[ 0.000000] Linux version 2.6.26.3r4 (root@energy) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #1 SMP Thu Aug 28 20:17:38 CEST 2008 [ 0.000000] Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/md1 md=1,/dev/sda3,/dev/sdb3 nopat udev doadm [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] PAT support disabled. [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] max_pfn_mapped = 1245184 [ 0.000000] init_memory_mapping [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F98F0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 4000809 MSFT 97) [ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19201 201 INTL 20051117) [ 0.000000] ACPI: FACS CFFC0000, 0040 [ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 4000809 MSFT 97) [ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 4000809 MSFT 97) [ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 4000809 MSFT 97) [ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 4000809 MSFT 97) [ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-631e97] TEXT DATA BSS [ 0.000000] early res: 3 [37f10000-37fef507] RAMDISK [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20002e00000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000d5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 851888 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 1048399 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1178 pages reserved [ 0.000000] DMA zone: 2765 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000 [ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 30512 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030197 [ 0.000000] Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/md1 md=1,/dev/sda3,/dev/sdb3 nopat udev doadm [ 0.000000] md: Will configure md1 (super-block) from /dev/sda3,/dev/sdb3, below. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 3013.881 MHz processor. [ 0.003333] spurious 8259A interrupt: IRQ7. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003333] Checking aperture... [ 0.003333] Node 0: aperture @ 4000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] No AGP bridge found [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ 4000000 [ 0.003333] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [ 0.003333] Memory: 4046192k/4980736k available (2726k kernel code, 146828k reserved, 952k data, 252k init) [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] hpet clockevent registered [ 0.086484] Calibrating delay using timer specific routine.. 6034.73 BogoMIPS (lpj=10053981) [ 0.086567] Mount-cache hash table entries: 256 [ 0.086661] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.086661] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.086661] CPU: Physical Processor ID: 0 [ 0.086661] CPU: Processor Core ID: 0 [ 0.086661] ACPI: Core revision 20080321 [ 0.123325] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.123325] Using local APIC timer interrupts. [ 0.126658] APIC timer calibration result 12557846 [ 0.126658] Detected 12.557 MHz APIC timer. [ 0.126658] Booting processor 1/1 ip 6000 [ 0.136657] Initializing CPU#1 [ 0.136657] Calibrating delay using timer specific routine.. 6030.94 BogoMIPS (lpj=10046310) [ 0.136657] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.136657] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.136657] CPU: Physical Processor ID: 0 [ 0.136657] CPU: Processor Core ID: 1 [ 0.219817] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.219985] Brought up 2 CPUs [ 0.219985] Total of 2 processors activated (12065.68 BogoMIPS). [ 0.219985] net_namespace: 936 bytes [ 0.219985] NET: Registered protocol family 16 [ 0.219985] No dock devices found. [ 0.219985] node 0 link 0: io port [1000, ffffff] [ 0.219985] node 0 link 0: io port [2000, 2fff] [ 0.219985] TOM: 00000000d0000000 aka 3328M [ 0.219985] node 0 link 0: mmio [e0000000, efffffff] [ 0.219985] node 0 link 0: mmio [a0000, bffff] [ 0.219985] node 0 link 0: mmio [d0000000, fe0bffff] [ 0.219985] TOM2: 0000000130000000 aka 4864M [ 0.219985] bus: [00,07] on node 0 link 0 [ 0.219985] bus: 00 index 0 io port: [0, ffff] [ 0.219985] bus: 00 index 1 mmio: [d0000000, ffffffff] [ 0.219985] bus: 00 index 2 mmio: [a0000, bffff] [ 0.219985] bus: 00 index 3 mmio: [130000000, fcffffffff] [ 0.219985] ACPI: bus type pci registered [ 0.219985] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.219985] PCI: Not using MMCONFIG. [ 0.219985] PCI: Using configuration type 1 for base access [ 0.219985] ACPI: EC: Look up EC in DSDT [ 0.226301] ACPI: Interpreter enabled [ 0.226328] ACPI: (supports S0 S1 S3 S4 S5) [ 0.226651] ACPI: Using IOAPIC for interrupt routing [ 0.226651] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.229985] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.236651] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.243317] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.243851] PCI: Transparent bridge - 0000:00:08.0 [ 0.244126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.244313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.244451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.244530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.244609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.244687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.249983] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.249983] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.249983] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 0.249983] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.250327] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 0.250647] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 0.250967] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.251309] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.251629] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.251950] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 0.252291] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.252612] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.252954] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.253296] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.253630] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.253972] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.254294] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.254663] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.255005] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled. [ 0.255347] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled. [ 0.255808] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.255929] pnp: PnP ACPI init [ 0.255956] ACPI: bus type pnp registered [ 0.259983] pnp: PnP ACPI: found 13 devices [ 0.259983] ACPI: ACPI bus type pnp unregistered [ 0.259983] SCSI subsystem initialized [ 0.259983] libata version 3.00 loaded. [ 0.259983] usbcore: registered new interface driver usbfs [ 0.259983] usbcore: registered new interface driver hub [ 0.259983] usbcore: registered new device driver usb [ 0.259983] PCI: Using ACPI for IRQ routing [ 0.276648] PCI-DMA: Disabling AGP. [ 0.276648] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 0.276648] PCI-DMA: using GART IOMMU. [ 0.276648] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.276648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.276648] hpet0: 3 32-bit timers, 25000000 Hz [ 0.278080] Switched to high resolution mode on CPU 0 [ 0.278080] Switched to high resolution mode on CPU 1 [ 0.284774] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.284801] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.284827] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.284853] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.284879] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.285535] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.285562] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.285593] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.285619] system 00:05: ioport range 0x2c00-0x2c7f has been reserved [ 0.285645] system 00:05: ioport range 0x2c80-0x2cff has been reserved [ 0.285672] system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved [ 0.285705] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.285733] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.285765] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.285795] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.285825] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.285851] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.285876] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.285902] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 0.285930] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved [ 0.286671] PCI: Bridge: 0000:00:08.0 [ 0.286671] IO window: d000-dfff [ 0.286671] MEM window: 0xfea00000-0xfeafffff [ 0.286671] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff [ 0.286671] PCI: Bridge: 0000:00:0b.0 [ 0.286671] IO window: c000-cfff [ 0.286671] MEM window: 0xfe900000-0xfe9fffff [ 0.286671] PREFETCH window: disabled. [ 0.286671] PCI: Bridge: 0000:00:0c.0 [ 0.286671] IO window: disabled. [ 0.286671] MEM window: disabled. [ 0.286671] PREFETCH window: disabled. [ 0.286671] PCI: Bridge: 0000:00:0d.0 [ 0.286671] IO window: e000-efff [ 0.286671] MEM window: 0xfeb00000-0xfebfffff [ 0.286671] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.286671] PCI: Bridge: 0000:00:0e.0 [ 0.286671] IO window: disabled. [ 0.286671] MEM window: disabled. [ 0.286671] PREFETCH window: disabled. [ 0.286671] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.286671] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.286671] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.286671] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.286671] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.286671] NET: Registered protocol family 2 [ 0.314415] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.314804] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.316221] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.316671] TCP: Hash tables configured (established 262144 bind 65536) [ 0.316671] TCP reno registered [ 0.324337] NET: Registered protocol family 1 [ 0.324430] checking if image is initramfs... it is [ 0.366321] Freeing initrd memory: 893k freed [ 0.370008] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.370008] msgmni has been set to 7905 [ 0.370008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.370008] io scheduler noop registered [ 0.370008] io scheduler cfq registered (default) [ 0.370008] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.370008] pci 0000:04:00.0: Boot video device [ 0.370008] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.370008] assign_interrupt_mode Found MSI capability [ 0.370008] Allocate Port Service[0000:00:0b.0:pcie00] [ 0.370008] Allocate Port Service[0000:00:0b.0:pcie03] [ 0.370008] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.370008] assign_interrupt_mode Found MSI capability [ 0.370008] Allocate Port Service[0000:00:0c.0:pcie00] [ 0.370008] Allocate Port Service[0000:00:0c.0:pcie03] [ 0.370008] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.370008] assign_interrupt_mode Found MSI capability [ 0.370008] Allocate Port Service[0000:00:0d.0:pcie00] [ 0.370008] Allocate Port Service[0000:00:0d.0:pcie03] [ 0.370008] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.370008] assign_interrupt_mode Found MSI capability [ 0.370008] Allocate Port Service[0000:00:0e.0:pcie00] [ 0.370008] Allocate Port Service[0000:00:0e.0:pcie03] [ 0.370008] input: Power Button (FF) as /class/input/input0 [ 0.370008] ACPI: Power Button (FF) [PWRF] [ 0.370008] input: Power Button (CM) as /class/input/input1 [ 0.370008] ACPI: Power Button (CM) [PWRB] [ 0.370008] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.370008] ACPI: ACPI0007:01 is registered as cooling_device1 [ 0.406671] Real Time Clock Driver v1.12ac [ 0.406671] hpet_resources: 0xfed00000 is busy [ 0.406671] Linux agpgart interface v0.103 [ 0.406672] brd: module loaded [ 0.406672] loop: module loaded [ 0.406672] Driver 'sd' needs updating - please use bus_type methods [ 0.406672] ahci 0000:00:0a.0: version 3.0 [ 0.406672] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.406672] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.425546] ahci 0000:00:0a.0: controller can do NCQ, turning on CAP_NCQ [ 1.427835] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.427864] ahci 0000:00:0a.0: flags: 64bit ncq sntf led clo pmp pio [ 1.427890] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 1.430005] scsi0 : ahci [ 1.430005] scsi1 : ahci [ 1.430005] scsi2 : ahci [ 1.430005] scsi3 : ahci [ 1.430005] ata1: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc100 irq 23 [ 1.430005] ata2: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc180 irq 23 [ 1.430005] ata3: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc200 irq 23 [ 1.430005] ata4: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc280 irq 23 [ 1.747747] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.754004] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 1.754004] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.757738] ata1.00: configured for UDMA/133 [ 2.078422] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.084405] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 2.084405] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.087738] ata2.00: configured for UDMA/133 [ 2.407746] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.408295] ata3.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 2.408320] ata3.00: 312581808 sectors, multi 16: LBA48 [ 2.408940] ata3.00: configured for UDMA/133 [ 2.727746] ata4: SATA link down (SStatus 0 SControl 300) [ 2.727746] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 2.727746] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 2.727746] sd 0:0:0:0: [sda] Write Protect is off [ 2.727746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.727746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.727746] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 2.727746] sd 0:0:0:0: [sda] Write Protect is off [ 2.727746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.727746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.727746] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.755254] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.755254] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.755254] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 2.755254] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 2.755254] sd 1:0:0:0: [sdb] Write Protect is off [ 2.755254] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.755254] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.755254] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 2.755254] sd 1:0:0:0: [sdb] Write Protect is off [ 2.755254] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.755254] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.755254] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 2.776422] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.776422] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.776422] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5 [ 2.776422] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB) [ 2.776422] sd 2:0:0:0: [sdc] Write Protect is off [ 2.776422] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.776422] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.776422] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB) [ 2.776422] sd 2:0:0:0: [sdc] Write Protect is off [ 2.776422] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.776422] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.776422] sdc: sdc1 [ 2.795296] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.795296] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.795296] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.798596] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.798624] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.828570] md: raid1 personality registered for level 1 [ 2.828570] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 2.828570] EDAC MC: Ver: 2.1.0 Aug 28 2008 [ 2.828570] cpuidle: using governor ladder [ 2.828570] cpuidle: using governor menu [ 2.828570] usbcore: registered new interface driver usbhid [ 2.828570] usbhid: v2.6:USB HID core driver [ 2.828570] TCP cubic registered [ 2.828570] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 2.828570] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 2.828570] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 2.828570] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 2.828570] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 2.828570] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 2.828570] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 2.828570] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 2.828570] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 2.828570] Freeing unused kernel memory: 252k freed [ 2.835237] ata1: hard resetting link [ 2.851788] input: AT Translated Set 2 keyboard as /class/input/input2 [ 3.154414] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.167049] ata1.00: configured for UDMA/133 [ 3.167051] ata1: EH complete [ 3.167108] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 3.167119] sd 0:0:0:0: [sda] Write Protect is off [ 3.167121] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.167136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.351905] Driver 'sr' needs updating - please use bus_type methods [ 3.362655] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 3.362655] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 3.371901] scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 3.371901] [ 3.371901] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs [ 3.371901] [ 4.501910] Clocksource tsc unstable (delta = -330947176 ns) [ 7.511234] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 7.511240] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 7.511247] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 7.511249] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 7.511906] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 7.511906] ehci_hcd 0000:00:02.1: debug port 1 [ 7.511906] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 7.511906] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe8fec00 [ 7.518574] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.519757] usb usb1: configuration #1 chosen from 1 choice [ 7.520910] hub 1-0:1.0: USB hub found [ 7.520915] hub 1-0:1.0: 10 ports detected [ 7.654547] Initializing USB Mass Storage driver... [ 7.847744] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 7.975238] usb 1-3: configuration #1 chosen from 1 choice [ 7.975238] hub 1-3:1.0: USB hub found [ 7.975238] hub 1-3:1.0: 4 ports detected [ 8.261994] usb 1-3.1: new low speed USB device using ehci_hcd and address 3 [ 8.351905] usb 1-3.1: configuration #1 chosen from 1 choice [ 8.363478] input: Logitech USB Receiver as /class/input/input3 [ 8.376394] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 8.383762] input: Logitech USB Receiver as /class/input/input4 [ 8.409824] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1 [ 8.411981] usbcore: registered new interface driver usb-storage [ 8.411981] USB Mass Storage support registered. [ 8.438573] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.438573] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 8.438573] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 8.438573] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 8.438573] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 8.438573] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 8.438573] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe8ff000 [ 8.491907] usb usb2: configuration #1 chosen from 1 choice [ 8.491907] hub 2-0:1.0: USB hub found [ 8.491907] hub 2-0:1.0: 10 ports detected [ 11.738572] md: Autodetecting RAID arrays. [ 11.815237] md: Scanned 8 and added 8 devices. [ 11.815237] md: autorun ... [ 11.815237] md: considering sdb6 ... [ 11.815237] md: adding sdb6 ... [ 11.815237] md: sdb5 has different UUID to sdb6 [ 11.815237] md: sdb3 has different UUID to sdb6 [ 11.815237] md: sdb1 has different UUID to sdb6 [ 11.815237] md: adding sda6 ... [ 11.815237] md: sda5 has different UUID to sdb6 [ 11.815237] md: sda3 has different UUID to sdb6 [ 11.815237] md: sda1 has different UUID to sdb6 [ 11.815237] md: created md3 [ 11.815237] md: bind [ 11.815237] md: bind [ 11.815237] md: running: [ 11.841904] raid1: raid set md3 active with 2 out of 2 mirrors [ 11.841904] md: considering sdb5 ... [ 11.841904] md: adding sdb5 ... [ 11.841904] md: sdb3 has different UUID to sdb5 [ 11.841904] md: sdb1 has different UUID to sdb5 [ 11.841904] md: adding sda5 ... [ 11.841904] md: sda3 has different UUID to sdb5 [ 11.841904] md: sda1 has different UUID to sdb5 [ 11.841905] md: created md2 [ 11.841905] md: bind [ 11.841905] md: bind [ 11.841905] md: running: [ 11.848571] raid1: raid set md2 active with 2 out of 2 mirrors [ 11.848571] md: considering sdb3 ... [ 11.848571] md: adding sdb3 ... [ 11.848571] md: sdb1 has different UUID to sdb3 [ 11.848571] md: adding sda3 ... [ 11.848571] md: sda1 has different UUID to sdb3 [ 11.848571] md: created md1 [ 11.848571] md: bind [ 11.848571] md: bind [ 11.848571] md: running: [ 11.856478] raid1: raid set md1 active with 2 out of 2 mirrors [ 11.857632] md: considering sdb1 ... [ 11.857635] md: adding sdb1 ... [ 11.857639] md: adding sda1 ... [ 11.858571] md: created md0 [ 11.858571] md: bind [ 11.858571] md: bind [ 11.858571] md: running: [ 11.865238] raid1: raid set md0 active with 2 out of 2 mirrors [ 11.865238] md: ... autorun DONE. [ 11.901904] reiser4: md1: found disk format 4.0.0. [ 16.599855] r8169 Gigabit Ethernet driver 2.2LK loaded [ 16.600092] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18 [ 16.600096] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 18 (level, low) -> IRQ 18 [ 16.600105] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 16.600175] eth0: RTL8168b/8111b at 0xffffc2000005e000, 00:19:66:47:f3:cb, XID 38000000 IRQ 315 [ 17.039079] reiser4: md2: found disk format 4.0.0. [ 18.235752] reiser4: md3: found disk format 4.0.0. [ 42.928883] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 42.969544] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 43.421902] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17 [ 43.421902] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 17 (level, low) -> IRQ 17 [ 43.423375] Audigy2 value: Special config. [ 43.536318] r8169: eth0: link up [ 43.536321] r8169: eth0: link up [ 44.241906] i2c /dev entries driver [ 44.278391] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 44.278413] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 44.348568] w83627ehf: Found W83627EHG chip at 0x290 [ 48.565349] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 48.608566] [fglrx] Maximum main memory to use for locked dma buffers: 3791 MBytes. [ 48.608691] [fglrx] vendor: 1002 device: 9501 count: 1 [ 48.609024] [fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 48.609263] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 16 [ 48.609269] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 16 (level, low) -> IRQ 16 [ 48.609273] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 48.612001] [fglrx] PAT is enabled successfully! [ 48.612035] [fglrx] module loaded - fglrx 8.52.3 [Aug 1 2008] with 1 minors [ 50.351902] [fglrx] Maximum main memory to use for locked dma buffers: 3791 MBytes. [ 50.361539] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 50.361544] [fglrx] Reserved FB block: Unshared offset:ff7f000, size:80000