| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Aug 2008 17:36:51 +0200
From: Takashi Iwai <tiwai@...e.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org
Subject: [GIT PULL] ALSA fix for 2.6.27-rc3
Linus,
please pull ALSA update for 2.6.27-rc3 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
containing the following change. This is an additional support of a
missing model, so fairly safe to apply.
Thanks!
Takashi
===
Clemens Ladisch (1):
ALSA: virtuoso: add Xonar D1 support
Documentation/sound/alsa/ALSA-Configuration.txt | 10 +---
sound/pci/Kconfig | 2 +-
sound/pci/oxygen/virtuoso.c | 73 +++++++++++++++++------
3 files changed, 58 insertions(+), 27 deletions(-)
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 6f6d117..b117e42 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1144,8 +1144,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-ice1712
------------------
@@ -1628,8 +1626,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-pcsp
-----------------
@@ -2081,13 +2077,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-virtuoso
-------------------
- Module for sound cards based on the Asus AV200 chip, i.e.,
- Xonar D2 and Xonar D2X.
+ Module for sound cards based on the Asus AV100/AV200 chips,
+ i.e., Xonar D1, DX, D2 and D2X.
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-vx222
----------------
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index f7d95b2..31f52d3 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -845,7 +845,7 @@ config SND_VIRTUOSO
select SND_OXYGEN_LIB
help
Say Y here to include support for sound cards based on the
- Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 9a2c16b..01d7b75 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -36,15 +36,15 @@
*/
/*
- * Xonar DX
- * --------
+ * Xonar D1/DX
+ * -----------
*
* CMI8788:
*
* I²C <-> CS4398 (front)
* <-> CS4362A (surround, center/LFE, back)
*
- * GPI 0 <- external power present
+ * GPI 0 <- external power present (DX only)
*
* GPIO 0 -> enable output to speakers
* GPIO 1 -> enable front panel I/O
@@ -96,6 +96,7 @@ MODULE_PARM_DESC(enable, "enable card");
enum {
MODEL_D2,
MODEL_D2X,
+ MODEL_D1,
MODEL_DX,
};
@@ -103,6 +104,7 @@ static struct pci_device_id xonar_ids[] __devinitdata = {
{ OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 },
{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
+ { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
{ }
};
MODULE_DEVICE_TABLE(pci, xonar_ids);
@@ -313,15 +315,12 @@ static void cs43xx_init(struct oxygen *chip)
cs4362a_write(chip, 0x01, CS4362A_CPEN);
}
-static void xonar_dx_init(struct oxygen *chip)
+static void xonar_d1_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
data->anti_pop_delay = 800;
data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
- data->ext_power_reg = OXYGEN_GPI_DATA;
- data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
- data->ext_power_bit = GPI_DX_EXT_POWER;
data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
data->cs4362a_fm = CS4362A_FM_SINGLE |
CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
@@ -345,6 +344,16 @@ static void xonar_dx_init(struct oxygen *chip)
snd_component_add(chip->card, "CS5361");
}
+static void xonar_dx_init(struct oxygen *chip)
+{
+ struct xonar_data *data = chip->model_data;
+
+ data->ext_power_reg = OXYGEN_GPI_DATA;
+ data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+ data->ext_power_bit = GPI_DX_EXT_POWER;
+ xonar_d1_init(chip);
+}
+
static void xonar_cleanup(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
@@ -352,7 +361,7 @@ static void xonar_cleanup(struct oxygen *chip)
oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
}
-static void xonar_dx_cleanup(struct oxygen *chip)
+static void xonar_d1_cleanup(struct oxygen *chip)
{
xonar_cleanup(chip);
cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
@@ -365,7 +374,7 @@ static void xonar_d2_resume(struct oxygen *chip)
xonar_enable_output(chip);
}
-static void xonar_dx_resume(struct oxygen *chip)
+static void xonar_d1_resume(struct oxygen *chip)
{
cs43xx_init(chip);
xonar_enable_output(chip);
@@ -513,7 +522,7 @@ static const struct snd_kcontrol_new front_panel_switch = {
.put = front_panel_put,
};
-static void xonar_dx_ac97_switch(struct oxygen *chip,
+static void xonar_d1_ac97_switch(struct oxygen *chip,
unsigned int reg, unsigned int mute)
{
if (reg == AC97_LINE) {
@@ -536,7 +545,7 @@ static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
return 0;
}
-static int xonar_dx_control_filter(struct snd_kcontrol_new *template)
+static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
{
if (!strncmp(template->name, "CD Capture ", 11))
return 1; /* no CD input */
@@ -548,7 +557,7 @@ static int xonar_mixer_init(struct oxygen *chip)
return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
}
-static int xonar_dx_mixer_init(struct oxygen *chip)
+static int xonar_d1_mixer_init(struct oxygen *chip)
{
return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
}
@@ -615,23 +624,51 @@ static const struct oxygen_model xonar_models[] = {
.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
},
+ [MODEL_D1] = {
+ .shortname = "Xonar D1",
+ .longname = "Asus Virtuoso 100",
+ .chip = "AV200",
+ .owner = THIS_MODULE,
+ .init = xonar_d1_init,
+ .control_filter = xonar_d1_control_filter,
+ .mixer_init = xonar_d1_mixer_init,
+ .cleanup = xonar_d1_cleanup,
+ .suspend = xonar_d1_cleanup,
+ .resume = xonar_d1_resume,
+ .set_dac_params = set_cs43xx_params,
+ .set_adc_params = set_cs53x1_params,
+ .update_dac_volume = update_cs43xx_volume,
+ .update_dac_mute = update_cs43xx_mute,
+ .ac97_switch = xonar_d1_ac97_switch,
+ .dac_tlv = cs4362a_db_scale,
+ .model_data_size = sizeof(struct xonar_data),
+ .pcm_dev_cfg = PLAYBACK_0_TO_I2S |
+ PLAYBACK_1_TO_SPDIF |
+ CAPTURE_0_FROM_I2S_2,
+ .dac_channels = 8,
+ .dac_volume_min = 0,
+ .dac_volume_max = 127,
+ .function_flags = OXYGEN_FUNCTION_2WIRE,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ },
[MODEL_DX] = {
.shortname = "Xonar DX",
.longname = "Asus Virtuoso 100",
.chip = "AV200",
.owner = THIS_MODULE,
.init = xonar_dx_init,
- .control_filter = xonar_dx_control_filter,
- .mixer_init = xonar_dx_mixer_init,
- .cleanup = xonar_dx_cleanup,
- .suspend = xonar_dx_cleanup,
- .resume = xonar_dx_resume,
+ .control_filter = xonar_d1_control_filter,
+ .mixer_init = xonar_d1_mixer_init,
+ .cleanup = xonar_d1_cleanup,
+ .suspend = xonar_d1_cleanup,
+ .resume = xonar_d1_resume,
.set_dac_params = set_cs43xx_params,
.set_adc_params = set_cs53x1_params,
.update_dac_volume = update_cs43xx_volume,
.update_dac_mute = update_cs43xx_mute,
.gpio_changed = xonar_gpio_changed,
- .ac97_switch = xonar_dx_ac97_switch,
+ .ac97_switch = xonar_d1_ac97_switch,
.dac_tlv = cs4362a_db_scale,
.model_data_size = sizeof(struct xonar_data),
.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists