linux-kernel - Re: 2.6.27 mtrr fixes do not work when X starts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 22 Aug 2008 10:24:51 -0700
From:	"Yinghai Lu" <yhlu.kernel@...il.com>
To:	"Helge Hafting" <helge.hafting@...el.hist.no>
Cc:	"Alexander Huemer" <alexander.huemer@....ac.at>,
	"Pallipadi, Venkatesh" <venkatesh.pallipadi@...el.com>,
	"Rafael J. Wysocki" <rjw@...k.pl>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"Andi Kleen" <andi@...stfloor.org>
Subject: Re: 2.6.27 mtrr fixes do not work when X starts

On Fri, Aug 22, 2008 at 3:11 AM, Helge Hafting
<helge.hafting@...el.hist.no> wrote:
> I also see mtrr problems. I use 2.6.27-rc4, with this in my .config:
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> (Have no idea what the last one is about, the docs didn't say.)
>
> Everything is fine during boot, I see this in dmesg:
> Found optimal setting for mtrr clean up
> gran_size: 1M   chunk_size: 64M         num_reg: 7      lose RAM: 0M
> range0: 0000000000000000 - 000000007c000000
> Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB
> Setting variable MTRR 1, base: 1024MB, range: 512MB, type WB
> Setting variable MTRR 2, base: 1536MB, range: 256MB, type WB
> Setting variable MTRR 3, base: 1792MB, range: 128MB, type WB
> Setting variable MTRR 4, base: 1920MB, range: 64MB, type WB
> range: 000000007c000000 - 0000000080000000
> Setting variable MTRR 5, base: 1984MB, range: 64MB, type WB
> hole: 000000007ff00000 - 0000000080000000
> Setting variable MTRR 6, base: 2047MB, range: 1MB, type UC
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> After WB checking
> MTRR MAP PFN: 0000000000000000 - 0000000000080000
> After UC checking
> MTRR MAP PFN: 0000000000000000 - 000000000007ff00
> After sorting
> MTRR MAP PFN: 0000000000000000 - 000000000007ff00
>
> X gets problems however, from my Xorg.0.log:(II) VESA(0): initializing int10
> (II) VESA(0): Primary V_BIOS segment is: 0xc000
> (II) VESA(0): VESA BIOS detected
> (II) VESA(0): VESA VBE Version 3.0
> (II) VESA(0): VESA VBE Total Mem: 14336 kB
> (II) VESA(0): VESA VBE OEM: NVIDIA
> (II) VESA(0): VESA VBE OEM Software Rev: 96.134
> (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
> (II) VESA(0): VESA VBE OEM Product: G86 Board - dawson0
> (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev
> (II) VESA(0): Splitting WC range: base: 0xfb000000, size: 0xe00000
> (II) VESA(0): Splitting WC range: base: 0xfb800000, size: 0x600000
> (==) VESA(0): Write-combining range (0xfbc00000,0x200000)
> (WW) VESA(0): Failed to set up write-combining range (0xfb800000,0x600000)
> (WW) VESA(0): Failed to set up write-combining range (0xfb000000,0xe00000)
> (II) VESA(0): virtual address = 0x7f17bd6dd000,
>        physical address = 0xfb000000, size = 14680064
>
> And dmesg says:
> mtrr: no more MTRRs available
> mtrr: no more MTRRs available
>
> So I get one write-combining range where X wants three.
> $ cat /proc/mtrr
> reg00: base=0x00000000 (   0MB), size=1024MB: write-back, count=1
> reg01: base=0x40000000 (1024MB), size= 512MB: write-back, count=1
> reg02: base=0x60000000 (1536MB), size= 256MB: write-back, count=1
> reg03: base=0x70000000 (1792MB), size= 128MB: write-back, count=1
> reg04: base=0x78000000 (1920MB), size=  64MB: write-back, count=1
> reg05: base=0x7c000000 (1984MB), size=  64MB: write-back, count=1
> reg06: base=0x7ff00000 (2047MB), size=   1MB: uncachable, count=1
> reg07: base=0xfbc00000 (4028MB), size=   2MB: write-combining, count=1
>
> 2MB does obviously not cover the entire framebuffer. :-(
>
please boot with "mtrr_spare_reg_nr=3 debug"

YH
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/