| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200808212026.17590.rjw@sisk.pl> Date: Thu, 21 Aug 2008 20:26:16 +0200 From: "Rafael J. Wysocki" <rjw@...k.pl> To: David Greaves <david@...eaves.com> Cc: "'linux-kernel@...r.kernel.org'" <linux-kernel@...r.kernel.org>, xfs@....sgi.com, linux-fsdevel@...r.kernel.org, Dave Chinner <david@...morbit.com>, Andrew Morton <akpm@...ux-foundation.org> Subject: Re: Regression? 2.6.27-rc3 segfault on cold boot; not on warm boot. [Adding CCs] [The issue is probably present in 2.6.26 too] On Thursday, 21 of August 2008, David Greaves wrote: > I have a desktop system that has started having problems booting up in the morning. > > It appears to just happen on more recent kernels. > I was having unrelated CDROM problems with a driver in an old kernel and decided > to test 2.6.27-rcX > The CDROM problem is fine now. > > However I started having problems on -rc1. I found that the machine was hanging > soon after booting and needed a reboot. After a reboot it would work fine for > the rest of the day. > When -rc3 came out I tried that and the problem still appears to be there. > > The normal process is now to boot to single-user, ctrl-alt-sysreq-SUB and then > reboot to multi-user. This isn't ideal. > > > If I cold boot 2.6.25.3 the problem doesn't occur. > I will try different versions over the next few days. > > Sample log from a few days back. (2.6.27-rc1 I think) > > The problem does cause filesystem crashes so I'm cautious about messing around > unguided. > > Happy to try any suggestions. > > David > PS I've run memtest and it's fine. > > > Aug 12 09:49:10 (none) syslogd 1.5.0#5: restart. > Aug 12 09:49:10 (none) kernel: klogd 1.5.0#5, log source = /proc/kmsg started. > Aug 12 09:49:10 (none) kernel: ddr 00:04:e2:cd:ac:db > Aug 12 09:49:10 (none) kernel: via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by > Donald Becker > Aug 12 09:49:10 (none) kernel: via-rhine 0000:00:12.0: PCI INT A -> GSI 23 > (level, low) -> IRQ 23 > Aug 12 09:49:10 (none) kernel: eth1: VIA Rhine II at 0xdd000000, > 00:11:2f:cd:d0:b6, IRQ 23. > Aug 12 09:49:10 (none) kernel: eth1: MII PHY found at address 1, status 0x7849 > advertising 01e1 Link 0000. > Aug 12 09:49:10 (none) kernel: netconsole: local port 6665 > Aug 12 09:49:10 (none) kernel: netconsole: local IP 10.0.0.74 > Aug 12 09:49:10 (none) kernel: netconsole: interface eth0 > Aug 12 09:49:10 (none) kernel: netconsole: remote port 6666 > Aug 12 09:49:10 (none) kernel: netconsole: remote IP 10.0.0.7 > Aug 12 09:49:10 (none) kernel: netconsole: remote ethernet address 00:13:20:55:b6:60 > Aug 12 09:49:10 (none) kernel: netconsole: device eth0 not up yet, forcing it > Aug 12 09:49:10 (none) kernel: skge eth0: enabling interface > Aug 12 09:49:10 (none) kernel: skge eth0: Link is up at 1000 Mbps, full duplex, > flow control both > Aug 12 09:49:10 (none) kernel: console [netcon0] enabled > Aug 12 09:49:10 (none) kernel: netconsole: network logging started > Aug 12 09:49:10 (none) kernel: Driver 'sd' needs updating - please use bus_type > methods > Aug 12 09:49:10 (none) kernel: Driver 'sr' needs updating - please use bus_type > methods > Aug 12 09:49:10 (none) kernel: sata_sil 0000:00:0a.0: version 2.3 > Aug 12 09:49:10 (none) kernel: sata_sil 0000:00:0a.0: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 > Aug 12 09:49:10 (none) kernel: scsi0 : sata_sil > Aug 12 09:49:10 (none) kernel: scsi1 : sata_sil > Aug 12 09:49:10 (none) kernel: ata1: SATA max UDMA/100 mmio m512@...e800000 tf > 0xde800080 irq 16 > Aug 12 09:49:10 (none) kernel: ata2: SATA max UDMA/100 mmio m512@...e800000 tf > 0xde8000c0 irq 16 > Aug 12 09:49:10 (none) kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl > 310) > Aug 12 09:49:10 (none) kernel: ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 > Aug 12 09:49:10 (none) kernel: ata1.00: 625142448 sectors, multi 0: LBA48 NCQ > (depth 0/32) > Aug 12 09:49:10 (none) kernel: ata1.00: configured for UDMA/100 > Aug 12 09:49:10 (none) kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl > 310) > Aug 12 09:49:10 (none) kernel: ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 > Aug 12 09:49:10 (none) kernel: ata2.00: 625142448 sectors, multi 0: LBA48 NCQ > (depth 0/32) > Aug 12 09:49:10 (none) kernel: ata2.00: configured for UDMA/100 > Aug 12 09:49:10 (none) kernel: scsi 0:0:0:0: Direct-Access ATA > ST3320620AS 3.AA PQ: 0 ANSI: 5 > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] 625142448 512-byte hardware > sectors (320073 MB) > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] 625142448 512-byte hardware > sectors (320073 MB) > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sda: sda1 > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Attached SCSI disk > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 > Aug 12 09:49:10 (none) kernel: scsi 1:0:0:0: Direct-Access ATA > ST3320620AS 3.AA PQ: 0 ANSI: 5 > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] 625142448 512-byte hardware > sectors (320073 MB) > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sda: sda1 > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: [sda] Attached SCSI disk > Aug 12 09:49:10 (none) kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 > Aug 12 09:49:10 (none) kernel: scsi 1:0:0:0: Direct-Access ATA > ST3320620AS 3.AA PQ: 0 ANSI: 5 > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] 625142448 512-byte hardware > sectors (320073 MB) > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] 625142448 512-byte hardware > sectors (320073 MB) > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sdb: sdb1 sdb2 > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: [sdb] Attached SCSI disk > Aug 12 09:49:10 (none) kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 > Aug 12 09:49:10 (none) kernel: sata_via 0000:00:0f.0: version 2.3 > Aug 12 09:49:10 (none) kernel: sata_via 0000:00:0f.0: PCI INT B -> GSI 20 > (level, low) -> IRQ 20 > Aug 12 09:49:10 (none) kernel: sata_via 0000:00:0f.0: routed to hard irq line 0 > Aug 12 09:49:10 (none) kernel: scsi2 : sata_via > Aug 12 09:49:10 (none) kernel: scsi3 : sata_via > Aug 12 09:49:10 (none) kernel: ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 > bmdma 0x8400 irq 20 > Aug 12 09:49:10 (none) kernel: ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 > bmdma 0x8408 irq 20 > Aug 12 09:49:10 (none) kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl > 300) > Aug 12 09:49:10 (none) kernel: ata3.00: ATA-7: Maxtor 6L300S0, BANC1E00, max > UDMA/133 > Aug 12 09:49:10 (none) kernel: ata3.00: 586114704 sectors, multi 16: LBA48 NCQ > (not used) > Aug 12 09:49:10 (none) kernel: ata3.00: configured for UDMA/133 > Aug 12 09:49:10 (none) kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl > 300) > Aug 12 09:49:10 (none) kernel: ata4.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133 > Aug 12 09:49:10 (none) kernel: ata4.00: 625134827 sectors, multi 16: LBA48 NCQ > (depth 0/32) > Aug 12 09:49:10 (none) kernel: ata4.00: configured for UDMA/133 > Aug 12 09:49:10 (none) kernel: scsi 2:0:0:0: Direct-Access ATA Maxtor > 6L300S0 BANC PQ: 0 ANSI: 5 > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] 586114704 512-byte hardware > sectors (300091 MB) > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] 586114704 512-byte hardware > sectors (300091 MB) > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sdc: sdc1 sdc2 > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: [sdc] Attached SCSI disk > Aug 12 09:49:10 (none) kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0 > Aug 12 09:49:10 (none) kernel: scsi 3:0:0:0: Direct-Access ATA > ST3320620AS 3.AA PQ: 0 ANSI: 5 > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] 625134827 512-byte hardware > sectors (320069 MB) > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] 625134827 512-byte hardware > sectors (320069 MB) > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Write Protect is off > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read > cache: enabled, doesn't support DPO or FUA > Aug 12 09:49:10 (none) kernel: sdd: sdd1 sdd2 sdd3 > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: [sdd] Attached SCSI disk > Aug 12 09:49:10 (none) kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0 > Aug 12 09:49:10 (none) kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] > at 0x60,0x64 irq 1,12 > Aug 12 09:49:10 (none) kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 > Aug 12 09:49:10 (none) kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 > Aug 12 09:49:10 (none) kernel: mice: PS/2 mouse device common for all mice > Aug 12 09:49:10 (none) kernel: input: AT Translated Set 2 keyboard as > /class/input/input2 > Aug 12 09:49:10 (none) kernel: md: raid1 personality registered for level 1 > Aug 12 09:49:10 (none) kernel: raid6: int32x1 925 MB/s > Aug 12 09:49:10 (none) kernel: raid6: int32x2 972 MB/s > Aug 12 09:49:10 (none) kernel: raid6: int32x4 789 MB/s > Aug 12 09:49:10 (none) kernel: raid6: int32x8 636 MB/s > Aug 12 09:49:10 (none) kernel: raid6: mmxx1 1753 MB/s > Aug 12 09:49:10 (none) kernel: raid6: mmxx2 3128 MB/s > Aug 12 09:49:10 (none) kernel: raid6: sse1x1 1644 MB/s > Aug 12 09:49:10 (none) kernel: raid6: sse1x2 2781 MB/s > Aug 12 09:49:10 (none) kernel: raid6: using algorithm sse1x2 (2781 MB/s) > Aug 12 09:49:10 (none) kernel: md: raid6 personality registered for level 6 > Aug 12 09:49:10 (none) kernel: md: raid5 personality registered for level 5 > Aug 12 09:49:10 (none) kernel: md: raid4 personality registered for level 4 > Aug 12 09:49:10 (none) kernel: TCP cubic registered > Aug 12 09:49:10 (none) kernel: Using IPI Shortcut mode > Aug 12 09:49:10 (none) kernel: PM: Resume from partition /dev/sdd3 > Aug 12 09:49:10 (none) kernel: PM: Checking hibernation image. > Aug 12 09:49:10 (none) kernel: PM: Resume from disk failed. > Aug 12 09:49:10 (none) kernel: input: ImExPS/2 Generic Explorer Mouse as > /class/input/input3 > Aug 12 09:49:10 (none) kernel: md: Autodetecting RAID arrays. > Aug 12 09:49:10 (none) kernel: md: Scanned 2 and added 2 devices. > Aug 12 09:49:10 (none) kernel: md: autorun ... > Aug 12 09:49:10 (none) kernel: md: considering sdc2 ... > Aug 12 09:49:10 (none) kernel: md: adding sdc2 ... > Aug 12 09:49:10 (none) kernel: md: adding sdb2 ... > Aug 12 09:49:10 (none) kernel: md: created md0 > Aug 12 09:49:10 (none) kernel: md: bind<sdb2> > Aug 12 09:49:10 (none) kernel: md: bind<sdc2> > Aug 12 09:49:10 (none) kernel: md: running: <sdc2><sdb2> > Aug 12 09:49:10 (none) kernel: raid1: raid set md0 active with 2 out of 2 mirrors > Aug 12 09:49:10 (none) kernel: md: ... autorun DONE. > Aug 12 09:49:10 (none) kernel: Filesystem "md0": Disabling barriers, not > supported by the underlying device > Aug 12 09:49:10 (none) kernel: XFS mounting filesystem md0 > Aug 12 09:49:10 (none) kernel: Ending clean XFS mount for filesystem: md0 > Aug 12 09:49:10 (none) kernel: VFS: Mounted root (xfs filesystem) readonly. > Aug 12 09:49:10 (none) kernel: Freeing unused kernel memory: 248k freed > Aug 12 09:49:10 (none) kernel: uname[892]: segfault at ffffffbf ip ffffffbf sp > bfb4b09c error 4 > Aug 12 09:49:10 (none) kernel: cat[894]: segfault at ffffffbf ip ffffffbf sp > bfb121ec error 4 > Aug 12 09:49:10 (none) kernel: uname[898]: segfault at ffffffbf ip ffffffbf sp > bfccc22c error 4 > Aug 12 09:49:10 (none) kernel: uname[903]: segfault at ffffffbf ip ffffffbf sp > bfb8a0ec error 4 > Aug 12 09:49:10 (none) kernel: uname[910]: segfault at ffffffbf ip ffffffbf sp > bfd7f2ec error 4 > Aug 12 09:49:10 (none) kernel: uname[922]: segfault at ffffffbf ip ffffffbf sp > bffbe51c error 4 > Aug 12 09:49:10 (none) kernel: uname[923]: segfault at ffffffbf ip ffffffbf sp > bf8dae3c error 4 > Aug 12 09:49:10 (none) kernel: uname[1004]: segfault at ffffffbf ip ffffffbf sp > bff2dc8c error 4 > Aug 12 09:49:10 (none) kernel: uname[1005]: segfault at ffffffbf ip ffffffbf sp > bfd86adc error 4 > Aug 12 09:49:10 (none) kernel: Adding 2048276k swap on /dev/sdd3. Priority:-1 > extents:1 across:2048276k > Aug 12 09:49:10 (none) kernel: Filesystem "md0": Disabling barriers, not > supported by the underlying device > Aug 12 09:49:10 (none) kernel: uname[1032]: segfault at ffffffbf ip ffffffbf sp > bffd453c error 4 > Aug 12 09:49:10 (none) kernel: device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) > initialised: dm-devel@...hat.com > Aug 12 09:49:10 (none) kernel: Filesystem "md0": XFS internal error > xfs_btree_check_sblock at line 334 of file fs/xfs/xfs_btree.c. Caller 0xc01f51fa > Aug 12 09:49:10 (none) kernel: Pid: 1113, comm: sh Not tainted 2.6.27-rc1 #10 > Aug 12 09:49:10 (none) kernel: [<c01efe64>] ? xfs_cmn_err+0x34/0x60 > Aug 12 09:49:10 (none) kernel: [<c01efede>] xfs_error_report+0x4e/0x50 > Aug 12 09:49:10 (none) kernel: [<c01f51fa>] ? xfs_inobt_lookup+0xfa/0x3a0 > Aug 12 09:49:10 (none) kernel: [<c01e29c6>] xfs_btree_check_sblock+0x56/0xd0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists