096K CPU: Physical Processor ID: 4 CPU: Processor Core ID: 0 CPU2: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. CPU 3 irqstacks, hard=c0529000 soft=c0519000 Booting processor 3/24 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 3723.88 BogoMIPS (lpj=7447771) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 6 CPU: Processor Core ID: 0 CPU3: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. CPU 4 irqstacks, hard=c052a000 soft=c051a000 Booting processor 4/2 ip 6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 3723.86 BogoMIPS (lpj=7447739) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU4: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#4]: passed. CPU 5 irqstacks, hard=c052b000 soft=c051b000 Booting processor 5/10 ip 6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 3723.90 BogoMIPS (lpj=7447817) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 2 CPU: Processor Core ID: 2 CPU5: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#5]: passed. CPU 6 irqstacks, hard=c052c000 soft=c051c000 Booting processor 6/18 ip 6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 3723.91 BogoMIPS (lpj=7447836) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 4 CPU: Processor Core ID: 2 CPU6: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#6]: passed. CPU 7 irqstacks, hard=c052d000 soft=c051d000 Booting processor 7/26 ip 6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 3723.90 BogoMIPS (lpj=7447812) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 6 CPU: Processor Core ID: 2 CPU7: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs Total of 8 processors activated (29791.10 BogoMIPS). net_namespace: 596 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 No dock devices found. ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Dell PowerEdge R900 detected, enabling pci=bfsort. ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: Dell Inc. ACPI: DMI Product Name: PowerEdge R900 ACPI: DMI Product Version: ACPI: DMI Board Name: 0C764H ACPI: DMI BIOS Vendor: Dell Inc. ACPI: DMI BIOS Date: 03/23/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:16:00.0: PME# supported from D0 D3hot D3cold pci 0000:16:00.0: PME# disabled pci 0000:16:00.3: PME# supported from D0 D3hot D3cold pci 0000:16:00.3: PME# disabled pci 0000:17:00.0: PME# supported from D0 D3hot D3cold pci 0000:17:00.0: PME# disabled pci 0000:17:01.0: PME# supported from D0 D3hot D3cold pci 0000:17:01.0: PME# disabled pci 0000:19:00.0: supports D1 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:02.0: PME# supported from D0 D3hot D3cold pci 0000:02:02.0: PME# disabled pci 0000:02:03.0: PME# supported from D0 D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:04.0: PME# supported from D0 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:05.0: PME# supported from D0 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0b:00.0: PME# supported from D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:07:00.0: PME# supported from D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:0d:02.0: PME# supported from D0 D3hot D3cold pci 0000:0d:02.0: PME# disabled pci 0000:0d:04.0: PME# supported from D0 D3hot D3cold pci 0000:0d:04.0: PME# disabled pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:11:02.0: PME# supported from D0 D3hot D3cold pci 0000:11:02.0: PME# disabled pci 0000:11:04.0: PME# supported from D0 D3hot D3cold pci 0000:11:04.0: PME# disabled pci 0000:1b:0c.0: supports D1 pci 0000:1b:0c.0: supports D2 pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN2.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN3.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN4.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN5.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 7 Switched to high resolution mode on CPU 6 system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x880-0x8bf has been reserved system 00:07: ioport range 0x8c0-0x8df has been reserved system 00:07: ioport range 0x8e0-0x8e3 has been reserved system 00:07: ioport range 0x8f0-0x8f1 has been reserved system 00:07: ioport range 0x900-0x900 has been reserved system 00:07: ioport range 0xc00-0xc7f has been reserved system 00:07: ioport range 0xca0-0xca7 has been reserved system 00:07: ioport range 0xca9-0xcab has been reserved system 00:07: ioport range 0xcad-0xcaf has been reserved system 00:08: ioport range 0xca8-0xca8 has been reserved system 00:08: ioport range 0xcac-0xcac has been reserved system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:14 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:17:00.0: PCI bridge, secondary bus 0000:19 pci 0000:17:00.0: IO window: 0xe000-0xefff pci 0000:17:00.0: MEM window: 0xde200000-0xde3fffff pci 0000:17:00.0: PREFETCH window: disabled pci 0000:17:01.0: PCI bridge, secondary bus 0000:18 pci 0000:17:01.0: IO window: disabled pci 0000:17:01.0: MEM window: disabled pci 0000:17:01.0: PREFETCH window: disabled pci 0000:16:00.0: PCI bridge, secondary bus 0000:17 pci 0000:16:00.0: IO window: 0xe000-0xefff pci 0000:16:00.0: MEM window: 0xde200000-0xde3fffff pci 0000:16:00.0: PREFETCH window: disabled pci 0000:16:00.3: PCI bridge, secondary bus 0000:1a pci 0000:16:00.3: IO window: disabled pci 0000:16:00.3: MEM window: disabled pci 0000:16:00.3: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:16 pci 0000:00:02.0: IO window: 0xe000-0xefff pci 0000:00:02.0: MEM window: 0xde100000-0xde3fffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:02:01.0: PCI bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: disabled pci 0000:02:01.0: MEM window: disabled pci 0000:02:01.0: PREFETCH window: disabled pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b pci 0000:0a:00.0: IO window: disabled pci 0000:0a:00.0: MEM window: 0xd6000000-0xd7ffffff pci 0000:0a:00.0: PREFETCH window: disabled pci 0000:02:02.0: PCI bridge, secondary bus 0000:0a pci 0000:02:02.0: IO window: disabled pci 0000:02:02.0: MEM window: 0xd6000000-0xd7ffffff pci 0000:02:02.0: PREFETCH window: disabled pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 pci 0000:08:00.0: IO window: disabled pci 0000:08:00.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:08:00.0: PREFETCH window: disabled pci 0000:02:03.0: PCI bridge, secondary bus 0000:08 pci 0000:02:03.0: IO window: disabled pci 0000:02:03.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:02:03.0: PREFETCH window: disabled pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xda000000-0xdbffffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:02:04.0: PCI bridge, secondary bus 0000:06 pci 0000:02:04.0: IO window: disabled pci 0000:02:04.0: MEM window: 0xda000000-0xdbffffff pci 0000:02:04.0: PREFETCH window: disabled pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xdc000000-0xddffffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:02:05.0: PCI bridge, secondary bus 0000:04 pci 0000:02:05.0: IO window: disabled pci 0000:02:05.0: MEM window: 0xdc000000-0xddffffff pci 0000:02:05.0: PREFETCH window: disabled pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: disabled pci 0000:01:00.0: MEM window: 0xd6000000-0xddffffff pci 0000:01:00.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xd6000000-0xddffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:0d:02.0: PCI bridge, secondary bus 0000:0f pci 0000:0d:02.0: IO window: disabled pci 0000:0d:02.0: MEM window: disabled pci 0000:0d:02.0: PREFETCH window: disabled pci 0000:0d:04.0: PCI bridge, secondary bus 0000:0e pci 0000:0d:04.0: IO window: disabled pci 0000:0d:04.0: MEM window: disabled pci 0000:0d:04.0: PREFETCH window: disabled pci 0000:0c:00.0: PCI bridge, secondary bus 0000:0d pci 0000:0c:00.0: IO window: disabled pci 0000:0c:00.0: MEM window: disabled pci 0000:0c:00.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:11:02.0: PCI bridge, secondary bus 0000:13 pci 0000:11:02.0: IO window: disabled pci 0000:11:02.0: MEM window: disabled pci 0000:11:02.0: PREFETCH window: disabled pci 0000:11:04.0: PCI bridge, secondary bus 0000:12 pci 0000:11:04.0: IO window: disabled pci 0000:11:04.0: MEM window: disabled pci 0000:11:04.0: PREFETCH window: disabled pci 0000:10:00.0: PCI bridge, secondary bus 0000:11 pci 0000:10:00.0: IO window: disabled pci 0000:10:00.0: MEM window: disabled pci 0000:10:00.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:10 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1b pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xde400000-0xde4fffff pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff pci 0000:00:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:02.0: setting latency timer to 64 pci 0000:16:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:16:00.0: setting latency timer to 64 pci 0000:17:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:17:00.0: setting latency timer to 64 pci 0000:17:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:17:01.0: setting latency timer to 64 pci 0000:16:00.3: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 pci 0000:00:03.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:02:01.0: setting latency timer to 64 pci 0000:02:02.0: setting latency timer to 64 pci 0000:0a:00.0: setting latency timer to 64 pci 0000:02:03.0: setting latency timer to 64 pci 0000:08:00.0: setting latency timer to 64 pci 0000:02:04.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:02:05.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:04.0: setting latency timer to 64 pci 0000:0c:00.0: setting latency timer to 64 pci 0000:0d:02.0: setting latency timer to 64 pci 0000:0d:04.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:00:06.0: setting latency timer to 64 pci 0000:10:00.0: setting latency timer to 64 pci 0000:11:02.0: setting latency timer to 64 pci 0000:11:04.0: setting latency timer to 64 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 1235 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) pci 0000:1b:0c.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pci_express 0000:00:06.0:pcie00: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:01:00.0: setting latency timer to 64 pcieport-driver 0000:02:01.0: setting latency timer to 64 pcieport-driver 0000:02:01.0: found MSI capability pcieport-driver 0000:02:02.0: setting latency timer to 64 pcieport-driver 0000:02:02.0: found MSI capability pcieport-driver 0000:02:03.0: setting latency timer to 64 pcieport-driver 0000:02:03.0: found MSI capability pcieport-driver 0000:02:04.0: setting latency timer to 64 pcieport-driver 0000:02:04.0: found MSI capability pcieport-driver 0000:02:05.0: setting latency timer to 64 pcieport-driver 0000:02:05.0: found MSI capability pcieport-driver 0000:0c:00.0: setting latency timer to 64 pcieport-driver 0000:0d:02.0: setting latency timer to 64 pcieport-driver 0000:0d:02.0: found MSI capability pcieport-driver 0000:0d:04.0: setting latency timer to 64 pcieport-driver 0000:0d:04.0: found MSI capability pcieport-driver 0000:10:00.0: setting latency timer to 64 pcieport-driver 0000:11:02.0: setting latency timer to 64 pcieport-driver 0000:11:02.0: found MSI capability pcieport-driver 0000:11:04.0: setting latency timer to 64 pcieport-driver 0000:11:04.0: found MSI capability pcieport-driver 0000:16:00.0: setting latency timer to 64 pcieport-driver 0000:17:00.0: setting latency timer to 64 pcieport-driver 0000:17:00.0: found MSI capability pcieport-driver 0000:17:01.0: setting latency timer to 64 pcieport-driver 0000:17:01.0: found MSI capability input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:02: registered as cooling_device2 processor ACPI0007:03: registered as cooling_device3 processor ACPI0007:04: registered as cooling_device4 processor ACPI0007:05: registered as cooling_device5 processor ACPI0007:06: registered as cooling_device6 processor ACPI0007:07: registered as cooling_device7 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.9 (July 18, 2008) bnx2 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem dc000000, IRQ 38, node addr 00:1e:c9:d9:84:57 bnx2 0000:07:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 37, node addr 00:1e:c9:d9:84:59 bnx2 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:1e:c9:d9:84:5b bnx2 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 18, node addr 00:1e:c9:d9:84:5d PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... hda: TSSTcorpDVD-ROM TS-L333A, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 25:slot 0:func 0 megaraid_sas 0000:19:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 megaraid_sas 0000:19:00.0: setting latency timer to 64 megasas: FW now in Ready state scsi0 : LSI SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:2:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:3:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:4:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:5:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:6:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:7:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:32:0: Enclosure DP BACKPLANE 1.06 PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.11 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:2:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: BAR 0: can't reserve I/O region [0x1f0-0x1f7] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) ata_piix 0000:00:1f.2: BAR 2: can't reserve I/O region [0x170-0x177] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.2: no available native port Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xde0ffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc3 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000cc80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ccc0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: New USB device found, idVendor=413c, idProduct=a001 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cce0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-7: new high speed USB device using ehci_hcd and address 4 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usb 1-7: configuration #1 chosen from 1 choice hub 1-7:1.0: USB hub found hub 1-7:1.0: 2 ports detected input: PC Speaker as /devices/platform/pcspkr/input/input1 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! coretemp coretemp.4: Using relative temperature scale! coretemp coretemp.5: Using relative temperature scale! coretemp coretemp.6: Using relative temperature scale! coretemp coretemp.7: Using relative temperature scale! hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.1.0 Aug 14 2008 usb 1-7: New USB device found, idVendor=04b4, idProduct=6560 usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=0624, idProduct=0294 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Dell 03R874 usb 3-1: Manufacturer: Avocent usb 1-2.1: new full speed USB device using ehci_hcd and address 5 usb 1-2.1: configuration #1 chosen from 1 choice usb 1-2.1: New USB device found, idVendor=413c, idProduct=0000 usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2.1: Product: DRAC5 usb 1-2.1: Manufacturer: Dell usb 1-2.1: SerialNumber: 0000000 usb 1-7.1: new high speed USB device using ehci_hcd and address 6 usb 1-7.1: configuration #1 chosen from 1 choice hub 1-7.1:1.0: USB hub found hub 1-7.1:1.0: 2 ports detected usb 1-7.1: New USB device found, idVendor=04b4, idProduct=6560 usb 1-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver hiddev input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1 input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3 input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1 input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input4 input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-2.1 input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.1/input/input5 input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-2.1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 260k freed Adding 27350652k swap on /dev/sda3. Priority:-1 extents:1 across:27350652k bnx2: eth0: using MSI bnx2: eth1: using MSI bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex