Linux version 2.6.27-rc5 (mingo@dione) (gcc version 4.2.3) #29725 SMP Sat Sep 6 14:53:16 CEST 2008 Command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi maxcpus=1 no_hz=off noapic nolapic_timer lapic idle=poll pci=nomsi KERNEL supported cpus: Intel GenuineIntel Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ed94000 (usable) BIOS-e820: 000000003ed94000 - 000000003ee4e000 (ACPI NVS) BIOS-e820: 000000003ee4e000 - 000000003fea2000 (usable) BIOS-e820: 000000003fea2000 - 000000003fee9000 (ACPI NVS) BIOS-e820: 000000003fee9000 - 000000003feed000 (usable) BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (usable) console [earlyser0] enabled debug: ignoring loglevel setting. using polling idle threads. last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003fe00000 page 2M 003fe00000 - 003ff00000 page 4k kernel direct mapping tables up to 3ff00000 @ 8000-b000 last_map_addr: 3ff00000 end: 3ff00000 ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 3FEFDE48, 0050 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: FACP 3FEFCF10, 0074 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: DSDT 3FEF8010, 3E70 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: FACS 3FEDFC40, 0040 ACPI: APIC 3FEFCE10, 0078 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: WDDT 3FEF7F90, 0040 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: MCFG 3FEF7F10, 003C (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: ASF! 3FEFCD10, 00A6 (r32 INTEL D975XBX 4B9 MSFT 1000013) ACPI: HPET 3FEF7E90, 0038 (r1 INTEL D975XBX 4B9 MSFT 1000013) ACPI: SSDT 3FEFDC10, 01BC (r1 INTEL CpuPm 4B9 MSFT 1000013) ACPI: SSDT 3FEFDA10, 01B7 (r1 INTEL Cpu0Ist 4B9 MSFT 1000013) ACPI: SSDT 3FEFD810, 01B7 (r1 INTEL Cpu1Ist 4B9 MSFT 1000013) ACPI: SSDT 3FEFD610, 01B7 (r1 INTEL Cpu2Ist 4B9 MSFT 1000013) ACPI: SSDT 3FEFD410, 01B7 (r1 INTEL Cpu3Ist 4B9 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000003ff00000 Bootmem setup node 0 0000000000000000-000000003ff00000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000009000 - 0000000000010fdf] pages 8 (5 early reservations) ==> bootmem [0000000000 - 003ff00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000170d1c8] TEXT DATA BSS ==> [0000200000 - 000170d1c8] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. found SMP MP-table at [ffff8800000fe680] 000fe680 [ffffe20000000000-ffffe200019fffff] PMD -> [ffff880001a00000-ffff8800033fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003ed94 0: 0x0003ee4e -> 0x0003fea2 0: 0x0003fee9 -> 0x0003feed 0: 0x0003feff -> 0x0003ff00 On node 0 totalpages: 261516 DMA zone: 3793 pages, LIFO batch:0 DMA32 zone: 250971 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor) Bus #0 is ISA Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 0, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 Int: type 0, pol 0, trig 0, bus 00, IRQ 09, APIC ID 0, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f Int: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 00 Processors: 2 SMP: Allowing 4 CPUs, 2 hotplug CPUs mapped APIC to ffffffffff5fc000 ( fee00000) Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000) dyn_array irq_2_pin_head+0x0/0x8 size:0x10 nr:256 align:0x1000 dyn_array irq_cfgx+0x0/0x8 size:0x28 nr:32 align:0x1000 dyn_array irq_desc+0x0/0x8 size:0x100 nr:32 align:0x1000 dyn_array irq_timer_state+0x0/0x10 size:0x8 nr:32 align:0x1000 dyn_array total_size: 0x5000 dyn_array irq_2_pin_head+0x0/0x8 ==> [0x17a1000 - 0x17a2000] dyn_array irq_cfgx+0x0/0x8 ==> [0x17a2000 - 0x17a2500] dyn_array irq_desc+0x0/0x8 ==> [0x17a3000 - 0x17a5000] kstat_irqs ==> [0x17a6000 - 0x17a6200] dyn_array irq_timer_state+0x0/0x10 ==> [0x17a5000 - 0x17a5100] PERCPU: Allocating 1622016 bytes of per cpu data per cpu data for cpu0 on node0 at 0000000001812000 per cpu data for cpu1 on node0 at 0000000003400000 per cpu data for cpu2 on node0 at 000000000358c000 per cpu data for cpu3 on node0 at 0000000003718000 NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 254764 Policy zone: DMA32 Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi maxcpus=1 no_hz=off noapic nolapic_timer lapic idle=poll pci=nomsi kernel profiling enabled (shift: 0) debug: sysrq always enabled. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2933.308 MHz processor. Console: colour VGA+ 80x25 console handover: boot [earlyser0] -> real [tty0] console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 4095 kB per task-struct memory footprint: 2688 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 961032k/1047552k available (7469k kernel code, 85032k reserved, 3741k data, 2120k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.61 BogoMIPS (lpj=11733232) Security Framework initialized SELinux: Initializing. SELinux: Starting in enforcing mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) numa_add_cpu cpu 0 node 0: mask now 0 lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20080609 ACPI: setting ELCR to 0200 (from 0e00) Setting APIC routing to flat enabled ExtINT on CPU#0 CPU0: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05 Disabling APIC timer calling migration_init+0x0/0x60 initcall migration_init+0x0/0x60 returned 1 after 0 msecs initcall migration_init+0x0/0x60 returned with error code 1 calling spawn_ksoftirqd+0x0/0x60 initcall spawn_ksoftirqd+0x0/0x60 returned 0 after 0 msecs calling init_call_single_data+0x0/0x80 initcall init_call_single_data+0x0/0x80 returned 0 after 0 msecs calling spawn_softlockup_task+0x0/0x80 initcall spawn_softlockup_task+0x0/0x80 returned 0 after 0 msecs calling relay_init+0x0/0x20 initcall relay_init+0x0/0x20 returned 0 after 0 msecs Brought up 1 CPUs Total of 1 processors activated (5866.61 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 calling init_cpufreq_transition_notifier_list+0x0/0x20 initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs calling net_ns_init+0x0/0x1a0 net_namespace: 1672 bytes initcall net_ns_init+0x0/0x1a0 returned 0 after 3 msecs calling cpufreq_tsc+0x0/0x40 initcall cpufreq_tsc+0x0/0x40 returned 0 after 0 msecs calling init_smp_flush+0x0/0x70 initcall init_smp_flush+0x0/0x70 returned 0 after 0 msecs calling print_banner+0x0/0x20 Booting paravirtualized kernel on bare hardware initcall print_banner+0x0/0x20 returned 0 after 3 msecs calling sysctl_init+0x0/0x40 initcall sysctl_init+0x0/0x40 returned 0 after 0 msecs calling ksysfs_init+0x0/0xc0 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0x20 initcall init_jiffies_clocksource+0x0/0x20 returned 0 after 0 msecs calling pm_init+0x0/0x40 initcall pm_init+0x0/0x40 returned 0 after 0 msecs calling ftrace_dynamic_init+0x0/0xf0 initcall ftrace_dynamic_init+0x0/0xf0 returned 0 after 0 msecs calling filelock_init+0x0/0x40 initcall filelock_init+0x0/0x40 returned 0 after 0 msecs calling init_script_binfmt+0x0/0x20 initcall init_script_binfmt+0x0/0x20 returned 0 after 0 msecs calling init_elf_binfmt+0x0/0x20 initcall init_elf_binfmt+0x0/0x20 returned 0 after 0 msecs calling init_compat_elf_binfmt+0x0/0x20 initcall init_compat_elf_binfmt+0x0/0x20 returned 0 after 0 msecs calling debugfs_init+0x0/0x70 initcall debugfs_init+0x0/0x70 returned 0 after 0 msecs calling securityfs_init+0x0/0x70 initcall securityfs_init+0x0/0x70 returned 0 after 0 msecs calling random32_init+0x0/0x100 initcall random32_init+0x0/0x100 returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x90 initcall cpufreq_core_init+0x0/0x90 returned 0 after 0 msecs calling sock_init+0x0/0x70 initcall sock_init+0x0/0x70 returned 0 after 3 msecs calling netpoll_init+0x0/0x50 initcall netpoll_init+0x0/0x50 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x180 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x180 returned 0 after 0 msecs calling bdi_class_init+0x0/0x50 initcall bdi_class_init+0x0/0x50 returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x50 initcall kobject_uevent_init+0x0/0x50 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x20 initcall pcibus_class_init+0x0/0x20 returned 0 after 0 msecs calling pci_driver_init+0x0/0x20 initcall pci_driver_init+0x0/0x20 returned 0 after 0 msecs calling backlight_class_init+0x0/0x60 initcall backlight_class_init+0x0/0x60 returned 0 after 0 msecs calling dock_init+0x0/0x5f No dock devices found. initcall dock_init+0x0/0x5f returned 0 after 3 msecs calling tty_class_init+0x0/0x40 initcall tty_class_init+0x0/0x40 returned 0 after 3 msecs calling vtconsole_class_init+0x0/0xf0 initcall vtconsole_class_init+0x0/0xf0 returned 0 after 0 msecs calling register_node_type+0x0/0x80 initcall register_node_type+0x0/0x80 returned 0 after 0 msecs calling amd_postcore_init+0x0/0x8d0 initcall amd_postcore_init+0x0/0x8d0 returned 0 after 0 msecs calling arch_kdebugfs_init+0x0/0x1f0 initcall arch_kdebugfs_init+0x0/0x1f0 returned 0 after 0 msecs calling mtrr_if_init+0x0/0x90 initcall mtrr_if_init+0x0/0x90 returned 0 after 0 msecs calling ffh_cstate_init+0x0/0x50 initcall ffh_cstate_init+0x0/0x50 returned 0 after 0 msecs calling acpi_pci_init+0x0/0x60 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x60 returned 0 after 3 msecs calling init_acpi_device_notify+0x0/0x50 initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs calling pci_arch_init+0x0/0x60 PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x60 returned 0 after 11 msecs calling topology_init+0x0/0x80 initcall topology_init+0x0/0x80 returned 0 after 0 msecs calling mtrr_init_finialize+0x0/0x50 initcall mtrr_init_finialize+0x0/0x50 returned 0 after 0 msecs calling param_sysfs_init+0x0/0x250 initcall param_sysfs_init+0x0/0x250 returned 0 after 22 msecs calling pm_sysrq_init+0x0/0x20 initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 msecs calling readahead_init+0x0/0x40 initcall readahead_init+0x0/0x40 returned 0 after 0 msecs calling init_bio+0x0/0x110 initcall init_bio+0x0/0x110 returned 0 after 0 msecs calling integrity_init+0x0/0x40 initcall integrity_init+0x0/0x40 returned 0 after 0 msecs calling blk_settings_init+0x0/0x40 initcall blk_settings_init+0x0/0x40 returned 0 after 0 msecs calling blk_ioc_init+0x0/0x30 initcall blk_ioc_init+0x0/0x30 returned 0 after 0 msecs calling genhd_device_init+0x0/0x60 initcall genhd_device_init+0x0/0x60 returned 0 after 0 msecs calling blk_dev_integrity_init+0x0/0x30 initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0 msecs calling pci_slot_init+0x0/0x50 initcall pci_slot_init+0x0/0x50 returned 0 after 0 msecs calling acpi_init+0x0/0x226 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using PIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG at f0000000 - f3ffffff initcall acpi_init+0x0/0x226 returned 0 after 68 msecs calling acpi_scan_init+0x0/0x115 initcall acpi_scan_init+0x0/0x115 returned 0 after 26 msecs calling acpi_ec_init+0x0/0x66 initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs calling acpi_pci_root_init+0x0/0x2d ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Scanning bus 0000:00 pci 0000:00:00.0: found [8086/277c] class 000600 header type 00 pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:01.0: found [8086/277d] class 000604 header type 01 pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: found [8086/27d8] class 000403 header type 00 PCI: 0000:00:1b.0 reg 10 64bit mmio: [50400000, 50403fff] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: found [8086/27d0] class 000604 header type 01 pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: found [8086/27e0] class 000604 header type 01 pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: found [8086/27e2] class 000604 header type 01 pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: found [8086/27c8] class 000c03 header type 00 PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1d.1: found [8086/27c9] class 000c03 header type 00 PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1d.2: found [8086/27ca] class 000c03 header type 00 PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1d.3: found [8086/27cb] class 000c03 header type 00 PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f] pci 0000:00:1d.3: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1d.7: found [8086/27cc] class 000c03 header type 00 PCI: 0000:00:1d.7 reg 10 32bit mmio: [50404400, 504047ff] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: found [8086/244e] class 000604 header type 01 pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1f.0: found [8086/27b0] class 000601 header type 00 pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1f.1: found [8086/27df] class 000101 header type 00 PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf] pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1f.2: found [8086/27c0] class 000101 header type 00 PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf] PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7] PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7] PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3] PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af] PCI: 0000:00:1f.2 reg 24 32bit mmio: [50404000, 504043ff] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: found [8086/27da] class 000c05 header type 00 PCI: 0000:00:1f.3 reg 20 io port: [4000, 401f] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x40 PCI: Fixups for bus 0000:00 pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0 PCI: Scanning bus 0000:01 pci 0000:01:00.0: found [1002/7249] class 000300 header type 00 pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x30 PCI: 0000:01:00.0 reg 10 32bit mmio: [40000000, 4fffffff] PCI: 0000:01:00.0 reg 18 64bit mmio: [50300000, 5030ffff] PCI: 0000:01:00.0 reg 20 io port: [3000, 30ff] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 pci 0000:01:00.1: found [1002/7269] class 000380 header type 00 pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x30 PCI: 0000:01:00.1 reg 10 64bit mmio: [50310000, 5031ffff] pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 PCI: Fixups for bus 0000:01 PCI: bridge 0000:00:01.0 io port: [3000, 3fff] PCI: bridge 0000:00:01.0 32bit mmio: [50300000, 503fffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [40000000, 4fffffff] PCI: Bus scan for 0000:01 returning with max=01 pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0 PCI: Scanning bus 0000:02 pci 0000:02:00.0: found [1131/7162] class 000480 header type 00 PCI: 0000:02:00.0 reg 10 64bit mmio: [50200000, 502fffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 pci 0000:02:00.0: PME# disabled PCI: Fixups for bus 0000:02 PCI: bridge 0000:00:1c.0 32bit mmio: [50200000, 502fffff] PCI: Bus scan for 0000:02 returning with max=02 pci 0000:00:1c.4: scanning behind bridge, config 030300, pass 0 PCI: Scanning bus 0000:03 PCI: Fixups for bus 0000:03 PCI: Bus scan for 0000:03 returning with max=03 pci 0000:00:1c.5: scanning behind bridge, config 040400, pass 0 PCI: Scanning bus 0000:04 pci 0000:04:00.0: found [8086/109a] class 000200 header type 00 PCI: 0000:04:00.0 reg 10 32bit mmio: [50100000, 5011ffff] PCI: 0000:04:00.0 reg 18 io port: [2000, 201f] pci 0000:04:00.0: calling pci_fixup_transparent_bridge+0x0/0x40 pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled PCI: Fixups for bus 0000:04 PCI: bridge 0000:00:1c.5 io port: [2000, 2fff] PCI: bridge 0000:00:1c.5 32bit mmio: [50100000, 501fffff] PCI: Bus scan for 0000:04 returning with max=04 pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 0 PCI: Scanning bus 0000:05 pci 0000:05:02.0: found [1814/0301] class 000280 header type 00 PCI: 0000:05:02.0 reg 10 32bit mmio: [50000000, 50007fff] pci 0000:05:04.0: found [104c/8024] class 000c00 header type 00 PCI: 0000:05:04.0 reg 10 32bit mmio: [5000c000, 5000c7ff] PCI: 0000:05:04.0 reg 14 32bit mmio: [50008000, 5000bfff] pci 0000:05:04.0: supports D1 pci 0000:05:04.0: supports D2 pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:04.0: PME# disabled pci 0000:05:05.0: found [1095/3114] class 000104 header type 00 PCI: 0000:05:05.0 reg 10 io port: [1018, 101f] PCI: 0000:05:05.0 reg 14 io port: [1024, 1027] PCI: 0000:05:05.0 reg 18 io port: [1010, 1017] PCI: 0000:05:05.0 reg 1c io port: [1020, 1023] PCI: 0000:05:05.0 reg 20 io port: [1000, 100f] PCI: 0000:05:05.0 reg 24 32bit mmio: [5000c800, 5000cbff] PCI: 0000:05:05.0 reg 30 32bit mmio: [fff80000, ffffffff] pci 0000:05:05.0: supports D1 pci 0000:05:05.0: supports D2 PCI: Fixups for bus 0000:05 pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [1000, 1fff] PCI: bridge 0000:00:1e.0 32bit mmio: [50000000, 500fffff] PCI: Bus scan for 0000:05 returning with max=05 pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1 pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1 pci 0000:00:1c.4: scanning behind bridge, config 030300, pass 1 pci 0000:00:1c.5: scanning behind bridge, config 040400, pass 1 pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 1 PCI: Bus scan for 0000:00 returning with max=05 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 602 msecs calling acpi_pci_link_init+0x0/0x4d ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) initcall acpi_pci_link_init+0x0/0x4d returned 0 after 45 msecs calling acpi_power_init+0x0/0x7c initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs calling acpi_system_init+0x0/0x26f initcall acpi_system_init+0x0/0x26f returned 0 after 0 msecs calling pnp_init+0x0/0x30 Linux Plug and Play Support v0.97 (c) Adam Belay initcall pnp_init+0x0/0x30 returned 0 after 3 msecs calling pnpacpi_init+0x0/0xa0 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0xa0 returned 0 after 19 msecs calling misc_init+0x0/0xb0 initcall misc_init+0x0/0xb0 returned 0 after 0 msecs calling tifm_init+0x0/0x90 initcall tifm_init+0x0/0x90 returned 0 after 0 msecs calling phy_init+0x0/0x50 initcall phy_init+0x0/0x50 returned 0 after 0 msecs calling init_scsi+0x0/0xa0 SCSI subsystem initialized initcall init_scsi+0x0/0xa0 returned 0 after 0 msecs calling ata_init+0x0/0x3c0 libata version 3.00 loaded. initcall ata_init+0x0/0x3c0 returned 0 after 3 msecs calling spi_init+0x0/0xa0 initcall spi_init+0x0/0xa0 returned 0 after 0 msecs calling init_pcmcia_cs+0x0/0x40 initcall init_pcmcia_cs+0x0/0x40 returned 0 after 0 msecs calling usb_init+0x0/0x120 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x120 returned 0 after 11 msecs calling serio_init+0x0/0xb0 initcall serio_init+0x0/0xb0 returned 0 after 0 msecs calling gameport_init+0x0/0xb0 initcall gameport_init+0x0/0xb0 returned 0 after 0 msecs calling input_init+0x0/0x130 initcall input_init+0x0/0x130 returned 0 after 0 msecs calling rtc_init+0x0/0x80 initcall rtc_init+0x0/0x80 returned 0 after 0 msecs calling hwmon_init+0x0/0x50 initcall hwmon_init+0x0/0x50 returned 0 after 3 msecs calling thermal_init+0x0/0x60 initcall thermal_init+0x0/0x60 returned 0 after 0 msecs calling leds_init+0x0/0x40 initcall leds_init+0x0/0x40 returned 0 after 0 msecs calling dma_bus_init+0x0/0x40 initcall dma_bus_init+0x0/0x40 returned 0 after 0 msecs calling ac97_bus_init+0x0/0x20 initcall ac97_bus_init+0x0/0x20 returned 0 after 0 msecs calling pci_subsys_init+0x0/0x140 PCI: Using ACPI for IRQ routing initcall pci_subsys_init+0x0/0x140 returned 0 after 3 msecs calling proto_init+0x0/0x40 initcall proto_init+0x0/0x40 returned 0 after 0 msecs calling net_dev_init+0x0/0x200 initcall net_dev_init+0x0/0x200 returned 0 after 0 msecs calling neigh_init+0x0/0x80 initcall neigh_init+0x0/0x80 returned 0 after 0 msecs calling fib_rules_init+0x0/0xc0 initcall fib_rules_init+0x0/0xc0 returned 0 after 0 msecs calling genl_init+0x0/0xe0 initcall genl_init+0x0/0xe0 returned 0 after 15 msecs calling irda_init+0x0/0xc0 irda_init() NET: Registered protocol family 23 initcall irda_init+0x0/0xc0 returned 0 after 3 msecs calling wireless_nlevent_init+0x0/0x50 initcall wireless_nlevent_init+0x0/0x50 returned 0 after 0 msecs calling cfg80211_init+0x0/0x70 initcall cfg80211_init+0x0/0x70 returned 0 after 11 msecs calling ieee80211_init+0x0/0x30 initcall ieee80211_init+0x0/0x30 returned 0 after 0 msecs calling sysctl_init+0x0/0x51 initcall sysctl_init+0x0/0x51 returned 0 after 0 msecs calling pci_iommu_init+0x0/0x20 PCI-GART: No AMD northbridge found. initcall pci_iommu_init+0x0/0x20 returned 0 after 0 msecs calling print_all_ICs+0x0/0x520 printing PIC contents ... PIC IMR: fdfa ... PIC IRR: 0c00 ... PIC ISR: 0000 ... PIC ELCR: 0200 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 ... APIC TASKPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 00000200 ... APIC ICR2: 01000000 ... APIC LVTT: 00010000 ... APIC LVTPC: 00010000 ... APIC LVT0: 00001700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000000 number of MP IRQ sources: 16. testing the IO APIC....................... IRQ to pin mappings: .................................... done. initcall print_all_ICs+0x0/0x520 returned 0 after 26 msecs calling hpet_late_init+0x0/0x1c0 BUG: unable to handle kernel NULL pointer dereference at 000000000000008c IP: [] hpet_late_init+0xfe/0x1c0 PGD 0 Oops: 0000 [1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #29725 RIP: 0010:[] [] hpet_late_init+0xfe/0x1c0 RSP: 0018:ffff88003fa07dd0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffffc20000000160 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff88003fa07e90 R08: 0000000000000000 R09: ffff88003fa07dd0 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003fa07dd0 R13: 0000000000000002 R14: ffffc20000000000 R15: 000000006f57e511 FS: 0000000000000000(0000) GS:ffffffff80cf6a80(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000008c CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88003fa06000, task ffff88003fa08000) Stack: 00000000fed00000 ffffc20000000000 0000000100000003 0000000800000002 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 Call Trace: [] ? hpet_late_init+0x0/0x1c0 [] do_one_initcall+0x45/0x190 [] ? register_irq_proc+0x19/0xe0 [] ? early_idt_handler+0x0/0x73 [] kernel_init+0x14c/0x1b0 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] child_rip+0xa/0x11 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0x1b0 [] ? child_rip+0x0/0x11 Code: 20 48 83 c1 01 48 39 f1 75 e3 44 89 e8 4c 8b 05 29 29 22 00 31 f6 48 8d 78 01 66 66 90 89 f0 48 8d 04 80 48 c1 e0 05 4a 8d 0c 00 81 8c 00 00 00 08 74 26 8b 81 80 00 00 00 8b 91 88 00 00 00 RIP [] hpet_late_init+0xfe/0x1c0 RSP CR2: 000000000000008c Kernel panic - not syncing: Fatal exception Rebooting in 1 seconds..Press any key to enter the menu