| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200808111433.41280.tobias@himmer-online.de>
Date: Mon, 11 Aug 2008 14:33:41 +0200
From: Tobias Himmer <tobias@...mer-online.de>
To: lm-sensors@...sensors.org
Cc: linux-kernel@...r.kernel.org, bigeasy@...utronix.de,
hjk@...utronix.de, fishor@...l.ru, khali@...ux-fr.org,
akpm@...ux-foundation.org
Subject: [PATCH] hwmon: Included max1618 support in max1619 driver
Hi,
I modified the existing max1619 driver in order to support the MAX1618 chip,
a stripped down version of the MAX1619.
Tobias
Signed-off-by: Tobias Himmer <tobias@...mer-online.de>
---
drivers/hwmon/Kconfig | 3 +-
drivers/hwmon/max1619.c | 204 +++++++++++++++++++++++++++++++----------------
2 files changed, 138 insertions(+), 69 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 00ff533..374b282 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -507,7 +507,8 @@ config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
help
- If you say yes here you get support for MAX1619 sensor chip.
+ If you say yes here you get support for Maxim MAX1619 and MAX1618
+ sensor chips.
This driver can also be built as a module. If so, the module
will be called max1619.
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 7e7267a..5788808 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -3,12 +3,15 @@
* monitoring
* Copyright (C) 2003-2004 Alexey Fisher <fishor@...l.ru>
* Jean Delvare <khali@...ux-fr.org>
+ * Tobias Himmer <tobias@...mer-online.de>
*
* Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
- * It reports up to two temperatures (its own plus up to
- * one external one). Complete datasheet can be
- * obtained from Maxim's website at:
+ * It reports up to two temperatures (its own plus up to one external one).
+ * This driver will also work on the MAX1618, a stripped down version with
+ * only one (external) temperature source.
+ * Complete datasheets can be obtained from Maxim's website at:
* http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
+ * http://pdfserv.maxim-ic.com/en/ds/MAX1618.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -44,7 +47,7 @@ static const unsigned short normal_i2c[] = {
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_1(max1619);
+I2C_CLIENT_INSMOD_2(max1619, max1618);
/*
* The MAX1619 registers
@@ -80,8 +83,7 @@ I2C_CLIENT_INSMOD_1(max1619);
*/
static int max1619_attach_adapter(struct i2c_adapter *adapter);
-static int max1619_detect(struct i2c_adapter *adapter, int address,
- int kind);
+static int max1619_detect(struct i2c_adapter *adapter, int address, int kind);
static void max1619_init_client(struct i2c_client *client);
static int max1619_detach_client(struct i2c_client *client);
static struct max1619_data *max1619_update_device(struct device *dev);
@@ -106,37 +108,54 @@ struct max1619_data {
struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
+ const struct attribute_group *group;
+ int kind; /* detected chip ( max1619 / max1618 ) */
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
/* registers values */
- u8 temp_input1; /* local */
- u8 temp_input2, temp_low2, temp_high2; /* remote */
- u8 temp_crit2;
- u8 temp_hyst2;
- u8 alarms;
+ u8 local;
+ u8 remote;
+ u8 remote_low, remote_high;
+ u8 remote_crit, remote_hyst;
+ u8 alarms;
};
/*
* Sysfs stuff
*/
+static ssize_t show_temp1_input(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct max1619_data *data = max1619_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG((data->kind == max1618)?
+ data->remote : data->local));
+}
+
+static ssize_t show_temp2_input(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct max1619_data *data = max1619_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->remote));
+}
+
#define show_temp(value) \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct max1619_data *data = max1619_update_device(dev); \
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
}
-show_temp(temp_input1);
-show_temp(temp_input2);
-show_temp(temp_low2);
-show_temp(temp_high2);
-show_temp(temp_crit2);
-show_temp(temp_hyst2);
-
-#define set_temp2(value, reg) \
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
+
+show_temp(remote_low);
+show_temp(remote_high);
+show_temp(remote_crit);
+show_temp(remote_hyst);
+
+#define set_temp(value, reg) \
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct max1619_data *data = i2c_get_clientdata(client); \
@@ -149,12 +168,13 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
return count; \
}
-set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW);
-set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH);
-set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT);
-set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST);
+set_temp(remote_low, MAX1619_REG_W_REMOTE_LOW);
+set_temp(remote_high, MAX1619_REG_W_REMOTE_HIGH);
+set_temp(remote_crit, MAX1619_REG_W_REMOTE_CRIT);
+set_temp(remote_hyst, MAX1619_REG_W_TCRIT_HYST);
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct max1619_data *data = max1619_update_device(dev);
return sprintf(buf, "%d\n", data->alarms);
@@ -168,22 +188,49 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
}
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
-static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
-static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
- set_temp_low2);
-static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
- set_temp_high2);
-static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
- set_temp_crit2);
-static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2,
- set_temp_hyst2);
+/* These are for both - MAX1619 and MAX1618 */
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/* These are just for MAX1619 */
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp2_input, NULL);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_low,
+ set_remote_low);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_high,
+ set_remote_high);
+static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_remote_crit,
+ set_remote_crit);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_remote_hyst,
+ set_remote_hyst);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+/* These are just for MAX1618 */
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_remote_low,
+ set_remote_low);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_remote_high,
+ set_remote_high);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+
+static struct attribute *max1618_attributes[] = {
+ &dev_attr_temp1_input.attr,
+ &dev_attr_temp1_min.attr,
+ &dev_attr_temp1_max.attr,
+
+ &dev_attr_alarms.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group max1618_group = {
+ .attrs = max1618_attributes,
+};
static struct attribute *max1619_attributes[] = {
&dev_attr_temp1_input.attr,
&dev_attr_temp2_input.attr,
@@ -256,9 +303,9 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
*/
if (kind < 0) { /* detection */
reg_config = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CONFIG);
+ MAX1619_REG_R_CONFIG);
reg_convrate = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CONVRATE);
+ MAX1619_REG_R_CONVRATE);
reg_status = i2c_smbus_read_byte_data(new_client,
MAX1619_REG_R_STATUS);
if ((reg_config & 0x03) != 0x00
@@ -272,14 +319,24 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
if (kind <= 0) { /* identification */
u8 man_id, chip_id;
-
+
man_id = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_MAN_ID);
+ MAX1619_REG_R_MAN_ID);
chip_id = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CHIP_ID);
-
- if ((man_id == 0x4D) && (chip_id == 0x04))
- kind = max1619;
+ MAX1619_REG_R_CHIP_ID);
+
+ if (man_id == 0x4D) {
+ switch (chip_id) {
+ case 0x04:
+ kind = max1619;
+ name = "max1619";
+ break;
+ case 0x02:
+ kind = max1618;
+ name = "max1618";
+ break;
+ }
+ }
if (kind <= 0) { /* identification failed */
dev_info(&adapter->dev,
@@ -289,8 +346,7 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
}
}
- if (kind == max1619)
- name = "max1619";
+ data->kind = kind;
/* We can fill in the remaining client fields */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
@@ -305,7 +361,13 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
max1619_init_client(new_client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group)))
+ if (kind == max1618)
+ data->group = &max1618_group;
+ else
+ data->group = &max1619_group;
+
+ err = sysfs_create_group(&new_client->dev.kobj, data->group);
+ if (err)
goto exit_detach;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
@@ -317,7 +379,7 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &max1619_group);
+ sysfs_remove_group(&new_client->dev.kobj, data->group);
exit_detach:
i2c_detach_client(new_client);
exit_free:
@@ -347,7 +409,8 @@ static int max1619_detach_client(struct i2c_client *client)
int err;
hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &max1619_group);
+
+ sysfs_remove_group(&client->dev.kobj, data->group);
if ((err = i2c_detach_client(client)))
return err;
@@ -365,21 +428,25 @@ static struct max1619_data *max1619_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Updating max1619 data.\n");
- data->temp_input1 = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_LOCAL_TEMP);
- data->temp_input2 = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_REMOTE_TEMP);
- data->temp_high2 = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_REMOTE_HIGH);
- data->temp_low2 = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_REMOTE_LOW);
- data->temp_crit2 = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_REMOTE_CRIT);
- data->temp_hyst2 = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_TCRIT_HYST);
- data->alarms = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_STATUS);
-
+ switch (data->kind) {
+ default:
+ data->local = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_LOCAL_TEMP);
+ data->remote_crit = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_REMOTE_CRIT);
+ data->remote_hyst = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_TCRIT_HYST);
+ /* fallthrough */
+ case max1618:
+ data->remote = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_REMOTE_TEMP);
+ data->remote_high = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_REMOTE_HIGH);
+ data->remote_low = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_REMOTE_LOW);
+ data->alarms = i2c_smbus_read_byte_data(
+ client, MAX1619_REG_R_STATUS);
+ }
data->last_updated = jiffies;
data->valid = 1;
}
@@ -399,9 +466,10 @@ static void __exit sensors_max1619_exit(void)
i2c_del_driver(&max1619_driver);
}
-MODULE_AUTHOR("Alexey Fisher <fishor@...l.ru> and "
- "Jean Delvare <khali@...ux-fr.org>");
-MODULE_DESCRIPTION("MAX1619 sensor driver");
+MODULE_AUTHOR("Alexey Fisher <fishor@...l.ru>, "
+ "Jean Delvare <khali@...ux-fr.org>,"
+ "Tobias Himmer <tobias@...mer-online.de>");
+MODULE_DESCRIPTION("MAX1619 / MAX1618 sensor driver");
MODULE_LICENSE("GPL");
module_init(sensors_max1619_init);
--
1.5.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists