ID: 2 CPU: Processor Core ID: 3 CPU13: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#13]: passed. CPU 14 irqstacks, hard=c0534000 soft=c0524000 Booting processor 14/19 ip 6000 Initializing CPU#14 Leaving ESR disabled. Calibrating delay using timer specific routine.. 3723.88 BogoMIPS (lpj=7447761) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 4 CPU: Processor Core ID: 3 CPU14: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#14]: passed. CPU 15 irqstacks, hard=c0535000 soft=c0525000 Booting processor 15/27 ip 6000 Initializing CPU#15 Leaving ESR disabled. Calibrating delay using timer specific routine.. 3723.89 BogoMIPS (lpj=7447782) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 6 CPU: Processor Core ID: 3 CPU15: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#15]: passed. Brought up 16 CPUs Total of 16 processors activated (59582.26 BogoMIPS). net_namespace: 596 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 No dock devices found. ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Dell PowerEdge R900 detected, enabling pci=bfsort. ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: Dell Inc. ACPI: DMI Product Name: PowerEdge R900 ACPI: DMI Product Version: ACPI: DMI Board Name: 0C764H ACPI: DMI BIOS Vendor: Dell Inc. ACPI: DMI BIOS Date: 03/23/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:16:00.0: PME# supported from D0 D3hot D3cold pci 0000:16:00.0: PME# disabled pci 0000:16:00.3: PME# supported from D0 D3hot D3cold pci 0000:16:00.3: PME# disabled pci 0000:17:00.0: PME# supported from D0 D3hot D3cold pci 0000:17:00.0: PME# disabled pci 0000:17:01.0: PME# supported from D0 D3hot D3cold pci 0000:17:01.0: PME# disabled pci 0000:19:00.0: supports D1 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:02.0: PME# supported from D0 D3hot D3cold pci 0000:02:02.0: PME# disabled pci 0000:02:03.0: PME# supported from D0 D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:04.0: PME# supported from D0 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:05.0: PME# supported from D0 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0b:00.0: PME# supported from D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:07:00.0: PME# supported from D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:0d:02.0: PME# supported from D0 D3hot D3cold pci 0000:0d:02.0: PME# disabled pci 0000:0d:04.0: PME# supported from D0 D3hot D3cold pci 0000:0d:04.0: PME# disabled pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:11:02.0: PME# supported from D0 D3hot D3cold pci 0000:11:02.0: PME# disabled pci 0000:11:04.0: PME# supported from D0 D3hot D3cold pci 0000:11:04.0: PME# disabled pci 0000:1b:0c.0: supports D1 pci 0000:1b:0c.0: supports D2 pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN2.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN3.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN4.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN5.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 14 Switched to high resolution mode on CPU 7 Switched to high resolution mode on CPU 12 Switched to high resolution mode on CPU 13 Switched to high resolution mode on CPU 11 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 10 Switched to high resolution mode on CPU 9 Switched to high resolution mode on CPU 8 Switched to high resolution mode on CPU 15 Switched to high resolution mode on CPU 6 system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x880-0x8bf has been reserved system 00:07: ioport range 0x8c0-0x8df has been reserved system 00:07: ioport range 0x8e0-0x8e3 has been reserved system 00:07: ioport range 0x8f0-0x8f1 has been reserved system 00:07: ioport range 0x900-0x900 has been reserved system 00:07: ioport range 0xc00-0xc7f has been reserved system 00:07: ioport range 0xca0-0xca7 has been reserved system 00:07: ioport range 0xca9-0xcab has been reserved system 00:07: ioport range 0xcad-0xcaf has been reserved system 00:08: ioport range 0xca8-0xca8 has been reserved system 00:08: ioport range 0xcac-0xcac has been reserved system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:14 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:17:00.0: PCI bridge, secondary bus 0000:19 pci 0000:17:00.0: IO window: 0xe000-0xefff pci 0000:17:00.0: MEM window: 0xde200000-0xde3fffff pci 0000:17:00.0: PREFETCH window: disabled pci 0000:17:01.0: PCI bridge, secondary bus 0000:18 pci 0000:17:01.0: IO window: disabled pci 0000:17:01.0: MEM window: disabled pci 0000:17:01.0: PREFETCH window: disabled pci 0000:16:00.0: PCI bridge, secondary bus 0000:17 pci 0000:16:00.0: IO window: 0xe000-0xefff pci 0000:16:00.0: MEM window: 0xde200000-0xde3fffff pci 0000:16:00.0: PREFETCH window: disabled pci 0000:16:00.3: PCI bridge, secondary bus 0000:1a pci 0000:16:00.3: IO window: disabled pci 0000:16:00.3: MEM window: disabled pci 0000:16:00.3: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:16 pci 0000:00:02.0: IO window: 0xe000-0xefff pci 0000:00:02.0: MEM window: 0xde100000-0xde3fffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:02:01.0: PCI bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: disabled pci 0000:02:01.0: MEM window: disabled pci 0000:02:01.0: PREFETCH window: disabled pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b pci 0000:0a:00.0: IO window: disabled pci 0000:0a:00.0: MEM window: 0xd6000000-0xd7ffffff pci 0000:0a:00.0: PREFETCH window: disabled pci 0000:02:02.0: PCI bridge, secondary bus 0000:0a pci 0000:02:02.0: IO window: disabled pci 0000:02:02.0: MEM window: 0xd6000000-0xd7ffffff pci 0000:02:02.0: PREFETCH window: disabled pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 pci 0000:08:00.0: IO window: disabled pci 0000:08:00.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:08:00.0: PREFETCH window: disabled pci 0000:02:03.0: PCI bridge, secondary bus 0000:08 pci 0000:02:03.0: IO window: disabled pci 0000:02:03.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:02:03.0: PREFETCH window: disabled pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xda000000-0xdbffffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:02:04.0: PCI bridge, secondary bus 0000:06 pci 0000:02:04.0: IO window: disabled pci 0000:02:04.0: MEM window: 0xda000000-0xdbffffff pci 0000:02:04.0: PREFETCH window: disabled pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xdc000000-0xddffffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:02:05.0: PCI bridge, secondary bus 0000:04 pci 0000:02:05.0: IO window: disabled pci 0000:02:05.0: MEM window: 0xdc000000-0xddffffff pci 0000:02:05.0: PREFETCH window: disabled pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: disabled pci 0000:01:00.0: MEM window: 0xd6000000-0xddffffff pci 0000:01:00.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xd6000000-0xddffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:0d:02.0: PCI bridge, secondary bus 0000:0f pci 0000:0d:02.0: IO window: disabled pci 0000:0d:02.0: MEM window: disabled pci 0000:0d:02.0: PREFETCH window: disabled pci 0000:0d:04.0: PCI bridge, secondary bus 0000:0e pci 0000:0d:04.0: IO window: disabled pci 0000:0d:04.0: MEM window: disabled pci 0000:0d:04.0: PREFETCH window: disabled pci 0000:0c:00.0: PCI bridge, secondary bus 0000:0d pci 0000:0c:00.0: IO window: disabled pci 0000:0c:00.0: MEM window: disabled pci 0000:0c:00.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:11:02.0: PCI bridge, secondary bus 0000:13 pci 0000:11:02.0: IO window: disabled pci 0000:11:02.0: MEM window: disabled pci 0000:11:02.0: PREFETCH window: disabled pci 0000:11:04.0: PCI bridge, secondary bus 0000:12 pci 0000:11:04.0: IO window: disabled pci 0000:11:04.0: MEM window: disabled pci 0000:11:04.0: PREFETCH window: disabled pci 0000:10:00.0: PCI bridge, secondary bus 0000:11 pci 0000:10:00.0: IO window: disabled pci 0000:10:00.0: MEM window: disabled pci 0000:10:00.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:10 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1b pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xde400000-0xde4fffff pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff pci 0000:00:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:02.0: setting latency timer to 64 pci 0000:16:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:16:00.0: setting latency timer to 64 pci 0000:17:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:17:00.0: setting latency timer to 64 pci 0000:17:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:17:01.0: setting latency timer to 64 pci 0000:16:00.3: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 pci 0000:00:03.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:02:01.0: setting latency timer to 64 pci 0000:02:02.0: setting latency timer to 64 pci 0000:0a:00.0: setting latency timer to 64 pci 0000:02:03.0: setting latency timer to 64 pci 0000:08:00.0: setting latency timer to 64 pci 0000:02:04.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:02:05.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:04.0: setting latency timer to 64 pci 0000:0c:00.0: setting latency timer to 64 pci 0000:0d:02.0: setting latency timer to 64 pci 0000:0d:04.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:00:06.0: setting latency timer to 64 pci 0000:10:00.0: setting latency timer to 64 pci 0000:11:02.0: setting latency timer to 64 pci 0000:11:04.0: setting latency timer to 64 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 1235 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) pci 0000:1b:0c.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pci_express 0000:00:06.0:pcie00: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:01:00.0: setting latency timer to 64 pcieport-driver 0000:02:01.0: setting latency timer to 64 pcieport-driver 0000:02:01.0: found MSI capability pcieport-driver 0000:02:02.0: setting latency timer to 64 pcieport-driver 0000:02:02.0: found MSI capability pcieport-driver 0000:02:03.0: setting latency timer to 64 pcieport-driver 0000:02:03.0: found MSI capability pcieport-driver 0000:02:04.0: setting latency timer to 64 pcieport-driver 0000:02:04.0: found MSI capability pcieport-driver 0000:02:05.0: setting latency timer to 64 pcieport-driver 0000:02:05.0: found MSI capability pcieport-driver 0000:0c:00.0: setting latency timer to 64 pcieport-driver 0000:0d:02.0: setting latency timer to 64 pcieport-driver 0000:0d:02.0: found MSI capability pcieport-driver 0000:0d:04.0: setting latency timer to 64 pcieport-driver 0000:0d:04.0: found MSI capability pcieport-driver 0000:10:00.0: setting latency timer to 64 pcieport-driver 0000:11:02.0: setting latency timer to 64 pcieport-driver 0000:11:02.0: found MSI capability pcieport-driver 0000:11:04.0: setting latency timer to 64 pcieport-driver 0000:11:04.0: found MSI capability pcieport-driver 0000:16:00.0: setting latency timer to 64 pcieport-driver 0000:17:00.0: setting latency timer to 64 pcieport-driver 0000:17:00.0: found MSI capability pcieport-driver 0000:17:01.0: setting latency timer to 64 pcieport-driver 0000:17:01.0: found MSI capability input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:02: registered as cooling_device2 processor ACPI0007:03: registered as cooling_device3 processor ACPI0007:04: registered as cooling_device4 processor ACPI0007:05: registered as cooling_device5 processor ACPI0007:06: registered as cooling_device6 processor ACPI0007:07: registered as cooling_device7 processor ACPI0007:08: registered as cooling_device8 processor ACPI0007:09: registered as cooling_device9 processor ACPI0007:0a: registered as cooling_device10 processor ACPI0007:0b: registered as cooling_device11 processor ACPI0007:0c: registered as cooling_device12 processor ACPI0007:0d: registered as cooling_device13 processor ACPI0007:0e: registered as cooling_device14 processor ACPI0007:0f: registered as cooling_device15 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.9 (July 18, 2008) bnx2 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem dc000000, IRQ 38, node addr 00:1e:c9:d9:84:57 bnx2 0000:07:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 37, node addr 00:1e:c9:d9:84:59 bnx2 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:1e:c9:d9:84:5b bnx2 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 18, node addr 00:1e:c9:d9:84:5d PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... hda: TSSTcorpDVD-ROM TS-L333A, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 25:slot 0:func 0 megaraid_sas 0000:19:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 megaraid_sas 0000:19:00.0: setting latency timer to 64 megasas: FW now in Ready state scsi0 : LSI SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:2:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:3:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:4:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:5:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:6:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:7:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:32:0: Enclosure DP BACKPLANE 1.06 PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.11 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:2:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: BAR 0: can't reserve I/O region [0x1f0-0x1f7] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) ata_piix 0000:00:1f.2: BAR 2: can't reserve I/O region [0x170-0x177] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.2: no available native port Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xde0ffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc3 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000cc80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ccc0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: New USB device found, idVendor=413c, idProduct=a001 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cce0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-7: new high speed USB device using ehci_hcd and address 4 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc3 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usb 1-7: configuration #1 chosen from 1 choice hub 1-7:1.0: USB hub found hub 1-7:1.0: 2 ports detected input: PC Speaker as /devices/platform/pcspkr/input/input1 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! coretemp coretemp.4: Using relative temperature scale! coretemp coretemp.5: Using relative temperature scale! coretemp coretemp.6: Using relative temperature scale! coretemp coretemp.7: Using relative temperature scale! coretemp coretemp.8: Using relative temperature scale! coretemp coretemp.9: Using relative temperature scale! coretemp coretemp.10: Using relative temperature scale! coretemp coretemp.11: Using relative temperature scale! coretemp coretemp.12: Using relative temperature scale! coretemp coretemp.13: Using relative temperature scale! coretemp coretemp.14: Using relative temperature scale! coretemp coretemp.15: Using relative temperature scale! hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.1.0 Aug 14 2008 usb 1-7: New USB device found, idVendor=04b4, idProduct=6560 usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=0624, idProduct=0294 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Dell 03R874 usb 3-1: Manufacturer: Avocent usb 1-2.1: new full speed USB device using ehci_hcd and address 5 usb 1-2.1: configuration #1 chosen from 1 choice usb 1-2.1: New USB device found, idVendor=413c, idProduct=0000 usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2.1: Product: DRAC5 usb 1-2.1: Manufacturer: Dell usb 1-2.1: SerialNumber: 0000000 usb 1-7.1: new high speed USB device using ehci_hcd and address 6 usb 1-7.1: configuration #1 chosen from 1 choice hub 1-7.1:1.0: USB hub found hub 1-7.1:1.0: 2 ports detected usb 1-7.1: New USB device found, idVendor=04b4, idProduct=6560 usb 1-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver hiddev input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1 input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3 input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1 input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input4 input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-2.1 input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.1/input/input5 input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-2.1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 260k freed Adding 27350652k swap on /dev/sda3. Priority:-1 extents:1 across:27350652k bnx2: eth0: using MSI bnx2: eth1: using MSI bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex