| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <e6cd9e5cff1f01ade8b6b446424e7ecb5935a65e.1219001352.git.gorcunov@gmail.com>
Date: Sun, 17 Aug 2008 23:41:46 +0400
From: Cyrill Gorcunov <gorcunov@...il.com>
To: hpa@...or.com, mingo@...e.hu, tglx@...utronix.de,
macro@...ux-mips.org
Cc: linux-kernel@...r.kernel.org, Cyrill Gorcunov <gorcunov@...il.com>
Subject: [PATCH 8/9] x86: apic - unify disconnect_bsp_APIC
- just #ifdef added
Signed-off-by: Cyrill Gorcunov <gorcunov@...il.com>
---
arch/x86/kernel/apic_32.c | 66 +++++++++++++++++++++++---------------------
arch/x86/kernel/apic_64.c | 23 ++++++++++++++-
2 files changed, 55 insertions(+), 34 deletions(-)
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 65419c7..3095bb7 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -1420,6 +1420,7 @@ void __init connect_bsp_APIC(void)
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
+#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Put the board back into PIC mode (has an effect only on
@@ -1431,47 +1432,48 @@ void disconnect_bsp_APIC(int virt_wire_setup)
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
- } else {
- /* Go back to Virtual Wire compatibility mode */
- unsigned long value;
+ return;
+ }
+#endif
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write(APIC_SPIV, value);
+ /* Go back to Virtual Wire compatibility mode */
+ unsigned int value;
- if (!virt_wire_setup) {
- /*
- * For LVT0 make it edge triggered, active high,
- * external and enabled
- */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write(APIC_LVT0, value);
- } else {
- /* Disable LVT0 */
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- }
+ /* For the spurious interrupt use vector F, and enable it */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+ value |= 0xf;
+ apic_write(APIC_SPIV, value);
+ if (!virt_wire_setup) {
/*
- * For LVT1 make it edge triggered, active high, nmi and
- * enabled
+ * For LVT0 make it edge triggered, active high,
+ * external and enabled
*/
- value = apic_read(APIC_LVT1);
- value &= ~(
- APIC_MODE_MASK | APIC_SEND_PENDING |
+ value = apic_read(APIC_LVT0);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write(APIC_LVT1, value);
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+ apic_write(APIC_LVT0, value);
+ } else {
+ /* Disable LVT0 */
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
+
+ /*
+ * For LVT1 make it edge triggered, active high,
+ * nmi and enabled
+ */
+ value = apic_read(APIC_LVT1);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+ apic_write(APIC_LVT1, value);
}
void __cpuinit generic_processor_info(int apicid, int version)
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index a814612..30b1097 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -1348,8 +1348,24 @@ void __init connect_bsp_APIC(void)
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
+#ifdef CONFIG_X86_32
+ if (pic_mode) {
+ /*
+ * Put the board back into PIC mode (has an effect only on
+ * certain older boards). Note that APIC interrupts, including
+ * IPIs, won't work beyond this point! The only exception are
+ * INIT IPIs.
+ */
+ apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+ "entering PIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x00, 0x23);
+ return;
+ }
+#endif
+
/* Go back to Virtual Wire compatibility mode */
- unsigned long value;
+ unsigned int value;
/* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
@@ -1375,7 +1391,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
- /* For LVT1 make it edge triggered, active high, nmi and enabled */
+ /*
+ * For LVT1 make it edge triggered, active high,
+ * nmi and enabled
+ */
value = apic_read(APIC_LVT1);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
--
1.6.0.rc1.34.g0fe8c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists