[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1218588904.3209.13.camel@rzhang-dt>
Date: Wed, 13 Aug 2008 08:55:04 +0800
From: Zhang Rui <rui.zhang@...el.com>
To: Pavel Machek <pavel@...e.cz>
Cc: Andi Kleen <andi@...stfloor.org>,
kernel list <linux-kernel@...r.kernel.org>,
ACPI mailing list <linux-acpi@...r.kernel.org>
Subject: Re: 2.6.27-rc1: critical thermal shutdown on thinkpad x60
On Tue, 2008-08-12 at 11:41 +0200, Pavel Machek wrote:
> Hi!
>
> > > Aug 6 11:00:10 amd kernel: ACPI: Critical trip point
> > > Aug 6 11:00:10 amd kernel: Critical temperature reached (128 C),
> > > shutting down.
> > > Aug 6 11:00:10 amd shutdown[24414]: shutting down for system halt
> > >
> > > ...and machine went down at that point :-(.
> >
> > I hope you can easily reproduce it?
> >
> > So it's new in 2.6.27rc1 and wasn't in 2.6.26? Can you please
>
> Yes, I'm very sure. It makes machine basically unusable.
>
> > double check that? Are there are new warnings in the boot logs
> > from ACPI compared to .26?
>
> Will take a look.... ... I don't see anything obvious, diff is below.
>
> > I looked through the pile of patches that went in for ACPI and the
> > only candidate that might have imho caused this would be
> > ea51011a27db48ea0a80a5e20de3969b292d5d4d. Can you please
> > try reverting that. If that doesn't help a full bisect will be needed.
>
> Not that one :-(. Thinkpad does not even have fan device: it is
> controlled by hardware.
> Pavel
>
> --- /tmp/dmesg.26 2008-08-12 11:38:44.000000000 +0200
> +++ /tmp/dmesg.rc2 2008-08-12 11:15:44.000000000 +0200
> @@ -1,4 +1,4 @@
> -Linux version 2.6.26 (pavel@amd) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #313 SMP Mon Jul 14 08:33:14 CEST 2008
> +Linux version 2.6.27-rc2 (pavel@amd) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #322 SMP Thu Aug 7 11:58:09 CEST 2008
> PAT disabled. Not yet verified on this CPU type.
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> @@ -16,31 +16,13 @@
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> -1142MB HIGHMEM available.
> -896MB LOWMEM available.
> -found SMP MP-table at [c00f67f0] 000f67f0
> -Entering add_active_range(0, 0, 521936) 0 entries of 256 used
> -Zone PFN ranges:
> - DMA 0 -> 4096
> - Normal 4096 -> 229376
> - HighMem 229376 -> 521936
> -Movable zone start PFN for each node
> -early_node_map[1] active PFN ranges
> - 0: 0 -> 521936
> -On node 0 totalpages: 521936
> - DMA zone: 32 pages used for memmap
> - DMA zone: 0 pages reserved
> - DMA zone: 4064 pages, LIFO batch:0
> - Normal zone: 1760 pages used for memmap
> - Normal zone: 223520 pages, LIFO batch:31
> - HighMem zone: 2286 pages used for memmap
> - HighMem zone: 290274 pages, LIFO batch:31
> - Movable zone: 0 pages used for memmap
> +last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
> +kernel direct mapping tables up to 38000000 @ 7000-c000
> DMI present.
> ACPI: RSDP 000F67C0, 0024 (r2 LENOVO)
> ACPI: XSDT 7F6D191C, 0084 (r1 LENOVO TP-7B 2140 LTP 0)
> ACPI: FACP 7F6D1A00, 00F4 (r3 LENOVO TP-7B 2140 LNVO 1)
> -ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080321]
> +ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
> ACPI: DSDT 7F6D1D90, CFB9 (r1 LENOVO TP-7B 2140 MSFT 100000E)
> ACPI: FACS 7F6F4000, 0040
> ACPI: SSDT 7F6D1BB4, 01DC (r1 LENOVO TP-7B 2140 MSFT 100000E)
> @@ -54,6 +36,37 @@
> ACPI: SSDT 7F6F28A4, 00A6 (r1 LENOVO TP-7B 2140 INTL 20050513)
> ACPI: SSDT 7F6F294A, 04F7 (r1 LENOVO TP-7B 2140 INTL 20050513)
> ACPI: SSDT 7F6F2E41, 01D8 (r1 LENOVO TP-7B 2140 INTL 20050513)
> +1142MB HIGHMEM available.
> +896MB LOWMEM available.
> + mapped low ram: 0 - 38000000
> + low ram: 00000000 - 38000000
> + bootmap 00008000 - 0000f000
> +(8 early reservations) ==> bootmem [0000000000 - 0038000000]
> + #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> + #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
> + #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
> + #3 [0000200000 - 0000c07128] TEXT DATA BSS ==> [0000200000 - 0000c07128]
> + #4 [0000c08000 - 0000c1d000] INIT_PG_TABLE ==> [0000c08000 - 0000c1d000]
> + #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
> + #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
> + #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
> +Scan SMP from c0000000 for 1024 bytes.
> +Scan SMP from c009fc00 for 1024 bytes.
> +Scan SMP from c00f0000 for 65536 bytes.
> +found SMP MP-table at [c00f67f0] 000f67f0
> +Zone PFN ranges:
> + DMA 0x00000000 -> 0x00001000
> + Normal 0x00001000 -> 0x00038000
> + HighMem 0x00038000 -> 0x0007f6d0
> +Movable zone start PFN for each node
> +early_node_map[2] active PFN ranges
> + 0: 0x00000000 -> 0x0000009f
> + 0: 0x00000100 -> 0x0007f6d0
> +On node 0 totalpages: 521839
> +free_area_init_node: node 0, pgdat c0942e80, node_mem_map c1001000
> + DMA zone: 3967 pages, LIFO batch:0
> + Normal zone: 223520 pages, LIFO batch:31
> + HighMem zone: 290274 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x1008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> @@ -70,26 +83,27 @@
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> -Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
> +SMP: Allowing 2 CPUs, 0 hotplug CPUs
> +mapped APIC to ffffb000 (fee00000)
> +mapped IOAPIC to ffffa000 (fec00000)
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
> PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
> PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
> PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
> -SMP: Allowing 2 CPUs, 0 hotplug CPUs
> -PERCPU: Allocating 37800 bytes of per cpu data
> -NR_CPUS: 2, nr_cpu_ids: 2
> -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517858
> +Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
> +PERCPU: Allocating 37552 bytes of per cpu data
> +NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
> +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761
> Kernel command line: root=/dev/sda4 resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=791 init=/tmp/swsusp-init acpi_sleep=s3_bios,s3_mode no_console_suspend
> Unknown boot option `psmouse.psmouse_proto=imps': ignoring
> -mapped APIC to ffffb000 (fee00000)
> -mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Extended CMOS year: 2000
> -Detected 1828.792 MHz processor.
> +TSC calibrated against PM_TIMER
> +Detected 1828.748 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> @@ -100,23 +114,23 @@
> ... MAX_LOCKDEP_ENTRIES: 8192
> ... MAX_LOCKDEP_CHAINS: 16384
> ... CHAINHASH_SIZE: 8192
> - memory used by lock dependency info: 992 kB
> + memory used by lock dependency info: 1056 kB
> per task-struct memory footprint: 1920 bytes
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> -Memory: 2059068k/2087744k available (5320k kernel code, 27516k reserved, 2458k data, 320k init, 1170240k highmem)
> +Memory: 2058760k/2087744k available (5438k kernel code, 27692k reserved, 2511k data, 344k init, 1170240k highmem)
> virtual kernel memory layout:
> - fixmap : 0xfff7f000 - 0xfffff000 ( 512 kB)
> + fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> - .init : 0xc09a1000 - 0xc09f1000 ( 320 kB)
> - .data : 0xc0732166 - 0xc0998a08 (2458 kB)
> - .text : 0xc0200000 - 0xc0732166 (5320 kB)
> + .init : 0xc09cb000 - 0xc0a21000 ( 344 kB)
> + .data : 0xc074fbc6 - 0xc09c38f0 (2511 kB)
> + .text : 0xc0200000 - 0xc074fbc6 (5438 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> CPA: page pool initialized 32 of 32 pages preallocated
> hpet clockevent registered
> -Calibrating delay using timer specific routine.. 3662.04 BogoMIPS (lpj=7324080)
> +Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.49 BogoMIPS (lpj=7314992)
> Mount-cache hash table entries: 512
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> @@ -124,7 +138,7 @@
> CPU: Processor Core ID: 0
> using mwait in idle threads.
> Checking 'hlt' instruction... OK.
> -ACPI: Core revision 20080321
> +ACPI: Core revision 20080609
that's weird.
ACPICA should be 20080609 in 2.6.26.
Pavel, can you please make a double check? :)
thanks,
rui
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists