[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.27-rc4-tip-00345-g8c8b7ed (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Mon Aug 25 10:36:23 HST 2008 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable) [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up. [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff00000 page 4k [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000 [ 0.000000] last_map_addr: cff00000 end: cff00000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0430000000 page 2M [ 0.000000] kernel direct mapping tables up to 430000000 @ c000-1e000 [ 0.000000] last_map_addr: 430000000 end: 430000000 [ 0.000000] RAMDISK: 37e10000 - 37fef782 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS CFF0AFC0, 0040 [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1) [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000430000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000430000000 [ 0.000000] NODE_DATA [0000000000019000 - 0000000000023fff] [ 0.000000] bootmap [0000000000100000 - 0000000000185fff] pages 86 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0430000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00009bfef0] TEXT DATA BSS ==> [0000200000 - 00009bfef0] [ 0.000000] #3 [0037e10000 - 0037fef782] RAMDISK ==> [0037e10000 - 0037fef782] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 0000019000] PGTABLE ==> [000000c000 - 0000019000] [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050 [ 0.000000] [ffffe20000000000-ffffe200107fffff] PMD -> [ffff880028200000-ffff880037dfffff] on node 0 [ 0.000000] [ffffe20010800000-ffffe20010bfffff] PMD -> [ffff880038000000-ffff8800383fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00430000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff00 [ 0.000000] 0: 0x00100000 -> 0x00430000 [ 0.000000] On node 0 totalpages: 4193950 [ 0.000000] DMA zone: 1832 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 831296 pages, LIFO batch:31 [ 0.000000] Normal zone: 3290112 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000 [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000 [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000cff0a000 [ 0.000000] PM: Registered nosave memory: 00000000cff0a000 - 00000000cff0b000 [ 0.000000] PM: Registered nosave memory: 00000000cff0b000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x30 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x100 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x4000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x418 ==> [0x28034000 - 0x28035000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x28035000 - 0x28035600] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x28036000 - 0x28038000] [ 0.000000] kstat_irqs ==> [0x28038000 - 0x28038400] [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000028039000 [ 0.000000] per cpu data for cpu1 on node0 at 0000000028045000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000028051000 [ 0.000000] per cpu data for cpu3 on node0 at 000000002805d000 [ 0.000000] per cpu data for cpu4 on node0 at 0000000028069000 [ 0.000000] per cpu data for cpu5 on node0 at 0000000028075000 [ 0.000000] per cpu data for cpu6 on node0 at 0000000028081000 [ 0.000000] per cpu data for cpu7 on node0 at 000000002808d000 [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4123240 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3192.010 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.003333] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.003333] Memory: 16436776k/17563648k available (3831k kernel code, 339024k reserved, 2175k data, 676k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640033) [ 0.010017] Security Framework initialized [ 0.016879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.027256] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.034238] Mount-cache hash table entries: 256 [ 0.036819] Initializing cgroup subsys ns [ 0.040003] Initializing cgroup subsys cpuacct [ 0.043333] Initializing cgroup subsys memory [ 0.046668] Initializing cgroup subsys devices [ 0.050006] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.055184] CPU: L2 cache: 6144K [ 0.056665] CPU 0/0 -> Node 0 [ 0.059998] CPU: Physical Processor ID: 0 [ 0.063330] CPU: Processor Core ID: 0 [ 0.066667] CPU0: Thermal monitoring enabled (TM2) [ 0.069997] using mwait in idle threads. [ 0.073345] ACPI: Core revision 20080609 [ 0.083380] Setting APIC routing to flat [ 0.090076] 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.090081] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.090083] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.090086] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.090089] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.090091] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.090093] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.090096] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.090098] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.090101] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.090104] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.090106] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.090109] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.090111] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.090114] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.090247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.129455] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.136658] MSR00000000: 00000000cff69380 [ 0.139991] MSR00000001: 0000000000000000 [ 0.143327] MSR00000006: 0000000000000040 [ 0.146661] MSR00000010: 00000041ff91fb10 [ 0.149993] MSR00000017: 0018000088e40822 [ 0.153325] MSR0000001b: 00000000fee00900 [ 0.156659] MSR00000021: 0000000000000001 [ 0.159993] MSR0000002a: 00000000c208149e [ 0.163326] MSR00000032: 0000000000000000 [ 0.166656] MSR00000033: 0000000000000000 [ 0.169991] MSR00000039: 0000000000000000 [ 0.173322] MSR0000003a: 000000000000000d [ 0.176657] MSR0000003f: 0000000000000000 [ 0.179989] MSR00000040: ffffffff805af2f3 [ 0.183322] MSR00000041: ffffffff8020c348 [ 0.186655] MSR00000042: ffffffff802380fc [ 0.189988] MSR00000043: ffffffff8020c348 [ 0.193332] MSR00000060: ffffffff805af2cc [ 0.196654] MSR00000061: ffffffff802380eb [ 0.199987] MSR00000062: ffffffff805af2c1 [ 0.203320] MSR00000063: ffffffff802380eb [ 0.206668] MSR0000008b: 0000060600000000 [ 0.209992] MSR0000009b: 0000000000000000 [ 0.213321] MSR000000a0: 00000000cff80000 [ 0.216653] MSR000000a1: 00000000fff80800 [ 0.219989] MSR000000a8: 000000000000061a [ 0.223319] MSR000000a9: 000000000000061a [ 0.226652] MSR000000aa: 000000000000061a [ 0.229985] MSR000000ab: 000000000000061a [ 0.233318] MSR000000ac: 000000000000061a [ 0.236652] MSR000000ad: 000000000000061a [ 0.239992] MSR000000c1: 0000000000000000 [ 0.243318] MSR000000c2: 0000000000000000 [ 0.246653] MSR000000c7: 130000004c000000 [ 0.249986] MSR000000cd: 0000000000000806 [ 0.253317] MSR000000ce: 001a08227f7f071a [ 0.256650] MSR000000cf: 0000000000000000 [ 0.259990] MSR000000e0: 00000000018bc0f0 [ 0.263316] MSR000000e1: 00000000f0f00000 [ 0.266650] MSR000000e2: 0000000002262201 [ 0.269983] MSR000000e3: 0000000000000000 [ 0.273316] MSR000000e4: 0000000000000000 [ 0.276649] MSR000000e5: 00000000d00208c8 [ 0.279982] MSR000000e7: 000000421f188350 [ 0.283315] MSR000000e8: 000000421fe966d0 [ 0.286650] MSR000000ee: 04000000877d4b01 [ 0.289987] MSR000000fe: 0000000000000d07 [ 0.293323] MSR00000116: 0000000000003fc0 [ 0.296648] MSR00000118: 00000000000bfffd [ 0.299982] MSR0000011b: 0000000000000000 [ 0.303314] MSR0000011c: 00000000e000000c [ 0.306647] MSR0000011e: 00000000be702111 [ 0.309998] MSR0000014e: 000000006fe76e2f [ 0.313313] MSR0000014f: 00000000f7bef7ff [ 0.316647] MSR00000151: 00000000ad123a00 [ 0.319984] MSR0000015e: 0000000000000006 [ 0.323313] MSR0000015f: 00000000001c0822 [ 0.326653] MSR00000174: 0000000000000010 [ 0.329979] MSR00000175: 0000000000000000 [ 0.333312] MSR00000176: ffffffff80228960 [ 0.336646] MSR00000179: 0000000000000806 [ 0.339978] MSR0000017a: 0000000000000000 [ 0.343315] MSR00000186: 0000000000000000 [ 0.346644] MSR00000187: 0000000000000000 [ 0.349982] MSR00000193: 0000000000000000 [ 0.353311] MSR00000194: 0000000000000522 [ 0.356645] MSR00000198: 0822082206000822 [ 0.359977] MSR00000199: 0000000000000822 [ 0.363310] MSR0000019a: 0000000000000002 [ 0.366643] MSR0000019b: 0000000000000003 [ 0.369976] MSR0000019c: 00000000882a0000 [ 0.373309] MSR0000019d: 000000000000061a [ 0.376642] MSR0000019e: 0000000006010000 [ 0.379976] MSR0000019f: 0000000000000000 [ 0.383309] MSR000001a0: 00000060669d2489 [ 0.386642] MSR000001a1: 0000000000000000 [ 0.389975] MSR000001a2: 0000000000001000 [ 0.393311] MSR000001aa: 00000000fe7f042f [ 0.396649] MSR000001bf: 0000000000000404 [ 0.399978] MSR000001c9: 0000000000000002 [ 0.403311] MSR000001d3: 0000000000008000 [ 0.406642] MSR000001d9: 0000000000000001 [ 0.409974] MSR000001db: ffffffff805af2f3 [ 0.413307] MSR000001dc: ffffffff805af2c1 [ 0.416640] MSR000001dd: ffffffff802380ca [ 0.419973] MSR000001de: ffffffff802380e6 [ 0.423306] MSR000001e0: 0000000000000ff0 [ 0.426648] MSR000001f8: 0000000000000001 [ 0.429972] MSR000001f9: 0000000000000001 [ 0.433305] MSR000001fa: 0000000000008c89 [ 0.436640] MSR00000200: 00000000d0000000 [ 0.439972] MSR00000201: 0000000ff0000800 [ 0.443305] MSR00000202: 00000000e0000000 [ 0.446638] MSR00000203: 0000000fe0000800 [ 0.449971] MSR00000204: 0000000000000006 [ 0.453304] MSR00000205: 0000000c00000800 [ 0.456637] MSR00000206: 0000000400000006 [ 0.459970] MSR00000207: 0000000fe0000800 [ 0.463303] MSR00000208: 0000000420000006 [ 0.466637] MSR00000209: 0000000ff0000800 [ 0.469970] MSR0000020a: 0000000000000000 [ 0.473303] MSR0000020b: 0000000000000000 [ 0.476636] MSR0000020c: 0000000000000000 [ 0.479969] MSR0000020d: 0000000000000000 [ 0.483328] MSR00000250: 0606060606060606 [ 0.486638] MSR00000258: 0606060606060606 [ 0.489968] MSR00000259: 0000000000000000 [ 0.493307] MSR00000268: 0505050505050505 [ 0.496635] MSR00000269: 0505050505050505 [ 0.499968] MSR0000026a: 0000000000000000 [ 0.503301] MSR0000026b: 0000000000000000 [ 0.506634] MSR0000026c: 0505050505050505 [ 0.509968] MSR0000026d: 0505050505050505 [ 0.513301] MSR0000026e: 0505050505050505 [ 0.516634] MSR0000026f: 0505050505050505 [ 0.519970] MSR00000277: 0007010600070106 [ 0.523353] MSR000002ff: 0000000000000c00 [ 0.526638] MSR00000309: 0000000000000000 [ 0.529968] MSR0000030a: 0000000000000000 [ 0.533301] MSR0000030b: 0000000000000000 [ 0.536656] MSR00000345: 00000000000010c2 [ 0.539995] MSR0000038d: 0000000000000000 [ 0.543301] MSR0000038e: 0000000000000000 [ 0.546634] MSR0000038f: ffffffffffffffff [ 0.549968] MSR00000390: ffffffffffffffff [ 0.553338] MSR000003f1: 0000000000000000 [ 0.556640] MSR00000400: 00000000c208149e [ 0.559968] MSR00000401: 1000000000000000 [ 0.563301] MSR00000402: 0000000000000000 [ 0.566635] MSR00000404: 0000000000000001 [ 0.569968] MSR00000405: 0000000000000000 [ 0.573301] MSR00000406: 000002a9000002a9 [ 0.576635] MSR00000408: 0000000000000001 [ 0.579968] MSR00000409: 0000000000000000 [ 0.583301] MSR0000040a: 000002a9000002a9 [ 0.586635] MSR0000040c: 0000000000000001 [ 0.589968] MSR0000040d: 0020000000000000 [ 0.593301] MSR0000040e: 00000080608ad188 [ 0.596635] MSR00000410: 0000000000000008 [ 0.599968] MSR00000411: 0000000000000011 [ 0.603302] MSR00000414: 0000000000000001 [ 0.606634] MSR00000415: 1000001004000e0f [ 0.610018] MSRc0000080: 0000000000000d01 [ 0.613301] MSRc0000081: 0023001000000000 [ 0.616634] MSRc0000082: ffffffff8020bce0 [ 0.619968] MSRc0000083: ffffffff80228b70 [ 0.623301] MSRc0000084: 0000000000003700 [ 0.626681] MSRc0000100: 0000000000000000 [ 0.629968] MSRc0000101: ffffffff807e6c00 [ 0.633301] MSRc0000102: 0000000000000000 [ 0.643300] Booting processor 1/4 ip 6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6386.64 BogoMIPS (lpj=10639430) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 1/4 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 0 [ 0.003333] CPU1: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.738103] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.744732] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.746689] Booting processor 2/1 ip 6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6386.61 BogoMIPS (lpj=10639385) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 2/1 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU2: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.844800] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.851400] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.853400] Booting processor 3/5 ip 6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6386.62 BogoMIPS (lpj=10639401) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 3/5 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU3: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.951441] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 0.958064] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.960026] Booting processor 4/2 ip 6000 [ 0.003333] Initializing CPU#4 [ 0.003333] Calibrating delay using timer specific routine.. 6386.60 BogoMIPS (lpj=10639363) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 4/2 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] CPU4: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 1.058128] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.064733] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 1.066687] Booting processor 5/6 ip 6000 [ 0.003333] Initializing CPU#5 [ 0.003333] Calibrating delay using timer specific routine.. 6386.60 BogoMIPS (lpj=10639368) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 5/6 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] CPU5: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 1.164844] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.171401] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 1.173351] Booting processor 6/3 ip 6000 [ 0.003333] Initializing CPU#6 [ 0.003333] Calibrating delay using timer specific routine.. 6386.61 BogoMIPS (lpj=10639379) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 6/3 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] CPU6: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 1.271472] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.279979] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 1.286686] Booting processor 7/7 ip 6000 [ 0.003333] Initializing CPU#7 [ 0.003333] Calibrating delay using timer specific routine.. 6386.62 BogoMIPS (lpj=10639406) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 6144K [ 0.003333] CPU 7/7 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 1 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] CPU7: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 1.384776] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06 [ 1.391399] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 1.393308] Brought up 8 CPUs [ 1.396635] Total of 8 processors activated (51089.35 BogoMIPS). [ 1.400602] net_namespace: 864 bytes [ 1.403457] xor: automatically using best checksumming function: generic_sse [ 1.423301] generic_sse: 11871.600 MB/sec [ 1.426634] xor: using function: generic_sse (11871.600 MB/sec) [ 1.429997] NET: Registered protocol family 16 [ 1.433531] No dock devices found. [ 1.436849] ACPI: bus type pci registered [ 1.440110] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8 [ 1.443302] PCI: MCFG area at e0000000 reserved in E820 [ 1.446821] PCI: Using MMCONFIG at e0000000 - e08fffff [ 1.449968] PCI: Using configuration type 1 for base access [ 1.458449] ACPI: EC: Look up EC in DSDT [ 1.460268] ACPI: Interpreter enabled [ 1.463302] ACPI: (supports S0 S3 S4 S5) [ 1.468074] ACPI: Using IOAPIC for interrupt routing [ 1.475012] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.476744] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.479969] pci 0000:00:00.0: PME# disabled [ 1.483323] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.486635] pci 0000:00:01.0: PME# disabled [ 1.489991] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.493302] pci 0000:00:05.0: PME# disabled [ 1.496658] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.499969] pci 0000:00:09.0: PME# disabled [ 1.503525] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.506636] pci 0000:00:1b.0: PME# disabled [ 1.510005] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.513303] pci 0000:00:1c.0: PME# disabled [ 1.516837] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.519970] pci 0000:00:1d.7: PME# disabled [ 1.523376] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 1.523526] pci 0000:01:00.0: supports D1 [ 1.523550] PCI: bridge 0000:00:01.0 32bit mmio: [dc100000, dc1fffff] [ 1.526695] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.529969] pci 0000:03:00.0: PME# disabled [ 1.533335] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 1.536636] pci 0000:03:00.3: PME# disabled [ 1.539993] PCI: bridge 0000:00:09.0 io port: [2000, 2fff] [ 1.543302] PCI: bridge 0000:00:09.0 32bit mmio: [dc200000, dc3fffff] [ 1.546674] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.549969] pci 0000:04:00.0: PME# disabled [ 1.553333] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 1.556636] pci 0000:04:02.0: PME# disabled [ 1.559987] PCI: bridge 0000:03:00.0 io port: [2000, 2fff] [ 1.563302] PCI: bridge 0000:03:00.0 32bit mmio: [dc200000, dc2fffff] [ 1.566736] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.569970] pci 0000:06:00.0: PME# disabled [ 1.573370] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold [ 1.576636] pci 0000:06:00.1: PME# disabled [ 1.579995] PCI: bridge 0000:04:02.0 io port: [2000, 2fff] [ 1.583302] PCI: bridge 0000:04:02.0 32bit mmio: [dc200000, dc2fffff] [ 1.586779] pci 0000:09:05.0: supports D1 [ 1.586780] pci 0000:09:05.0: supports D2 [ 1.586839] pci 0000:09:06.0: supports D2 [ 1.586840] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold [ 1.589970] pci 0000:09:06.0: PME# disabled [ 1.593327] pci 0000:00:1e.0: transparent bridge [ 1.596644] PCI: bridge 0000:00:1e.0 io port: [3000, 3fff] [ 1.599969] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] [ 1.603304] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dbffffff] [ 1.606649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.607085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.607173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 1.607254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.609973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT] [ 1.610147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT] [ 1.610229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT] [ 1.610311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT] [ 1.610438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.610530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.619795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 1.623888] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.631510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.639519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 1.643883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 1.651512] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15) [ 1.659053] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15) [ 1.663358] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9 [ 1.671379] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.673363] pnp: PnP ACPI init [ 1.676638] ACPI: bus type pnp registered [ 1.684675] pnp: PnP ACPI: found 11 devices [ 1.686635] ACPI: ACPI bus type pnp unregistered [ 1.690226] SCSI subsystem initialized [ 1.693560] libata version 3.00 loaded. [ 1.693878] usbcore: registered new interface driver usbfs [ 1.696702] usbcore: registered new interface driver hub [ 1.700059] usbcore: registered new device driver usb [ 1.703709] PCI: Using ACPI for IRQ routing [ 1.723323] PCI-GART: No AMD northbridge found. [ 1.726732] hpet clockevent registered [ 1.726735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.733301] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.739991] ACPI: RTC can wake from S4 [ 1.752137] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.758702] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.765260] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.771994] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 1.778731] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 1.785460] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.793294] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 1.801126] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.808961] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.816288] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved [ 1.823621] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved [ 1.830953] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved [ 1.839316] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.845445] pci 0000:00:01.0: IO window: disabled [ 1.850520] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff [ 1.856816] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 1.864732] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 1.870855] pci 0000:00:05.0: IO window: disabled [ 1.875931] pci 0000:00:05.0: MEM window: disabled [ 1.881096] pci 0000:00:05.0: PREFETCH window: disabled [ 1.886696] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 1.892815] pci 0000:04:00.0: IO window: disabled [ 1.897892] pci 0000:04:00.0: MEM window: disabled [ 1.903058] pci 0000:04:00.0: PREFETCH window: disabled [ 1.908667] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 1.914787] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 1.920296] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff [ 1.926590] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.934508] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 1.941128] pci 0000:03:00.0: IO window: 0x2000-0x2fff [ 1.946634] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff [ 1.952928] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 1.960845] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07 [ 1.966966] pci 0000:03:00.3: IO window: disabled [ 1.972055] pci 0000:03:00.3: MEM window: disabled [ 1.977218] pci 0000:03:00.3: PREFETCH window: disabled [ 1.982814] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 1.988938] pci 0000:00:09.0: IO window: 0x2000-0x2fff [ 1.994447] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff [ 2.000745] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff [ 2.008670] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 2.014789] pci 0000:00:1c.0: IO window: disabled [ 2.019866] pci 0000:00:1c.0: MEM window: disabled [ 2.025029] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.030622] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 2.036743] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 2.042263] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff [ 2.048555] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff [ 2.056478] found new irq_cfg for irq 16 [ 2.056479] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 2.056482] found new irq_desc for irq 16 [ 2.056484] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.063384] pci 0000:00:01.0: setting latency timer to 64 [ 2.063387] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.070283] pci 0000:00:05.0: setting latency timer to 64 [ 2.070286] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.077180] pci 0000:00:09.0: setting latency timer to 64 [ 2.077185] vendor=8086 device=4029 [ 2.080865] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.087764] pci 0000:03:00.0: setting latency timer to 64 [ 2.087768] vendor=8086 device=3500 [ 2.091456] vendor=8086 device=4029 [ 2.095138] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.102047] pci 0000:04:00.0: setting latency timer to 64 [ 2.102051] vendor=8086 device=3500 [ 2.105749] vendor=8086 device=4029 [ 2.109430] found new irq_cfg for irq 18 [ 2.109431] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 2.109434] found new irq_desc for irq 18 [ 2.109436] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.116340] pci 0000:04:02.0: setting latency timer to 64 [ 2.116345] pci 0000:03:00.3: setting latency timer to 64 [ 2.116349] found new irq_cfg for irq 21 [ 2.116350] 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 [ 2.116352] found new irq_desc for irq 21 [ 2.116353] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.123255] pci 0000:00:1c.0: setting latency timer to 64 [ 2.123259] pci 0000:00:1e.0: setting latency timer to 64 [ 2.123261] bus: 00 index 0 io port: [0, ffff] [ 2.127903] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 2.133331] bus: 01 index 0 mmio: [0, 0] [ 2.137454] bus: 01 index 1 mmio: [dc100000, dc1fffff] [ 2.142784] bus: 01 index 2 mmio: [d1000000, d10fffff] [ 2.148123] bus: 01 index 3 mmio: [0, 0] [ 2.152256] bus: 02 index 0 mmio: [0, 0] [ 2.156372] bus: 02 index 1 mmio: [0, 0] [ 2.160487] bus: 02 index 2 mmio: [0, 0] [ 2.164604] bus: 02 index 3 mmio: [0, 0] [ 2.168727] bus: 03 index 0 io port: [2000, 2fff] [ 2.173628] bus: 03 index 1 mmio: [dc200000, dc3fffff] [ 2.178968] bus: 03 index 2 mmio: [d1100000, d11fffff] [ 2.184307] bus: 03 index 3 mmio: [0, 0] [ 2.188429] bus: 04 index 0 io port: [2000, 2fff] [ 2.193329] bus: 04 index 1 mmio: [dc200000, dc2fffff] [ 2.199107] bus: 04 index 2 mmio: [d1100000, d11fffff] [ 2.204438] bus: 04 index 3 mmio: [0, 0] [ 2.208552] bus: 05 index 0 mmio: [0, 0] [ 2.216825] bus: 05 index 1 mmio: [0, 0] [ 2.220945] bus: 05 index 2 mmio: [0, 0] [ 2.225060] bus: 05 index 3 mmio: [0, 0] [ 2.229180] bus: 06 index 0 io port: [2000, 2fff] [ 2.234078] bus: 06 index 1 mmio: [dc200000, dc2fffff] [ 2.239404] bus: 06 index 2 mmio: [d1100000, d11fffff] [ 2.244739] bus: 06 index 3 mmio: [0, 0] [ 2.248859] bus: 07 index 0 mmio: [0, 0] [ 2.252977] bus: 07 index 1 mmio: [0, 0] [ 2.257092] bus: 07 index 2 mmio: [0, 0] [ 2.261210] bus: 07 index 3 mmio: [0, 0] [ 2.265335] bus: 08 index 0 mmio: [0, 0] [ 2.269451] bus: 08 index 1 mmio: [0, 0] [ 2.273570] bus: 08 index 2 mmio: [0, 0] [ 2.277688] bus: 08 index 3 mmio: [0, 0] [ 2.281803] bus: 09 index 0 io port: [3000, 3fff] [ 2.286702] bus: 09 index 1 mmio: [dc000000, dc0fffff] [ 2.292040] bus: 09 index 2 mmio: [d8000000, dbffffff] [ 2.297368] bus: 09 index 3 io port: [0, ffff] [ 2.302015] bus: 09 index 4 mmio: [0, ffffffffffffffff] [ 2.307441] NET: Registered protocol family 2 [ 2.342447] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.351747] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.362318] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.369559] TCP: Hash tables configured (established 524288 bind 65536) [ 2.376372] TCP reno registered [ 2.388889] NET: Registered protocol family 1 [ 2.393533] checking if image is initramfs... it is [ 2.447462] Freeing initrd memory: 1917k freed [ 2.452418] pci 0000:09:05.0: Boot video device [ 2.452642] input: Power Button (FF) as /class/input/input0 [ 2.458415] ACPI: Power Button (FF) [PWRF] [ 2.462809] input: Power Button (CM) as /class/input/input1 [ 2.468578] ACPI: Power Button (CM) [PWRB] [ 2.473058] found new irq_cfg for irq 20 [ 2.473059] 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 [ 2.473065] found new irq_desc for irq 20 [ 2.473069] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.474634] Switched to high resolution mode on CPU 2 [ 2.474651] Switched to high resolution mode on CPU 7 [ 2.474734] Switched to high resolution mode on CPU 5 [ 2.474746] Switched to high resolution mode on CPU 3 [ 2.475210] Switched to high resolution mode on CPU 1 [ 2.475274] Switched to high resolution mode on CPU 4 [ 2.475559] Switched to high resolution mode on CPU 6 [ 2.480410] Switched to high resolution mode on CPU 0 [ 2.480417] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.480420] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.485941] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.497588] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.502323] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.502334] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000 [ 2.520008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.527959] usb usb1: configuration #1 chosen from 1 choice [ 2.533803] hub 1-0:1.0: USB hub found [ 2.537753] hub 1-0:1.0: 8 ports detected [ 2.643637] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.643697] USB Universal Host Controller Interface driver v3.0 [ 2.649833] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.657167] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.657169] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.662661] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.670423] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 2.676470] usb usb2: configuration #1 chosen from 1 choice [ 2.682306] hub 2-0:1.0: USB hub found [ 2.686256] hub 2-0:1.0: 2 ports detected [ 2.793526] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.800868] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.800870] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.806365] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.814138] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 [ 2.820190] usb usb3: configuration #1 chosen from 1 choice [ 2.826029] hub 3-0:1.0: USB hub found [ 2.829983] hub 3-0:1.0: 2 ports detected [ 2.936857] found new irq_cfg for irq 22 [ 2.936858] 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 [ 2.936860] found new irq_desc for irq 22 [ 2.936862] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.944205] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.944207] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.949699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.957472] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 [ 2.963516] usb usb4: configuration #1 chosen from 1 choice [ 2.969356] hub 4-0:1.0: USB hub found [ 2.973310] hub 4-0:1.0: 2 ports detected [ 3.080191] found new irq_cfg for irq 23 [ 3.080192] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 3.080195] found new irq_desc for irq 23 [ 3.080197] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.087542] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.087544] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.093035] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.100820] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 [ 3.106869] usb usb5: configuration #1 chosen from 1 choice [ 3.112703] hub 5-0:1.0: USB hub found [ 3.116656] hub 5-0:1.0: 2 ports detected [ 3.223686] Simple Boot Flag at 0x40 set to 0x80 [ 3.232748] audit: initializing netlink socket (disabled) [ 3.238371] type=2000 audit(1219700065.236:1): initialized [ 3.249049] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.258941] VFS: Disk quotas dquot_6.5.1 [ 3.263163] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.271065] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.277919] msgmni has been set to 32106 [ 3.282179] async_tx: api initialized (async) [ 3.286738] io scheduler noop registered [ 3.290862] io scheduler anticipatory registered [ 3.295673] io scheduler deadline registered [ 3.300297] io scheduler cfq registered (default) [ 3.305352] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 3.305374] pcieport-driver 0000:00:01.0: found MSI capability [ 3.311410] found new irq_cfg for irq 33024 [ 3.311415] found new irq_desc for irq 33024 [ 3.311423] pci_express 0000:00:01.0:pcie00: allocate port service [ 3.311505] pci_express 0000:00:01.0:pcie01: allocate port service [ 3.311585] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 3.311606] pcieport-driver 0000:00:05.0: found MSI capability [ 3.317646] found new irq_cfg for irq 164096 [ 3.317648] found new irq_desc for irq 164096 [ 3.317655] pci_express 0000:00:05.0:pcie00: allocate port service [ 3.317727] pci_express 0000:00:05.0:pcie01: allocate port service [ 3.317806] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 3.317828] pcieport-driver 0000:00:09.0: found MSI capability [ 3.323867] found new irq_cfg for irq 295168 [ 3.323868] found new irq_desc for irq 295168 [ 3.323875] pci_express 0000:00:09.0:pcie00: allocate port service [ 3.323945] pci_express 0000:00:09.0:pcie01: allocate port service [ 3.324032] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 3.324057] pcieport-driver 0000:00:1c.0: found MSI capability [ 3.330104] found new irq_cfg for irq 917760 [ 3.330105] found new irq_desc for irq 917760 [ 3.330115] pci_express 0000:00:1c.0:pcie00: allocate port service [ 3.330188] pci_express 0000:00:1c.0:pcie02: allocate port service [ 3.330236] pci_express 0000:00:1c.0:pcie03: allocate port service [ 3.330335] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 3.330361] pci_express 0000:03:00.0:pcie11: allocate port service [ 3.330458] pcieport-driver 0000:04:00.0: setting latency timer to 64 [ 3.330480] pcieport-driver 0000:04:00.0: found MSI capability [ 3.336530] found new irq_cfg for irq 4194560 [ 3.336532] found new irq_desc for irq 4194560 [ 3.336543] pci_express 0000:04:00.0:pcie21: allocate port service [ 3.336651] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 3.336675] pcieport-driver 0000:04:02.0: found MSI capability [ 3.342722] found new irq_cfg for irq 4260096 [ 3.342724] found new irq_desc for irq 4260096 [ 3.342735] pci_express 0000:04:02.0:pcie21: allocate port service [ 3.343580] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 3.344172] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support [ 3.344758] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support [ 3.345543] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 3.353334] processor ACPI0007:00: registered as cooling_device0 [ 3.360253] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.367102] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 3.266881] processor ACPI0007:01: registered as cooling_device1 [ 3.381854] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.388729] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228) [ 3.397234] processor ACPI0007:02: registered as cooling_device2 [ 3.403440] ACPI: Processor [CPU2] (supports 8 throttling states) [ 3.410261] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228) [ 3.418748] processor ACPI0007:03: registered as cooling_device3 [ 3.424960] ACPI: Processor [CPU3] (supports 8 throttling states) [ 3.431805] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228) [ 3.270834] processor ACPI0007:04: registered as cooling_device4 [ 3.446507] ACPI: Processor [CPU4] (supports 8 throttling states) [ 3.453414] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228) [ 3.271042] processor ACPI0007:05: registered as cooling_device5 [ 3.468167] ACPI: Processor [CPU5] (supports 8 throttling states) [ 3.475014] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228) [ 3.467918] processor ACPI0007:06: registered as cooling_device6 [ 3.489708] ACPI: Processor [CPU6] (supports 8 throttling states) [ 3.496547] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228) [ 3.505058] processor ACPI0007:07: registered as cooling_device7 [ 3.511266] ACPI: Processor [CPU7] (supports 8 throttling states) [ 3.577486] Non-volatile memory driver v1.2 [ 3.582244] intel_rng: FWH not detected [ 3.586374] Linux agpgart interface v0.103 [ 3.590746] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 3.597254] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.603650] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.610425] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.616418] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.637353] FDC 0 is a post-1991 82077 [ 3.643999] brd: module loaded [ 3.648125] loop: module loaded [ 3.651483] tun: Universal TUN/TAP device driver, 1.6 [ 3.656733] tun: (C) 1999-2004 Max Krasnyansky [ 3.663226] console [netcon0] enabled [ 3.667087] netconsole: network logging started [ 3.671813] Uniform Multi-Platform E-IDE driver [ 3.676626] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.686719] Probing IDE interface ide0... [ 4.386871] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive [ 5.030061] Probing IDE interface ide1... [ 5.563407] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.568224] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.066667] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache [ 5.584052] Uniform CD-ROM driver Revision: 3.20 [ 7.726667] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 8.179669] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 8.186885] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 8.193019] Driver 'sd' needs updating - please use bus_type methods [ 8.199622] Driver 'sr' needs updating - please use bus_type methods [ 8.206389] ata_piix 0000:00:1f.1: version 2.12 [ 8.206400] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.213746] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] [ 8.221489] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) [ 8.229757] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] [ 8.237502] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) [ 8.245763] ata_piix 0000:00:1f.1: no available native port [ 8.252009] Fusion MPT base driver 3.04.07 [ 8.256298] Copyright (c) 1999-2008 LSI Corporation [ 8.261376] Fusion MPT SPI Host driver 3.04.07 [ 8.266077] Fusion MPT SAS Host driver 3.04.07 [ 8.271077] vendor=8086 device=244e [ 8.274770] found new irq_cfg for irq 17 [ 8.274771] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 8.274775] found new irq_desc for irq 17 [ 8.274778] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.335284] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.352396] ieee1394: raw1394: /dev/raw1394 device initialized [ 8.358974] usbcore: registered new interface driver usblp [ 8.364664] Initializing USB Mass Storage driver... [ 8.373899] usbcore: registered new interface driver usb-storage [ 8.380108] USB Mass Storage support registered. [ 8.385027] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 8.394944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.400119] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.405573] mice: PS/2 mouse device common for all mice [ 8.613333] md: linear personality registered for level -1 [ 8.772496] md: raid0 personality registered for level 0 [ 8.778017] md: raid1 personality registered for level 1 [ 8.783526] md: raid10 personality registered for level 10 [ 8.843752] raid6: int64x1 2858 MB/s [ 8.903766] raid6: int64x2 3533 MB/s [ 8.963751] raid6: int64x4 3433 MB/s [ 9.023764] raid6: int64x8 2296 MB/s [ 9.083752] raid6: sse2x1 3645 MB/s [ 9.143749] raid6: sse2x2 7359 MB/s [ 9.203750] raid6: sse2x4 8798 MB/s [ 9.207697] raid6: using algorithm sse2x4 (8798 MB/s) [ 9.212940] md: raid6 personality registered for level 6 [ 9.218446] md: raid5 personality registered for level 5 [ 9.223959] md: raid4 personality registered for level 4 [ 9.229468] md: multipath personality registered for level -4 [ 9.235625] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 9.244414] cpuidle: using governor ladder [ 9.248708] cpuidle: using governor menu [ 9.252892] usbcore: registered new interface driver usbhid [ 9.258660] usbhid: v2.6:USB HID core driver [ 9.263234] oprofile: using NMI interrupt. [ 9.267730] TCP cubic registered [ 9.271247] NET: Registered protocol family 10 [ 9.276347] IPv6 over IPv4 tunneling driver [ 9.281180] NET: Registered protocol family 17 [ 9.286175] RPC: Registered udp transport module. [ 9.291082] RPC: Registered tcp transport module. [ 9.298064] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 9.304600] Freeing unused kernel memory: 676k freed [ 9.309964] Write protecting the kernel read-only data: 5576k [ 9.541223] vendor=8086 device=4021 [ 9.541227] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.541232] arcmsr 0000:01:00.0: setting latency timer to 64 [ 9.553980] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.45 2008-3-14 [ 9.566674] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 9.566675] Driver Version 1.20.00.15 2008/02/27 [ 9.557083] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5 [ 9.556875] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.557708] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.557708] sd 0:0:0:0: [sda] Write Protect is off [ 9.557708] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.556666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.557083] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 9.554583] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB) [ 9.556875] sd 0:0:0:0: [sda] Write Protect is off [ 9.556875] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 9.557708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.557708] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8] [ 9.577500] sda1 sda2 sda3 sda4 [ 9.954660] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.954889] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.955753] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 9.956200] scsi 0:0:16:0: Attached scsi generic sg1 type 3 [ 10.023565] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 10.033876] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. [ 10.049059] Adaptec aacraid driver 1.1-5[2456]-ms [ 10.154668] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 10.156139] SGI XFS Quota Management subsystem [ 10.169930] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 10.169932] Copyright (c) 1999-2006 Intel Corporation. [ 14.230000] kjournald starting. Commit interval 5 seconds [ 14.236667] EXT3-fs: mounted filesystem with ordered data mode. [ 22.764869] found new irq_cfg for irq 19 [ 22.764871] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 22.764876] found new irq_desc for irq 19 [ 22.764879] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.775780] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 22.775863] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060) [ 22.775952] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.782406] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 22.782408] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 22.782479] vendor=8086 device=3518 [ 22.782480] vendor=8086 device=3500 [ 22.782482] vendor=8086 device=4029 [ 22.782484] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.782492] e1000e 0000:06:00.0: setting latency timer to 64 [ 22.855404] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14 [ 22.855406] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 22.855484] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 22.855506] vendor=8086 device=3518 [ 22.855507] vendor=8086 device=3500 [ 22.855508] vendor=8086 device=4029 [ 22.855510] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 22.855515] e1000e 0000:06:00.1: setting latency timer to 64 [ 22.932857] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15 [ 22.932859] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection [ 22.932937] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff [ 23.605493] EXT3 FS on sda3, internal journal [ 24.137915] XFS mounting filesystem sda4 [ 24.234165] Ending clean XFS mount for filesystem: sda4 [ 24.370791] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k [ 28.090792] found new irq_cfg for irq 6291712 [ 28.090798] found new irq_desc for irq 6291712 [ 28.145496] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.766056] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 30.768604] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.941246] eth0: no IPv6 routers present [ 61.380619] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 61.406663] NFSD: starting 90-second grace period