| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <48ADABDF.1030007@linux.vnet.ibm.com>
Date: Thu, 21 Aug 2008 19:54:39 +0200
From: Peter Oberparleiter <oberpar@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org
CC: Andrew Morton <akpm@...ux-foundation.org>,
Paul Mackerras <paulus@...ba.org>,
Sam Ravnborg <sam@...nborg.org>
Subject: [PATCH -mm] kernel: move CONSTRUCTORS section to asm-generic/vmlinux.lds.h
This patch applies to 2.6.27-rc4 + current -mm patches.
From: Peter Oberparleiter <oberpar@...ux.vnet.ibm.com>
Currently each arch/*/vmlinux.lds file separately mentions the
CONSTRUCTORS section. If it is not mentioned, constructors (such as
needed for the gcov infrastructure) are never called. If it is mentioned
outside of the same section as DATA_DATA, it can lead to linker
problems:
Paul Mackerras <paulus@...ba.org> wrote:
> Ld versions before about 2.18 or so (older than April 2007, I think)
> have a bug where they put things in the wrong order in the output file
> if you don't have all the sections listed in the vmlinux.lds with an
> AT() clause on each one (it seems they all have to have AT(), or
> none). With the gcov stuff turned on, we get a .data.gcov section
> which isn't mentioned in include/asm-generic/vmlinux.lds.h, which
> triggers this bug. This works around the ld bug by making sure
> .data.gcov is mentioned in DATA_DATA.
Moving the CONSTRUCTORS section to DATA_DATA fixes this problem for
powerpc and reduces code duplication across all architectures.
Signed-off-by: Peter Oberparleiter <oberpar@...ux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@...ba.org>
Cc: Sam Ravnborg <sam@...nborg.org>
---
arch/alpha/kernel/vmlinux.lds.S | 1 -
arch/arm/kernel/vmlinux.lds.S | 1 -
arch/avr32/kernel/vmlinux.lds.S | 1 -
arch/blackfin/kernel/vmlinux.lds.S | 1 -
arch/frv/kernel/vmlinux.lds.S | 1 -
arch/ia64/kernel/vmlinux.lds.S | 1 -
arch/m32r/kernel/vmlinux.lds.S | 1 -
arch/m68k/kernel/vmlinux-std.lds | 1 -
arch/m68k/kernel/vmlinux-sun3.lds | 1 -
arch/mips/kernel/vmlinux.lds.S | 1 -
arch/mn10300/kernel/vmlinux.lds.S | 1 -
arch/parisc/kernel/vmlinux.lds.S | 1 -
arch/powerpc/kernel/vmlinux.lds.S | 3 ---
arch/s390/kernel/vmlinux.lds.S | 1 -
arch/sh/kernel/vmlinux_32.lds.S | 1 -
arch/sh/kernel/vmlinux_64.lds.S | 1 -
arch/sparc/kernel/vmlinux.lds.S | 1 -
arch/sparc64/kernel/vmlinux.lds.S | 1 -
arch/um/kernel/dyn.lds.S | 1 -
arch/um/kernel/uml.lds.S | 1 -
arch/x86/kernel/vmlinux_32.lds.S | 1 -
arch/x86/kernel/vmlinux_64.lds.S | 1 -
arch/xtensa/kernel/vmlinux.lds.S | 1 -
include/asm-generic/vmlinux.lds.h | 12 ++++++------
24 files changed, 6 insertions(+), 31 deletions(-)
Index: linux-2.6.26/arch/alpha/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/alpha/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/alpha/kernel/vmlinux.lds.S
@@ -111,7 +111,6 @@ SECTIONS
/* Data */
.data : {
DATA_DATA
- CONSTRUCTORS
}
.got : {
Index: linux-2.6.26/arch/arm/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/arm/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/arm/kernel/vmlinux.lds.S
@@ -161,7 +161,6 @@ SECTIONS
* and the usual data section
*/
DATA_DATA
- CONSTRUCTORS
_edata = .;
}
Index: linux-2.6.26/arch/avr32/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/avr32/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/avr32/kernel/vmlinux.lds.S
@@ -108,7 +108,6 @@ SECTIONS
/* And the rest... */
*(.data.rel*)
DATA_DATA
- CONSTRUCTORS
_edata = .;
}
Index: linux-2.6.26/arch/blackfin/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/blackfin/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/blackfin/kernel/vmlinux.lds.S
@@ -110,7 +110,6 @@ SECTIONS
DATA_DATA
*(.data.*)
- CONSTRUCTORS
/* make sure the init_task is aligned to the
* kernel thread size so we can locate the kernel
Index: linux-2.6.26/arch/frv/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/frv/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/frv/kernel/vmlinux.lds.S
@@ -134,7 +134,6 @@ SECTIONS
DATA_DATA
*(.data.*)
EXIT_DATA
- CONSTRUCTORS
}
_edata = .; /* End of data section */
Index: linux-2.6.26/arch/ia64/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/ia64/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/ia64/kernel/vmlinux.lds.S
@@ -236,7 +236,6 @@ SECTIONS
DATA_DATA
*(.data1)
*(.gnu.linkonce.d*)
- CONSTRUCTORS
}
. = ALIGN(16); /* gp must be 16-byte aligned for exc. table */
Index: linux-2.6.26/arch/m32r/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/m32r/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/m32r/kernel/vmlinux.lds.S
@@ -51,7 +51,6 @@ SECTIONS
*(.spu)
*(.spi)
DATA_DATA
- CONSTRUCTORS
}
. = ALIGN(4096);
Index: linux-2.6.26/arch/m68k/kernel/vmlinux-std.lds
===================================================================
--- linux-2.6.26.orig/arch/m68k/kernel/vmlinux-std.lds
+++ linux-2.6.26/arch/m68k/kernel/vmlinux-std.lds
@@ -31,7 +31,6 @@ SECTIONS
.data : { /* Data */
DATA_DATA
- CONSTRUCTORS
}
.bss : { *(.bss) } /* BSS */
Index: linux-2.6.26/arch/m68k/kernel/vmlinux-sun3.lds
===================================================================
--- linux-2.6.26.orig/arch/m68k/kernel/vmlinux-sun3.lds
+++ linux-2.6.26/arch/m68k/kernel/vmlinux-sun3.lds
@@ -25,7 +25,6 @@ SECTIONS
.data : { /* Data */
DATA_DATA
- CONSTRUCTORS
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
*(__ex_table)
Index: linux-2.6.26/arch/mips/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/mips/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/mips/kernel/vmlinux.lds.S
@@ -79,7 +79,6 @@ SECTIONS
*(.data.init_task)
DATA_DATA
- CONSTRUCTORS
}
_gp = . + 0x8000;
.lit8 : {
Index: linux-2.6.26/arch/mn10300/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/mn10300/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/mn10300/kernel/vmlinux.lds.S
@@ -52,7 +52,6 @@ SECTIONS
/* writeable */
.data : { /* Data */
DATA_DATA
- CONSTRUCTORS
}
. = ALIGN(4096);
Index: linux-2.6.26/arch/parisc/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/parisc/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/parisc/kernel/vmlinux.lds.S
@@ -102,7 +102,6 @@ SECTIONS
/* Data */
.data : {
DATA_DATA
- CONSTRUCTORS
}
. = ALIGN(L1_CACHE_BYTES);
Index: linux-2.6.26/arch/powerpc/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/powerpc/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/powerpc/kernel/vmlinux.lds.S
@@ -222,9 +222,6 @@ SECTIONS
*(.toc)
}
#endif
- .data.gcov : {
- CONSTRUCTORS
- }
. = ALIGN(PAGE_SIZE);
_edata = .;
Index: linux-2.6.26/arch/s390/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/s390/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/s390/kernel/vmlinux.lds.S
@@ -59,7 +59,6 @@ SECTIONS
.data : { /* Data */
DATA_DATA
- CONSTRUCTORS
}
. = ALIGN(PAGE_SIZE);
Index: linux-2.6.26/arch/sh/kernel/vmlinux_32.lds.S
===================================================================
--- linux-2.6.26.orig/arch/sh/kernel/vmlinux_32.lds.S
+++ linux-2.6.26/arch/sh/kernel/vmlinux_32.lds.S
@@ -75,7 +75,6 @@ SECTIONS
__nosave_end = .;
DATA_DATA
- CONSTRUCTORS
}
_edata = .; /* End of data section */
Index: linux-2.6.26/arch/sh/kernel/vmlinux_64.lds.S
===================================================================
--- linux-2.6.26.orig/arch/sh/kernel/vmlinux_64.lds.S
+++ linux-2.6.26/arch/sh/kernel/vmlinux_64.lds.S
@@ -87,7 +87,6 @@ SECTIONS
__nosave_end = .;
DATA_DATA
- CONSTRUCTORS
}
_edata = .; /* End of data section */
Index: linux-2.6.26/arch/sparc/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/sparc/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/sparc/kernel/vmlinux.lds.S
@@ -23,7 +23,6 @@ SECTIONS
RODATA
.data : {
DATA_DATA
- CONSTRUCTORS
}
.data1 : {
*(.data1)
Index: linux-2.6.26/arch/sparc64/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/sparc64/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/sparc64/kernel/vmlinux.lds.S
@@ -26,7 +26,6 @@ SECTIONS
RO_DATA(PAGE_SIZE)
.data : {
DATA_DATA
- CONSTRUCTORS
}
.data1 : {
*(.data1)
Index: linux-2.6.26/arch/um/kernel/dyn.lds.S
===================================================================
--- linux-2.6.26.orig/arch/um/kernel/dyn.lds.S
+++ linux-2.6.26/arch/um/kernel/dyn.lds.S
@@ -102,7 +102,6 @@ SECTIONS
*(.data.init_irqstack)
DATA_DATA
*(.data.* .gnu.linkonce.d.*)
- CONSTRUCTORS
}
.data1 : { *(.data1) }
.tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
Index: linux-2.6.26/arch/um/kernel/uml.lds.S
===================================================================
--- linux-2.6.26.orig/arch/um/kernel/uml.lds.S
+++ linux-2.6.26/arch/um/kernel/uml.lds.S
@@ -58,7 +58,6 @@ SECTIONS
*(.data.init_irqstack)
DATA_DATA
*(.gnu.linkonce.d*)
- CONSTRUCTORS
}
.data1 : { *(.data1) }
.ctors :
Index: linux-2.6.26/arch/x86/kernel/vmlinux_32.lds.S
===================================================================
--- linux-2.6.26.orig/arch/x86/kernel/vmlinux_32.lds.S
+++ linux-2.6.26/arch/x86/kernel/vmlinux_32.lds.S
@@ -64,7 +64,6 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
DATA_DATA
- CONSTRUCTORS
} :data
. = ALIGN(PAGE_SIZE);
Index: linux-2.6.26/arch/x86/kernel/vmlinux_64.lds.S
===================================================================
--- linux-2.6.26.orig/arch/x86/kernel/vmlinux_64.lds.S
+++ linux-2.6.26/arch/x86/kernel/vmlinux_64.lds.S
@@ -55,7 +55,6 @@ SECTIONS
/* Data */
.data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
- CONSTRUCTORS
} :data
_edata = .; /* End of data section */
Index: linux-2.6.26/arch/xtensa/kernel/vmlinux.lds.S
===================================================================
--- linux-2.6.26.orig/arch/xtensa/kernel/vmlinux.lds.S
+++ linux-2.6.26/arch/xtensa/kernel/vmlinux.lds.S
@@ -119,7 +119,6 @@ SECTIONS
.data :
{
DATA_DATA
- CONSTRUCTORS
. = ALIGN(XCHAL_ICACHE_LINESIZE);
*(.data.cacheline_aligned)
}
Index: linux-2.6.26/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-2.6.26.orig/include/asm-generic/vmlinux.lds.h
+++ linux-2.6.26/include/asm-generic/vmlinux.lds.h
@@ -37,6 +37,10 @@
#define MEM_DISCARD(sec) *(.mem##sec)
#endif
+#define CONSTRUCTORS \
+ VMLINUX_SYMBOL(__ctor_start) = .; \
+ *(.ctors) \
+ VMLINUX_SYMBOL(__ctor_end) = .;
/* .data section */
#define DATA_DATA \
@@ -55,7 +59,8 @@
VMLINUX_SYMBOL(__stop___markers) = .; \
VMLINUX_SYMBOL(__start___tracepoints) = .; \
*(__tracepoints) \
- VMLINUX_SYMBOL(__stop___tracepoints) = .;
+ VMLINUX_SYMBOL(__stop___tracepoints) = .; \
+ CONSTRUCTORS
#define RO_DATA(align) \
. = ALIGN((align)); \
@@ -422,8 +427,3 @@
} \
VMLINUX_SYMBOL(__per_cpu_end) = .;
#endif
-
-#define CONSTRUCTORS \
- VMLINUX_SYMBOL(__ctor_start) = .; \
- *(.ctors) \
- VMLINUX_SYMBOL(__ctor_end) = .;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists