| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1219238170-5508-11-git-send-email-giometti@linux.it>
Date: Wed, 20 Aug 2008 15:16:10 +0200
From: Rodolfo Giometti <giometti@...ux.it>
To: linux-kernel@...r.kernel.org
Cc: Andrew Morton <akpm@...ux-foundation.org>,
David Woodhouse <dwmw2@...radead.org>,
Dave Jones <davej@...hat.com>, Sam Ravnborg <sam@...nborg.org>,
Greg KH <greg@...ah.com>,
Randy Dunlap <randy.dunlap@...cle.com>,
Kay Sievers <kay.sievers@...y.org>,
Alan Cox <alan@...rguk.ukuu.org.uk>,
"H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...e.hu>,
Rodolfo Giometti <giometti@...ux.it>
Subject: [PATCH 10/10] PPS: low level IRQ timestamps recording.
Add low level IRQ timestamps recording for x86 (32 and 64 bits)
platforms and enable UART clients in order to use it.
This improves PPS precision. :)
Signed-off-by: Rodolfo Giometti <giometti@...ux.it>
---
arch/x86/kernel/irq_32.c | 17 +++++++++++++++++
arch/x86/kernel/irq_64.c | 21 +++++++++++++++++++--
drivers/pps/Kconfig | 12 ++++++++++++
include/linux/pps.h | 1 +
include/linux/serial_core.h | 7 ++++++-
5 files changed, 55 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 1cf8c1f..85c3182 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -15,6 +15,7 @@
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/delay.h>
+#include <linux/pps.h>
#include <asm/apic.h>
#include <asm/uaccess.h>
@@ -25,6 +26,11 @@ EXPORT_PER_CPU_SYMBOL(irq_stat);
DEFINE_PER_CPU(struct pt_regs *, irq_regs);
EXPORT_PER_CPU_SYMBOL(irq_regs);
+#ifdef CONFIG_PPS_IRQ_EVENTS
+struct timespec pps_irq_ts[NR_IRQS];
+EXPORT_SYMBOL(pps_irq_ts);
+#endif
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
@@ -225,6 +231,12 @@ unsigned int do_IRQ(struct pt_regs *regs)
/* high bit used in ret_from_ code */
int overflow, irq = ~regs->orig_ax;
struct irq_desc *desc = irq_desc + irq;
+#ifdef CONFIG_PPS_IRQ_EVENTS
+ struct timespec ts;
+
+ /* Get IRQ timestamps as soon as possible for the PPS layer */
+ getnstimeofday(&ts);
+#endif
if (unlikely((unsigned)irq >= NR_IRQS)) {
printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
@@ -232,6 +244,11 @@ unsigned int do_IRQ(struct pt_regs *regs)
BUG();
}
+#ifdef CONFIG_PPS_IRQ_EVENTS
+ /* Then, after sanity check, store the IRQ timestamp */
+ pps_irq_ts[irq] = ts;
+#endif
+
old_regs = set_irq_regs(regs);
irq_enter();
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 1f78b23..e9184ce 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -17,9 +17,15 @@
#include <asm/io_apic.h>
#include <asm/idle.h>
#include <asm/smp.h>
+#include <linux/pps.h>
atomic_t irq_err_count;
+#ifdef CONFIG_PPS_IRQ_EVENTS
+struct timespec pps_irq_ts[NR_IRQS];
+EXPORT_SYMBOL(pps_irq_ts);
+#endif
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
@@ -188,6 +194,12 @@ u64 arch_irq_stat(void)
asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
+#ifdef CONFIG_PPS_IRQ_EVENTS
+ struct timespec ts;
+
+ /* Get IRQ timestamps as soon as possible for the PPS layer */
+ getnstimeofday(&ts);
+#endif
/* high bit used in ret_from_ code */
unsigned vector = ~regs->orig_ax;
@@ -201,9 +213,14 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
stack_overflow_check(regs);
#endif
- if (likely(irq < NR_IRQS))
+ if (likely(irq < NR_IRQS)) {
+#ifdef CONFIG_PPS_IRQ_EVENTS
+ /* Then, after sanity check, store the IRQ timestamp */
+ pps_irq_ts[irq] = ts;
+#endif
+
generic_handle_irq(irq);
- else {
+ } else {
if (!disable_apic)
ack_APIC_irq();
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
index 1afe4e0..7c0b094 100644
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
@@ -22,6 +22,18 @@ config PPS
To compile this driver as a module, choose M here: the module
will be called pps_core.ko.
+config PPS_IRQ_EVENTS
+ bool "Use low level IRQ timestamps"
+ depends on PPS && (X86_32 || X86_64)
+ default yes
+ help
+ Say Y here if you wish using low level IRQ timestamps to register
+ PPS events.
+
+ This should improve PPS resolution but it delays echo functions
+ call. Note also that this function is not implemented on all
+ platforms and PPS clients!
+
config PPS_DEBUG
bool "PPS debugging messages"
depends on PPS
diff --git a/include/linux/pps.h b/include/linux/pps.h
index 6695f7c..9a74d06 100644
--- a/include/linux/pps.h
+++ b/include/linux/pps.h
@@ -181,6 +181,7 @@ struct pps_device {
extern spinlock_t pps_idr_lock;
extern struct idr pps_idr;
+extern struct timespec pps_irq_ts[];
extern struct device_attribute pps_attrs[];
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 1aa894c..f4cfc66 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -165,6 +165,7 @@
#include <linux/tty.h>
#include <linux/mutex.h>
#include <linux/sysrq.h>
+#include <linux/pps.h>
struct uart_port;
struct uart_info;
@@ -492,7 +493,11 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
struct timespec ts;
if (ld->ops->dcd_change)
+#ifdef CONFIG_PPS_IRQ_EVENTS
+ ts = pps_irq_ts[port->irq];
+#else
getnstimeofday(&ts);
+#endif
port->icount.dcd++;
#ifdef CONFIG_HARD_PPS
@@ -508,7 +513,7 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
}
if (ld->ops->dcd_change)
- ld->ops->dcd_change(port, status, &ts);
+ ld->ops->dcd_change(info->port.tty, status, &ts);
tty_ldisc_deref(ld);
}
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists