Linux version 2.6.27-rc4 (root@faramir) (gcc version 4.3.1 (Debian 4.3.1-9) ) #56 SMP Sat Aug 23 05:02:49 CEST 2008 Command line: root=/dev/mapper/main-root ro quiet vga=791 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable) BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved) BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS) BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) last_pfn = 0x7e7b0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 007e600000 page 2M 007e600000 - 007e7b0000 page 4k kernel direct mapping tables up to 7e7b0000 @ 8000-c000 last_map_addr: 7e7b0000 end: 7e7b0000 RAMDISK: 37aa2000 - 37fefbec DMI 2.4 present. ACPI: RSDP 000F7960, 0024 (r2 HP ) ACPI: XSDT 7E7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 7E7C8084, 00F4 (r4 HP 30C9 3 HP 1) ACPI: DSDT 7E7C8538, 13484 (r1 HP nc2500 10000 MSFT 3000001) ACPI: FACS 7E7E7D80, 0040 ACPI: SLIC 7E7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET 7E7C83BC, 0038 (r1 HP 30C9 1 HP 1) ACPI: APIC 7E7C83F4, 0068 (r1 HP 30C9 1 HP 1) ACPI: MCFG 7E7C845C, 003C (r1 HP 30C9 1 HP 1) ACPI: TCPA 7E7C8498, 0032 (r2 HP 30C9 1 HP 1) ACPI: ASF! 7E7C84CC, 0069 (r16 HP CHIMAYU 1 HP 0) ACPI: SSDT 7E7DB9BC, 02BE (r1 HP HPQPAT 1 MSFT 3000001) ACPI: SSDT 7E7DC640, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) ACPI: SSDT 7E7DC89F, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) ACPI: SSDT 7E7DC945, 04D7 (r1 HP CpuPm 3000 INTL 20060317) ACPI: DMI detected: Hewlett-Packard No NUMA configuration found Faking a node at 0000000000000000-000000007e7b0000 Bootmem setup node 0 0000000000000000-000000007e7b0000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000a000 - 0000000000019cf7] pages 10 (6 early reservations) ==> bootmem [0000000000 - 007e7b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000074c460] TEXT DATA BSS ==> [0000200000 - 000074c460] #3 [0037aa2000 - 0037fefbec] RAMDISK ==> [0037aa2000 - 0037fefbec] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007e7b0 On node 0 totalpages: 517967 DMA zone: 2478 pages, LIFO batch:0 DMA32 zone: 505937 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000) PERCPU: Allocating 47656 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 508415 Policy zone: DMA32 Kernel command line: root=/dev/mapper/main-root ro quiet vga=791 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1329.998 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2027948k/2072256k available (2279k kernel code, 43920k reserved, 1434k data, 368k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.99 BogoMIPS (lpj=5319992) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d Using local APIC timer interrupts. APIC timer calibration result 8312486 Detected 8.312 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2659.99 BogoMIPS (lpj=5319988) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (5319.99 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 net_namespace: 1552 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at f8000000 - fbffffff ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C003] (0000:00) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [e0000000, e00fffff] pci 0000:02:06.0: supports D1 pci 0000:02:06.0: supports D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:06.1: supports D1 pci 0000:02:06.1: supports D2 pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.1: PME# disabled pci 0000:02:06.2: supports D1 pci 0000:02:06.2: supports D2 pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.2: PME# disabled pci 0000:02:06.3: supports D1 pci 0000:02:06.3: supports D2 pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.3: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [e0100000, e03fffff] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) ACPI: PCI Interrupt Link [C130] (IRQs *10 11) ACPI: PCI Interrupt Link [C131] (IRQs 10 *11) ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C142] (IRQs *10 11) ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C144] (IRQs 10 *11) ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609] ACPI: Power Resource [C29F] (on) ACPI: Power Resource [C1C7] (off) ACPI: Power Resource [C3AD] (off) ACPI: Power Resource [C3B0] (off) ACPI: Power Resource [C3C3] (off) ACPI: Power Resource [C3C4] (off) ACPI: Power Resource [C3C5] (off) ACPI: Power Resource [C3C6] (off) ACPI: Power Resource [C3C7] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add mem 0x0-0x9ffff flags 0x1 pnp 00:00: add mem 0xe0000-0xfffff flags 0x0 pnp 00:00: add mem 0x100000-0x7e7fffff flags 0x1 pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x179 pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: parse allocated resources pnp 00:01: add io 0xcf8-0xcff flags 0x1 pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x560-0x56f flags 0x1 pnp 00:02: add io 0x570-0x57f flags 0x1 pnp 00:02: add mem 0xfed40000-0xfed44fff flags 0x1 pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) pnp 00:03: parse allocated resources pnp 00:03: add io 0xf0-0xff flags 0x1 pnp 00:03: add irq 13 flags 0x1 pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0x0-0xf flags 0x1 pnp 00:04: add io 0x80-0x8f flags 0x1 pnp 00:04: add io 0xc0-0xdf flags 0x1 pnp 00:04: add dma 4 flags 0x2 pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x61-0x61 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0x70-0x71 flags 0x1 pnp 00:06: add io 0x72-0x73 flags 0x1 pnp 00:06: add irq 8 flags 0x1 pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: parse allocated resources pnp 00:07: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x60-0x60 flags 0x1 pnp 00:08: add io 0x64-0x64 flags 0x1 pnp 00:08: add irq 1 flags 0x1 pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: parse allocated resources pnp 00:09: add irq 12 flags 0x1 pnp 00:09: Plug and Play ACPI device, IDs SYN0130 SYN0100 SYN0002 PNP0f13 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x10-0x1f flags 0x1 pnp 00:0a: add io 0x24-0x3f flags 0x1 pnp 00:0a: add io 0x4e-0x4f flags 0x1 pnp 00:0a: add io 0x50-0x53 flags 0x1 pnp 00:0a: add io 0x63-0x63 flags 0x1 pnp 00:0a: add io 0x65-0x65 flags 0x1 pnp 00:0a: add io 0x67-0x67 flags 0x1 pnp 00:0a: add io 0x74-0x77 flags 0x1 pnp 00:0a: add io 0x90-0x9f flags 0x1 pnp 00:0a: add io 0xa4-0xbd flags 0x1 pnp 00:0a: add io 0x500-0x55f flags 0x1 pnp 00:0a: add io 0x800-0x80f flags 0x1 pnp 00:0a: add mem 0xffb00000-0xffbfffff flags 0x0 pnp 00:0a: add mem 0xfff00000-0xffffffff flags 0x0 pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: parse allocated resources pnp 00:0b: add irq 23 flags 0x1 pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0c: parse allocated resources pnp 00:0c: add io 0x4d0-0x4d1 flags 0x1 pnp 00:0c: add io 0x2f8-0x2ff flags 0x1 pnp 00:0c: add io 0x3f8-0x3ff flags 0x1 pnp 00:0c: add io 0x1000-0x107f flags 0x1 pnp 00:0c: add io 0x1100-0x113f flags 0x1 pnp 00:0c: add io 0x1200-0x121f flags 0x1 pnp 00:0c: add mem 0xf8000000-0xfbffffff flags 0x1 pnp 00:0c: add mem 0xfec00000-0xfec000ff flags 0x1 pnp 00:0c: add mem 0xfed20000-0xfed3ffff flags 0x1 pnp 00:0c: add mem 0xfed45000-0xfed8ffff flags 0x1 pnp 00:0c: add mem 0xfed90000-0xfed99fff flags 0x1 pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: parse allocated resources pnp 00:0d: add mem 0xcee00-0xcffff flags 0x0 pnp 00:0d: add mem 0xd2000-0xd3fff flags 0x0 pnp 00:0d: add mem 0xfeda0000-0xfedbffff flags 0x1 pnp 00:0d: add mem 0xfee00000-0xfee00fff flags 0x1 pnp 00:0d: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7e7fffff could not be reserved system 00:00: driver attached system 00:0a: ioport range 0x500-0x55f has been reserved system 00:0a: ioport range 0x800-0x80f has been reserved system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0a: driver attached system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x2f8-0x2ff has been reserved system 00:0c: ioport range 0x3f8-0x3ff has been reserved system 00:0c: ioport range 0x1000-0x107f has been reserved system 00:0c: ioport range 0x1100-0x113f has been reserved system 00:0c: ioport range 0x1200-0x121f has been reserved system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0c: iomem range 0xfed90000-0xfed99fff could not be reserved system 00:0c: driver attached system 00:0d: iomem range 0xcee00-0xcffff has been reserved system 00:0d: iomem range 0xd2000-0xd3fff has been reserved system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0d: driver attached pci 0000:02:06.0: BAR 9 too large: 0x00000000000000-0x00000003ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xe0000000-0xe00fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:06.0: IO window: 0x003000-0x0030ff pci 0000:02:06.0: IO window: 0x003400-0x0034ff pci 0000:02:06.0: MEM window: 0x80000000-0x83ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x3000-0x3fff pci 0000:00:1e.0: MEM window: 0xe0100000-0xe03fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 08 index 0 mmio: [0, 0] bus: 08 index 1 mmio: [0, 0] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 mmio: [0, 0] bus: 10 index 0 mmio: [0, 0] bus: 10 index 1 mmio: [e0000000, e00fffff] bus: 10 index 2 mmio: [0, 0] bus: 10 index 3 mmio: [0, 0] bus: 02 index 0 io port: [3000, 3fff] bus: 02 index 1 mmio: [e0100000, e03fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffffffffffff] bus: 03 index 0 io port: [3000, 30ff] bus: 03 index 1 io port: [3400, 34ff] bus: 03 index 2 mmio: [0, 3ffffff] bus: 03 index 3 mmio: [80000000, 83ffffff] NET: Registered protocol family 2 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 5430k freed audit: initializing netlink socket (disabled) type=2000 audit(1219753830.160:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3971 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004a80000, using 3072k, total 7616k vesafb: mode is 1024x768x16, linelength=2048, pages=3 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled pnp: the driver 'serial' has been registered serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 17) is a 16550A brd: module loaded pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:08: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:09: driver attached PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice pnp: the driver 'rtc_cmos' has been registered rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs rtc_cmos 00:06: driver attached cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 rtc_cmos 00:06: setting system clock to 2008-08-26 12:30:31 UTC (1219753831) Freeing unused kernel memory: 368k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Transitioning device [C3B1] to D3 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [C3B1] (off) ACPI: Transitioning device [C3B2] to D3 fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [C3B2] (off) ACPI: Transitioning device [C3C8] to D3 fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [C3C8] (off) ACPI: Transitioning device [C3C9] to D3 fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [C3C9] (off) ACPI: Transitioning device [C3CA] to D3 fan PNP0C0B:04: registered as cooling_device4 ACPI: Fan [C3CA] (off) ACPI: Transitioning device [C3CB] to D3 fan PNP0C0B:05: registered as cooling_device5 ACPI: Fan [C3CB] (off) ACPI: Transitioning device [C3CC] to D3 fan PNP0C0B:06: registered as cooling_device6 ACPI: Fan [C3CC] (off) ACPI: SSDT 7E7DBD42, 027F (r1 HP Cpu0Ist 3000 INTL 20060317) ACPI: SSDT 7E7DC046, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device7 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7E7DBC7A, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) ACPI: SSDT 7E7DBFC1, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device8 ACPI: Processor [CPU1] (supports 8 throttling states) Marking TSC unstable due to TSC halts in idle thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ6] (25 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ0] (38 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ1] (41 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (29 C) thermal LNXTHERM:05: registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (24 C) thermal LNXTHERM:06: registered as thermal_zone5 ACPI: Thermal Zone [TZ5] (70 C) No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000 USB Universal Host Controller Interface driver v3.0 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Clocksource tsc unstable (delta = -95685428 ns) e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:5e:3b:04 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020e0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 5-2: new full speed USB device using uhci_hcd and address 2 ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 mmc0: SDHCI controller on PCI [0000:02:06.2] using PIO ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4] Uniform Multi-Platform E-IDE driver ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15 usb 5-2: configuration #1 chosen from 1 choice ata1.00: ATA-7: SAMSUNG HS122JC, GQ100-04, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA ata1.01: ATAPI: MATSHITADVD-RAM UJ-852S, 1.02, max MWDMA2 ata1.00: configured for UDMA/100 ata1.01: configured for MWDMA2 ata2: port disabled. ignoring. isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS122JC GQ10 PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.02 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<4>Driver 'sr' needs updating - please use bus_type methods sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:1:0: Attached scsi generic sg1 type 5 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210] PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [C2BF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [C155] ACPI: WMI: Mapper loaded iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) ACPI: Battery Slot [C23D] (battery present) Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb ACPI: AC Adapter [C23B] (off-line) Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9] yenta_cardbus 0000:02:06.0: CardBus bridge, secondary bus 0000:03 yenta_cardbus 0000:02:06.0: IO window: 0x003000-0x0030ff yenta_cardbus 0000:02:06.0: IO window: 0x003400-0x0034ff yenta_cardbus 0000:02:06.0: PREFETCH window: 0x84400000-0x847fffff yenta_cardbus 0000:02:06.0: MEM window: 0x80000000-0x83ffffff pnp: the driver 'tpm_inf_pnp' has been registered tpm_inf_pnp 00:02: Found C284 with ID IFX0102 tpm_inf_pnp 00:02: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) tpm_inf_pnp 00:02: driver attached acpi device:02: registered as cooling_device9 input: Video Bus as /class/input/input4 Yenta: ISA IRQ mask 0x0cb8, PCI irq 18 Socket status: 30000006 ACPI: Video Device [C09A] (multi-head: yes rom: no post: no) Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:10:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels iwlagn 0000:10:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' input: PS/2 Generic Mouse as /class/input/input5 input: PC Speaker as /class/input/input6 iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 input: SynPS/2 Synaptics TouchPad as /class/input/input7 EXT3 FS on dm-1, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 across:2097144k iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-4965-2.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX wlan0: authenticate with AP 00:14:c1:38:e5:15 wlan0: authenticated wlan0: associate with AP 00:14:c1:38:e5:15 wlan0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=1) wlan0: associated NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bluetooth: L2CAP ver 2.10 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x35/0x3d() sysfs: duplicate filename 'vcs1' can not be created Modules linked in: rfcomm l2cap ipv6 ext2 coretemp acpi_cpufreq loop joydev snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 snd_seq_midi ecb snd_rawmidi snd_seq_midi_event pcmcia iwlagn snd_seq iwlcore snd_timer snd_seq_device rfkill video snd tpm_infineon yenta_socket led_class tpm rsrc_nonstatic output mac80211 tpm_bios ac pcspkr btusb soundcore snd_page_alloc pcmcia_core container evdev cfg80211 iTCO_wdt battery wmi psmouse serio_raw button bluetooth intel_agp ext3 jbd mbcache sha256_generic aes_x86_64 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod sg sr_mod cdrom sd_mod piix ata_piix ide_pci_generic ide_core ohci1394 sdhci_pci sdhci ieee1394 mmc_core ricoh_mmc e1000e uhci_hcd ata_generic ehci_hcd libata scsi_mod dock thermal processor fan thermal_sys Pid: 3627, comm: getty Not tainted 2.6.27-rc4 #56 Call Trace: [] warn_slowpath+0xae/0xd7 [] ? _spin_unlock_irq+0x9/0xc [] ? finish_task_switch+0x38/0x8f [] ? thread_return+0x9a/0xc8 [] ? blk_unplug+0x12/0x14 [] ? string+0x3d/0xa1 [] ? idr_get_empty_slot+0x153/0x22a [] ? sysfs_ilookup_test+0x0/0x14 [] ? sysfs_ilookup_test+0x0/0x14 [] ? _spin_unlock+0x9/0xb [] ? ifind+0x59/0x84 [] ? sysfs_ilookup_test+0x0/0x14 [] ? sysfs_find_dirent+0x1c/0x31 [] sysfs_add_one+0x35/0x3d [] create_dir+0x58/0x87 [] sysfs_create_dir+0x38/0x4f [] kobject_add_internal+0xdb/0x199 [] kobject_add_varg+0x41/0x4d [] kobject_add+0x89/0x8b [] ? get_page_from_freelist+0x41e/0x5f1 [] ? kobject_get+0x1a/0x22 [] ? get_device+0x17/0x1f [] device_add+0xf1/0x651 [] ? klist_init+0x35/0x47 [] device_register+0x19/0x1d [] device_create_vargs+0x9d/0xcb [] device_create+0x4b/0x4d [] ? __wake_up+0x43/0x4f [] ? tty_ldisc_enable+0x2b/0x2d [] ? vc_allocate+0x15/0x15b [] ? down+0x33/0x3b [] vcs_make_sysfs+0x35/0x66 [] con_open+0xb1/0xc2 [] tty_open+0x1d0/0x30b [] chrdev_open+0x15a/0x179 [] ? chrdev_open+0x0/0x179 [] __dentry_open+0x13a/0x24c [] nameidata_to_filp+0x2e/0x40 [] do_filp_open+0x3b4/0x7a1 [] ? cp_new_stat+0xe2/0xef [] ? need_resched+0x1e/0x28 [] ? _cond_resched+0x9/0x38 [] ? _spin_unlock+0x9/0xb [] ? alloc_fd+0x11d/0x12e [] do_sys_open+0x53/0xda [] sys_open+0x1b/0x1d [] system_call_fastpath+0x16/0x1b ---[ end trace 449db3636c4575a1 ]--- kobject_add_internal failed for vcs1 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 3627, comm: getty Tainted: G W 2.6.27-rc4 #56 Call Trace: [] ? kobject_put+0x47/0x4b [] kobject_add_internal+0x180/0x199 [] kobject_add_varg+0x41/0x4d [] kobject_add+0x89/0x8b [] ? get_page_from_freelist+0x41e/0x5f1 [] ? kobject_get+0x1a/0x22 [] ? get_device+0x17/0x1f [] device_add+0xf1/0x651 [] ? klist_init+0x35/0x47 [] device_register+0x19/0x1d [] device_create_vargs+0x9d/0xcb [] device_create+0x4b/0x4d [] ? __wake_up+0x43/0x4f [] ? tty_ldisc_enable+0x2b/0x2d [] ? vc_allocate+0x15/0x15b [] ? down+0x33/0x3b [] vcs_make_sysfs+0x35/0x66 [] con_open+0xb1/0xc2 [] tty_open+0x1d0/0x30b [] chrdev_open+0x15a/0x179 [] ? chrdev_open+0x0/0x179 [] __dentry_open+0x13a/0x24c [] nameidata_to_filp+0x2e/0x40 [] do_filp_open+0x3b4/0x7a1 [] ? cp_new_stat+0xe2/0xef [] ? need_resched+0x1e/0x28 [] ? _cond_resched+0x9/0x38 [] ? _spin_unlock+0x9/0xb [] ? alloc_fd+0x11d/0x12e [] do_sys_open+0x53/0xda [] sys_open+0x1b/0x1d [] system_call_fastpath+0x16/0x1b ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x35/0x3d() sysfs: duplicate filename 'vcsa1' can not be created Modules linked in: rfcomm l2cap ipv6 ext2 coretemp acpi_cpufreq loop joydev snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 snd_seq_midi ecb snd_rawmidi snd_seq_midi_event pcmcia iwlagn snd_seq iwlcore snd_timer snd_seq_device rfkill video snd tpm_infineon yenta_socket led_class tpm rsrc_nonstatic output mac80211 tpm_bios ac pcspkr btusb soundcore snd_page_alloc pcmcia_core container evdev cfg80211 iTCO_wdt battery wmi psmouse serio_raw button bluetooth intel_agp ext3 jbd mbcache sha256_generic aes_x86_64 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod sg sr_mod cdrom sd_mod piix ata_piix ide_pci_generic ide_core ohci1394 sdhci_pci sdhci ieee1394 mmc_core ricoh_mmc e1000e uhci_hcd ata_generic ehci_hcd libata scsi_mod dock thermal processor fan thermal_sys Pid: 3627, comm: getty Tainted: G W 2.6.27-rc4 #56 Call Trace: [] warn_slowpath+0xae/0xd7 [] ? down_trylock+0x2d/0x34 [] ? _spin_unlock+0x9/0xb [] ? string+0x3d/0xa1 [] ? idr_get_empty_slot+0x153/0x22a [] ? sysfs_ilookup_test+0x0/0x14 [] ? sysfs_ilookup_test+0x0/0x14 [] ? _spin_unlock+0x9/0xb [] ? ifind+0x59/0x84 [] ? sysfs_ilookup_test+0x0/0x14 [] ? sysfs_find_dirent+0x1c/0x31 [] sysfs_add_one+0x35/0x3d [] create_dir+0x58/0x87 [] sysfs_create_dir+0x38/0x4f [] kobject_add_internal+0xdb/0x199 [] kobject_add_varg+0x41/0x4d [] kobject_add+0x89/0x8b [] ? get_page_from_freelist+0x41e/0x5f1 [] ? kobject_get+0x1a/0x22 [] ? get_device+0x17/0x1f [] device_add+0xf1/0x651 [] ? klist_init+0x35/0x47 [] device_register+0x19/0x1d [] device_create_vargs+0x9d/0xcb [] device_create+0x4b/0x4d [] ? __wake_up+0x43/0x4f [] ? tty_ldisc_enable+0x2b/0x2d [] ? vc_allocate+0x15/0x15b [] ? down+0x33/0x3b [] vcs_make_sysfs+0x62/0x66 [] con_open+0xb1/0xc2 [] tty_open+0x1d0/0x30b [] chrdev_open+0x15a/0x179 [] ? chrdev_open+0x0/0x179 [] __dentry_open+0x13a/0x24c [] nameidata_to_filp+0x2e/0x40 [] do_filp_open+0x3b4/0x7a1 [] ? cp_new_stat+0xe2/0xef [] ? need_resched+0x1e/0x28 [] ? _cond_resched+0x9/0x38 [] ? _spin_unlock+0x9/0xb [] ? alloc_fd+0x11d/0x12e [] do_sys_open+0x53/0xda [] sys_open+0x1b/0x1d [] system_call_fastpath+0x16/0x1b ---[ end trace 449db3636c4575a1 ]--- kobject_add_internal failed for vcsa1 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 3627, comm: getty Tainted: G W 2.6.27-rc4 #56 Call Trace: [] ? kobject_put+0x47/0x4b [] kobject_add_internal+0x180/0x199 [] kobject_add_varg+0x41/0x4d [] kobject_add+0x89/0x8b [] ? get_page_from_freelist+0x41e/0x5f1 [] ? kobject_get+0x1a/0x22 [] ? get_device+0x17/0x1f [] device_add+0xf1/0x651 [] ? klist_init+0x35/0x47 [] device_register+0x19/0x1d [] device_create_vargs+0x9d/0xcb [] device_create+0x4b/0x4d [] ? __wake_up+0x43/0x4f [] ? tty_ldisc_enable+0x2b/0x2d [] ? vc_allocate+0x15/0x15b [] ? down+0x33/0x3b [] vcs_make_sysfs+0x62/0x66 [] con_open+0xb1/0xc2 [] tty_open+0x1d0/0x30b [] chrdev_open+0x15a/0x179 [] ? chrdev_open+0x0/0x179 [] __dentry_open+0x13a/0x24c [] nameidata_to_filp+0x2e/0x40 [] do_filp_open+0x3b4/0x7a1 [] ? cp_new_stat+0xe2/0xef [] ? need_resched+0x1e/0x28 [] ? _cond_resched+0x9/0x38 [] ? _spin_unlock+0x9/0xb [] ? alloc_fd+0x11d/0x12e [] do_sys_open+0x53/0xda [] sys_open+0x1b/0x1d [] system_call_fastpath+0x16/0x1b wlan0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 domain 2: span 0-1 level NODE groups: 0-1