Linux version 2.6.27-rc3-next-20080814 (root@ca-ostest293.us.oracle.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Aug 15 08:20:32 PDT 2008 Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54846@139.185.50.77/eth0,54846@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. last_pfn = 0x27ffff max_arch_pfn = 0x3ffffffff last_pfn = 0x7fe50 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe50000 page 4k kernel direct mapping tables up to 7fe50000 @ 8000-c000 last_map_addr: 7fe50000 end: 7fe50000 init_memory_mapping 0100000000 - 027fe00000 page 2M 027fe00000 - 027ffff000 page 4k kernel direct mapping tables up to 27ffff000 @ a000-16000 last_map_addr: 27ffff000 end: 27ffff000 RAMDISK: 7fd04000 - 7fe4f68d DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò 162E) ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE50100, 0040 ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò 162E) ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 SRAT: Node 0 PXM 0 100000000-180000000 SRAT: Node 1 PXM 1 180000000-280000000 NUMA: Allocated memnodemap from 11000 - 16080 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [0000000000017000 - 0000000000046fff] pages 30 (8 early reservations) ==> bootmem [0000000000 - 0180000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000088c750] TEXT DATA BSS ==> [0000200000 - 000088c750] #3 [007fd04000 - 007fe4f68d] RAMDISK ==> [007fd04000 - 007fe4f68d] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #6 [000000a000 - 0000011000] PGTABLE ==> [000000a000 - 0000011000] #7 [0000011000 - 0000016080] MEMNODEMAP ==> [0000011000 - 0000016080] Bootmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180003fff] bootmap [0000000180004000 - 0000000180023fff] pages 20 (8 early reservations) ==> bootmem [0180000000 - 027ffff000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0000200000 - 000088c750] TEXT DATA BSS #3 [007fd04000 - 007fe4f68d] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [0000008000 - 000000a000] PGTABLE #6 [000000a000 - 0000011000] PGTABLE #7 [0000011000 - 0000016080] MEMNODEMAP found SMP MP-table at [ffff8800000f4f80] 000f4f80 [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0027ffff Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007fe50 0: 0x00100000 -> 0x00180000 1: 0x00180000 -> 0x0027ffff On node 0 totalpages: 1048046 DMA zone: 2151 pages, LIFO batch:0 DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048575 Normal zone: 1034239 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) PERCPU: Allocating 47784 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 2 Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2058990 Policy zone: Normal Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54846@139.185.50.77/eth0,54846@139.185.50.76/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1004.627 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ c000000 size 64 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 8197540k/10485756k available (3463k kernel code, 188944k reserved, 1822k data, 392k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 2009.25 BogoMIPS (lpj=4018508) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080729 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557864 Detected 12.557 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2009.35 BogoMIPS (lpj=4018718) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 2009.45 BogoMIPS (lpj=4018915) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 2009.36 BogoMIPS (lpj=4018734) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (8037.43 BogoMIPS). khelper used greatest stack depth: 6040 bytes left net_namespace: 592 bytes NET: Registered protocol family 16 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] bus: 40 index 2 mmio: [84000000, 8fffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. XXX adding modparam:'mtrr.show' 0 (ffffffff806a47a0) XXX adding modparam:'acpi_cpufreq.acpi_pstate_strict' 1 (ffffffff806a47c8) XXX adding modparam:'printk.time' 2 (ffffffff806a47f0) XXX adding modparam:'spurious.irqfixup' 3 (ffffffff806a4818) XXX adding modparam:'spurious.noirqdebug' 4 (ffffffff806a4840) XXX adding modparam:'rcuclassic.qlowmark' 5 (ffffffff806a4868) XXX adding modparam:'rcuclassic.qhimark' 6 (ffffffff806a4890) XXX adding modparam:'rcuclassic.blimit' 7 (ffffffff806a48b8) XXX adding modparam:'nfs.enable_ino64' 8 (ffffffff806a48e0) XXX adding modparam:'lockd.nsm_use_hostnames' 9 (ffffffff806a4908) XXX adding modparam:'lockd.nlm_tcpport' 10 (ffffffff806a4930) XXX adding modparam:'lockd.nlm_udpport' 11 (ffffffff806a4958) XXX adding modparam:'lockd.nlm_timeout' 12 (ffffffff806a4980) XXX adding modparam:'lockd.nlm_grace_period' 13 (ffffffff806a49a8) XXX adding modparam:'rivafb.strictmode' 14 (ffffffff806a49d0) XXX adding modparam:'rivafb.nomtrr' 15 (ffffffff806a49f8) XXX adding modparam:'rivafb.forceCRTC' 16 (ffffffff806a4a20) XXX adding modparam:'rivafb.flatpanel' 17 (ffffffff806a4a48) XXX adding modparam:'rivafb.noaccel' 18 (ffffffff806a4a70) XXX adding modparam:'nvidiafb.nomtrr' 19 (ffffffff806a4a98) XXX adding modparam:'nvidiafb.reverse_i2c' 20 (ffffffff806a4ac0) XXX adding modparam:'nvidiafb.bpp' 21 (ffffffff806a4ae8) XXX adding modparam:'nvidiafb.mode_option' 22 (ffffffff806a4b10) XXX adding modparam:'nvidiafb.vram' 23 (ffffffff806a4b38) XXX adding modparam:'nvidiafb.forceCRTC' 24 (ffffffff806a4b60) XXX adding modparam:'nvidiafb.paneltweak' 25 (ffffffff806a4b88) XXX adding modparam:'nvidiafb.noscale' 26 (ffffffff806a4bb0) XXX adding modparam:'nvidiafb.noaccel' 27 (ffffffff806a4bd8) XXX adding modparam:'nvidiafb.hwcur' 28 (ffffffff806a4c00) XXX adding modparam:'nvidiafb.fpdither' 29 (ffffffff806a4c28) XXX adding modparam:'nvidiafb.flatpanel' 30 (ffffffff806a4c50) XXX adding modparam:'vt8623fb.mtrr' 31 (ffffffff806a4c78) XXX adding modparam:'vt8623fb.mode' 32 (ffffffff806a4ca0) XXX adding modparam:'vt8623fb.mode_option' 33 (ffffffff806a4cc8) XXX adding modparam:'acpi.power_nocheck' 34 (ffffffff806a4cf0) XXX adding modparam:'processor.latency_factor' 35 (ffffffff806a4d18) XXX adding modparam:'processor.nocst' 36 (ffffffff806a4d40) XXX adding modparam:'processor.max_cstate' 37 (ffffffff806a4d68) XXX adding modparam:'processor.ignore_ppc' 38 (ffffffff806a4d90) XXX adding modparam:'thermal.psv' 39 (ffffffff806a4db8) XXX adding modparam:'thermal.off' 40 (ffffffff806a4de0) XXX adding modparam:'thermal.nocrt' 41 (ffffffff806a4e08) XXX adding modparam:'thermal.tzp' 42 (ffffffff806a4e30) XXX adding modparam:'thermal.crt' 43 (ffffffff806a4e58) XXX adding modparam:'thermal.act' 44 (ffffffff806a4e80) XXX adding modparam:'acpi.acpica_version' 45 (ffffffff806a4ea8) XXX adding modparam:'keyboard.brl_nbchords' 46 (ffffffff806a4ed0) ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x35/0x3d() sysfs: duplicate filename 'acpi' can not be created Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.27-rc3-next-20080814 #1 Call Trace: [] warn_slowpath+0xae/0xdd [] ? number+0x115/0x21f [] ? number+0x115/0x21f [] ? string+0x3d/0xa2 [] ? idr_get_empty_slot+0x161/0x24e [] ? vsnprintf+0x389/0x678 [] ? sysfs_ilookup_test+0x0/0x14 [] ? ifind+0x3d/0xac [] ? sysfs_find_dirent+0x1c/0x31 [] ? __sysfs_add_one+0x1f/0x7c [] sysfs_add_one+0x35/0x3d [] create_dir+0x58/0x93 [] sysfs_create_dir+0x38/0x4f [] kobject_add_internal+0xce/0x18f [] kobject_add_varg+0x41/0x4d [] kobject_init_and_add+0x6e/0x7c [] ? printk+0x67/0x69 [] kernel_param_sysfs_setup+0x6b/0xc6 [] param_sysfs_init+0x17f/0x202 [] ? sysfs_add_file+0xc/0xe [] ? param_sysfs_init+0x0/0x202 [] _stext+0x47/0x13f [] ? register_irq_proc+0xb7/0xd3 [] kernel_init+0x11b/0x171 [] ? schedule_tail+0x28/0x60 [] child_rip+0xa/0x11 [] ? kernel_init+0x0/0x171 [] ? child_rip+0x0/0x11 ---[ end trace 4eaa2a86a8e2da22 ]--- kobject_add_internal failed for acpi with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.27-rc3-next-20080814 #1 Call Trace: [] ? kobject_put+0x47/0x4b [] kobject_add_internal+0x14c/0x18f [] kobject_add_varg+0x41/0x4d [] kobject_init_and_add+0x6e/0x7c [] ? printk+0x67/0x69 [] kernel_param_sysfs_setup+0x6b/0xc6 [] param_sysfs_init+0x17f/0x202 [] ? sysfs_add_file+0xc/0xe [] ? param_sysfs_init+0x0/0x202 [] _stext+0x47/0x13f [] ? register_irq_proc+0xb7/0xd3 [] kernel_init+0x11b/0x171 [] ? schedule_tail+0x28/0x60 [] child_rip+0xa/0x11 [] ? kernel_init+0x0/0x171 [] ? child_rip+0x0/0x11 Module 'acpi' failed to be added to sysfs, error number -17 The system will be unstable now. XXX adding modparam:'keyboard.brl_timeout' 47 (ffffffff806a4ef8) XXX adding modparam:'vt.underline' 48 (ffffffff806a4f20) XXX adding modparam:'vt.italic' 49 (ffffffff806a4f48) XXX adding modparam:'vt.default_blu' 50 (ffffffff806a4f70) XXX adding modparam:'vt.default_grn' 51 (ffffffff806a4f98) XXX adding modparam:'vt.default_red' 52 (ffffffff806a4fc0) XXX adding modparam:'vt.default_utf8' 53 (ffffffff806a4fe8) XXX adding modparam:'intel_rng.no_fwh_detect' 54 (ffffffff806a5010) XXX adding modparam:'amd64_agp.agp_try_unsupported' 55 (ffffffff806a5038) XXX adding modparam:'ipmi_devintf.ipmi_major' 56 (ffffffff806a5060) XXX adding modparam:'ipmi_si.unload_when_empty' 57 (ffffffff806a5088) XXX adding modparam:'ipmi_si.force_kipmid' 58 (ffffffff806a50b0) XXX adding modparam:'ipmi_si.slave_addrs' 59 (ffffffff806a50d8) XXX adding modparam:'ipmi_si.regshifts' 60 (ffffffff806a5100) XXX adding modparam:'ipmi_si.regsizes' 61 (ffffffff806a5128) XXX adding modparam:'ipmi_si.regspacings' 62 (ffffffff806a5150) XXX adding modparam:'ipmi_si.irqs' 63 (ffffffff806a5178) XXX adding modparam:'ipmi_si.ports' 64 (ffffffff806a51a0) XXX adding modparam:'ipmi_si.addrs' 65 (ffffffff806a51c8) XXX adding modparam:'ipmi_si.type' 66 (ffffffff806a51f0) XXX adding modparam:'ipmi_si.trydefaults' 67 (ffffffff806a5218) XXX adding modparam:'ipmi_si.hotmod' 68 (ffffffff806a5240) XXX adding modparam:'ipmi_si.kcs_debug' 69 (ffffffff806a5268) XXX adding modparam:'ipmi_si.smic_debug' 70 (ffffffff806a5290) XXX adding modparam:'ipmi_si.bt_debug' 71 (ffffffff806a52b8) XXX adding modparam:'ipmi_watchdog.nowayout' 72 (ffffffff806a52e0) XXX adding modparam:'ipmi_watchdog.start_now' 73 (ffffffff806a5308) XXX adding modparam:'ipmi_watchdog.preop' 74 (ffffffff806a5330) XXX adding modparam:'ipmi_watchdog.preaction' 75 (ffffffff806a5358) XXX adding modparam:'ipmi_watchdog.action' 76 (ffffffff806a5380) XXX adding modparam:'ipmi_watchdog.pretimeout' 77 (ffffffff806a53a8) XXX adding modparam:'ipmi_watchdog.timeout' 78 (ffffffff806a53d0) XXX adding modparam:'ipmi_watchdog.ifnum_to_use' 79 (ffffffff806a53f8) XXX adding modparam:'ipmi_poweroff.poweroff_powercycle' 80 (ffffffff806a5420) XXX adding modparam:'ipmi_poweroff.ifnum_to_use' 81 (ffffffff806a5448) XXX adding modparam:'hangcheck_timer.hangcheck_dump_tasks' 82 (ffffffff806a5470) XXX adding modparam:'hangcheck_timer.hangcheck_reboot' 83 (ffffffff806a5498) XXX adding modparam:'hangcheck_timer.hangcheck_margin' 84 (ffffffff806a54c0) XXX adding modparam:'hangcheck_timer.hangcheck_tick' 85 (ffffffff806a54e8) XXX adding modparam:'drm.debug' 86 (ffffffff806a5510) XXX adding modparam:'radeon.no_wb' 87 (ffffffff806a5538) XXX adding modparam:'cn.cn_val' 88 (ffffffff806a5560) XXX adding modparam:'cn.cn_idx' 89 (ffffffff806a5588) XXX adding modparam:'8250.nr_uarts' 90 (ffffffff806a55b0) XXX adding modparam:'8250.share_irqs' 91 (ffffffff806a55d8) XXX adding modparam:'brd.max_part' 92 (ffffffff806a5600) XXX adding modparam:'brd.rd_size' 93 (ffffffff806a5628) XXX adding modparam:'brd.rd_nr' 94 (ffffffff806a5650) XXX adding modparam:'bnx2.disable_msi' 95 (ffffffff806a5678) XXX adding modparam:'b44.b44_debug' 96 (ffffffff806a56a0) XXX adding modparam:'netconsole.netconsole' 97 (ffffffff806a56c8) XXX adding modparam:'scsi_mod.scsi_logging_level' 98 (ffffffff806a56f0) XXX adding modparam:'scsi_mod.inq_timeout' 99 (ffffffff806a5718) XXX adding modparam:'scsi_mod.max_report_luns' 100 (ffffffff806a5740) XXX adding modparam:'scsi_mod.scan' 101 (ffffffff806a5768) XXX adding modparam:'scsi_mod.max_luns' 102 (ffffffff806a5790) XXX adding modparam:'scsi_mod.default_dev_flags' 103 (ffffffff806a57b8) XXX adding modparam:'scsi_mod.dev_flags' 104 (ffffffff806a57e0) XXX adding modparam:'scsi_transport_fc.dev_loss_tmo' 105 (ffffffff806a5808) XXX adding modparam:'sg.allow_dio' 106 (ffffffff806a5830) XXX adding modparam:'sg.def_reserved_size' 107 (ffffffff806a5858) XXX adding modparam:'sg.scatter_elem_sz' 108 (ffffffff806a5880) XXX adding modparam:'usbcore.debug' 110 (ffffffff806a58d0) XXX adding modparam:'usbcore.use_both_schemes' 111 (ffffffff806a58f8) XXX adding modparam:'usbcore.old_scheme_first' 112 (ffffffff806a5920) XXX adding modparam:'usbcore.blinkenlights' 113 (ffffffff806a5948) XXX adding modparam:'usbcore.usbfs_snoop' 114 (ffffffff806a5970) XXX adding modparam:'i8042.debug' 115 (ffffffff806a5998) XXX adding modparam:'i8042.nopnp' 116 (ffffffff806a59c0) XXX adding modparam:'i8042.dritek' 117 (ffffffff806a59e8) XXX adding modparam:'i8042.panicblink' 118 (ffffffff806a5a10) XXX adding modparam:'i8042.noloop' 119 (ffffffff806a5a38) XXX adding modparam:'i8042.dumbkbd' 120 (ffffffff806a5a60) XXX adding modparam:'i8042.direct' 121 (ffffffff806a5a88) XXX adding modparam:'i8042.reset' 122 (ffffffff806a5ab0) XXX adding modparam:'i8042.unlock' 123 (ffffffff806a5ad8) XXX adding modparam:'i8042.nomux' 124 (ffffffff806a5b00) XXX adding modparam:'i8042.noaux' 125 (ffffffff806a5b28) XXX adding modparam:'i8042.nokbd' 126 (ffffffff806a5b50) XXX adding modparam:'mousedev.tap_time' 127 (ffffffff806a5b78) XXX adding modparam:'mousedev.yres' 128 (ffffffff806a5ba0) XXX adding modparam:'mousedev.xres' 129 (ffffffff806a5bc8) XXX adding modparam:'atkbd.extra' 130 (ffffffff806a5bf0) XXX adding modparam:'atkbd.scroll' 131 (ffffffff806a5c18) XXX adding modparam:'atkbd.softraw' 132 (ffffffff806a5c40) XXX adding modparam:'atkbd.softrepeat' 133 (ffffffff806a5c68) XXX adding modparam:'atkbd.reset' 134 (ffffffff806a5c90) XXX adding modparam:'atkbd.set' 135 (ffffffff806a5cb8) XXX adding modparam:'psmouse.resync_time' 136 (ffffffff806a5ce0) XXX adding modparam:'psmouse.resetafter' 137 (ffffffff806a5d08) XXX adding modparam:'psmouse.smartscroll' 138 (ffffffff806a5d30) XXX adding modparam:'psmouse.rate' 139 (ffffffff806a5d58) XXX adding modparam:'psmouse.resolution' 140 (ffffffff806a5d80) XXX adding modparam:'psmouse.proto' 141 (ffffffff806a5da8) XXX adding modparam:'i2c_piix4.force_addr' 142 (ffffffff806a5dd0) XXX adding modparam:'i2c_piix4.force' 143 (ffffffff806a5df8) XXX adding modparam:'i2c_viapro.force_addr' 144 (ffffffff806a5e20) XXX adding modparam:'i2c_viapro.force' 145 (ffffffff806a5e48) XXX adding modparam:'i2c_algo_bit.bit_test' 146 (ffffffff806a5e70) XXX adding modparam:'via686a.force_addr' 147 (ffffffff806a5e98) XXX adding modparam:'vt1211.force_id' 148 (ffffffff806a5ec0) XXX adding modparam:'vt1211.int_mode' 149 (ffffffff806a5ee8) XXX adding modparam:'vt1211.uch_config' 150 (ffffffff806a5f10) XXX adding modparam:'vt8231.force_addr' 151 (ffffffff806a5f38) XXX adding modparam:'softdog.soft_noboot' 152 (ffffffff806a5f60) XXX adding modparam:'softdog.nowayout' 153 (ffffffff806a5f88) XXX adding modparam:'softdog.soft_margin' 154 (ffffffff806a5fb0) XXX adding modparam:'edac_core.edac_mc_poll_msec' 155 (ffffffff806a5fd8) XXX adding modparam:'edac_core.edac_mc_log_ce' 156 (ffffffff806a6000) XXX adding modparam:'edac_core.edac_mc_log_ue' 157 (ffffffff806a6028) XXX adding modparam:'edac_core.edac_mc_panic_on_ue' 158 (ffffffff806a6050) XXX adding modparam:'edac_core.edac_pci_panic_on_pe' 159 (ffffffff806a6078) XXX adding modparam:'edac_core.check_pci_errors' 160 (ffffffff806a60a0) XXX adding modparam:'i5000_edac.edac_op_state' 161 (ffffffff806a60c8) XXX adding modparam:'e752x_edac.report_non_memory_errors' 162 (ffffffff806a60f0) XXX adding modparam:'e752x_edac.sysbus_parity' 163 (ffffffff806a6118) XXX adding modparam:'e752x_edac.edac_op_state' 164 (ffffffff806a6140) XXX adding modparam:'e752x_edac.force_function_unhide' 165 (ffffffff806a6168) XXX adding modparam:'i82975x_edac.edac_op_state' 166 (ffffffff806a6190) XXX adding modparam:'cpufreq.debug_ratelimit' 167 (ffffffff806a61b8) XXX adding modparam:'cpufreq.debug' 168 (ffffffff806a61e0) XXX adding modparam:'hid.debug' 169 (ffffffff806a6208) XXX adding modparam:'hid.pb_fnmode' 170 (ffffffff806a6230) XXX adding modparam:'usbhid.rdesc_quirks' 171 (ffffffff806a6258) XXX adding modparam:'usbhid.quirks' 172 (ffffffff806a6280) XXX adding modparam:'usbhid.mousepoll' 173 (ffffffff806a62a8) XXX adding modparam:'tcp_bic.smooth_part' 174 (ffffffff806a62d0) XXX adding modparam:'tcp_bic.initial_ssthresh' 175 (ffffffff806a62f8) XXX adding modparam:'tcp_bic.beta' 176 (ffffffff806a6320) XXX adding modparam:'tcp_bic.low_window' 177 (ffffffff806a6348) XXX adding modparam:'tcp_bic.max_increment' 178 (ffffffff806a6370) XXX adding modparam:'tcp_bic.fast_convergence' 179 (ffffffff806a6398) XXX adding modparam:'sunrpc.pool_mode' 180 (ffffffff806a63c0) ACPI: EC: Look up EC in DSDT ACPI: SSDT 7FE58000, 04F0 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: MCFG area at 80000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at 80000000 - 8fffffff ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:01:03.0: supports D1 pci 0000:01:03.0: supports D2 pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:09.0: transparent bridge pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:07:04.0: PME# supported from D3hot D3cold pci 0000:07:04.0: PME# disabled pci 0000:07:04.1: PME# supported from D3hot D3cold pci 0000:07:04.1: PME# disabled ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0c.0: PME# disabled pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0d.0: PME# disabled pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0e.0: PME# disabled pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:42:08.0: supports D1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] ACPI: PCI Interrupt Link [LNKW] (IRQs *16) ACPI: PCI Interrupt Link [LNKX] (IRQs *17) ACPI: PCI Interrupt Link [LNKY] (IRQs *18) ACPI: PCI Interrupt Link [LNKZ] (IRQs *19) ACPI: PCI Interrupt Link [LNU0] (IRQs *22) ACPI: PCI Interrupt Link [LNU2] (IRQs *23) ACPI: PCI Interrupt Link [LNKA] (IRQs *54) ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 pci 0000:00:09.0: IO window: 0x1000-0x2fff pci 0000:00:09.0: MEM window: 0xf7e00000-0xf7ffffff pci 0000:00:09.0: PREFETCH window: 0x000000e8000000-0x000000efffffff pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: disabled pci 0000:02:00.0: MEM window: 0xf8000000-0xf9ffffff pci 0000:02:00.0: PREFETCH window: 0x00000090000000-0x000000900fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:0b.0: PREFETCH window: 0x00000090000000-0x000000900fffff pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xfa000000-0xfbffffff pci 0000:04:00.0: PREFETCH window: 0x00000090100000-0x000000901fffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xfa000000-0xfbffffff pci 0000:00:0c.0: PREFETCH window: 0x00000090100000-0x000000901fffff pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:06:00.0: PREFETCH window: 0x00000090200000-0x000000902fffff pci 0000:00:0d.0: PCI bridge, secondary bus 0000:06 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:0d.0: PREFETCH window: 0x00000090200000-0x000000902fffff pci 0000:00:0e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:0e.0: IO window: 0x3000-0x3fff pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:0e.0: PREFETCH window: 0x00000090300000-0x000000903fffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:42:04.0: PCI bridge, secondary bus 0000:43 pci 0000:42:04.0: IO window: disabled pci 0000:42:04.0: MEM window: disabled pci 0000:42:04.0: PREFETCH window: disabled pci 0000:41:00.0: PCI bridge, secondary bus 0000:42 pci 0000:41:00.0: IO window: 0x4000-0x4fff pci 0000:41:00.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:41:00.0: PREFETCH window: 0x00000084000000-0x000000840fffff pci 0000:40:0c.0: PCI bridge, secondary bus 0000:41 pci 0000:40:0c.0: IO window: 0x4000-0x4fff pci 0000:40:0c.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:40:0c.0: PREFETCH window: 0x00000084000000-0x000000840fffff pci 0000:40:0d.0: PCI bridge, secondary bus 0000:44 pci 0000:40:0d.0: IO window: disabled pci 0000:40:0d.0: MEM window: disabled pci 0000:40:0d.0: PREFETCH window: disabled pci 0000:40:0e.0: PCI bridge, secondary bus 0000:47 pci 0000:40:0e.0: IO window: disabled pci 0000:40:0e.0: MEM window: disabled pci 0000:40:0e.0: PREFETCH window: disabled pci 0000:40:0c.0: setting latency timer to 64 pci 0000:41:00.0: setting latency timer to 64 pci 0000:40:0d.0: setting latency timer to 64 pci 0000:40:0e.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 1325k freed IA-32 Microcode Update Driver: v1.14a microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor microcode: CPU2 not a capable Intel processor microcode: CPU3 not a capable Intel processor audit: initializing netlink socket (disabled) type=2000 audit(1218788487.795:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 16013 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:00.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Enabling HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Enabling HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pci_express 0000:00:0b.0:pcie01: allocate port service pci_express 0000:00:0b.0:pcie03: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_express 0000:00:0c.0:pcie01: allocate port service pci_express 0000:00:0c.0:pcie03: allocate port service pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: found MSI capability pci_express 0000:00:0d.0:pcie00: allocate port service pci_express 0000:00:0d.0:pcie01: allocate port service pci_express 0000:00:0d.0:pcie03: allocate port service pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: found MSI capability pci_express 0000:00:0e.0:pcie00: allocate port service pci_express 0000:00:0e.0:pcie01: allocate port service pci_express 0000:00:0e.0:pcie03: allocate port service pcieport-driver 0000:40:0c.0: setting latency timer to 64 pcieport-driver 0000:40:0c.0: found MSI capability pci_express 0000:40:0c.0:pcie00: allocate port service pci_express 0000:40:0c.0:pcie01: allocate port service pci_express 0000:40:0c.0:pcie03: allocate port service pcieport-driver 0000:40:0d.0: setting latency timer to 64 pcieport-driver 0000:40:0d.0: found MSI capability pci_express 0000:40:0d.0:pcie00: allocate port service pci_express 0000:40:0d.0:pcie01: allocate port service pci_express 0000:40:0d.0:pcie03: allocate port service pcieport-driver 0000:40:0e.0: setting latency timer to 64 pcieport-driver 0000:40:0e.0: found MSI capability pci_express 0000:40:0e.0:pcie00: allocate port service pci_express 0000:40:0e.0:pcie01: allocate port service pci_express 0000:40:0e.0:pcie03: allocate port service input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:02: registered as cooling_device2 processor ACPI0007:03: registered as cooling_device3 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 Clocksource tsc unstable (delta = 4358919421601 ns) Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized IPMI Watchdog: driver initialized Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 pci 0000:01:03.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found brd: module loaded Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.9 (July 18, 2008) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: local port 54846 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 54846 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2: eth0: using MSI netconsole: carrier detect appears untrustworthy, waiting 4 seconds bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex console [netcon0] enabled netconsole: network logging started Loading iSCSI transport class v2.0-870. Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input1 i2c /dev entries driver SoftDog: cannot register miscdev on minor=130 (err=-16) EDAC MC: Ver: 2.1.0 Aug 15 2008 cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. Freeing unused kernel memory: 392k freed Write protecting the kernel read-only data: 4728k USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected insmod used greatest stack depth: 4928 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected usb 1-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 insmod used greatest stack depth: 4880 bytes left HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54 cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 503 using DAC usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 p3 p4 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d1: p1 p2 insmod used greatest stack depth: 4136 bytes left EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. modprobe used greatest stack depth: 3576 bytes left Emulex LightPulse Fibre Channel SCSI driver 8.2.7 Copyright(c) 2004-2008 Emulex. All rights reserved. lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 lpfc 0000:08:00.0: setting latency timer to 64 scsi0 : on PCI bus 08 device 00 irq 18 lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:0:0: Attached scsi generic sg0 type 12 scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:1:0: Attached scsi generic sg1 type 12 scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors (1120054 MB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors (1120054 MB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:1:8: [sda] Attached SCSI disk sd 0:0:1:8: Attached scsi generic sg2 type 0 tg3.c:v3.93 (May 22, 2008) ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: setting latency timer to 64 scsi1 : on PCI bus 08 device 01 irq 19 firmware: requesting tigon/tg3_tso.bin eth2: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:2f eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[76148000] dma_mask[40-bit] tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 firmware: requesting tigon/tg3_tso.bin eth3: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:30 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[76148000] dma_mask[40-bit] lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:0:0: Attached scsi generic sg3 type 12 scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:1:0: Attached scsi generic sg4 type 12 scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 1:0:1:8: [sdb] 2187605616 512-byte hardware sectors (1120054 MB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:8: [sdb] 2187605616 512-byte hardware sectors (1120054 MB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:1:8: [sdb] Attached SCSI disk sd 1:0:1:8: Attached scsi generic sg5 type 0 lp: driver loaded but no devices found EXT3 FS on cciss/c0d0p3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k rc.sysinit used greatest stack depth: 3560 bytes left warning: process `kudzu' used the deprecated sysctl system call with 1.23. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) rport-0:0-17: blocked FC remote port time out: removing rport rport-1:0-18: blocked FC remote port time out: removing rport