Linux version 2.6.27-rc4-hh1 (helgehaf@hh2) (gcc version 4.3.1 (Debian 4.3.1-2) ) #4 SMP Thu Aug 28 14:58:33 CEST 2008 Command line: root=/dev/sda2 ro mtrr_spare_reg_nr=3 debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe5a800 (usable) BIOS-e820: 000000007fe5a800 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) last_pfn = 0x7fe5a max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 total RAM coverred: 2047M gran_size: 1M chunk_size: 1M num_reg: 8 lose RAM: 7M gran_size: 1M chunk_size: 2M num_reg: 8 lose RAM: 7M gran_size: 1M chunk_size: 4M num_reg: 8 lose RAM: 7M gran_size: 1M chunk_size: 8M num_reg: 8 lose RAM: 7M *BAD* gran_size: 1M chunk_size: 16M num_reg: 8 lose RAM: -1M gran_size: 1M chunk_size: 32M num_reg: 8 lose RAM: 0M gran_size: 1M chunk_size: 64M num_reg: 7 lose RAM: 0M gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M gran_size: 1M chunk_size: 256M num_reg: 5 lose RAM: 0M gran_size: 1M chunk_size: 512M num_reg: 4 lose RAM: 0M gran_size: 1M chunk_size: 1024M num_reg: 3 lose RAM: 0M gran_size: 1M chunk_size: 2048M num_reg: 2 lose RAM: 0M gran_size: 1M chunk_size: 4096M num_reg: 8 lose RAM: 7M gran_size: 2M chunk_size: 2M num_reg: 8 lose RAM: 7M gran_size: 2M chunk_size: 4M num_reg: 8 lose RAM: 7M gran_size: 2M chunk_size: 8M num_reg: 8 lose RAM: 7M *BAD* gran_size: 2M chunk_size: 16M num_reg: 8 lose RAM: -1M gran_size: 2M chunk_size: 32M num_reg: 8 lose RAM: 1M gran_size: 2M chunk_size: 64M num_reg: 7 lose RAM: 1M gran_size: 2M chunk_size: 128M num_reg: 6 lose RAM: 1M gran_size: 2M chunk_size: 256M num_reg: 5 lose RAM: 1M gran_size: 2M chunk_size: 512M num_reg: 4 lose RAM: 1M gran_size: 2M chunk_size: 1024M num_reg: 3 lose RAM: 1M gran_size: 2M chunk_size: 2048M num_reg: 2 lose RAM: 1M gran_size: 2M chunk_size: 4096M num_reg: 8 lose RAM: 7M gran_size: 4M chunk_size: 4M num_reg: 8 lose RAM: 7M gran_size: 4M chunk_size: 8M num_reg: 8 lose RAM: 7M *BAD* gran_size: 4M chunk_size: 16M num_reg: 8 lose RAM: -1M gran_size: 4M chunk_size: 32M num_reg: 8 lose RAM: 3M gran_size: 4M chunk_size: 64M num_reg: 7 lose RAM: 3M gran_size: 4M chunk_size: 128M num_reg: 6 lose RAM: 3M gran_size: 4M chunk_size: 256M num_reg: 5 lose RAM: 3M gran_size: 4M chunk_size: 512M num_reg: 4 lose RAM: 3M gran_size: 4M chunk_size: 1024M num_reg: 3 lose RAM: 3M gran_size: 4M chunk_size: 2048M num_reg: 2 lose RAM: 3M gran_size: 4M chunk_size: 4096M num_reg: 8 lose RAM: 7M gran_size: 8M chunk_size: 8M num_reg: 8 lose RAM: 7M gran_size: 8M chunk_size: 16M num_reg: 8 lose RAM: 7M gran_size: 8M chunk_size: 32M num_reg: 8 lose RAM: 7M gran_size: 8M chunk_size: 64M num_reg: 7 lose RAM: 7M gran_size: 8M chunk_size: 128M num_reg: 6 lose RAM: 7M gran_size: 8M chunk_size: 256M num_reg: 5 lose RAM: 7M gran_size: 8M chunk_size: 512M num_reg: 4 lose RAM: 7M gran_size: 8M chunk_size: 1024M num_reg: 3 lose RAM: 7M gran_size: 8M chunk_size: 2048M num_reg: 2 lose RAM: 7M gran_size: 8M chunk_size: 4096M num_reg: 8 lose RAM: 7M gran_size: 16M chunk_size: 16M num_reg: 7 lose RAM: 15M gran_size: 16M chunk_size: 32M num_reg: 7 lose RAM: 15M gran_size: 16M chunk_size: 64M num_reg: 7 lose RAM: 15M gran_size: 16M chunk_size: 128M num_reg: 6 lose RAM: 15M gran_size: 16M chunk_size: 256M num_reg: 5 lose RAM: 15M gran_size: 16M chunk_size: 512M num_reg: 4 lose RAM: 15M gran_size: 16M chunk_size: 1024M num_reg: 3 lose RAM: 15M gran_size: 16M chunk_size: 2048M num_reg: 2 lose RAM: 15M gran_size: 16M chunk_size: 4096M num_reg: 7 lose RAM: 15M gran_size: 32M chunk_size: 32M num_reg: 6 lose RAM: 31M gran_size: 32M chunk_size: 64M num_reg: 6 lose RAM: 31M gran_size: 32M chunk_size: 128M num_reg: 6 lose RAM: 31M gran_size: 32M chunk_size: 256M num_reg: 5 lose RAM: 31M gran_size: 32M chunk_size: 512M num_reg: 4 lose RAM: 31M gran_size: 32M chunk_size: 1024M num_reg: 3 lose RAM: 31M gran_size: 32M chunk_size: 2048M num_reg: 2 lose RAM: 31M gran_size: 32M chunk_size: 4096M num_reg: 6 lose RAM: 31M gran_size: 64M chunk_size: 64M num_reg: 5 lose RAM: 63M gran_size: 64M chunk_size: 128M num_reg: 5 lose RAM: 63M gran_size: 64M chunk_size: 256M num_reg: 5 lose RAM: 63M gran_size: 64M chunk_size: 512M num_reg: 4 lose RAM: 63M gran_size: 64M chunk_size: 1024M num_reg: 3 lose RAM: 63M gran_size: 64M chunk_size: 2048M num_reg: 2 lose RAM: 63M gran_size: 64M chunk_size: 4096M num_reg: 5 lose RAM: 63M gran_size: 128M chunk_size: 128M num_reg: 4 lose RAM: 127M gran_size: 128M chunk_size: 256M num_reg: 4 lose RAM: 127M gran_size: 128M chunk_size: 512M num_reg: 4 lose RAM: 127M gran_size: 128M chunk_size: 1024M num_reg: 3 lose RAM: 127M gran_size: 128M chunk_size: 2048M num_reg: 2 lose RAM: 127M gran_size: 128M chunk_size: 4096M num_reg: 4 lose RAM: 127M gran_size: 256M chunk_size: 256M num_reg: 3 lose RAM: 255M gran_size: 256M chunk_size: 512M num_reg: 3 lose RAM: 255M gran_size: 256M chunk_size: 1024M num_reg: 3 lose RAM: 255M gran_size: 256M chunk_size: 2048M num_reg: 2 lose RAM: 255M gran_size: 256M chunk_size: 4096M num_reg: 3 lose RAM: 255M gran_size: 512M chunk_size: 512M num_reg: 2 lose RAM: 511M gran_size: 512M chunk_size: 1024M num_reg: 2 lose RAM: 511M gran_size: 512M chunk_size: 2048M num_reg: 2 lose RAM: 511M gran_size: 512M chunk_size: 4096M num_reg: 2 lose RAM: 511M gran_size: 1024M chunk_size: 1024M num_reg: 1 lose RAM: 1023M gran_size: 1024M chunk_size: 2048M num_reg: 1 lose RAM: 1023M gran_size: 1024M chunk_size: 4096M num_reg: 1 lose RAM: 1023M gran_size: 2048M chunk_size: 2048M num_reg: 0 lose RAM: 2047M gran_size: 2048M chunk_size: 4096M num_reg: 0 lose RAM: 2047M Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 256M num_reg: 5 lose RAM: 0M range0: 0000000000000000 - 0000000070000000 Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB Setting variable MTRR 1, base: 1024MB, range: 512MB, type WB Setting variable MTRR 2, base: 1536MB, range: 256MB, type WB range: 0000000070000000 - 0000000080000000 Setting variable MTRR 3, base: 1792MB, range: 256MB, type WB hole: 000000007ff00000 - 0000000080000000 Setting variable MTRR 4, base: 2047MB, range: 1MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 After WB checking MTRR MAP PFN: 0000000000000000 - 0000000000080000 After UC checking MTRR MAP PFN: 0000000000000000 - 000000000007ff00 After sorting MTRR MAP PFN: 0000000000000000 - 000000000007ff00 init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe5a000 page 4k kernel direct mapping tables up to 7fe5a000 @ 8000-c000 last_map_addr: 7fe5a000 end: 7fe5a000 DMI 2.4 present. ACPI: RSDP 000FBB10, 0024 (r2 DELL ) ACPI: XSDT 7FE5D200, 0064 (r1 DELL M08 27D80715 ASL 61) ACPI: FACP 7FE5D09C, 00F4 (r4 DELL M08 27D80715 ASL 61) ACPI: DSDT 7FE5D800, 63EA (r2 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS 7FE6C000, 0040 ACPI: HPET 7FE5D300, 0038 (r1 DELL M08 1 ASL 61) ACPI: APIC 7FE5D400, 0068 (r1 DELL M08 27D80715 ASL 47) ACPI: ASF! 7FE5D000, 007E (r32 DELL M08 27D80715 ASL 61) ACPI: MCFG 7FE5D3C0, 003E (r16 DELL M08 27D80715 ASL 61) ACPI: TCPA 7FE5D700, 0032 (r1 0 ASL 0) ACPI: SLIC 7FE5D49C, 0176 (r1 DELL M08 27D80715 ASL 61) ACPI: SSDT 7FE5BA02, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: DMI detected: Dell Latitude D830 (5 early reservations) ==> bootmem [0000000000 - 007fe5a000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00016c14f4] TEXT DATA BSS ==> [0000200000 - 00016c14f4] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001800000-ffff8800033fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fe5a On node 0 totalpages: 523769 DMA zone: 3841 pages, LIFO batch:0 DMA32 zone: 512663 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) PERCPU: Allocating 76712 bytes of per cpu data NR_CPUS: 4096, nr_cpu_ids: 2, nr_node_ids 512 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516504 Kernel command line: root=/dev/sda2 ro mtrr_spare_reg_nr=3 debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1795.497 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2041176k/2095464k available (4096k kernel code, 53300k reserved, 3060k data, 1176k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=512 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.61 BogoMIPS (lpj=5984990) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d Using local APIC timer interrupts. APIC timer calibration result 12468730 Detected 12.468 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3592.02 BogoMIPS (lpj=5985646) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7185.64 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - B3, should be 57 [20080609] ACPI: SSDT 7FE6C080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: bridge 0000:00:01.0 io port: [e000, efff] PCI: bridge 0000:00:01.0 32bit mmio: [f2000000, f6efffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [f1f00000, f1ffffff] PCI: bridge 0000:00:1c.3 io port: [d000, dfff] PCI: bridge 0000:00:1c.3 32bit mmio: [f1c00000, f1efffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled PCI: bridge 0000:00:1c.5 32bit mmio: [f1b00000, f1bfffff] pci 0000:03:01.0: supports D1 pci 0000:03:01.0: supports D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled pci 0000:03:01.4: supports D1 pci 0000:03:01.4: supports D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [f1a00000, f1afffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: WMI: Mapper loaded Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add io 0xcf8-0xcff flags 0x1 pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: parse allocated resources pnp 00:01: add irq 12 flags 0x1 pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x60-0x60 flags 0x1 pnp 00:02: add io 0x64-0x64 flags 0x1 pnp 00:02: add io 0x62-0x62 flags 0x1 pnp 00:02: add io 0x66-0x66 flags 0x1 pnp 00:02: add irq 1 flags 0x1 pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:03: parse allocated resources pnp 00:03: add io 0x70-0x71 flags 0x1 pnp 00:03: add irq 8 flags 0x1 pnp 00:03: add io 0x72-0x77 flags 0x1 pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0x61-0x61 flags 0x1 pnp 00:04: add io 0x63-0x63 flags 0x1 pnp 00:04: add io 0x65-0x65 flags 0x1 pnp 00:04: add io 0x67-0x67 flags 0x1 pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x2e-0x2f flags 0x1 pnp 00:05: add io 0xc80-0xcaf flags 0x1 pnp 00:05: add io 0xcc0-0xcff flags 0x1 pnp 00:05: add io 0x4e-0x4f flags 0x1 pnp 00:05: PNP0c01: calling quirk_system_pci_resources+0x0/0x182 pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:06: parse allocated resources pnp 00:06: add dma 4 flags 0x4 pnp 00:06: add io 0x0-0xf flags 0x1 pnp 00:06: add io 0x80-0x85 flags 0x1 pnp 00:06: add io 0x87-0x8f flags 0x1 pnp 00:06: add io 0xc0-0xdf flags 0x1 pnp 00:06: add io 0x10-0x1f flags 0x1 pnp 00:06: add io 0x90-0x91 flags 0x1 pnp 00:06: add io 0x93-0x9f flags 0x1 pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:07: parse allocated resources pnp 00:07: add io 0xf0-0xff flags 0x1 pnp 00:07: add irq 13 flags 0x1 pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:08: parse allocated resources pnp 00:08: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:08: PNP0c01: calling quirk_system_pci_resources+0x0/0x182 pnp 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) pnp 00:09: parse allocated resources pnp 00:09: add irq 4 flags 0x11 pnp 00:09: add io 0x3f8-0x3ff flags 0x1 pnp 00:09: parse resource options pnp 00:09: dependent set 0 (acceptable) irq 3 4 6 12 flags 0x11 pnp 00:09: dependent set 0 (acceptable) io min 0x3f8 max 0x3f8 align 8 size 8 flags 0x1 pnp 00:09: dependent set 1 (acceptable) irq 3 4 6 12 flags 0x11 pnp 00:09: dependent set 1 (acceptable) io min 0x2f8 max 0x2f8 align 8 size 8 flags 0x1 pnp 00:09: dependent set 2 (acceptable) irq 3 4 6 12 flags 0x11 pnp 00:09: dependent set 2 (acceptable) io min 0x3e8 max 0x3e8 align 8 size 8 flags 0x1 pnp 00:09: dependent set 3 (acceptable) irq 3 4 6 12 flags 0x11 pnp 00:09: dependent set 3 (acceptable) io min 0x2e8 max 0x2e8 align 8 size 8 flags 0x1 pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add mem 0xfed40000-0xfed44fff flags 0x1 pnp 00:0a: add io 0xcb0-0xcbb flags 0x1 pnp 00:0a: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active) pnp 00:0b: parse allocated resources pnp 00:0b: add io 0x900-0x97f flags 0x1 pnp 00:0b: add io 0x92-0x92 flags 0x1 pnp 00:0b: add io 0xb2-0xb3 flags 0x1 pnp 00:0b: add io 0x20-0x21 flags 0x1 pnp 00:0b: add io 0xa0-0xa1 flags 0x1 pnp 00:0b: add irq 0 flags 0x10000000 pnp 00:0b: add io 0x4d0-0x4d1 flags 0x1 pnp 00:0b: add io 0x1000-0x1005 flags 0x1 pnp 00:0b: add io 0x1008-0x100f flags 0x1 pnp 00:0b: PNP0c01: calling quirk_system_pci_resources+0x0/0x182 pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:0c: parse allocated resources pnp 00:0c: add io 0xf400-0xf4fe flags 0x1 pnp 00:0c: add io 0x86-0x86 flags 0x1 pnp 00:0c: add io 0x1006-0x1007 flags 0x1 pnp 00:0c: add io 0x100a-0x1059 flags 0x1 pnp 00:0c: add io 0x1060-0x107f flags 0x1 pnp 00:0c: add io 0x1080-0x10bf flags 0x1 pnp 00:0c: add io 0x10c0-0x10df flags 0x1 pnp 00:0c: add io 0x1010-0x102f flags 0x1 pnp 00:0c: add io 0x809-0x809 flags 0x1 pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x182 pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:0d: parse allocated resources pnp 00:0d: add mem 0x0-0x9efff flags 0x1 pnp 00:0d: add mem 0x9f000-0x9ffff flags 0x1 pnp 00:0d: add mem 0xc0000-0xcffff flags 0x0 pnp 00:0d: add mem 0xe0000-0xfffff flags 0x0 pnp 00:0d: add mem 0x100000-0x7fe5a7ff flags 0x1 pnp 00:0d: add mem 0x7fe5a800-0x7fefffff flags 0x1 pnp 00:0d: add mem 0x7ff00000-0x7fffffff flags 0x1 pnp 00:0d: add mem 0x7ff00000-0x806fffff flags 0x0 pnp 00:0d: add mem 0xffe00000-0xffffffff flags 0x0 pnp 00:0d: add mem 0xffa00000-0xffbfffff flags 0x0 pnp 00:0d: add mem 0xfec00000-0xfec0ffff flags 0x1 pnp 00:0d: add mem 0xfee00000-0xfee0ffff flags 0x1 pnp 00:0d: add mem 0xfed20000-0xfed3ffff flags 0x0 pnp 00:0d: add mem 0xfed45000-0xfed8ffff flags 0x0 pnp 00:0d: add mem 0xfeda0000-0xfeda3fff flags 0x1 pnp 00:0d: add mem 0xfeda4000-0xfeda4fff flags 0x1 pnp 00:0d: add mem 0xfeda5000-0xfeda5fff flags 0x1 pnp 00:0d: add mem 0xfeda6000-0xfeda6fff flags 0x1 pnp 00:0d: add mem 0xfed18000-0xfed1bfff flags 0x1 pnp 00:0d: add mem 0xf8000000-0xfbffffff flags 0x1 pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x182 pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized DMAR:parse DMAR table failure. PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: the driver 'system' has been registered system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:05: driver attached system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:08: driver attached system 00:0b: ioport range 0x900-0x97f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: driver attached system 00:0c: ioport range 0xf400-0xf4fe has been reserved system 00:0c: ioport range 0x1080-0x10bf has been reserved system 00:0c: ioport range 0x10c0-0x10df has been reserved system 00:0c: ioport range 0x809-0x809 has been reserved system 00:0c: driver attached system 00:0d: iomem range 0x0-0x9efff could not be reserved system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff has been reserved system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved system 00:0d: iomem range 0x7fe5a800-0x7fefffff could not be reserved system 00:0d: iomem range 0x7ff00000-0x7fffffff could not be reserved system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved system 00:0d: driver attached pci 0000:03:01.0: BAR 9 too large: 0x00000000000000-0x00000003ffffff pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 pci 0000:03:01.0: IO window: 0x002000-0x0020ff pci 0000:03:01.0: IO window: 0x002400-0x0024ff pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:03:01.0: enabling device (0000 -> 0003) pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [e000, efff] bus: 01 index 1 mmio: [f2000000, f6efffff] bus: 01 index 2 mmio: [e0000000, efffffff] bus: 01 index 3 mmio: [0, 0] bus: 0b index 0 mmio: [0, 0] bus: 0b index 1 mmio: [0, 0] bus: 0b index 2 mmio: [0, 0] bus: 0b index 3 mmio: [0, 0] bus: 0c index 0 mmio: [0, 0] bus: 0c index 1 mmio: [f1f00000, f1ffffff] bus: 0c index 2 mmio: [0, 0] bus: 0c index 3 mmio: [0, 0] bus: 0d index 0 io port: [d000, dfff] bus: 0d index 1 mmio: [f1c00000, f1efffff] bus: 0d index 2 mmio: [f0000000, f01fffff] bus: 0d index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [f1b00000, f1bfffff] bus: 09 index 2 mmio: [0, 0] bus: 09 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [f1a00000, f1afffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 io port: [0, ffff] bus: 03 index 4 mmio: [0, ffffffffffffffff] bus: 04 index 0 io port: [2000, 20ff] bus: 04 index 1 io port: [2400, 24ff] bus: 04 index 2 mmio: [0, 3ffffff] bus: 04 index 3 mmio: [88000000, 8bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1220094183.736:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.9) msgmni has been set to 3987 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1a.0: Performing full reset pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1a.1: Performing full reset pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 pci 0000:00:1d.2: Performing full reset pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie02: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de042b nvidiafb: unknown NV_ARCH ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SBTN] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input4 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input5 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: SSDT 7FE5C538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 7FE5BECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FE5C77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 7FE5C4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (25 C) hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 ipmi message handler version 39.2 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:09: driver attached brd: module loaded loop: module loaded Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. tg3.c:v3.94 (August 14, 2008) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:9f:6f:17 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:0c:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iwl3945 0000:0c:00.0: PCI INT A disabled console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02) pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6fa0-0x6fa7 Probing IDE interface ide0... hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. pnp: the driver 'ide' has been registered hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 4346 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 4346 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS722080K9A300, DCBOC54P, max UDMA/133 ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72208 DCBO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10 Yenta: CardBus bridge found at 0000:03:01.0 [1028:01fe] yenta_cardbus 0000:03:01.0: CardBus bridge, secondary bus 0000:04 yenta_cardbus 0000:03:01.0: IO window: 0x002000-0x0020ff yenta_cardbus 0000:03:01.0: IO window: 0x002400-0x0024ff yenta_cardbus 0000:03:01.0: PREFETCH window: 0x8c000000-0x8c3fffff yenta_cardbus 0000:03:01.0: MEM window: 0x88000000-0x8bffffff Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: supports USB remote wakeup ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2: status 0501 change 0001 hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc4-hh1 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1a.7: port 2 full speed --> companion ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub firewire_core: created device fw0: GUID 464fc0000e451870, S400 ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 5: status 0501 change 0001 hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc4-hh1 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: detected 2 ports uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.0: Performing full reset uhci_hcd 0000:00:1a.0: supports USB remote wakeup uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 5 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: port 5 not reset yet, waiting 50ms uhci_hcd 0000:00:1a.0: port 2 portsc 009b,00 hub 3-0:1.0: port 2: status 0101 change 0003 ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020 hub 3-0:1.0: state 7 ports 2 chg 0004 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 3-0:1.0: port 2, status 0101, change 0000, 12 Mb/s usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc4-hh1 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: detected 2 ports uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1a.1: Performing full reset uhci_hcd 0000:00:1a.1: supports USB remote wakeup uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub usb 3-2: new full speed USB device using uhci_hcd and address 2 drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc4-hh1 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc4-hh1 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '006' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: default language 0x0409 usb usb6: uevent usb usb6: usb_probe_device usb usb6: configuration #1 chosen from 1 choice usb usb6: adding 6-0:1.0 (config #1, interface 0) usb 6-0:1.0: uevent hub 6-0:1.0: usb_probe_interface hub 6-0:1.0: usb_probe_interface - got id hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected hub 6-0:1.0: standalone hub hub 6-0:1.0: no power switching (usb 1.0) hub 6-0:1.0: individual port over-current protection hub 6-0:1.0: power on to power good time: 2ms hub 6-0:1.0: local power source is good hub 6-0:1.0: trying to enable port power on non-switchable hub usb 3-2: skipped 1 descriptor after interface usb 3-2: uevent usb 3-2: usb_probe_device usb 3-2: configuration #1 chosen from 1 choice usb 3-2: adding 3-2:1.0 (config #1, interface 0) usb 3-2:1.0: uevent usb 3-2: adding 3-2:1.1 (config #1, interface 1) usb 3-2:1.1: uevent usb 3-2: adding 3-2:1.2 (config #1, interface 2) usb 3-2:1.2: uevent drivers/usb/core/inode.c: creating file '002' usb 3-2: New USB device found, idVendor=413c, idProduct=8140 usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27-rc4-hh1 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '007' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: default language 0x0409 usb usb7: uevent usb usb7: usb_probe_device usb usb7: configuration #1 chosen from 1 choice usb usb7: adding 7-0:1.0 (config #1, interface 0) usb 7-0:1.0: uevent hub 7-0:1.0: usb_probe_interface hub 7-0:1.0: usb_probe_interface - got id hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected hub 7-0:1.0: standalone hub hub 7-0:1.0: no power switching (usb 1.0) hub 7-0:1.0: individual port over-current protection hub 7-0:1.0: power on to power good time: 2ms hub 7-0:1.0: local power source is good hub 7-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.2: port 1 portsc 009b,00 hub 7-0:1.0: port 1: status 0101 change 0003 hub 7-0:1.0: state 7 ports 2 chg 0002 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 7-0:1.0: port 1, status 0101, change 0000, 12 Mb/s usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27-rc4-hh1 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb 7-1: new full speed USB device using uhci_hcd and address 2 usb 7-1: ep0 maxpacket = 8 usb 7-1: uevent usb 7-1: usb_probe_device usb 7-1: configuration #1 chosen from 1 choice usb 7-1: adding 7-1:1.0 (config #1, interface 0) usb 7-1:1.0: uevent hub 7-1:1.0: usb_probe_interface hub 7-1:1.0: usb_probe_interface - got id hub 7-1:1.0: USB hub found hub 7-1:1.0: 4 ports detected hub 7-1:1.0: compound device; port removable status: RFRR hub 7-1:1.0: individual port power switching hub 7-1:1.0: individual port over-current protection hub 7-1:1.0: power on to power good time: 100ms hub 7-1:1.0: local power source is lost (inactive) hub 7-1:1.0: enabling power on all ports hub 7-1:1.0: port 2: status 0101 change 0001 uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us drivers/usb/core/inode.c: creating file '002' usb 7-1: New USB device found, idVendor=0b97, idProduct=7761 usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 7-1:1.0: state 7 ports 4 chg 0004 evt 0000 hub 7-1:1.0: port 2, status 0101, change 0000, 12 Mb/s usb 7-1.2: new full speed USB device using uhci_hcd and address 3 usb 7-1.2: skipped 1 descriptor after endpoint usb 7-1.2: default language 0x0409 usb 7-1.2: uevent usb 7-1.2: usb_probe_device usb 7-1.2: configuration #1 chosen from 1 choice usb 7-1.2: adding 7-1.2:1.0 (config #1, interface 0) usb 7-1.2:1.0: uevent drivers/usb/core/inode.c: creating file '003' usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772 usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1.2: Product: O2Micro CCID SC Reader usb 7-1.2: Manufacturer: O2 hub 7-1:1.0: state 7 ports 4 chg 0000 evt 0004 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:02: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:01: driver attached PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usb usb4: suspend_rh (auto-stop) usb usb5: suspend_rh (auto-stop) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 pnp: the driver 'rtc_cmos' has been registered rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs rtc_cmos 00:03: driver attached i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 usb usb6: suspend_rh (auto-stop) input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Driver for HIFN 795x crypto accelerator chip has been successfully registered. dca service started, version 1.4 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA device list: #0: HDA Intel at 0xf6ffc000 irq 21 IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered TCP westwood registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:03: setting system clock to 2008-08-30 11:03:09 UTC (1220094189) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 1176k freed Write protecting the kernel read-only data: 5504k hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1a.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh hub 5-0:1.0: hub_suspend usb usb5: bus auto-suspend usb usb5: suspend_rh hub 6-0:1.0: hub_suspend usb usb6: bus auto-suspend usb usb6: suspend_rh Clocksource tsc unstable (delta = -69822802 ns) usb usb3: uevent usb 3-0:1.0: uevent usb 3-2: uevent usb 3-2:1.0: uevent usb 3-2:1.1: uevent usb 3-2:1.2: uevent usb usb4: uevent usb 4-0:1.0: uevent usb usb1: uevent usb 1-0:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usb usb6: uevent usb 6-0:1.0: uevent usb usb7: uevent usb 7-0:1.0: uevent usb 7-1: uevent usb 7-1.2: uevent usb 7-1.2:1.0: uevent usb 7-1:1.0: uevent usb usb2: uevent usb 2-0:1.0: uevent Bluetooth: Generic Bluetooth USB driver ver 0.3 btusb 3-2:1.0: usb_probe_interface btusb 3-2:1.0: usb_probe_interface - got id btusb 3-2:1.2: usb_probe_interface btusb 3-2:1.2: usb_probe_interface - got id usbcore: registered new interface driver btusb ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added loadkeys[1699]: segfault at 5a0 ip 00007fd4db914af9 sp 00007fffe4144f58 error 4 in libconsole.so.0.0.0[7fd4db902000+19000] Adding 3903752k swap on /dev/sda7. Priority:-1 extents:1 across:3903752k EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 ADDRCONF(NETDEV_UP): eth0: link is not ready iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) firmware: requesting iwlwifi-3945-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready warning: `ntpd' uses 32-bit capabilities (legacy support in use) wlan0: authenticate with AP 00:0d:54:a4:4c:4f wlan0: authenticated wlan0: associate with AP 00:0d:54:a4:4c:4f wlan0: RX AssocResp from 00:0d:54:a4:4c:4f (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html wlan0: no IPv6 routers present tun0: Disabled Privacy Extensions