| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080822011055.GI23377@hoblitt.com>
Date: Thu, 21 Aug 2008 15:10:55 -1000
From: Joshua Hoblitt <josh@...litt.com>
To: Yinghai Lu <yhlu.kernel@...il.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
bugme-daemon@...zilla.kernel.org, linux-kernel@...r.kernel.org,
j_kernel@...litt.com
Subject: Re: [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of
16gb of memory is usable
Ugh - I just realized I forgot to type "-dirty" into grub after
rebuilding the kernel. Here is the new dmesg with the msr trace.
-J
--
On Thu, Aug 21, 2008 at 03:00:14PM -1000, Joshua Hoblitt wrote:
> I have applied your patch to the tip tree and rebuilt. Still no msr
> dump.
>
> -J
>
> --
> On Thu, Aug 21, 2008 at 02:29:52PM -1000, Joshua Hoblitt wrote:
> > Lol. No - I thought you implied it was in the tip tree. Sigh. I'll
> > try again.
> >
> > -J
> >
> > --
> > On Thu, Aug 21, 2008 at 05:28:51PM -0700, Yinghai Lu wrote:
> > > On Thu, Aug 21, 2008 at 5:10 PM, Joshua Hoblitt <josh@...litt.com> wrote:
> > > > The dmesg from the tip kernel is attached and it's at least larger than
> > > > the last builds dmesg.
> > >
> > > did you apply my debug patch?
> > > you should get msr print out...
> > >
> > > YH
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Linux version 2.6.27-rc4-tip-00862-gcc150c8 (root@...000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Thu Aug 21 13:52:09 HST 2008
> [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable)
> [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
> [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM.
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1558 mtrr_trim_uncached_memory+0x522/0x54b()
> [ 0.000000] Modules linked in:
> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-tip-00862-gcc150c8 #1
> [ 0.000000] Call Trace:
> [ 0.000000] [<ffffffff80237573>] warn_on_slowpath+0x51/0x77
> [ 0.000000] [<ffffffff8023808b>] printk+0x4e/0x56
> [ 0.000000] [<ffffffff803b1942>] sort+0xfa/0x18c
> [ 0.000000] [<ffffffff80802a5b>] cmp_range+0x0/0x6
> [ 0.000000] [<ffffffff808030e9>] mtrr_trim_uncached_memory+0x522/0x54b
> [ 0.000000] [<ffffffff802194d9>] post_set+0x20/0x3d
> [ 0.000000] [<ffffffff807ff4df>] setup_arch+0x39d/0x6d7
> [ 0.000000] [<ffffffff8024702e>] kernel_text_address+0x9/0x26
> [ 0.000000] [<ffffffff8024c4de>] notifier_chain_register+0x14/0x55
> [ 0.000000] [<ffffffff807f8a1d>] start_kernel+0x74/0x346
> [ 0.000000] [<ffffffff807f8394>] x86_64_start_kernel+0xe3/0xe7
> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
> [ 0.000000] update e820 for mtrr
> [ 0.000000] modified physical RAM map:
> [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable)
> [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved)
> [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved)
> [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable)
> [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data)
> [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
> [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved)
> [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved)
> [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff
> [ 0.000000] init_memory_mapping
> [ 0.000000] 0000000000 - 00cfe00000 page 2M
> [ 0.000000] 00cfe00000 - 00cff00000 page 4k
> [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
> [ 0.000000] last_map_addr: cff00000 end: cff00000
> [ 0.000000] RAMDISK: 37e10000 - 37fef7d5
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD )
> [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0)
> [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3)
> [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000)
> [ 0.000000] ACPI: FACS CFF0AFC0, 0040
> [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1)
> [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0)
> [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0)
> [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
> [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
> [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-00000000cff00000
> [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000
> [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff]
> [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a
> [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> [ 0.000000] #2 [0000200000 - 00009beef0] TEXT DATA BSS ==> [0000200000 - 00009beef0]
> [ 0.000000] #3 [0037e10000 - 0037fef7d5] RAMDISK ==> [0037e10000 - 0037fef7d5]
> [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
> [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
> [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050
> [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00100000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x000cff00
> [ 0.000000] On node 0 totalpages: 851614
> [ 0.000000] DMA zone: 1846 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
> [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
> [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
> [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
> [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000
> [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000
> [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000
> [ 0.000000] dyn_array total_size: 0x4000
> [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x101c000 - 0x101d000]
> [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x101d000 - 0x101d600]
> [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x101e000 - 0x1020000]
> [ 0.000000] kstat_irqs ==> [0x1020000 - 0x1020400]
> [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
> [ 0.000000] per cpu data for cpu0 on node0 at 0000000001021000
> [ 0.000000] per cpu data for cpu1 on node0 at 000000000102d000
> [ 0.000000] per cpu data for cpu2 on node0 at 0000000001039000
> [ 0.000000] per cpu data for cpu3 on node0 at 0000000001045000
> [ 0.000000] per cpu data for cpu4 on node0 at 0000000001051000
> [ 0.000000] per cpu data for cpu5 on node0 at 000000000105d000
> [ 0.000000] per cpu data for cpu6 on node0 at 0000000001069000
> [ 0.000000] per cpu data for cpu7 on node0 at 0000000001075000
> [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836218
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
> [ 0.000000] Initializing CPU#0
> [ 0.000000] found new irq_desc for irq 0
> [ 0.000000] found new irq_desc for irq 1
> [ 0.000000] found new irq_desc for irq 2
> [ 0.000000] found new irq_desc for irq 3
> [ 0.000000] found new irq_desc for irq 4
> [ 0.000000] found new irq_desc for irq 5
> [ 0.000000] found new irq_desc for irq 6
> [ 0.000000] found new irq_desc for irq 7
> [ 0.000000] found new irq_desc for irq 8
> [ 0.000000] found new irq_desc for irq 9
> [ 0.000000] found new irq_desc for irq 10
> [ 0.000000] found new irq_desc for irq 11
> [ 0.000000] found new irq_desc for irq 12
> [ 0.000000] found new irq_desc for irq 13
> [ 0.000000] found new irq_desc for irq 14
> [ 0.000000] found new irq_desc for irq 15
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] TSC calibrated against PM_TIMER
> [ 0.000000] Detected 3192.003 MHz processor.
> [ 0.003333] Console: colour VGA+ 80x25
> [ 0.003333] console [tty0] enabled
> [ 0.003333] console [ttyS0] enabled
> [ 0.003333] Checking aperture...
> [ 0.003333] No AGP bridge found
> [ 0.003333] Memory: 3342444k/3406848k available (3830k kernel code, 64012k reserved, 2175k data, 672k init)
> [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.00 BogoMIPS (lpj=10640010)
> [ 0.013090] Security Framework initialized
> [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.021482] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.026664] Mount-cache hash table entries: 256
> [ 0.029998] Initializing cgroup subsys ns
> [ 0.033331] Initializing cgroup subsys cpuacct
> [ 0.036664] Initializing cgroup subsys memory
> [ 0.039997] Initializing cgroup subsys devices
> [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.048295] CPU: L2 cache: 6144K
> [ 0.051718] CPU 0/0 -> Node 0
> [ 0.054884] CPU: Physical Processor ID: 0
> [ 0.059078] CPU: Processor Core ID: 0
> [ 0.062932] CPU0: Thermal monitoring enabled (TM2)
> [ 0.066662] using mwait in idle threads.
> [ 0.069995] ACPI: Core revision 20080609
> [ 0.082433] Setting APIC routing to flat
> [ 0.086661] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1
> [ 0.086661] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2
> [ 0.086661] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3
> [ 0.086661] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4
> [ 0.086661] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5
> [ 0.086661] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6
> [ 0.086661] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7
> [ 0.086661] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8
> [ 0.086661] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9
> [ 0.086661] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10
> [ 0.086661] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11
> [ 0.086661] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12
> [ 0.086661] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13
> [ 0.086661] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14
> [ 0.086661] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15
> [ 0.086661] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.122915] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.133324] APIC timer calibration result 24937581
> [ 0.133324] Detected 24.937 MHz APIC timer.
> [ 0.136657] Booting processor 1/4 ip 6000
> [ 0.149990] Initializing CPU#1
> [ 0.149990] Calibrating delay using timer specific routine.. 6386.12 BogoMIPS (lpj=10640193)
> [ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.149990] CPU: L2 cache: 6144K
> [ 0.149990] CPU 1/4 -> Node 0
> [ 0.149990] CPU: Physical Processor ID: 1
> [ 0.149990] CPU: Processor Core ID: 0
> [ 0.149990] CPU1: Thermal monitoring enabled (TM2)
> [ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> [ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.243317] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.246829] Booting processor 2/1 ip 6000
> [ 0.263316] Initializing CPU#2
> [ 0.263316] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640154)
> [ 0.263316] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.263316] CPU: L2 cache: 6144K
> [ 0.263316] CPU 2/1 -> Node 0
> [ 0.263316] CPU: Physical Processor ID: 0
> [ 0.263316] CPU: Processor Core ID: 1
> [ 0.263316] CPU2: Thermal monitoring enabled (TM2)
> [ 0.263316] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
> [ 0.344816] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.353310] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [ 0.356643] Booting processor 3/5 ip 6000
> [ 0.369975] Initializing CPU#3
> [ 0.369975] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640161)
> [ 0.369975] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.369975] CPU: L2 cache: 6144K
> [ 0.369975] CPU 3/5 -> Node 0
> [ 0.369975] CPU: Physical Processor ID: 1
> [ 0.369975] CPU: Processor Core ID: 1
> [ 0.369975] CPU3: Thermal monitoring enabled (TM2)
> [ 0.369975] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
> [ 0.453303] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.459970] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [ 0.463303] Booting processor 4/2 ip 6000
> [ 0.476635] Initializing CPU#4
> [ 0.476635] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640144)
> [ 0.476635] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.476635] CPU: L2 cache: 6144K
> [ 0.476635] CPU 4/2 -> Node 0
> [ 0.476635] CPU: Physical Processor ID: 0
> [ 0.476635] CPU: Processor Core ID: 2
> [ 0.476635] CPU4: Thermal monitoring enabled (TM2)
> [ 0.476635] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
> [ 0.559967] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.566633] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
> [ 0.569967] Booting processor 5/6 ip 6000
> [ 0.583295] Initializing CPU#5
> [ 0.583295] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640124)
> [ 0.583295] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.583295] CPU: L2 cache: 6144K
> [ 0.583295] CPU 5/6 -> Node 0
> [ 0.583295] CPU: Physical Processor ID: 1
> [ 0.583295] CPU: Processor Core ID: 2
> [ 0.583295] CPU5: Thermal monitoring enabled (TM2)
> [ 0.583295] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
> [ 0.666633] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.673300] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
> [ 0.676633] Booting processor 6/3 ip 6000
> [ 0.689955] Initializing CPU#6
> [ 0.689955] Calibrating delay using timer specific routine.. 6386.07 BogoMIPS (lpj=10640124)
> [ 0.689955] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.689955] CPU: L2 cache: 6144K
> [ 0.689955] CPU 6/3 -> Node 0
> [ 0.689955] CPU: Physical Processor ID: 0
> [ 0.689955] CPU: Processor Core ID: 3
> [ 0.689955] CPU6: Thermal monitoring enabled (TM2)
> [ 0.689955] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
> [ 0.773300] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.779967] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
> [ 0.783300] Booting processor 7/7 ip 6000
> [ 0.796614] Initializing CPU#7
> [ 0.796614] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640182)
> [ 0.796614] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.796614] CPU: L2 cache: 6144K
> [ 0.796614] CPU 7/7 -> Node 0
> [ 0.796614] CPU: Physical Processor ID: 1
> [ 0.796614] CPU: Processor Core ID: 3
> [ 0.796614] CPU7: Thermal monitoring enabled (TM2)
> [ 0.796614] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
> [ 0.879967] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
> [ 0.886633] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
> [ 0.889967] Brought up 8 CPUs
> [ 0.893127] Total of 8 processors activated (51093.68 BogoMIPS).
> [ 0.896634] net_namespace: 864 bytes
> [ 0.899967] xor: automatically using best checksumming function: generic_sse
> [ 0.919003] generic_sse: 11872.800 MB/sec
> [ 0.923300] xor: using function: generic_sse (11872.800 MB/sec)
> [ 0.926633] NET: Registered protocol family 16
> [ 0.929967] No dock devices found.
> [ 0.933300] ACPI: bus type pci registered
> [ 0.936633] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
> [ 0.939967] PCI: MCFG area at e0000000 reserved in E820
> [ 0.943300] PCI: Using MMCONFIG at e0000000 - e08fffff
> [ 0.946633] PCI: Using configuration type 1 for base access
> [ 0.953300] ACPI: EC: Look up EC in DSDT
> [ 0.956633] ACPI: Interpreter enabled
> [ 0.959967] ACPI: (supports S0 S3 S4 S5)
> [ 0.963300] ACPI: Using IOAPIC for interrupt routing
> [ 0.969967] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.973300] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> [ 0.976633] pci 0000:00:00.0: PME# disabled
> [ 0.979967] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.983300] pci 0000:00:01.0: PME# disabled
> [ 0.986633] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
> [ 0.989967] pci 0000:00:05.0: PME# disabled
> [ 0.993300] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
> [ 0.996633] pci 0000:00:09.0: PME# disabled
> [ 0.999967] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 1.003300] pci 0000:00:1b.0: PME# disabled
> [ 1.006633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 1.009967] pci 0000:00:1c.0: PME# disabled
> [ 1.013300] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 1.016633] pci 0000:00:1d.7: PME# disabled
> [ 1.019967] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> [ 1.019967] pci 0000:01:00.0: supports D1
> [ 1.019967] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff]
> [ 1.023300] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 1.026633] pci 0000:03:00.0: PME# disabled
> [ 1.029967] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
> [ 1.033300] pci 0000:03:00.3: PME# disabled
> [ 1.036633] PCI: bridge 0000:00:09.0 io port: [2000, 2fff]
> [ 1.039967] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff]
> [ 1.043300] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> [ 1.046633] pci 0000:04:00.0: PME# disabled
> [ 1.049967] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
> [ 1.053300] pci 0000:04:02.0: PME# disabled
> [ 1.056633] PCI: bridge 0000:03:00.0 io port: [2000, 2fff]
> [ 1.059967] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff]
> [ 1.063300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
> [ 1.066633] pci 0000:06:00.0: PME# disabled
> [ 1.069967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
> [ 1.073300] pci 0000:06:00.1: PME# disabled
> [ 1.076633] PCI: bridge 0000:04:02.0 io port: [2000, 2fff]
> [ 1.079967] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff]
> [ 1.083300] pci 0000:09:05.0: supports D1
> [ 1.083300] pci 0000:09:05.0: supports D2
> [ 1.083300] pci 0000:09:06.0: supports D2
> [ 1.083300] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold
> [ 1.086633] pci 0000:09:06.0: PME# disabled
> [ 1.089967] pci 0000:00:1e.0: transparent bridge
> [ 1.093300] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff]
> [ 1.096633] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff]
> [ 1.099967] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff]
> [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> [ 1.103300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [ 1.104010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT]
> [ 1.104195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT]
> [ 1.104463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT]
> [ 1.104813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT]
> [ 1.105290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> [ 1.105857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [ 1.113300] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
> [ 1.119752] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
> [ 1.126417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
> [ 1.133099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
> [ 1.139759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
> [ 1.146424] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
> [ 1.152859] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
> [ 1.159752] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
> [ 1.166633] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 1.169967] pnp: PnP ACPI init
> [ 1.173279] ACPI: bus type pnp registered
> [ 1.179967] pnp: PnP ACPI: found 11 devices
> [ 1.183300] ACPI: ACPI bus type pnp unregistered
> [ 1.186633] SCSI subsystem initialized
> [ 1.189967] libata version 3.00 loaded.
> [ 1.189967] usbcore: registered new interface driver usbfs
> [ 1.193300] usbcore: registered new interface driver hub
> [ 1.196633] usbcore: registered new device driver usb
> [ 1.199967] PCI: Using ACPI for IRQ routing
> [ 1.218715] PCI-GART: No AMD northbridge found.
> [ 1.223300] hpet clockevent registered
> [ 1.223300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 1.228475] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> [ 1.233300] ACPI: RTC can wake from S4
> [ 1.244882] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
> [ 1.248222] system 00:01: ioport range 0x800-0x80f has been reserved
> [ 1.254771] system 00:01: ioport range 0x1000-0x107f has been reserved
> [ 1.261422] system 00:01: ioport range 0x1180-0x11bf has been reserved
> [ 1.268151] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
> [ 1.274872] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
> [ 1.282705] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
> [ 1.290524] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
> [ 1.298349] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
> [ 1.305674] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved
> [ 1.313012] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
> [ 1.320342] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
> [ 1.332484] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> [ 1.334892] pci 0000:00:01.0: IO window: disabled
> [ 1.339968] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff
> [ 1.346259] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
> [ 1.354179] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
> [ 1.360300] pci 0000:00:05.0: IO window: disabled
> [ 1.365379] pci 0000:00:05.0: MEM window: disabled
> [ 1.374717] pci 0000:00:05.0: PREFETCH window: disabled
> [ 1.380313] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
> [ 1.386432] pci 0000:04:00.0: IO window: disabled
> [ 1.391510] pci 0000:04:00.0: MEM window: disabled
> [ 1.396674] pci 0000:04:00.0: PREFETCH window: disabled
> [ 1.402276] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06
> [ 1.408392] pci 0000:04:02.0: IO window: 0x2000-0x2fff
> [ 1.413904] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff
> [ 1.420197] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
> [ 1.428122] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
> [ 1.434245] pci 0000:03:00.0: IO window: 0x2000-0x2fff
> [ 1.439763] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff
> [ 1.446053] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
> [ 1.453970] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07
> [ 1.460088] pci 0000:03:00.3: IO window: disabled
> [ 1.465168] pci 0000:03:00.3: MEM window: disabled
> [ 1.470332] pci 0000:03:00.3: PREFETCH window: disabled
> [ 1.475931] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
> [ 1.482571] pci 0000:00:09.0: IO window: 0x2000-0x2fff
> [ 1.488091] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff
> [ 1.494393] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
> [ 1.502310] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
> [ 1.508425] pci 0000:00:1c.0: IO window: disabled
> [ 1.513500] pci 0000:00:1c.0: MEM window: disabled
> [ 1.518654] pci 0000:00:1c.0: PREFETCH window: disabled
> [ 1.524259] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
> [ 1.530377] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
> [ 1.535887] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
> [ 1.542182] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
> [ 1.550105] found new irq_cfg for irq 16
> [ 1.550114] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16
> [ 1.550127] found new irq_desc for irq 16
> [ 1.550142] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.557012] pci 0000:00:01.0: setting latency timer to 64
> [ 1.557019] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.563917] pci 0000:00:05.0: setting latency timer to 64
> [ 1.563922] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.570818] pci 0000:00:09.0: setting latency timer to 64
> [ 1.570824] vendor=8086 device=4029
> [ 1.574510] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.581417] pci 0000:03:00.0: setting latency timer to 64
> [ 1.581424] vendor=8086 device=3500
> [ 1.585108] vendor=8086 device=4029
> [ 1.588793] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.595689] pci 0000:04:00.0: setting latency timer to 64
> [ 1.595696] vendor=8086 device=3500
> [ 1.599376] vendor=8086 device=4029
> [ 1.603056] found new irq_cfg for irq 18
> [ 1.603058] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18
> [ 1.603063] found new irq_desc for irq 18
> [ 1.603069] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 1.609965] pci 0000:04:02.0: setting latency timer to 64
> [ 1.609974] pci 0000:03:00.3: setting latency timer to 64
> [ 1.609986] found new irq_cfg for irq 21
> [ 1.610000] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21
> [ 1.610015] found new irq_desc for irq 21
> [ 1.610032] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> [ 1.616882] pci 0000:00:1c.0: setting latency timer to 64
> [ 1.616889] pci 0000:00:1e.0: setting latency timer to 64
> [ 1.616897] bus: 00 index 0 io port: [0, ffff]
> [ 1.621539] bus: 00 index 1 mmio: [0, ffffffffffffffff]
> [ 1.626955] bus: 01 index 0 mmio: [0, 0]
> [ 1.631078] bus: 01 index 1 mmio: [dc100000, dc1fffff]
> [ 1.636412] bus: 01 index 2 mmio: [d1000000, d10fffff]
> [ 1.641750] bus: 01 index 3 mmio: [0, 0]
> [ 1.645873] bus: 02 index 0 mmio: [0, 0]
> [ 1.649990] bus: 02 index 1 mmio: [0, 0]
> [ 1.654109] bus: 02 index 2 mmio: [0, 0]
> [ 1.658230] bus: 02 index 3 mmio: [0, 0]
> [ 1.662348] bus: 03 index 0 io port: [2000, 2fff]
> [ 1.667245] bus: 03 index 1 mmio: [dc200000, dc3fffff]
> [ 1.672577] bus: 03 index 2 mmio: [d1100000, d11fffff]
> [ 1.677915] bus: 03 index 3 mmio: [0, 0]
> [ 1.682029] bus: 04 index 0 io port: [2000, 2fff]
> [ 1.686928] bus: 04 index 1 mmio: [dc200000, dc2fffff]
> [ 1.692258] bus: 04 index 2 mmio: [d1100000, d11fffff]
> [ 1.697600] bus: 04 index 3 mmio: [0, 0]
> [ 1.701721] bus: 05 index 0 mmio: [0, 0]
> [ 1.705839] bus: 05 index 1 mmio: [0, 0]
> [ 1.709955] bus: 05 index 2 mmio: [0, 0]
> [ 1.714070] bus: 05 index 3 mmio: [0, 0]
> [ 1.718186] bus: 06 index 0 io port: [2000, 2fff]
> [ 1.723086] bus: 06 index 1 mmio: [dc200000, dc2fffff]
> [ 1.728425] bus: 06 index 2 mmio: [d1100000, d11fffff]
> [ 1.733763] bus: 06 index 3 mmio: [0, 0]
> [ 1.738390] bus: 07 index 0 mmio: [0, 0]
> [ 1.742506] bus: 07 index 1 mmio: [0, 0]
> [ 1.746618] bus: 07 index 2 mmio: [0, 0]
> [ 1.750740] bus: 07 index 3 mmio: [0, 0]
> [ 1.754860] bus: 08 index 0 mmio: [0, 0]
> [ 1.758982] bus: 08 index 1 mmio: [0, 0]
> [ 1.763097] bus: 08 index 2 mmio: [0, 0]
> [ 1.767214] bus: 08 index 3 mmio: [0, 0]
> [ 1.771340] bus: 09 index 0 io port: [3000, 3fff]
> [ 1.776235] bus: 09 index 1 mmio: [dc000000, dc0fffff]
> [ 1.781569] bus: 09 index 2 mmio: [d8000000, dbffffff]
> [ 1.786908] bus: 09 index 3 io port: [0, ffff]
> [ 1.791553] bus: 09 index 4 mmio: [0, ffffffffffffffff]
> [ 1.796987] NET: Registered protocol family 2
> [ 1.838223] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 1.843532] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> [ 1.854890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 1.861233] TCP: Hash tables configured (established 524288 bind 65536)
> [ 1.868057] TCP reno registered
> [ 1.881545] NET: Registered protocol family 1
> [ 1.884977] checking if image is initramfs... it is
> [ 1.938223] Freeing initrd memory: 1917k freed
> [ 1.941956] pci 0000:09:05.0: Boot video device
> [ 1.945345] input: Power Button (FF) as /class/input/input0
> [ 1.948325] ACPI: Power Button (FF) [PWRF]
> [ 1.955648] input: Power Button (CM) as /class/input/input1
> [ 1.958933] ACPI: Power Button (CM) [PWRB]
> [ 1.966437] found new irq_cfg for irq 20
> [ 1.966437] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20
> [ 1.966437] found new irq_desc for irq 20
> [ 1.966437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 1.964114] Switched to high resolution mode on CPU 2
> [ 1.966445] Switched to high resolution mode on CPU 3
> [ 1.966443] Switched to high resolution mode on CPU 6
> [ 1.964258] Switched to high resolution mode on CPU 5
> [ 1.964674] Switched to high resolution mode on CPU 4
> [ 1.964749] Switched to high resolution mode on CPU 7
> [ 1.964966] Switched to high resolution mode on CPU 1
> [ 1.969989] Switched to high resolution mode on CPU 0
> [ 1.969998] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 1.970011] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 2.228142] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> [ 2.228142] ehci_hcd 0000:00:1d.7: debug port 1
> [ 2.228142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 2.228142] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000
> [ 2.228142] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 2.228142] usb usb1: configuration #1 chosen from 1 choice
> [ 2.228142] hub 1-0:1.0: USB hub found
> [ 2.228142] hub 1-0:1.0: 8 ports detected
> [ 2.228142] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.228142] USB Universal Host Controller Interface driver v3.0
> [ 2.228142] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 2.228142] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 2.228142] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 2.228142] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 2.228142] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
> [ 2.228142] usb usb2: configuration #1 chosen from 1 choice
> [ 2.228142] hub 2-0:1.0: USB hub found
> [ 2.228142] hub 2-0:1.0: 2 ports detected
> [ 2.289994] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 2.293342] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 2.293348] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 2.298045] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> [ 2.306325] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
> [ 2.311447] usb usb3: configuration #1 chosen from 1 choice
> [ 2.318062] hub 3-0:1.0: USB hub found
> [ 2.322075] hub 3-0:1.0: 2 ports detected
> [ 2.431244] found new irq_cfg for irq 22
> [ 2.431244] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22
> [ 2.431244] found new irq_desc for irq 22
> [ 2.431244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 2.436673] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 2.436680] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 2.441397] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> [ 2.449669] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
> [ 2.454791] usb usb4: configuration #1 chosen from 1 choice
> [ 2.461395] hub 4-0:1.0: USB hub found
> [ 2.465407] hub 4-0:1.0: 2 ports detected
> [ 2.574578] found new irq_cfg for irq 23
> [ 2.574578] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23
> [ 2.574578] found new irq_desc for irq 23
> [ 2.574578] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
> [ 2.580007] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 2.580013] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 2.584712] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [ 2.593003] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
> [ 2.598150] usb usb5: configuration #1 chosen from 1 choice
> [ 2.604718] hub 5-0:1.0: USB hub found
> [ 2.608733] hub 5-0:1.0: 2 ports detected
> [ 2.717911] Simple Boot Flag at 0x40 set to 0x80
> [ 2.724792] audit: initializing netlink socket (disabled)
> [ 2.731484] type=2000 audit(1219366433.726:1): initialized
> [ 2.743333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 2.753334] VFS: Disk quotas dquot_6.5.1
> [ 2.755221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 2.766667] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
> [ 2.770319] msgmni has been set to 6531
> [ 2.774691] async_tx: api initialized (async)
> [ 2.778128] io scheduler noop registered
> [ 2.782240] io scheduler anticipatory registered
> [ 2.787039] io scheduler deadline registered
> [ 2.792639] io scheduler cfq registered (default)
> [ 2.797918] pcieport-driver 0000:00:01.0: setting latency timer to 64
> [ 2.797918] pcieport-driver 0000:00:01.0: found MSI capability
> [ 2.804128] found new irq_cfg for irq 33024
> [ 2.804128] found new irq_desc for irq 33024
> [ 2.804128] pci_express 0000:00:01.0:pcie00: allocate port service
> [ 2.804584] pci_express 0000:00:01.0:pcie01: allocate port service
> [ 2.804584] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 2.804584] pcieport-driver 0000:00:05.0: found MSI capability
> [ 2.807391] found new irq_cfg for irq 164096
> [ 2.807405] found new irq_desc for irq 164096
> [ 2.807426] pci_express 0000:00:05.0:pcie00: allocate port service
> [ 2.808096] pci_express 0000:00:05.0:pcie01: allocate port service
> [ 2.808923] pcieport-driver 0000:00:09.0: setting latency timer to 64
> [ 2.809117] pcieport-driver 0000:00:09.0: found MSI capability
> [ 2.815332] found new irq_cfg for irq 295168
> [ 2.815343] found new irq_desc for irq 295168
> [ 2.815361] pci_express 0000:00:09.0:pcie00: allocate port service
> [ 2.815698] pci_express 0000:00:09.0:pcie01: allocate port service
> [ 2.816495] pcieport-driver 0000:00:1c.0: setting latency timer to 64
> [ 2.816495] pcieport-driver 0000:00:1c.0: found MSI capability
> [ 2.822721] found new irq_cfg for irq 917760
> [ 2.822722] found new irq_desc for irq 917760
> [ 2.822722] pci_express 0000:00:1c.0:pcie00: allocate port service
> [ 2.822722] pci_express 0000:00:1c.0:pcie02: allocate port service
> [ 2.822722] pci_express 0000:00:1c.0:pcie03: allocate port service
> [ 2.822722] pcieport-driver 0000:03:00.0: setting latency timer to 64
> [ 2.822722] pci_express 0000:03:00.0:pcie11: allocate port service
> [ 2.822722] pcieport-driver 0000:04:00.0: setting latency timer to 64
> [ 2.822722] pcieport-driver 0000:04:00.0: found MSI capability
> [ 2.829140] found new irq_cfg for irq 4194560
> [ 2.829140] found new irq_desc for irq 4194560
> [ 2.829140] pci_express 0000:04:00.0:pcie21: allocate port service
> [ 2.829140] pcieport-driver 0000:04:02.0: setting latency timer to 64
> [ 2.829140] pcieport-driver 0000:04:02.0: found MSI capability
> [ 2.835337] found new irq_cfg for irq 4260096
> [ 2.835337] found new irq_desc for irq 4260096
> [ 2.835337] pci_express 0000:04:02.0:pcie21: allocate port service
> [ 2.835337] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
> [ 2.835337] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
> [ 2.837364] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
> [ 2.837924] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228)
> [ 2.846662] processor ACPI0007:00: registered as cooling_device0
> [ 2.849521] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 2.856998] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228)
> [ 2.870207] processor ACPI0007:01: registered as cooling_device1
> [ 2.871125] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 2.880402] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228)
> [ 2.890408] processor ACPI0007:02: registered as cooling_device2
> [ 2.892720] ACPI: Processor [CPU2] (supports 8 throttling states)
> [ 2.901088] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228)
> [ 2.911304] processor ACPI0007:03: registered as cooling_device3
> [ 2.917297] ACPI: Processor [CPU3] (supports 8 throttling states)
> [ 2.923619] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228)
> [ 2.937917] processor ACPI0007:04: registered as cooling_device4
> [ 2.939955] ACPI: Processor [CPU4] (supports 8 throttling states)
> [ 2.948396] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228)
> [ 2.958119] processor ACPI0007:05: registered as cooling_device5
> [ 2.961626] ACPI: Processor [CPU5] (supports 8 throttling states)
> [ 2.971364] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228)
> [ 2.983963] processor ACPI0007:06: registered as cooling_device6
> [ 2.983967] ACPI: Processor [CPU6] (supports 8 throttling states)
> [ 2.992445] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228)
> [ 3.003745] processor ACPI0007:07: registered as cooling_device7
> [ 3.008459] ACPI: Processor [CPU7] (supports 8 throttling states)
> [ 3.070637] Non-volatile memory driver v1.2
> [ 3.075359] intel_rng: FWH not detected
> [ 3.078812] Linux agpgart interface v0.103
> [ 3.084583] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
> [ 3.091250] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 3.097917] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 3.103398] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 3.109592] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 3.127501] FDC 0 is a post-1991 82077
> [ 3.136839] brd: module loaded
> [ 3.141461] loop: module loaded
> [ 3.143964] tun: Universal TUN/TAP device driver, 1.6
> [ 3.147985] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
> [ 3.156178] console [netcon0] enabled
> [ 3.159608] netconsole: network logging started
> [ 3.164325] Uniform Multi-Platform E-IDE driver
> [ 3.169522] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> [ 3.179678] Probing IDE interface ide0...
> [ 3.879494] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive
> [ 4.524564] Probing IDE interface ide1...
> [ 5.056668] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 5.060420] ide1 at 0x170-0x177,0x376 on irq 15
> [ 5.066634] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache
> [ 5.074600] Uniform CD-ROM driver Revision: 3.20
> [ 7.728124] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> [ 7.734949] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
> [ 7.742659] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
> [ 7.749038] Driver 'sd' needs updating - please use bus_type methods
> [ 7.755696] Driver 'sr' needs updating - please use bus_type methods
> [ 7.762300] ata_piix 0000:00:1f.1: version 2.12
> [ 7.762300] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 7.768982] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
> [ 7.776518] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16)
> [ 7.784758] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177]
> [ 7.792481] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16)
> [ 7.800724] ata_piix 0000:00:1f.1: no available native port
> [ 7.807931] Fusion MPT base driver 3.04.07
> [ 7.810977] Copyright (c) 1999-2008 LSI Corporation
> [ 7.815751] Fusion MPT SPI Host driver 3.04.07
> [ 7.821617] Fusion MPT SAS Host driver 3.04.07
> [ 7.826829] vendor=8086 device=244e
> [ 7.830165] found new irq_cfg for irq 17
> [ 7.830169] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17
> [ 7.830177] found new irq_desc for irq 17
> [ 7.830187] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 7.890637] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8]
> [ 7.909020] ieee1394: raw1394: /dev/raw1394 device initialized
> [ 7.914584] usbcore: registered new interface driver usblp
> [ 7.917907] Initializing USB Mass Storage driver...
> [ 7.924887] usbcore: registered new interface driver usb-storage
> [ 7.931126] USB Mass Storage support registered.
> [ 7.936947] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
> [ 7.946731] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 7.950619] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 7.957923] mice: PS/2 mouse device common for all mice
> [ 8.316658] md: linear personality registered for level -1
> [ 8.319171] md: raid0 personality registered for level 0
> [ 8.325837] md: raid1 personality registered for level 1
> [ 8.331336] md: raid10 personality registered for level 10
> [ 8.393333] raid6: int64x1 2954 MB/s
> [ 8.453333] raid6: int64x2 3541 MB/s
> [ 8.513333] raid6: int64x4 3431 MB/s
> [ 8.573333] raid6: int64x8 2300 MB/s
> [ 8.633333] raid6: sse2x1 3625 MB/s
> [ 8.693333] raid6: sse2x2 7342 MB/s
> [ 8.753534] raid6: sse2x4 8725 MB/s
> [ 8.756874] raid6: using algorithm sse2x4 (8725 MB/s)
> [ 8.760823] md: raid6 personality registered for level 6
> [ 8.769041] md: raid5 personality registered for level 5
> [ 8.774538] md: raid4 personality registered for level 4
> [ 8.777091] md: multipath personality registered for level -4
> [ 8.785215] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com
> [ 8.794213] cpuidle: using governor ladder
> [ 8.797563] cpuidle: using governor menu
> [ 8.801923] usbcore: registered new interface driver usbhid
> [ 8.807756] usbhid: v2.6:USB HID core driver
> [ 8.812469] oprofile: using NMI interrupt.
> [ 8.817063] TCP cubic registered
> [ 8.821255] NET: Registered protocol family 10
> [ 8.824775] IPv6 over IPv4 tunneling driver
> [ 8.831255] NET: Registered protocol family 17
> [ 8.835637] RPC: Registered udp transport module.
> [ 8.840903] RPC: Registered tcp transport module.
> [ 8.847922] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> [ 8.854088] Freeing unused kernel memory: 672k freed
> [ 8.857881] Write protecting the kernel read-only data: 5576k
> [ 9.091458] vendor=8086 device=4021
> [ 9.091458] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 9.091458] arcmsr 0000:01:00.0: setting latency timer to 64
> [ 9.104583] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31
> [ 9.116650] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
> [ 9.116657] Driver Version 1.20.00.15 2008/02/27
> [ 9.117082] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
> [ 9.116874] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
> [ 9.117707] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
> [ 9.118124] sd 0:0:0:0: [sda] Write Protect is off
> [ 9.118124] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
> [ 9.116668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 9.118124] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
> [ 9.118124] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
> [ 9.116874] sd 0:0:0:0: [sda] Write Protect is off
> [ 9.116874] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
> [ 9.118124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 9.118124] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8]
> [ 9.500831] sda1 sda2 sda3 sda4
> [ 9.503517] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 9.503517] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 9.504167] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
> [ 9.504583] scsi 0:0:16:0: Attached scsi generic sg1 type 3
> [ 9.572084] 3ware Storage Controller device driver for Linux v1.26.02.002.
> [ 9.583333] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
> [ 9.598220] Adaptec aacraid driver 1.1-5[2456]-ms
> [ 9.703333] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
> [ 9.706666] SGI XFS Quota Management subsystem
> [ 9.719602] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
> [ 9.719602] Copyright (c) 1999-2006 Intel Corporation.
> [ 13.929972] kjournald starting. Commit interval 5 seconds
> [ 13.929972] EXT3-fs: mounted filesystem with ordered data mode.
> [ 22.301270] found new irq_cfg for irq 19
> [ 22.301270] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19
> [ 22.301270] found new irq_desc for irq 19
> [ 22.301270] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 22.309893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
> [ 22.309893] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
> [ 22.309893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 22.314574] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
> [ 22.314574] e1000e: Copyright (c) 1999-2008 Intel Corporation.
> [ 22.314574] vendor=8086 device=3518
> [ 22.314574] vendor=8086 device=3500
> [ 22.314574] vendor=8086 device=4029
> [ 22.314574] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 22.314574] e1000e 0000:06:00.0: setting latency timer to 64
> [ 22.391040] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14
> [ 22.391040] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 22.391040] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
> [ 22.391040] vendor=8086 device=3518
> [ 22.391040] vendor=8086 device=3500
> [ 22.391040] vendor=8086 device=4029
> [ 22.391040] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 22.391040] e1000e 0000:06:00.1: setting latency timer to 64
> [ 22.464373] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15
> [ 22.464373] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
> [ 22.464373] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
> [ 23.297291] EXT3 FS on sda3, internal journal
> [ 23.463957] SMsC 37B787 watchdog component driver 1.1 initialising...
> [ 23.463957] smsc37b787_wdt: Unable to register miscdev on minor 130
> [ 23.840414] XFS mounting filesystem sda4
> [ 23.974769] Ending clean XFS mount for filesystem: sda4
> [ 24.050423] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k
> [ 27.870000] found new irq_cfg for irq 6291712
> [ 27.870000] found new irq_desc for irq 6291712
> [ 27.923748] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 30.684580] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
> [ 30.689997] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 41.540007] eth0: no IPv6 routers present
> [ 63.181453] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 63.196662] NFSD: starting 90-second grace period
> [ 157.601435] kjournald starting. Commit interval 5 seconds
> [ 157.599978] EXT3 FS on sda1, internal journal
> [ 157.599978] EXT3-fs: mounted filesystem with ordered data mode.
View attachment "2.6.27-rc4-tip-00862-gcc150c8-dirty.dmesg" of type "text/plain" (57784 bytes)
Powered by blists - more mailing lists