| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 23 Aug 2008 13:10:41 -0700
From: "Yinghai Lu" <yhlu.kernel@...il.com>
To: "Rufus & Azrael" <rufus-azrael@...ericable.fr>
Cc: "Linux-kernel Mailing List" <linux-kernel@...r.kernel.org>,
"Yinghai Lu" <yhlu.kenrel@...il.com>,
"Ingo Molnar" <mingo@...e.hu>,
"David Witbrodt" <dawitbro@...global.net>
Subject: Re: HPET regression in 2.6.26 versus 2.6.25 -- found another user with the same regression
On Sat, Aug 23, 2008 at 12:40 PM, Rufus & Azrael
<rufus-azrael@...ericable.fr> wrote:
> Yinghai Lu wrote:
>>
>> On Sat, Aug 23, 2008 at 11:26 AM, Rufus& Azrael
>> <rufus-azrael@...ericable.fr> wrote:
>>
>>>>
>>>> On Sat, Aug 23, 2008 at 4:58 AM, David Witbrodt<dawitbro@...global.net>
>>>> wrote:
>>>>
>>>>>
>>>>>
>>>>>>
>>>>>> please send out after booting with hpet=disable
>>>>>> lspci -tv
>>>>>> lspci -vvxxx
>>>>>>
>>>>>
>>>>> Info attached:
>>>>>
>>>>
>>>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
>>>> Subsystem: Elitegroup Computer Systems Device 2621
>>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
>>>> <TAbort-<MAbort->SERR-<PERR- INTx-
>>>> Region 0: I/O ports at fa00 [size=16]
>>>> Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
>>>> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>>>> Kernel driver in use: piix4_smbus
>>>> 00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
>>>> 10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
>>>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>>> 40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
>>>> 50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
>>>> 60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
>>>> 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
>>>> 80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
>>>> 90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
>>>> a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
>>>> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
>>>> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
>>>> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
>>>> it seems kernel update BAR1 from 0xfed00000 to 0x80000000 after it can
>>>> not give 0xfed00000 to that device.
>>>> please try attached patch, and send out lspci -vvxxxx again.
>>>> YH
>>>> [PATCH] x86: protect hpet in BAR for one ATI chipset
>>>>
>>>> so avoid kernel don't allocate nre resource for it because it can not
>>>> allocate the old
>>>> address from BIOS.
>>>>
>>>> the same way like some IO APIC address in BAR handling
>>>>
>>>> Signed-off-by: Yinghai Lu<yhlu.kenrel@...il.com>
>>>>
>>>> ---
>>>> drivers/pci/quirks.c | 16 ++++++++++++++++
>>>> 1 file changed, 16 insertions(+)
>>>> Index: linux-2.6/drivers/pci/quirks.c
>>>> ===================================================================
>>>> --- linux-2.6.orig/drivers/pci/quirks.c
>>>> +++ linux-2.6/drivers/pci/quirks.c
>>>> @@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_B
>>>> PCI_DEVICE_ID_NX2_5709S,
>>>> quirk_brcm_570x_limit_vpd);
>>>>
>>>> +static void __init quirk_hpet_in_bar(struct pci_dev *pdev)
>>>> +{
>>>> + int i;
>>>> + unsigned int base, size;
>>>> +
>>>> + /* the BAR1 is the location of the HPET...we must
>>>> + * not touch this, so forcibly insert it into the resource tree
>>>> */
>>>> + base = pci_resource_start(pdev, 1);
>>>> + size = pci_resource_len(pdev, 1);
>>>> + if (base&& size) {
>>>> + insert_resource(&iomem_resource,&pdev->resource[1]);
>>>> + dev_info(&dev->dev, "HPET at %04x-%04x\n", name, base,
>>>> base + size - 1);
>>>> + }
>>>> +}
>>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485, quirk_hpet_in_bar);
>>>> +
>>>> #ifdef CONFIG_PCI_MSI
>>>> /* Some chipsets do not support MSI. We cannot easily rely on setting
>>>> * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
>>>>
>>>
>>> Hi Yinghai,
>>>
>>>
>>> Your patch seems to be broken, see :
>>>
>>>
>>>>
>>>> CC drivers/pci/quirks.o
>>>> drivers/pci/quirks.c: In function 'quirk_hpet_in_bar':
>>>> drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this
>>>> function)
>>>> drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is
>>>> reported
>>>> only once
>>>> drivers/pci/quirks.c:1804: erreur: for each function it appears in.)
>>>> drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in this
>>>> function)
>>>> drivers/pci/quirks.c:1804: attention : trop d'arguments pour le format
>>>> drivers/pci/quirks.c:1795: attention : unused variable 'i'
>>>> make[2]: *** [drivers/pci/quirks.o] Erreur 1
>>>>
>>
>> please check v2.
>>
>> YH
>>
>
> Thanks Yinghai,
>
> Your patch applied, I attach lspci -vvxxxx.
>
> Regards.
>
>
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
> Subsystem: Micro-Star International Co., Ltd. Device 7327
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Region 0: I/O ports at 0b00 [size=16]
> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
> Kernel driver in use: piix4_smbus
> 00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
> 10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
> 40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
> 50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
> 60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
> 70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0f
> 80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
> 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
> a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
bios didn't set HPET in BAR1?
YH
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists