| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <48B07409.60905@numericable.fr>
Date: Sat, 23 Aug 2008 22:33:13 +0200
From: Rufus & Azrael <rufus-azrael@...ericable.fr>
To: Yinghai Lu <yhlu.kernel@...il.com>
CC: Linux-kernel Mailing List <linux-kernel@...r.kernel.org>,
Ingo Molnar <mingo@...e.hu>,
David Witbrodt <dawitbro@...global.net>
Subject: Re: HPET regression in 2.6.26 versus 2.6.25 -- found another user
with the same regression
Yinghai Lu wrote:
> On Sat, Aug 23, 2008 at 1:15 PM, Rufus& Azrael
> <rufus-azrael@...ericable.fr> wrote:
>
>> Yinghai Lu wrote:
>>
>>> On Sat, Aug 23, 2008 at 12:40 PM, Rufus& Azrael
>>> <rufus-azrael@...ericable.fr> wrote:
>>>
>>>
>>>> Yinghai Lu wrote:
>>>>
>>>>
>>>>> On Sat, Aug 23, 2008 at 11:26 AM, Rufus& Azrael
>>>>> <rufus-azrael@...ericable.fr> wrote:
>>>>>
>>>>>
>>>>>
>>>>>>> On Sat, Aug 23, 2008 at 4:58 AM, David
>>>>>>> Witbrodt<dawitbro@...global.net>
>>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>> please send out after booting with hpet=disable
>>>>>>>>> lspci -tv
>>>>>>>>> lspci -vvxxx
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Info attached:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
>>>>>>> Subsystem: Elitegroup Computer Systems Device 2621
>>>>>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>>>>>>> ParErr-
>>>>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
>>>>>>> <TAbort-<MAbort->SERR-<PERR- INTx-
>>>>>>> Region 0: I/O ports at fa00 [size=16]
>>>>>>> Region 1: Memory at 80000000 (32-bit, non-prefetchable)
>>>>>>> [size=1K]
>>>>>>> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>>>>>>> Kernel driver in use: piix4_smbus
>>>>>>> 00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
>>>>>>> 10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
>>>>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
>>>>>>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>>>>>> 40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
>>>>>>> 50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
>>>>>>> 60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
>>>>>>> 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
>>>>>>> 80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
>>>>>>> 90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
>>>>>>> a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
>>>>>>> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
>>>>>>> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>>> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>>> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>>> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
>>>>>>> it seems kernel update BAR1 from 0xfed00000 to 0x80000000 after it can
>>>>>>> not give 0xfed00000 to that device.
>>>>>>> please try attached patch, and send out lspci -vvxxxx again.
>>>>>>> YH
>>>>>>> [PATCH] x86: protect hpet in BAR for one ATI chipset
>>>>>>>
>>>>>>> so avoid kernel don't allocate nre resource for it because it can not
>>>>>>> allocate the old
>>>>>>> address from BIOS.
>>>>>>>
>>>>>>> the same way like some IO APIC address in BAR handling
>>>>>>>
>>>>>>> Signed-off-by: Yinghai Lu<yhlu.kenrel@...il.com>
>>>>>>>
>>>>>>> ---
>>>>>>> drivers/pci/quirks.c | 16 ++++++++++++++++
>>>>>>> 1 file changed, 16 insertions(+)
>>>>>>> Index: linux-2.6/drivers/pci/quirks.c
>>>>>>> ===================================================================
>>>>>>> --- linux-2.6.orig/drivers/pci/quirks.c
>>>>>>> +++ linux-2.6/drivers/pci/quirks.c
>>>>>>> @@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_B
>>>>>>> PCI_DEVICE_ID_NX2_5709S,
>>>>>>> quirk_brcm_570x_limit_vpd);
>>>>>>>
>>>>>>> +static void __init quirk_hpet_in_bar(struct pci_dev *pdev)
>>>>>>> +{
>>>>>>> + int i;
>>>>>>> + unsigned int base, size;
>>>>>>> +
>>>>>>> + /* the BAR1 is the location of the HPET...we must
>>>>>>> + * not touch this, so forcibly insert it into the resource
>>>>>>> tree
>>>>>>> */
>>>>>>> + base = pci_resource_start(pdev, 1);
>>>>>>> + size = pci_resource_len(pdev, 1);
>>>>>>> + if (base&& size) {
>>>>>>> + insert_resource(&iomem_resource,&pdev->resource[1]);
>>>>>>> + dev_info(&dev->dev, "HPET at %04x-%04x\n", name, base,
>>>>>>> base + size - 1);
>>>>>>> + }
>>>>>>> +}
>>>>>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485,
>>>>>>> quirk_hpet_in_bar);
>>>>>>> +
>>>>>>> #ifdef CONFIG_PCI_MSI
>>>>>>> /* Some chipsets do not support MSI. We cannot easily rely on setting
>>>>>>> * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Hi Yinghai,
>>>>>>
>>>>>>
>>>>>> Your patch seems to be broken, see :
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> CC drivers/pci/quirks.o
>>>>>>> drivers/pci/quirks.c: In function 'quirk_hpet_in_bar':
>>>>>>> drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this
>>>>>>> function)
>>>>>>> drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is
>>>>>>> reported
>>>>>>> only once
>>>>>>> drivers/pci/quirks.c:1804: erreur: for each function it appears in.)
>>>>>>> drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in
>>>>>>> this
>>>>>>> function)
>>>>>>> drivers/pci/quirks.c:1804: attention : trop d'arguments pour le format
>>>>>>> drivers/pci/quirks.c:1795: attention : unused variable 'i'
>>>>>>> make[2]: *** [drivers/pci/quirks.o] Erreur 1
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> please check v2.
>>>>>
>>>>> YH
>>>>>
>>>>>
>>>>>
>>>> Thanks Yinghai,
>>>>
>>>> Your patch applied, I attach lspci -vvxxxx.
>>>>
>>>> Regards.
>>>>
>>>>
>>>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
>>>> Subsystem: Micro-Star International Co., Ltd. Device 7327
>>>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx+
>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
>>>> <TAbort-<MAbort->SERR-<PERR- INTx-
>>>> Region 0: I/O ports at 0b00 [size=16]
>>>> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>>>> Kernel driver in use: piix4_smbus
>>>> 00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
>>>> 10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
>>>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>>> 40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
>>>> 50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
>>>> 60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
>>>> 70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0f
>>>> 80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
>>>> 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
>>>> a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
>>>> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
>>>> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
>>>> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
>>>>
>>>>
>>> bios didn't set HPET in BAR1?
>>>
>>> YH
>>>
>>>
>>>
>> Yinghai,
>>
>> How do I check this ?
>>
>>
>
> it seems that you BIOS have HPET in acpi tables, but didn't set that
> in BAR1 of 00:14.0
>
> or BIOS have set one magic bit to hide BAR1 to OS.
>
> please check if your hpet works. if so, we could have other quirks to
> hide BAR1 for David's system.
>
> YH
>
>
Yinghai,
I found these lines in dmesg :
> [ 0.145977] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.145977] hpet0: 4 32-bit timers, 14318180 Hz
do you think hpet works ?
Regards.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists