Linux version 2.6.27-rc5 (lcapitulino@build1.conectiva) (gcc version 4.3.2 (GCC) ) #43 SMP Tue Sep 2 16:25:20 BRT 2008 Command line: root=UUID=4c906e0e-7507-11dd-8b10-0019bbeb0788 hpet=disable KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) BIOS-e820: 000000003bf00000 - 000000003bf16000 (ACPI data) BIOS-e820: 000000003bf16000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) last_pfn = 0x3bf00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003be00000 page 2M 003be00000 - 003bf00000 page 4k kernel direct mapping tables up to 3bf00000 @ 8000-b000 last_map_addr: 3bf00000 end: 3bf00000 RAMDISK: 37c00000 - 37feff45 DMI present. Compaq Presario V6000: using 0xed I/O delay port ACPI: RSDP 000F88F0, 0014 (r0 HP ) ACPI: RSDT 3BF0CE48, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) ACPI: FACP 3BF15D10, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) ACPI: DSDT 3BF0CE84, 8E8C (r1 HP MCP51M 6040000 MSFT 3000000) ACPI: FACS 3BF16FC0, 0040 ACPI: SSDT 3BF15D84, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: MCFG 3BF15F06, 003C (r1 HP MCFG 6040000 LTP 0) ACPI: HPET 3BF15F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 3BF15F7A, 005E (r1 HP APIC 6040000 LTP 0) ACPI: BOOT 3BF15FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) ACPI: DMI detected: Hewlett-Packard Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003bf00000 Bootmem setup node 0 0000000000000000-000000003bf00000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000009000 - 00000000000107df] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003bf00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000d80350] TEXT DATA BSS ==> [0000200000 - 0000d80350] #3 [0037c00000 - 0037feff45] RAMDISK ==> [0037c00000 - 0037feff45] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f8920] 000f8920 [ffffe20000000000-ffffe200015fffff] PMD -> [ffff880001200000-ffff8800027fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003bf00 On node 0 totalpages: 245405 DMA zone: 861 pages, LIFO batch:0 DMA32 zone: 236221 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) PERCPU: Allocating 52384 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 237082 Policy zone: DMA32 Kernel command line: root=UUID=4c906e0e-7507-11dd-8b10-0019bbeb0788 hpet=disable Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Detected 1607.315 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 3839 kB per task-struct memory footprint: 1920 bytes Checking aperture... No AGP bridge found Node 0: aperture @ 3b40000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 942996k/982016k available (2720k kernel code, 38624k reserved, 1461k data, 472k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.63 BogoMIPS (lpj=1607315) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 003bf80000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557224 Detected 12.557 MHz APIC timer. lockdep: fixing up alternatives. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3214.68 BogoMIPS (lpj=1607340) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 System has C1E enabled CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 Brought up 2 CPUs Total of 2 processors activated (6429.31 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU0 net_namespace: 696 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e06fffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: supports D1 pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: supports D1 pci 0000:00:0b.1: supports D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:14.0: supports D1 pci 0000:00:14.0: supports D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled PCI: bridge 0000:00:02.0 io port: [4000, 4fff] PCI: bridge 0000:00:02.0 32bit mmio: [b4000000, b7ffffff] PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, d01fffff] PCI: bridge 0000:00:03.0 io port: [5000, 5fff] PCI: bridge 0000:00:03.0 32bit mmio: [b8000000, bbffffff] PCI: bridge 0000:00:03.0 64bit mmio pref: [d0200000, d03fffff] pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11 ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *10) ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing DMAR:parse DMAR table failure. ACPI: RTC can wake from S4 system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1080-0x10ff has been reserved system 00:04: ioport range 0x1400-0x147f has been reserved system 00:04: ioport range 0x1480-0x14ff has been reserved system 00:04: ioport range 0x1800-0x187f has been reserved system 00:04: ioport range 0x1880-0x18ff has been reserved system 00:04: ioport range 0x2000-0x203f has been reserved system 00:05: ioport range 0x360-0x361 has been reserved system 00:05: ioport range 0x380-0x383 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0x4000-0x4fff pci 0000:00:02.0: MEM window: 0xb4000000-0xb7ffffff Switched to high resolution mode on CPU 0 pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: 0x5000-0x5fff pci 0000:00:03.0: MEM window: 0xb8000000-0xbbffffff pci 0000:00:03.0: PREFETCH window: 0x000000d0200000-0x000000d03fffff pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [4000, 4fff] bus: 01 index 1 mmio: [b4000000, b7ffffff] bus: 01 index 2 mmio: [d0000000, d01fffff] bus: 01 index 3 mmio: [0, 0] bus: 03 index 0 io port: [5000, 5fff] bus: 03 index 1 mmio: [b8000000, bbffffff] bus: 03 index 2 mmio: [d0200000, d03fffff] bus: 03 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 io port: [0, ffff] bus: 07 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 4031k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1220383874.737:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1849 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:02.0: Enabling HT MSI Mapping pci 0000:00:03.0: Enabling HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie03: allocate port service hpet_acpi_add: no address or irqs in _CRS Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 472k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc5 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. sata_nv 0000:00:0e.0: version 3.5 sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 sata_nv 0000:00:0e.0: Using SWNCQ mode sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HTS541010G9SA00, MBZOC60P, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk pata_amd 0000:00:0d.0: version 0.3.10 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 ata3.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.05, max MWDMA2 ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) ata3.00: configured for MWDMA2 ata4: port disabled. ignoring. scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.05 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (57 C) ACPI: AC Adapter [ACAD] (on-line) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] ACPI: Battery Slot [BAT0] (battery present) ACPI: WMI: Mapper loaded sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 isp1760 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 memory length for this resource is less than required isp1760: probe of 0000:00:14.0 failed with error -12 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. forcedeth 0000:00:14.0: setting latency timer to 64 forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:bb:eb:07:88 forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 Non-volatile memory driver v1.2 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e floppy0: no floppy controllers found EXT3 FS on sda9, internal journal loop: module loaded Adding 257000k swap on /dev/sda1. Priority:-1 extents:1 across:257000k Clocksource tsc unstable (delta = -140906693 ns) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver NET: Registered protocol family 17 evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html martian source 255.255.255.255 from 10.0.4.193, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:11:2f:a8:02:be:08:00