ATA.
+
+ If unsure, say N.
+
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
depends on PCI
+ depends on ATA_SFF_PATA
help
This option enables support for SL82C105 PATA devices found in the
Netwinder and some other systems
@@ -647,12 +787,16 @@
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
depends on ISA && EXPERIMENTAL
+ depends on ATA_SFF_PATA
help
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
+ If unsure, say N.
+
config HAVE_PATA_PLATFORM
bool
+ depends on ATA_SFF_PATA
help
This is an internal configuration node for any machine that
uses pata-platform driver to enable the relevant driver in the
@@ -662,6 +806,7 @@
config PATA_PLATFORM
tristate "Generic platform device PATA support"
depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
+ depends on ATA_SFF_PATA
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems.
@@ -671,6 +816,7 @@
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
depends on PATA_PLATFORM && PPC_OF
+ depends on ATA_SFF_PATA
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems with OpenFirmware
@@ -678,50 +824,5 @@
If unsure, say N.
-config PATA_ICSIDE
- tristate "Acorn ICS PATA support"
- depends on ARM && ARCH_ACORN
- help
- On Acorn systems, say Y here if you wish to use the ICS PATA
- interface card. This is not required for ICS partition support.
- If you are unsure, say N to this.
-
-config PATA_IXP4XX_CF
- tristate "IXP4XX Compact Flash support"
- depends on ARCH_IXP4XX
- help
- This option enables support for a Compact Flash connected on
- the ixp4xx expansion bus. This driver had been written for
- Loft/Avila boards in mind but can work with others.
-
- If unsure, say N.
-
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
- help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
-
- If unsure, say N.
-
-config PATA_SCH
- tristate "Intel SCH PATA support"
- depends on PCI
- help
- This option enables support for Intel SCH PATA on the Intel
- SCH (US15W, US15L, UL11L) series host controllers.
-
- If unsure, say N.
-
-config PATA_BF54X
- tristate "Blackfin 54x ATAPI support"
- depends on BF542 || BF548 || BF549
- help
- This option enables support for the built-in ATAPI controller on
- Blackfin 54x family chips.
-
- If unsure, say N.
-
endif # ATA_SFF
endif # ATA
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists