[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200808201144.02919.jbe@pengutronix.de>
Date: Wed, 20 Aug 2008 11:44:02 +0200
From: Juergen Beisert <jbe@...gutronix.de>
To: Ingo Molnar <mingo@...e.hu>
Cc: Samuel Sieb <samuel@...b.net>, linux-kernel@...r.kernel.org,
"Rafael C. de Almeida" <almeidaraf@...il.com>,
Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Magnus Damm <magnus@...inux.co.jp>,
takada <takada@....nifty.com>
Subject: Re: kernel won't boot on a Cyrix MediaGXm (Geode )
On Mittwoch, 20. August 2008, Ingo Molnar wrote:
> * Samuel Sieb <samuel@...b.net> wrote:
> > Ingo Molnar wrote:
> >> any patch we should pick up to make your box boot?
> >
> > I've looked through various datasheets and found that the GXm and GXLV
> > Geode processors don't have an incrementor. I attached two patches. One
> > only calls the incrementor setup for GX1 or better. The other one
> > removes the incrementor setup entirely. As the incrementor value
> > differs according to clock speed and we would hope that the BIOS
> > configures it correctly, it is probably the better one to choose. But I
> > will leave that choice up to you. Either one works for me. :-)
>
> i went for the commit below and queued it up in tip/x86/urgent - thanks
> Samuel.
>
> what happens if the incrementor is not set up correctly by the BIOS
The system can freeze. The clock the incrementor modifies is used for the
external SDRAM (something like a delay line or jitter reduction). Thats why
its setting depends on the core clock speed.
Juergen
--
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Vertretung Sued/Muenchen, Germany
Phone: +49-8766-939 228 | Fax: +49-5121-206917-9
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists